Cisco

Multiple vulnerabilities in the web-based management interface of Cisco Prime Infrastructure and Cisco Evolved Programmable Network Manager (EPNM) could allow a remote attacker to obtain privileged information and conduct cross-site scripting (XSS) and cross-site request forgery (CSRF) attacks. For more information about these vulnerabilities, see the Details section of this advisory.Show less

A vulnerability in the web-based management interface of Cisco Small Business RV016, RV042, RV042G, RV082, RV320, and RV325 Routers could allow an authenticated, remote attacker to execute arbitrary commands on an affected device. This vulnerability is due to improper validation of user input within incoming HTTP packets. An attacker could exploit this vulnerability by sending a crafted HTTP request to the web-based management interface. A successful exploit could allow the attacker to gain root-level privileges and access unauthorized data. To exploit this vulnerability, an attacker would need to have valid administrative credentials on the affected device. Cisco has not released software updates that address this vulnerability.Show less

A vulnerability in the Vector Packet Processor (VPP) of Cisco Packet Data Network Gateway (PGW) could allow an unauthenticated, remote attacker to stop ICMP traffic from being processed over an IPsec connection. This vulnerability is due to the VPP improperly handling a malformed packet. An attacker could exploit this vulnerability by sending a malformed Encapsulating Security Payload (ESP) packet over an IPsec connection. A successful exploit could allow the attacker to stop ICMP traffic over an IPsec connection and cause a denial of service (DoS).Show less

A vulnerability in the web-based management interface of Cisco RV340, RV340W, RV345, and RV345P Dual WAN Gigabit VPN Routers could allow an unauthenticated, remote attacker to upload arbitrary files to an affected device. This vulnerability is due to insufficient authorization enforcement mechanisms in the context of file uploads. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected device. A successful exploit could allow the attacker to upload arbitrary files to the affected device.Show less

A vulnerability in the web-based management interface of Cisco Prime Infrastructure Software could allow an unauthenticated, remote attacker to conduct a reflected cross-site scripting (XSS) attack against a user of the interface on an affected device. This vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by persuading a user of the web-based management interface on an affected device to click a crafted link. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or to access sensitive, browser-based information.Show less

A vulnerability in the web-based management interface of Cisco Identity Services Engine (ISE) could allow an authenticated, remote attacker to access sensitive information, conduct a server-side request forgery (SSRF) attack through an affected device, or negatively impact the responsiveness of the web-based management interface itself. This vulnerability is due to improper handling of XML External Entity (XXE) entries when parsing certain XML files. An attacker could exploit this vulnerability by uploading a crafted XML file that contains references to external entities. A successful exploit could allow the attacker to retrieve files from the local system, resulting in the disclosure of confidential information. A successful exploit could also cause the web application to perform arbitrary HTTP requests on behalf of the attacker or consume memory resources to reduce the availability of the web-based management interface. To successfully exploit this vulnerability, an attacker would need valid Super Admin or Policy Admin credentials.Show less

Multiple vulnerabilities in specific Cisco Identity Services Engine (ISE) CLI commands could allow an authenticated, local attacker to perform command injection attacks on the underlying operating system and elevate privileges to root. To exploit these vulnerabilities, an attacker must have valid Administrator privileges on the affected device. These vulnerabilities are due to insufficient validation of user-supplied input. An attacker could exploit these vulnerabilities by submitting a crafted CLI command. A successful exploit could allow the attacker to elevate privileges to root.Show less

Multiple vulnerabilities in specific Cisco Identity Services Engine (ISE) CLI commands could allow an authenticated, local attacker to perform command injection attacks on the underlying operating system and elevate privileges to root. To exploit these vulnerabilities, an attacker must have valid Administrator privileges on the affected device. These vulnerabilities are due to insufficient validation of user-supplied input. An attacker could exploit these vulnerabilities by submitting a crafted CLI command. A successful exploit could allow the attacker to elevate privileges to root.Show less

Multiple vulnerabilities in specific Cisco Identity Services Engine (ISE) CLI commands could allow an authenticated, local attacker to perform command injection attacks on the underlying operating system and elevate privileges to root. To exploit these vulnerabilities, an attacker must have valid Administrator privileges on the affected device. These vulnerabilities are due to insufficient validation of user-supplied input. An attacker could exploit these vulnerabilities by submitting a crafted CLI command. A successful exploit could allow the attacker to elevate privileges to root.Show less

A vulnerability in the web-based management interface of Cisco SD-WAN vManage Software could allow an unauthenticated, remote attacker to conduct a cross-site request forgery (CSRF) attack on an affected system. This vulnerability is due to insufficient CSRF protections for the web-based management interface on an affected system. An attacker could exploit this vulnerability by persuading a user of the interface to click a malicious link. A successful exploit could allow the attacker to perform arbitrary actions with the privilege level of the affected user. These actions could include modifying the system configuration and deleting accounts.Show less

