Cisco

A vulnerability in Cisco IOS XE Software could allow an authenticated, local attacker to execute persistent code at boot time and break the chain of trust. This vulnerability is due to incorrect validations by boot scripts when specific ROM monitor (ROMMON) variables are set. An attacker could exploit this vulnerability by installing code to a specific directory in the underlying operating system (OS) and setting a specific ROMMON variable. A successful exploit could allow the attacker to execute persistent code on the underlying OS. To exploit this vulnerability, the attacker would need access to the root shell on the device or have physical access to the device.Show less

Multiple vulnerabilities in the initialization routines that are executed during bootup of Cisco IOS XE Software for Cisco ASR 900 Series Aggregation Services Routers with a Route Switch Processor 3 (RSP3) installed could allow an authenticated, local attacker with high privileges to execute persistent code at bootup and break the chain of trust. These vulnerabilities are due to incorrect validations by boot scripts when specific ROM monitor (ROMMON) variables are set. An attacker could exploit these vulnerabilities by copying a specific file to the local file system of an affected device and defining specific ROMMON variables. A successful exploit could allow the attacker to run arbitrary code on the underlying operating system (OS) with root privileges. To exploit these vulnerabilities, an attacker would need to have access to the root shell on the device or have physical access to the device.Show less

A vulnerability in the packet processing of Cisco IOS XE Software for Cisco 4461 Integrated Services Routers could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. The vulnerability is due to incorrect processing of IPv4 or IPv6 traffic to or through an affected device. An attacker could exploit this vulnerability by sending IP traffic to or through an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition.Show less

A vulnerability in the PROFINET feature of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, adjacent attacker to cause an affected device to crash and reload, resulting in a denial of service (DoS) condition on the device. The vulnerability is due to insufficient processing logic for crafted PROFINET packets that are sent to an affected device. An attacker could exploit this vulnerability by sending crafted PROFINET packets to an affected device for processing. A successful exploit could allow the attacker to cause the device to crash and reload, resulting in a DoS condition on the device.Show less

A vulnerability in the Split DNS feature of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. The vulnerability occurs because the regular expression (regex) engine that is used with the Split DNS feature of affected releases may time out when it processes the DNS name list configuration. An attacker could exploit this vulnerability by trying to resolve an address or hostname that the affected device handles. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition.Show less

A vulnerability in the RESTCONF and NETCONF-YANG access control list (ACL) function of Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause the device to reload. The vulnerability is due to incorrect processing of the ACL that is tied to the RESTCONF or NETCONF-YANG feature. An attacker could exploit this vulnerability by accessing the device using RESTCONF or NETCONF-YANG. A successful exploit could allow an attacker to cause the device to reload, resulting in a denial of service (DoS) condition.Show less

A vulnerability in the persistent Telnet/Secure Shell (SSH) CLI of Cisco IOS XE Software could allow an authenticated, local attacker to gain shell access on an affected device and execute commands on the underlying operating system (OS) with root privileges. The vulnerability is due to insufficient enforcement of the consent token in authorizing shell access. An attacker could exploit this vulnerability by authenticating to the persistent Telnet/SSH CLI on an affected device and requesting shell access. A successful exploit could allow the attacker to gain shell access on the affected device and execute commands on the underlying OS with root privileges.Show less

A vulnerability in the CLI of Cisco IOS XE Software could allow an authenticated, local attacker to inject a command to the underlying operating system that will execute with root privileges upon the next reboot of the device. The authenticated user must have privileged EXEC permissions on the device. The vulnerability is due to insufficient protection of values passed to a script that executes during device startup. An attacker could exploit this vulnerability by writing values to a specific file. A successful exploit could allow the attacker to execute commands with root privileges each time the affected device is restarted.Show less

A vulnerability in the web UI feature of Cisco IOS XE Software could allow an authenticated, remote attacker to utilize parts of the web UI for which they are not authorized.The vulnerability is due to insufficient authorization of web UI access requests. An attacker could exploit this vulnerability by sending a crafted HTTP request to the web UI. A successful exploit could allow the attacker to utilize parts of the web UI for which they are not authorized. This could allow a Read-Only user to perform actions of an Admin user.Show less

A vulnerability in the Control and Provisioning of Wireless Access Points (CAPWAP) protocol processing of Cisco IOS XE Software for Cisco Catalyst 9800 Series Wireless Controllers could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition of an affected device. The vulnerability is due to insufficient input validation during CAPWAP packet processing. An attacker could exploit this vulnerability by sending a crafted CAPWAP packet to an affected device, resulting in a buffer over-read. A successful exploit could allow the attacker to cause the affected device to crash and reload, resulting in a DoS condition on the affected device.Show less

