Splunk

In Splunk Enterprise versions in the following table, an authenticated user can craft a dashboard that could potentially leak information (for example, username, email, and real name) about Splunk users, when visited by another user through the drilldown component. The vulnerability requires user access to create and share dashboards using Splunk Web.Show less

When using Ingest Actions to configure a destination that resides on Amazon Simple Storage Service (S3) in Splunk Web, TLS certificate validation is not correctly performed and tested for the destination. The vulnerability only affects connections between Splunk Enterprise and an Ingest Actions Destination through Splunk Web and only applies to environments that have configured TLS certificate validation. It does not apply to Destinations configured directly in the outputs.conf configuration file. The vulnerability affects Splunk Enterprise version 9.0.0 and does not affect versions below 9.0.0, including the 8.1.x and 8.2.x versions.Show less

When curl < 7.84.0 does FTP transfers secured by krb5, it handles message verification failures wrongly. This flaw makes it possible for a Man-In-The-Middle attack to go unnoticed and even allows it to inject data to the client.Show less

When curl < 7.84.0 saves cookies, alt-svc and hsts data to local files, it makes the operation atomic by finalizing the operation with a rename from a temporary name to the final target file name.In that rename operation, it might accidentally *widen* the permissions for the target file, leaving the updated file accessible to more users than intended.Show less

curl < 7.84.0 supports "chained" HTTP compression algorithms, meaning that a serverresponse can be compressed multiple times and potentially with different algorithms. The number of acceptable "links" in this "decompression chain" was unbounded, allowing a malicious server to insert a virtually unlimited number of compression steps.The use of such a decompression chain could result in a "malloc bomb", makingcurl end up spending enormous amounts of allocated heap memory, or trying toand returning out of memory errors.Show less

A malicious server can serve excessive amounts of `Set-Cookie:` headers in a HTTP response to curl and curl < 7.84.0 stores all of them. A sufficiently large amount of (big) cookies make subsequent HTTP requests to this, or other servers to which the cookies match, create requests that become larger than the threshold that curl uses internally to avoid sending crazy large requests (1048576 bytes) and instead returns an error.This denial state might remain for as long as the same cookies are kept, match and haven't expired. Due to cookie matching rules, a server on `foo.example.com` can set cookies that also would match for `bar.example.com`, making it it possible for a "sister server" to effectively cause a denial of service for a sibling site on the same second level domain using this method.Show less

Splunk Enterprise deployment servers in versions before 8.1.10.1, 8.2.6.1, and 9.0 let clients deploy forwarder bundles to other deployment clients through the deployment server. An attacker that compromised a Universal Forwarder endpoint could use the vulnerability to execute arbitrary code on all other Universal Forwarder endpoints subscribed to the deployment server.Show less

Splunk Enterprise deployment servers in versions before 9.0 allow unauthenticated downloading of forwarder bundles. Remediation requires you to update the deployment server to version 9.0 and Configure authentication for deployment servers and clients (https://docs.splunk.com/Documentation/Splunk/9.0.0/Security/ConfigDSDCAuthEnhancements#Configure_authentication_for_deployment_servers_and_clients). Once enabled, deployment servers can manage only Universal Forwarder versions 9.0 and higher. Though the vulnerability does not directly affect Universal Forwarders, remediation requires updating all Universal Forwarders that the deployment server manages to version 9.0 or higher prior to enabling the remediation.Show less

In Splunk Enterprise and Universal Forwarder versions before 9.0, the Splunk command-line interface (CLI) did not validate TLS certificates while connecting to a remote Splunk platform instance by default. After updating to version 9.0, see Configure TLS host name validation for the Splunk CLI https://docs.splunk.com/Documentation/Splunk/9.0.0/Security/EnableTLSCertHostnameValidation#Configure_TLS_host_name_validation_for_the_Splunk_CLI to enable the remediation. The vulnerability does not affect the Splunk Cloud Platform. At the time of publishing, we have no evidence of exploitation of this vulnerability by external parties. The issue requires conditions beyond the control of a potential bad actor such as a machine-in-the-middle attack. Hence, Splunk rates the complexity of the attack as High.Show less

In universal forwarder versions before 9.0, management services are available remotely by default. When not required, it introduces a potential exposure, but it is not a vulnerability. If exposed, we recommend each customer assess the potential severity specific to your environment. In 9.0, the universal forwarder now binds the management port to localhost preventing remote logins by default. If management services are not required in versions before 9.0, set disableDefaultPort = true in server.conf OR allowRemoteLogin = never in server.conf OR mgmtHostPort = localhost in web.conf. See Configure universal forwarder management security (https://docs.splunk.com/Documentation/Splunk/9.0.0/Security/EnableTLSCertHostnameValidation#Configure_universal_forwarder_management_security) for more information on disabling the remote management services.Show less