A vulnerability in Cisco access point (AP) software could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to insufficient validation of certain parameters within 802.11 frames. An attacker could exploit this vulnerability by sending a wireless 802.11 association request frame with crafted parameters to an affected device. A successful exploit could allow the attacker to cause an unexpected reload of an affected device, resulting in a DoS condition.Show less

A vulnerability in the deterministic random bit generator (DRBG), also known as pseudorandom number generator (PRNG), in Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software for Cisco ASA 5506-X, ASA 5508-X, and ASA 5516-X Firewalls could allow an unauthenticated, remote attacker to cause a cryptographic collision, enabling the attacker to discover the private key of an affected device. This vulnerability is due to insufficient entropy in the DRBG for the affected hardware platforms when generating cryptographic keys. An attacker could exploit this vulnerability by generating a large number of cryptographic keys on an affected device and looking for collisions with target devices. A successful exploit could allow the attacker to impersonate an affected target device or to decrypt traffic secured by an affected key that is sent to or from an affected target device.Show less

A vulnerability in the access point (AP) joining process of the Control and Provisioning of Wireless Access Points (CAPWAP) protocol of Cisco IOS XE Software for Wireless LAN Controllers (WLCs) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to a logic error that occurs when certain conditions are met during the AP joining process. An attacker could exploit this vulnerability by adding an AP that is under their control to the network. The attacker then must ensure that the AP successfully joins an affected wireless controller under certain conditions. Additionally, the attacker would need the ability to restart a valid AP that was previously connected to the controller. A successful exploit could allow the attacker to cause the affected device to restart unexpectedly, resulting in a DoS condition.Show less

A vulnerability in Cisco access points (AP) software could allow an authenticated, local attacker to inject arbitrary commands and execute them with root privileges. This vulnerability is due to improper input validation of commands that are issued from a wireless controller to an AP. An attacker with Administrator access to the CLI of the controller could exploit this vulnerability by issuing a command with crafted arguments. A successful exploit could allow the attacker to gain full root access on the AP.Show less

A vulnerability in Cisco IOS XE Software for Cisco Catalyst 9300 Series Switches could allow an authenticated, local attacker with level-15 privileges or an unauthenticated attacker with physical access to the device to execute persistent code at boot time and break the chain of trust. This vulnerability is due to errors that occur when retrieving the public release key that is used for image signature verification. An attacker could exploit this vulnerability by modifying specific variables in the Serial Peripheral Interface (SPI) flash memory of an affected device. A successful exploit could allow the attacker to execute persistent code on the underlying operating system. Note: In Cisco IOS XE Software releases 16.11.1 and later, the complexity of an attack using this vulnerability is high. However, an attacker with level-15 privileges could easily downgrade the Cisco IOS XE Software on a device to a release that would lower the attack complexity.Show less

A vulnerability in the IPv6 DHCP (DHCPv6) client module of Cisco Adaptive Security Appliance (ASA) Software, Cisco Firepower Threat Defense (FTD) Software, Cisco IOS Software, and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to insufficient validation of DHCPv6 messages. An attacker could exploit this vulnerability by sending crafted DHCPv6 messages to an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition. Note: To successfully exploit this vulnerability, the attacker would need to either control the DHCPv6 server or be in a man-in-the-middle position.Show less

A vulnerability in the IPv6 DHCP version 6 (DHCPv6) relay and server features of Cisco IOS and IOS XE Software could allow an unauthenticated, remote attacker to trigger a denial of service (DoS) condition. This vulnerability is due to insufficient validation of data boundaries. An attacker could exploit this vulnerability by sending crafted DHCPv6 messages to an affected device. A successful exploit could allow the attacker to cause the device to reload unexpectedly.Show less

A vulnerability in the fragmentation handling code of tunnel protocol packets in Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an affected system to reload, resulting in a denial of service (DoS) condition. This vulnerability is due to the improper handling of large fragmented tunnel protocol packets. One example of a tunnel protocol is Generic Routing Encapsulation (GRE). An attacker could exploit this vulnerability by sending crafted fragmented packets to an affected system. A successful exploit could allow the attacker to cause the affected system to reload, resulting in a DoS condition. Note: Only traffic directed to the affected system can be used to exploit this vulnerability.Show less

A vulnerability in the HTTP-based client profiling feature of Cisco IOS XE Software for Wireless LAN Controllers (WLCs) could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to insufficient input validation of received traffic. An attacker could exploit this vulnerability by sending crafted traffic through a wireless access point. A successful exploit could allow the attacker to cause CPU utilization to increase, which could result in a DoS condition on an affected device and could cause new wireless client associations to fail. Once the offending traffic stops, the affected system will return to an operational state and new client associations will succeed.Show less

A vulnerability in the web UI of Cisco IOS XE Software could allow an authenticated, remote attacker to perform a directory traversal and access resources that are outside the filesystem mountpoint of the web UI. This vulnerability is due to an insufficient security configuration. An attacker could exploit this vulnerability by sending a crafted request to the web UI. A successful exploit could allow the attacker to gain read access to files that are outside the filesystem mountpoint of the web UI. Note: These files are located on a restricted filesystem that is maintained for the web UI. There is no ability to write to any files on this filesystem.Show less