Cisco

A vulnerability in the Access Network Query Protocol (ANQP) ingress frame processing functionality of Cisco Wireless LAN Controllers could allow an unauthenticated, Layer 2 RF-adjacent attacker to cause an affected device to restart unexpectedly, resulting in a denial of service (DoS) condition. The vulnerability is due to incomplete input validation of ANQP query frames by the affected device. An attacker could exploit this vulnerability by sending a malformed ANQP query frame to an affected device that is on an RF-adjacent network. A successful exploit could allow the attacker to cause the affected device to restart unexpectedly, resulting in a DoS condition. This vulnerability affects Cisco Wireless LAN Controllers that are running a vulnerable release of Cisco WLC Software and are configured to support Hotspot 2.0. Cisco Bug IDs: CSCve05779.Show less

A vulnerability in the implementation of Protected Extensible Authentication Protocol (PEAP) functionality for standalone configurations of Cisco Aironet 1800, 2800, and 3800 Series Access Points could allow an unauthenticated, adjacent attacker to bypass authentication and connect to an affected device. The vulnerability exists because the affected device uses an incorrect default configuration setting of fail open when running in standalone mode. An attacker could exploit this vulnerability by attempting to connect to an affected device. A successful exploit could allow the attacker to bypass authentication and connect to the affected device. This vulnerability affects Cisco Aironet 1800, 2800, and 3800 Series Access Points that are running a vulnerable software release and use WLAN configuration settings that include FlexConnect local switching and central authentication with MAC filtering. Cisco Bug IDs: CSCvd46314.Show less

A vulnerability in the Control and Provisioning of Wireless Access Points (CAPWAP) Discovery Request parsing functionality of Cisco Wireless LAN Controllers could allow an unauthenticated, remote attacker to cause an affected device to restart unexpectedly, resulting in a denial of service (DoS) condition. The vulnerability is due to incomplete input validation of fields in CAPWAP Discovery Request packets by the affected device. An attacker could exploit this vulnerability by sending crafted CAPWAP Discovery Request packets to an affected device. A successful exploit could allow the attacker to cause the affected device to restart unexpectedly, resulting in a DoS condition. Cisco Bug IDs: CSCvb95842.Show less

A vulnerability in the packet processing code of Cisco IOS Software for Cisco Aironet Access Points could allow an unauthenticated, adjacent attacker to retrieve content from memory on an affected device, which could lead to the disclosure of confidential information. The vulnerability is due to insufficient condition checks that are performed by the affected device when the device adds padding to egress packets. An attacker could exploit this vulnerability by sending a crafted IP packet to an affected device. A successful exploit could allow the attacker to retrieve content from memory on the affected device, which could lead to the disclosure of confidential information. Cisco Bug IDs: CSCvc21581.Show less

A vulnerability in the Simple Network Management Protocol (SNMP) subsystem of Cisco Wireless LAN Controllers could allow an authenticated, remote attacker to cause an affected device to restart, resulting in a denial of service (DoS) condition. The vulnerability is due to a memory leak that occurs on an affected device after the device fails to deallocate a buffer that is used when certain MIBs are polled. An attacker who knows the SNMP Version 2 SNMP Read string or has valid SNMP Version 3 credentials for an affected device could repeatedly poll the affected MIB object IDs (OIDs) and consume available memory on the device. When memory is sufficiently depleted on the device, the device will restart, resulting in a DoS condition. Cisco Bug IDs: CSCvc71674.Show less

A vulnerability in the Smart Licensing Manager service of the Cisco Firepower 4100 Series Next-Generation Firewall (NGFW) and Firepower 9300 Security Appliance could allow an authenticated, remote attacker to inject arbitrary commands that could be executed with root privileges. The vulnerability is due to insufficient input validation of certain Smart Licensing configuration parameters. An authenticated attacker could exploit the vulnerability by configuring a malicious URL within the affected feature. A successful exploit could allow the attacker to execute arbitrary commands with root privileges. This vulnerability affects the following Cisco Firepower Security products running FX-OS code trains 1.1.3, 1.1.4, and 2.0.1 (versions 2.1.1, 2.2.1, and 2.2.2 are not affected): Firepower 4100 Series Next-Generation Firewall and Firepower 9300 Security Appliance. Cisco Bug IDs: CSCvb86863.Show less

