Cisco

A vulnerability in the web-based management interface of Cisco Catalyst SD-WAN Manager, formerly Cisco SD-WAN vManage, could allow an authenticated, remote attacker to inject HTML content. This vulnerability is due to improper validation of user-supplied data in element fields. An attacker could exploit this vulnerability by submitting malicious content within requests and persuading a user to view a page that contains injected content. A successful exploit could allow the attacker to modify pages within the web-based management interface, possibly leading to further browser-based attacks against users of the application.Show less

A vulnerability in the networking component of Cisco access point (AP) software could allow an unauthenticated, remote attacker to cause a temporary disruption of service. This vulnerability is due to overuse of AP resources. An attacker could exploit this vulnerability by connecting to an AP on an affected device as a wireless client and sending a high rate of traffic over an extended period of time. A successful exploit could allow the attacker to cause the Datagram TLS (DTLS) session to tear down and reset, causing a denial of service (DoS) condition.Show less

A vulnerability in the Cisco Group Encrypted Transport VPN (GET VPN) feature of Cisco IOS Software and Cisco IOS XE Software could allow an authenticated, remote attacker who has administrative control of either a group member or a key server to execute arbitrary code on an affected device or cause the device to crash. This vulnerability is due to insufficient validation of attributes in the Group Domain of Interpretation (GDOI) and G-IKEv2 protocols of the GET VPN feature. An attacker could exploit this vulnerability by either compromising an installed key server or modifying the configuration of a group member to point to a key server that is controlled by the attacker. A successful exploit could allow the attacker to execute arbitrary code and gain full control of the affected system or cause the affected system to reload, resulting in a denial of service (DoS) condition. For more information, see the Details ["#details"] section of this advisory.Show less

Vulnerability in the Elasticsearch database used in the of Cisco SD-WAN vManage software could allow an unauthenticated, remote attacker to access the Elasticsearch configuration database of an affected device with the privileges of the elasticsearch user. These vulnerability is due to the presence of a static username and password configured on the vManage. An attacker could exploit this vulnerability by sending a crafted HTTP request to a reachable vManage on port 9200. A successful exploit could allow the attacker to view the Elasticsearch database content. There are workarounds that address this vulnerability.Show less

A vulnerability in Cisco IOS XE Software for Cisco Catalyst 3650 and Catalyst 3850 Series Switches could allow an unauthenticated, remote attacker to cause an affected device to reload unexpectedly, resulting in a denial of service (DoS) condition. This vulnerability is due to improper resource management when processing traffic that is received on the management interface. An attacker could exploit this vulnerability by sending a high rate of traffic to the management interface. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition.Show less

A vulnerability in the Extensible Messaging and Presence Protocol (XMPP) message processing feature of Cisco Jabber could allow an authenticated, remote attacker to manipulate the content of XMPP messages that are used by the affected application. This vulnerability is due to the improper handling of nested XMPP messages within requests that are sent to the Cisco Jabber client software. An attacker could exploit this vulnerability by connecting to an XMPP messaging server and sending crafted XMPP messages to an affected Jabber client. A successful exploit could allow the attacker to manipulate the content of XMPP messages, possibly allowing the attacker to cause the Jabber client application to perform unsafe actions.Show less

A vulnerability in the iPXE boot function of Cisco IOS XR software could allow an authenticated, local attacker to install an unverified software image on an affected device. This vulnerability is due to insufficient image verification. An attacker could exploit this vulnerability by manipulating the boot parameters for image verification during the iPXE boot process on an affected device. A successful exploit could allow the attacker to boot an unverified software image on the affected device.Show less

A vulnerability in the Connectivity Fault Management (CFM) feature of Cisco IOS XR Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to incorrect processing of invalid continuity check messages (CCMs). An attacker could exploit this vulnerability by sending crafted CCMs to an affected device. A successful exploit could allow the attacker to cause the CFM service to crash when a user displays information about maintenance end points (MEPs) for peer MEPs on an affected device.Show less

