W1.fi

In hostapd before 2.12, a missing bounds check in AP-mode Wi-Fi 7 (IEEE 802.11be) Multi-Link Operation (MLO) association request processing allows an unauthenticated attacker within wireless range to send a crafted management frame containing a malformed Multi-Link Element or Per-STA Profile subelement. In hostapd_process_ml_assoc_req() in src/ap/ieee802_11_eht.c, the received link_id field can be parsed as value 15, but the corresponding links[] storage only has valid entries for lower link IDs (0 through 14). This causes an out-of-bounds write / small memory corruption during association processing before the 4-way handshake. The attack does not require network credentials, prior authentication, or user interaction. The confirmed practical impact is denial of service through hostapd process termination. This affects hostapd v2.11 and newer development snapshots before v2.12 when built with CONFIG_IEEE80211BE enabled. The issue is fixed in hostapd v2.12 and the upstream 2026-1 fixes.Show less

hostapd fails to process crafted RADIUS packets properly. When hostapd authenticates wi-fi devices with RADIUS authentication, an attacker in the position between the hostapd and the RADIUS server may inject crafted RADIUS packets and force RADIUS authentications to fail.Show less

In hostapd 2.10 and earlier, the PKEX code remains active even after a successful PKEX association. An attacker that successfully bootstrapped public keys with another entity using PKEX in the past, will be able to subvert a future bootstrapping by passively observing public keys, re-using the encrypting element Qi and subtracting it from the captured message M (X = M - Qi). This will result in the public ephemeral key X; the only element required to subvert the PKEX association.Show less

An issue was discovered in Ubuntu wpa_supplicant that resulted in loading of arbitrary shared objects, which allows a local unprivileged attacker to escalate privileges to the user that wpa_supplicant runs as (usually root). Membership in the netdev group or access to the dbus interface of wpa_supplicant allow an unprivileged user to specify an arbitrary path to a module to be loaded by the wpa_supplicant process; other escalation paths might exist.Show less

The implementation of PEAP in wpa_supplicant through 2.10 allows authentication bypass. For a successful attack, wpa_supplicant must be configured to not verify the network's TLS certificate during Phase 1 authentication, and an eap_peap_decrypt vulnerability can then be abused to skip Phase 2 authentication. The attack vector is sending an EAP-TLV Success packet instead of starting Phase 2. This allows an adversary to impersonate Enterprise Wi-Fi networks.Show less

The implementations of EAP-pwd in hostapd before 2.10 and wpa_supplicant before 2.10 are vulnerable to side-channel attacks as a result of cache access patterns. NOTE: this issue exists because of an incomplete fix for CVE-2019-9495.Show less

The implementations of SAE in hostapd before 2.10 and wpa_supplicant before 2.10 are vulnerable to side channel attacks as a result of cache access patterns. NOTE: this issue exists because of an incomplete fix for CVE-2019-9494.Show less

A vulnerability was discovered in how p2p/p2p_pd.c in wpa_supplicant before 2.10 processes P2P (Wi-Fi Direct) provision discovery requests. It could result in denial of service or other impact (potentially execution of arbitrary code), for an attacker within radio range.Show less

The Open Connectivity Foundation UPnP specification before 2020-04-17 does not forbid the acceptance of a subscription request with a delivery URL on a different network segment than the fully qualified event-subscription URL, aka the CallStranger issue.Show less

hostapd before 2.6, in EAP mode, makes calls to the rand() and random() standard library functions without any preceding srand() or srandom() call, which results in inappropriate use of deterministic values. This was fixed in conjunction with CVE-2016-10743.Show less

An exploitable denial-of-service vulnerability exists in the 802.11w security state handling for hostapd 2.6 connected clients with valid 802.11w sessions. By simulating an incomplete new association, an attacker can trigger a deauthentication against stations using 802.11w, resulting in a denial of service.Show less

An exploitable denial-of-service vulnerability exists in the hostapd 2.6, where an attacker could trigger AP to send IAPP location updates for stations, before the required authentication process has completed. This could lead to different denial of service scenarios, either by causing CAM table attacks, or by leading to traffic flapping if faking already existing clients in other nearby Aps of the same wireless infrastructure. An attacker can forge Authentication and Association Request packets to trigger this vulnerability.Show less

hostapd before 2.10 and wpa_supplicant before 2.10 allow an incorrect indication of disconnection in certain situations because source address validation is mishandled. This is a denial of service that should have been prevented by PMF (aka management frame protection). The attacker must send a crafted 802.11 frame from a location that is within the 802.11 communications range.Show less

The implementations of SAE and EAP-pwd in hostapd and wpa_supplicant 2.x through 2.8 are vulnerable to side-channel attacks as a result of observable timing differences and cache access patterns when Brainpool curves are used. An attacker may be able to gain leaked information from a side-channel attack that can be used for full password recovery.Show less

The EAP-pwd implementation in hostapd (EAP server) before 2.8 and wpa_supplicant (EAP peer) before 2.8 does not validate fragmentation reassembly state properly for a case where an unexpected fragment could be received. This could result in process termination due to a NULL pointer dereference (denial of service). This affects eap_server/eap_server_pwd.c and eap_peer/eap_pwd.c.Show less

The implementations of EAP-PWD in wpa_supplicant EAP Peer, when built against a crypto library missing explicit validation on imported elements, do not validate the scalar and element values in EAP-pwd-Commit. An attacker may complete authentication, session key and control of the data connection with a client. Both hostapd with SAE support and wpa_supplicant with SAE support prior to and including version 2.4 are affected. Both hostapd with EAP-pwd support and wpa_supplicant with EAP-pwd support prior to and including version 2.7 are affected.Show less

The implementations of EAP-PWD in hostapd EAP Server, when built against a crypto library missing explicit validation on imported elements, do not validate the scalar and element values in EAP-pwd-Commit. An attacker may be able to use invalid scalar/element values to complete authentication, gaining session key and network access without needing or learning the password. Both hostapd with SAE support and wpa_supplicant with SAE support prior to and including version 2.4 are affected. Both hostapd with EAP-pwd support and wpa_supplicant with EAP-pwd support prior to and including version 2.7 are affected.Show less

The implementations of EAP-PWD in hostapd EAP Server and wpa_supplicant EAP Peer do not validate the scalar and element values in EAP-pwd-Commit. This vulnerability may allow an attacker to complete EAP-PWD authentication without knowing the password. However, unless the crypto library does not implement additional checks for the EC point, the attacker will not be able to derive the session key or complete the key exchange. Both hostapd with SAE support and wpa_supplicant with SAE support prior to and including version 2.4 are affected. Both hostapd with EAP-pwd support and wpa_supplicant with EAP-pwd support prior to and including version 2.7 are affected.Show less

An invalid authentication sequence could result in the hostapd process terminating due to missing state validation steps when processing the SAE confirm message when in hostapd/AP mode. All version of hostapd with SAE support are vulnerable. An attacker may force the hostapd process to terminate, performing a denial of service attack. Both hostapd with SAE support and wpa_supplicant with SAE support prior to and including version 2.7 are affected.Show less