A vulnerability in the web framework code for the SQL database interface of the Cisco Prime Collaboration Provisioning application could allow an authenticated, remote attacker to impact the confidentiality and integrity of the application by executing arbitrary SQL queries, aka SQL Injection. The attacker could read or write information from the SQL database. The vulnerability is due to a lack of proper validation on user-supplied input within SQL queries. An attacker could exploit this vulnerability by sending crafted URLs that contain malicious SQL statements to the affected application. An exploit could allow the attacker to determine the presence of certain values and write malicious input in the SQL database. The attacker would need to have valid user credentials. This vulnerability affects Cisco Prime Collaboration Provisioning Software Releases prior to 12.3. Cisco Bug IDs: CSCvf47935.Show less

A vulnerability in the implementation of 802.11v Basic Service Set (BSS) Transition Management functionality in Cisco Wireless LAN Controllers could allow an unauthenticated, adjacent attacker to cause an affected device to reload unexpectedly, resulting in a denial of service (DoS) condition. The vulnerability is due to insufficient input validation of 802.11v BSS Transition Management Response packets that an affected device receives from wireless clients. An attacker could exploit this vulnerability by sending a malformed 802.11v BSS Transition Management Response packet to an affected device. A successful exploit could allow the attacker to cause the affected device to reload unexpectedly, resulting in a DoS condition. Cisco Bug IDs: CSCvb57803.Show less

A vulnerability in Extensible Authentication Protocol (EAP) ingress frame processing for the Cisco Aironet 1560, 2800, and 3800 Series Access Points could allow an unauthenticated, Layer 2 radio frequency (RF) adjacent attacker to cause the Access Point (AP) to reload, resulting in a denial of service (DoS) condition. The vulnerability is due to insufficient validation of the EAP frame. An attacker could exploit this vulnerability by sending a malformed EAP frame to the targeted device. A successful exploit could allow the attacker to cause the AP to reload, resulting in a DoS condition while the AP is reloading. It may be necessary to manually power cycle the device in order for it to recover. This vulnerability affects the following Cisco products running either the Lightweight AP Software or Mobility Express image: Aironet 1560 Series Access Points, Aironet 2800 Series Access Points, Aironet 3800 Series Access Points. Note: The Cisco Aironet 1560 Series Access Point device is supported as of release 8.3.112.0. Cisco Bug IDs: CSCve18935.Show less

A vulnerability in 802.11 association request frame processing for the Cisco Aironet 1560, 2800, and 3800 Series Access Points could allow an unauthenticated, Layer 2 radio frequency (RF) adjacent attacker to cause the Access Point (AP) to reload, resulting in a denial of service (DoS) condition. The vulnerability is due to insufficient frame validation of the 802.11 association request. An attacker could exploit this vulnerability by sending a malformed 802.11 association request to the targeted device. An exploit could allow the attacker to cause the AP to reload, resulting in a DoS condition while the AP is reloading. This vulnerability affects the following Cisco products running either the Lightweight AP Software or Mobility Express image: Aironet 1560 Series Access Points, Aironet 2800 Series Access Points, Aironet 3800 Series Access Points. Note: The Cisco Aironet 1560 Series Access Point device is supported as of release 8.3.112.0. Cisco Bug IDs: CSCve12189.Show less

A vulnerability within the firewall configuration of the Cisco Application Policy Infrastructure Controller Enterprise Module (APIC-EM) could allow an unauthenticated, adjacent attacker to gain privileged access to services only available on the internal network of the device. The vulnerability is due to an incorrect firewall rule on the device. The misconfiguration could allow traffic sent to the public interface of the device to be forwarded to the internal virtual network of the APIC-EM. An attacker that is logically adjacent to the network on which the public interface of the affected APIC-EM resides could leverage this behavior to gain access to services listening on the internal network with elevated privileges. This vulnerability affects appliances or virtual devices running Cisco Application Policy Infrastructure Controller Enterprise Module prior to version 1.5. Cisco Bug IDs: CSCve89638.Show less

A vulnerability in the restricted shell of the Cisco Identity Services Engine (ISE) that is accessible via SSH could allow an authenticated, local attacker to run arbitrary CLI commands with elevated privileges. The vulnerability is due to incomplete input validation of the user input for CLI commands issued at the restricted shell. An attacker could exploit this vulnerability by authenticating to the targeted device and executing commands that could lead to elevated privileges. An attacker would need valid user credentials to the device to exploit this vulnerability. The vulnerability affects the following Cisco Identity Services Engine (ISE) products running Release 1.4, 2.0, 2.0.1, 2.1.0: ISE, ISE Express, ISE Virtual Appliance. Cisco Bug IDs: CSCve74916.Show less

