Openclaw

OpenClaw is a personal AI assistant. Prior to version 2026.2.14, a mismatch between `rawCommand` and `command[]` in the node host `system.run` handler could cause allowlist/approval evaluation to be performed on one command while executing a different argv. This only impacts deployments that use the node host / companion node execution path (`system.run` on a node), enable allowlist-based exec policy (`security=allowlist`) with approval prompting driven by allowlist misses (for example `ask=on-miss`), allow an attacker to invoke `system.run`. Default/non-node configurations are not affected. Version 2026.2.14 enforces `rawCommand`/`command[]` consistency (gateway fail-fast + node host validation).Show less

OpenClaw is a personal AI assistant. Prior to version 2026.2.14, OpenClaw's SSRF protection could be bypassed using full-form IPv4-mapped IPv6 literals such as `0:0:0:0:0:ffff:7f00:1` (which is `127.0.0.1`). This could allow requests that should be blocked (loopback / private network / link-local metadata) to pass the SSRF guard. Version 2026.2.14 patches the issue.Show less

OpenClaw is a personal AI assistant. Versions 2026.1.8 through 2026.2.13 have a command injection in the maintainer/dev script `scripts/update-clawtributors.ts`. The issue affects contributors/maintainers (or CI) who run `bun scripts/update-clawtributors.ts` in a source checkout that contains a malicious commit author email (e.g. crafted `@users[.]noreply[.]github[.]com` values). Normal CLI usage is not affected (`npm i -g openclaw`): this script is not part of the shipped CLI and is not executed during routine operation. The script derived a GitHub login from `git log` author metadata and interpolated it into a shell command (via `execSync`). A malicious commit record could inject shell metacharacters and execute arbitrary commands when the script is run. Version 2026.2.14 contains a patch.Show less

OpenClaw is a personal AI assistant. Prior to OpenClaw version 2026.2.14, the Gateway tool accepted a tool-supplied `gatewayUrl` without sufficient restrictions, which could cause the OpenClaw host to attempt outbound WebSocket connections to user-specified targets. This requires the ability to invoke tools that accept `gatewayUrl` overrides (directly or indirectly). In typical setups this is limited to authenticated operators, trusted automation, or environments where tool calls are exposed to non-operators. In other words, this is not a drive-by issue for arbitrary internet users unless a deployment explicitly allows untrusted users to trigger these tool calls. Some tool call paths allowed `gatewayUrl` overrides to flow into the Gateway WebSocket client without validation or allowlisting. This meant the host could be instructed to attempt connections to non-gateway endpoints (for example, localhost services, private network addresses, or cloud metadata IPs). In the common case, this results in an outbound connection attempt from the OpenClaw host (and corresponding errors/timeouts). In environments where the tool caller can observe the results, this can also be used for limited network reachability probing. If the target speaks WebSocket and is reachable, further interaction may be possible. Starting in version 2026.2.14, tool-supplied `gatewayUrl` overrides are restricted to loopback (on the configured gateway port) or the configured `gateway.remote.url`. Disallowed protocols, credentials, query/hash, and non-root paths are rejected.Show less

OpenClaw is a personal AI assistant. Prior to OpenClaw version 2026.2.14, the Feishu extension previously allowed `sendMediaFeishu` to treat attacker-controlled `mediaUrl` values as local filesystem paths and read them directly. If an attacker can influence tool calls (directly or via prompt injection), they may be able to exfiltrate local files by supplying paths such as `/etc/passwd` as `mediaUrl`. Upgrade to OpenClaw `2026.2.14` or newer to receive a fix. The fix removes direct local file reads from this path and routes media loading through hardened helpers that enforce local-root restrictions.Show less

OpenClaw is a personal AI assistant. OpenClaw macOS desktop client registers the `openclaw://` URL scheme. For `openclaw://agent` deep links without an unattended `key`, the app shows a confirmation dialog that previously displayed only the first 240 characters of the message, but executed the full message after the user clicked "Run." At the time of writing, the OpenClaw macOS desktop client is still in beta. In versions 2026.2.6 through 2026.2.13, an attacker could pad the message with whitespace to push a malicious payload outside the visible preview, increasing the chance a user approves a different message than the one that is actually executed. If a user runs the deep link, the agent may perform actions that can lead to arbitrary command execution depending on the user's configured tool approvals/allowlists. This is a social-engineering mediated vulnerability: the confirmation prompt could be made to misrepresent the executed message. The issue is fixed in 2026.2.14. Other mitigations include not approve unexpected "Run OpenClaw agent?" prompts triggered while browsing untrusted sites and usingunattended deep links only with a valid `key` for trusted personal automations.Show less