A vulnerability in the access control list (ACL) processing on MPLS interfaces in the ingress direction of Cisco IOS XR Software could allow an unauthenticated, remote attacker to bypass a configured ACL. This vulnerability is due to incomplete support for this feature. An attacker could exploit this vulnerability by attempting to send traffic through an affected device. A successful exploit could allow the attacker to bypass an ACL on the affected device. There are workarounds that address this vulnerability. This advisory is part of the September 2023 release of the Cisco IOS XR Software Security Advisory Bundled Publication. For a complete list of the advisories and links to them, see Cisco Event Response: September 2023 Semiannual Cisco IOS XR Software Security Advisory Bundled Publication .Show less

A vulnerability in the classic access control list (ACL) compression feature of Cisco IOS XR Software could allow an unauthenticated, remote attacker to bypass the protection that is offered by a configured ACL on an affected device. This vulnerability is due to incorrect destination address range encoding in the compression module of an ACL that is applied to an interface of an affected device. An attacker could exploit this vulnerability by sending traffic through the affected device that should be denied by the configured ACL. A successful exploit could allow the attacker to bypass configured ACL protections on the affected device, allowing the attacker to access trusted networks that the device might be protecting. There are workarounds that address this vulnerability. This advisory is part of the September 2023 release of the Cisco IOS XR Software Security Advisory Bundled Publication. For a complete list of the advisories and links to them, see Cisco Event Response: September 2023 Semiannual Cisco IOS XR Software Security Advisory Bundled Publication .Show less

A vulnerability in Cisco IOS XR Software image verification checks could allow an authenticated, local attacker to execute arbitrary code on the underlying operating system. This vulnerability is due to a time-of-check, time-of-use (TOCTOU) race condition when an install query regarding an ISO image is performed during an install operation that uses an ISO image. An attacker could exploit this vulnerability by modifying an ISO image and then carrying out install requests in parallel. A successful exploit could allow the attacker to execute arbitrary code on an affected device.Show less

A vulnerability in the ERS API of Cisco ISE could allow an authenticated, remote attacker to read arbitrary files on the underlying operating system of an affected device. To exploit this vulnerability, an attacker must have valid Administrator-level privileges on the affected device. This vulnerability is due to improper privilege management in the ERS API. An attacker could exploit this vulnerability by sending a crafted request to an affected device. A successful exploit could allow the attacker to elevate their privileges beyond the sphere of their intended access level, which would allow them to obtain sensitive information from the underlying operating system. Note: The ERS is not enabled by default. To verify the status of the ERS API in the Admin GUI, choose Administration > Settings > API Settings > API Service Settings.Show less

A vulnerability in the Embedded Service Router (ESR) of Cisco ISE could allow an authenticated, local attacker to read, write, or delete arbitrary files on the underlying operating system and escalate their privileges to root. To exploit this vulnerability, an attacker must have valid Administrator-level privileges on the affected device. This vulnerability is due to improper privilege management in the ESR console. An attacker could exploit this vulnerability by sending a crafted request to an affected device. A successful exploit could allow the attacker to elevate their privileges to root and read, write, or delete arbitrary files from the underlying operating system of the affected device. Note: The ESR is not enabled by default and must be licensed. To verify the status of the ESR in the Admin GUI, choose Administration > Settings > Protocols > IPSec.Show less

A vulnerability in the remote access VPN feature of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to conduct a brute force attack in an attempt to identify valid username and password combinations or an authenticated, remote attacker to establish a clientless SSL VPN session with an unauthorized user. This vulnerability is due to improper separation of authentication, authorization, and accounting (AAA) between the remote access VPN feature and the HTTPS management and site-to-site VPN features. An attacker could exploit this vulnerability by specifying a default connection profile/tunnel group while conducting a brute force attack or while establishing a clientless SSL VPN session using valid credentials. A successful exploit could allow the attacker to achieve one or both of the following: Identify valid credentials that could then be used to establish an unauthorized remote access VPN session. Establish a clientless SSL VPN session (only when running Cisco ASA Software Release 9.16 or earlier). Notes: Establishing a client-based remote access VPN tunnel is not possible as these default connection profiles/tunnel groups do not and cannot have an IP address pool configured. This vulnerability does not allow an attacker to bypass authentication. To successfully establish a remote access VPN session, valid credentials are required, including a valid second factor if multi-factor authentication (MFA) is configured. Cisco will release software updates that address this vulnerability. There are workarounds that address this vulnerability.Show less