Dashboards in Splunk Enterprise versions before 9.0 might let an attacker inject risky search commands into a form token when the token is used in a query in a cross-origin request. The result bypasses SPL safeguards for risky commands. See New capabilities can limit access to some custom and potentially risky commands (https://docs.splunk.com/Documentation/Splunk/9.0.0/Security/SPLsafeguards#New_capabilities_can_limit_access_to_some_custom_and_potentially_risky_commands) for more information. Note that the attack is browser-based and an attacker cannot exploit it at will.Show less

Splunk Enterprise peers in Splunk Enterprise versions before 9.0 and Splunk Cloud Platform versions before 8.2.2203 did not validate the TLS certificates during Splunk-to-Splunk communications by default. Splunk peer communications configured properly with valid certificates were not vulnerable. However, an attacker with administrator credentials could add a peer without a valid certificate and connections from misconfigured nodes without valid certificates did not fail by default. For Splunk Enterprise, update to Splunk Enterprise version 9.0 and Configure TLS host name validation for Splunk-to-Splunk communications (https://docs.splunk.com/Documentation/Splunk/9.0.0/Security/EnableTLSCertHostnameValidation) to enable the remediation.Show less

Splunk Enterprise peers in Splunk Enterprise versions before 9.0 and Splunk Cloud Platform versions before 8.2.2203 did not validate the TLS certificates during Splunk-to-Splunk communications by default. Splunk peer communications configured properly with valid certificates were not vulnerable. However, an attacker with administrator credentials could add a peer without a valid certificate and connections from misconfigured nodes without valid certificates did not fail by default. For Splunk Enterprise, update to Splunk Enterprise version 9.0 and Configure TLS host name validation for Splunk-to-Splunk communications (https://docs.splunk.com/Documentation/Splunk/9.0.0/Security/EnableTLSCertHostnameValidation) to enable the remediation.Show less

The httplib and urllib Python libraries that Splunk shipped with Splunk Enterprise did not validate certificates using the certificate authority (CA) certificate stores by default in Splunk Enterprise versions before 9.0 and Splunk Cloud Platform versions before 8.2.2203. Python 3 client libraries now verify server certificates by default and use the appropriate CA certificate stores for each library. Apps and add-ons that include their own HTTP libraries are not affected. For Splunk Enterprise, update to Splunk Enterprise version 9.0 and Configure TLS host name validation for Splunk-to-Splunk communications (https://docs.splunk.com/Documentation/Splunk/9.0.0/Security/EnableTLSCertHostnameValidation) to enable the remediation.Show less

Using its HSTS support, curl can be instructed to use HTTPS directly insteadof using an insecure clear-text HTTP step even when HTTP is provided in theURL. This mechanism could be bypassed if the host name in the given URL used atrailing dot while not using one when it built the HSTS cache. Or the otherway around - by having the trailing dot in the HSTS cache and *not* using thetrailing dot in the URL.Show less

libcurl would reuse a previously created connection even when a TLS or SSHrelated option had been changed that should have prohibited reuse.libcurl keeps previously used connections in a connection pool for subsequenttransfers to reuse if one of them matches the setup. However, several TLS andSSH settings were left out from the configuration match checks, making themmatch too easily.Show less

libcurl provides the `CURLOPT_CERTINFO` option to allow applications torequest details to be returned about a server's certificate chain.Due to an erroneous function, a malicious server could make libcurl built withNSS get stuck in a never-ending busy-loop when trying to retrieve thatinformation.Show less

The curl URL parser wrongly accepts percent-encoded URL separators like '/'when decoding the host name part of a URL, making it a *different* URL usingthe wrong host name when it is later retrieved.For example, a URL like `http://example.com%2F127.0.0.1/`, would be allowed bythe parser and get transposed into `http://example.com/127.0.0.1/`. This flawcan be used to circumvent filters, checks and more.Show less

libcurl wrongly allows cookies to be set for Top Level Domains (TLDs) if thehost name is provided with a trailing dot.curl can be told to receive and send cookies. curl's "cookie engine" can bebuilt with or without [Public Suffix List](https://publicsuffix.org/)awareness. If PSL support not provided, a more rudimentary check exists to atleast prevent cookies from being set on TLDs. This check was broken if thehost name in the URL uses a trailing dot.This can allow arbitrary sites to set cookies that then would get sent to adifferent and unrelated site or domain.Show less