A vulnerability in the file system on the pluggable USB 3.0 Solid State Drive (SSD) for Cisco IOS XE Software could allow an authenticated, physical attacker to remove the USB 3.0 SSD and modify sensitive areas of the file system, including the namespace container protections. The vulnerability occurs because the USB 3.0 SSD control data is not stored on the internal boot flash. An attacker could exploit this vulnerability by removing the USB 3.0 SSD, modifying or deleting files on the USB 3.0 SSD by using another device, and then reinserting the USB 3.0 SSD on the original device. A successful exploit could allow the attacker to remove container protections and perform file actions outside the namespace of the container with root privileges.Show less

A vulnerability in the application-hosting subsystem of Cisco IOS XE Software could allow an authenticated, local attacker to elevate privileges to root on an affected device. The attacker could execute IOS XE commands outside the application-hosting subsystem Docker container as well as on the underlying Linux operating system. These commands could be run as the root user. The vulnerability is due to a combination of two factors: (a) incomplete input validation of the user payload of CLI commands, and (b) improper role-based access control (RBAC) when commands are issued at the command line within the application-hosting subsystem. An attacker could exploit this vulnerability by using a CLI command with crafted user input. A successful exploit could allow the lower-privileged attacker to execute arbitrary CLI commands with root privileges. The attacker would need valid user credentials to exploit this vulnerability.Show less

A vulnerability in Simple Network Management Protocol (SNMP) trap generation for wireless clients of the Cisco IOS XE Wireless Controller Software for the Cisco Catalyst 9000 Family could allow an unauthenticated, adjacent attacker to cause the device to unexpectedly reload, causing a denial of service (DoS) condition on an affected device. The vulnerability is due to the lack of input validation of the information used to generate an SNMP trap in relation to a wireless client connection. An attacker could exploit this vulnerability by sending an 802.1x packet with crafted parameters during the wireless authentication setup phase of a connection. A successful exploit could allow the attacker to cause the device to reload, causing a DoS condition.Show less

A vulnerability in the multicast DNS (mDNS) feature of Cisco IOS XE Software for Cisco Catalyst 9800 Series Wireless Controllers could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to improper validation of mDNS packets. An attacker could exploit this vulnerability by sending a crafted mDNS packet to an affected device. A successful exploit could cause a device to reload, resulting in a DoS condition.Show less

Multiple vulnerabilities in the web management framework of Cisco IOS XE Software could allow an authenticated, remote attacker with read-only privileges to elevate privileges to the level of an Administrator user on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.Show less

Multiple vulnerabilities in the Distance Vector Multicast Routing Protocol (DVMRP) feature of Cisco IOS XR Software could allow an unauthenticated, remote attacker to either immediately crash the Internet Group Management Protocol (IGMP) process or make it consume available memory and eventually crash. The memory consumption may negatively impact other processes that are running on the device. These vulnerabilities are due to the incorrect handling of IGMP packets. An attacker could exploit these vulnerabilities by sending crafted IGMP traffic to an affected device. A successful exploit could allow the attacker to immediately crash the IGMP process or cause memory exhaustion, resulting in other processes becoming unstable. These processes may include, but are not limited to, interior and exterior routing protocols. Cisco will release software updates that address these vulnerabilities.Show less

A vulnerability in the video endpoint API (xAPI) of Cisco TelePresence Collaboration Endpoint (CE) Software, Cisco TelePresence Codec (TC) Software, and Cisco RoomOS Software could allow an authenticated, remote attacker to conduct directory traversal attacks on an affected device. The vulnerability is due to insufficient validation of user-supplied input to the xAPI of the affected software. An attacker could exploit this vulnerability by sending a crafted request to the xAPI. A successful exploit could allow the attacker to read and write arbitrary files in the system. To exploit this vulnerability, an attacker would need either an In-Room Control or administrator account.Show less

A vulnerability in the web-based management interface of Cisco Email Security Appliance (ESA) could allow an unauthenticated, remote attacker to conduct a cross-site scripting (XSS) attack against a user of the web-based management interface of an affected device. The vulnerability exists because the web-based management interface of the affected device does not properly validate user-supplied input. An attacker could exploit this vulnerability by persuading a user to click a malicious link. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or to access sensitive, browser-based information.Show less

A vulnerability in the web-based management interface of Cisco Unified Communications Manager (UCM) could allow an unauthenticated, remote attacker to conduct a cross-site request forgery (CSRF) attack on an affected device. The vulnerability is due to insufficient CSRF protections for the web-based management interface on an affected device. An attacker could exploit this vulnerability by persuading a user of the interface to follow a malicious link. A successful exploit could allow the attacker to perform arbitrary actions with the privilege level of the targeted user.Show less

A vulnerability in the email message scanning of Cisco AsyncOS Software for Cisco Email Security Appliance (ESA) could allow an unauthenticated, remote attacker to bypass configured filters on the device. The vulnerability is due to improper validation of incoming emails. An attacker could exploit this vulnerability by sending a crafted email message to a recipient protected by the ESA. A successful exploit could allow the attacker to bypass the configured content filters, which could allow malicious content to pass through the device.Show less