A vulnerability in the Cisco Unified Computing System (UCS) Manager, Cisco Firepower 4100 Series Next-Generation Firewall (NGFW), and Cisco Firepower 9300 Security Appliance could allow an authenticated, local attacker to obtain root shell privileges on the device, aka Command Injection. The vulnerability is due to improper validation of string input in the shell application. An attacker could exploit this vulnerability through the use of malicious commands. A successful exploit could allow the attacker to obtain root shell privileges on the device. Cisco Bug IDs: CSCvf20741, CSCvf60078.Show less

Cisco WebEx Meetings Server before 1.1 uses meeting IDs with insufficient entropy, which makes it easier for remote attackers to bypass authentication and join arbitrary meetings without a password, aka Bug ID CSCuc79643.Show less

The Cisco AMP For Endpoints application allows an authenticated, local attacker to access a static key value stored in the local application software. The vulnerability is due to the use of a static key value stored in the application used to encrypt the connector protection password. An attacker could exploit this vulnerability by gaining local, administrative access to a Windows host and stopping the Cisco AMP for Endpoints service. Cisco Bug IDs: CSCvg42904.Show less

A vulnerability in the authentication, authorization, and accounting (AAA) implementation of Cisco Firepower Extensible Operating System (FXOS) and NX-OS System Software could allow an unauthenticated, remote attacker to cause an affected device to reload. The vulnerability occurs because AAA processes prevent the NX-OS System Manager from receiving keepalive messages when an affected device receives a high rate of login attempts, such as in a brute-force login attack. System memory can run low on the FXOS devices under the same conditions, which could cause the AAA process to unexpectedly restart or cause the device to reload. An attacker could exploit this vulnerability by performing a brute-force login attack against a device that is configured with AAA security services. A successful exploit could allow the attacker to cause the affected device to reload. This vulnerability affects the following Cisco products if they are running Cisco FXOS or NX-OS System Software that is configured for AAA services: Firepower 4100 Series Next-Generation Firewall, Firepower 9300 Security Appliance, Multilayer Director Switches, Nexus 1000V Series Switches, Nexus 1100 Series Cloud Services Platforms, Nexus 2000 Series Switches, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 5000 Series Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules, Unified Computing System (UCS) 6100 Series Fabric Interconnects, UCS 6200 Series Fabric Interconnects, UCS 6300 Series Fabric Interconnects. Cisco Bug IDs: CSCuq58760, CSCuq71257, CSCur97432, CSCus05214, CSCux54898, CSCvc33141, CSCvd36971, CSCve03660.Show less

A vulnerability in the Python scripting subsystem of Cisco NX-OS Software could allow an authenticated, local attacker to escape the Python parser and gain unauthorized access to the underlying operating system of the device. The vulnerability exists due to insufficient sanitization of user-supplied parameters that are passed to certain Python functions within the scripting sandbox of the affected device. An attacker could exploit this vulnerability to escape the scripting sandbox and execute arbitrary commands on the underlying operating system with the privileges of the authenticated user. To exploit this vulnerability, an attacker must have local access and be authenticated to the targeted device with administrative or Python execution privileges. These requirements could limit the possibility of a successful exploit. This vulnerability affects the following Cisco products if they are running Cisco NX-OS Software: Multilayer Director Switches, Nexus 2000 Series Fabric Extenders, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 5000 Series Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches - Standalone, NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules. Cisco Bug IDs: CSCvb86832, CSCvd86474, CSCvd86479, CSCvd86484, CSCvd86490, CSCve97102, CSCvf12757, CSCvf12804, CSCvf12815, CSCvf15198.Show less

A vulnerability in Cisco WebEx Meeting Center could allow an unauthenticated, remote attacker to conduct a cross-site scripting (XSS) attack against a user of an affected system. The vulnerability is due to insufficient input validation of some parameters that are passed to the web server of the affected system. An attacker could exploit this vulnerability by convincing a user to follow a malicious link or by intercepting a user request and injecting malicious code into the request. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected web interface or allow the attacker to access sensitive browser-based information. Cisco Bug IDs: CSCvf78615, CSCvf78628.Show less

A vulnerability in Cisco WebEx Meetings Server could allow an unauthenticated, remote attacker to conduct a cross-site scripting (XSS) attack against a user of the affected system. The vulnerability is due to insufficient input validation of some parameters that are passed to the web server of the affected system. An attacker could exploit this vulnerability by convincing a user to follow a malicious link or by intercepting a user request and injecting malicious code into the request. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected web interface or allow the attacker to access sensitive browser-based information. Cisco Bug IDs: CSCvf51241, CSCvf51261.Show less