OpenClaw is a personal AI assistant. Versions 2026.2.13 and below allow the optional @openclaw/voice-call plugin Telnyx webhook handler to accept unsigned inbound webhook requests when telnyx.publicKey is not configured, enabling unauthenticated callers to forge Telnyx events. Telnyx webhooks are expected to be authenticated via Ed25519 signature verification. In affected versions, TelnyxProvider.verifyWebhook() could effectively fail open when no Telnyx public key was configured, allowing arbitrary HTTP POST requests to the voice-call webhook endpoint to be treated as legitimate Telnyx events. This only impacts deployments where the Voice Call plugin is installed, enabled, and the webhook endpoint is reachable from the attacker (for example, publicly exposed via a tunnel/proxy). The issue has been fixed in version 2026.2.14.Show less

OpenClaw is a personal AI assistant. Prior to 2026.2.14, browser-facing localhost mutation routes accepted cross-origin browser requests without explicit Origin/Referer validation. Loopback binding reduces remote exposure but does not prevent browser-initiated requests from malicious origins. A malicious website can trigger unauthorized state changes against a victim's local OpenClaw browser control plane (for example opening tabs, starting/stopping the browser, mutating storage/cookies) if the browser control service is reachable on loopback in the victim's browser context. Starting in version 2026.2.14, mutating HTTP methods (POST/PUT/PATCH/DELETE) are rejected when the request indicates a non-loopback Origin/Referer (or `Sec-Fetch-Site: cross-site`). Other mitigations include enabling browser control auth (token/password) and avoid running with auth disabled.Show less

OpenClaw is a personal AI assistant. Prior to 2026.2.13, the optional BlueBubbles iMessage channel plugin could accept webhook requests as authenticated based only on the TCP peer address being loopback (`127.0.0.1`, `::1`, `::ffff:127.0.0.1`) even when the configured webhook secret was missing or incorrect. This does not affect the default iMessage integration unless BlueBubbles is installed and enabled. Version 2026.2.13 contains a patch. Other mitigations include setting a non-empty BlueBubbles webhook password and avoiding deployments where a public-facing reverse proxy forwards to a loopback-bound Gateway without strong upstream authentication.Show less

OpenClaw is a personal AI assistant. In versions 2026.1.30 and below, if channels.telegram.webhookSecret is not set when in Telegram webhook mode, OpenClaw may accept webhook HTTP requests without verifying Telegram’s secret token header. In deployments where the webhook endpoint is reachable by an attacker, this can allow forged Telegram updates (for example spoofing message.from.id). If an attacker can reach the webhook endpoint, they may be able to send forged updates that are processed as if they came from Telegram. Depending on enabled commands/tools and configuration, this could lead to unintended bot actions. Note: Telegram webhook mode is not enabled by default. It is enabled only when `channels.telegram.webhookUrl` is configured. This issue has been fixed in version 2026.2.1.Show less

OpenClaw (formerly Clawdbot) is a personal AI assistant users run on their own devices. In versions 2026.2.2 and below, when the Slack integration is enabled, channel metadata (topic/description) can be incorporated into the model's system prompt. Prompt injection is a documented risk for LLM-driven systems. This issue increases the injection surface by allowing untrusted Slack channel metadata to be treated as higher-trust system input. This issue has been fixed in version 2026.2.3.Show less

OpenClaw is a personal AI assistant. Prior to 2026.1.20, an unauthenticated local client could use the Gateway WebSocket API to write config via config.apply and set unsafe cliPath values that were later used for command discovery, enabling command injection as the gateway user. This vulnerability is fixed in 2026.1.20.Show less

OpenClaw is a personal AI assistant. Prior to version 2026.1.30, the isValidMedia() function in src/media/parse.ts allows arbitrary file paths including absolute paths, home directory paths, and directory traversal sequences. An agent can read any file on the system by outputting MEDIA:/path/to/file, exfiltrating sensitive data to the user/channel. This issue has been patched in version 2026.1.30.Show less

OpenClaw is a personal AI assistant. Prior to version 2026.1.29, there is an OS command injection vulnerability via the Project Root Path in sshNodeCommand. The sshNodeCommand function constructed a shell script without properly escaping the user-supplied project path in an error message. When the cd command failed, the unescaped path was interpolated directly into an echo statement, allowing arbitrary command execution on the remote SSH host. The parseSSHTarget function did not validate that SSH target strings could not begin with a dash. An attacker-supplied target like -oProxyCommand=... would be interpreted as an SSH configuration flag rather than a hostname, allowing arbitrary command execution on the local machine. This issue has been patched in version 2026.1.29.Show less

OpenClaw (formerly Clawdbot) is a personal AI assistant you run on your own devices. Prior to 2026.1.29, a command injection vulnerability existed in OpenClaw’s Docker sandbox execution mechanism due to unsafe handling of the PATH environment variable when constructing shell commands. An authenticated user able to control environment variables could influence command execution within the container context. This vulnerability is fixed in 2026.1.29.Show less