A vulnerability in the web-based management interface of Cisco HyperFlex HX Data Platform could allow an unauthenticated, remote attacker to redirect a user to a malicious web page. This vulnerability is due to improper input validation of the parameters in an HTTP request. An attacker could exploit this vulnerability by persuading a user to click a crafted link. A successful exploit could allow the attacker to redirect a user to a malicious website.Show less

A vulnerability in the RADIUS message processing feature of Cisco Identity Services Engine (ISE) could allow an unauthenticated, remote attacker to cause the affected system to stop processing RADIUS packets. This vulnerability is due to improper handling of certain RADIUS accounting requests. An attacker could exploit this vulnerability by sending a crafted authentication request to a network access device (NAD) that uses Cisco ISE for authentication, authorization, and accounting (AAA). This would eventually result in the NAD sending a RADIUS accounting request packet to Cisco ISE. An attacker could also exploit this vulnerability by sending a crafted RADIUS accounting request packet to Cisco ISE directly if the RADIUS shared secret is known. A successful exploit could allow the attacker to cause the RADIUS process to unexpectedly restart, resulting in authentication or authorization timeouts and denying legitimate users access to the network or service. Clients already authenticated to the network would not be affected. Note: To recover the ability to process RADIUS packets, a manual restart of the affected Policy Service Node (PSN) may be required. For more information, see the Details ["#details"] section of this advisory.Show less

A vulnerability in the single sign-on (SSO) implementation of Cisco BroadWorks Application Delivery Platform and Cisco BroadWorks Xtended Services Platform could allow an unauthenticated, remote attacker to forge the credentials required to access an affected system. This vulnerability is due to the method used to validate SSO tokens. An attacker could exploit this vulnerability by authenticating to the application with forged credentials. A successful exploit could allow the attacker to commit toll fraud or to execute commands at the privilege level of the forged account. If that account is an Administrator account, the attacker would have the ability to view confidential information, modify customer settings, or modify settings for other users. To exploit this vulnerability, the attacker would need a valid user ID that is associated with an affected Cisco BroadWorks system.Show less

A vulnerability in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code on an affected device. This vulnerability is due to improper validation of requests that are sent to the web-based management interface. An attacker could exploit this vulnerability by sending a crafted request to the web-based management interface. A successful exploit could allow the attacker to execute arbitrary code with root privileges on an affected device. To exploit this vulnerability, the attacker must have valid Administrator credentials on the affected device.Show less

A vulnerability in Cisco Emergency Responder, Cisco Unified Communications Manager (Unified CM), Cisco Unified Communications Manager Session Management Edition (Unified CM SME), and Cisco Unity Connection could allow an authenticated, remote attacker to elevate privileges to root on an affected device. This vulnerability exists because the application does not properly restrict the files that are being used for upgrades. An attacker could exploit this vulnerability by providing a crafted upgrade file. A successful exploit could allow the attacker to elevate privileges to root. To exploit this vulnerability, the attacker must have valid platform administrator credentials on an affected device.Show less

A vulnerability in the CLI of Cisco FXOS Software could allow an authenticated, local attacker to create a file or overwrite any file on the filesystem of an affected device, including system files. The vulnerability occurs because there is no validation of parameters when a specific CLI command is used. An attacker could exploit this vulnerability by authenticating to an affected device and using the command at the CLI. A successful exploit could allow the attacker to overwrite any file on the disk of the affected device, including system files. The attacker must have valid administrative credentials on the affected device to exploit this vulnerability.Show less