Linux

In the Linux kernel, the following vulnerability has been resolved: batman-adv: bypass empty buckets in batadv_purge_orig_ref() Many syzbot reports are pointing to soft lockups in batadv_purge_orig_ref() [1] Root cause is unknown, but we can avoid spending too much time there and perhaps get more interesting reports. [1] watchdog: BUG: soft lockup - CPU#0 stuck for 27s! [kworker/u4:6:621] Modules linked in: irq event stamp: 6182794 hardirqs last enabled at (6182793): [<ffff8000801dae10>] __local_bh_enable_ip+0x224/0x44c kernel/softirq.c:386 hardirqs last disabled at (6182794): [<ffff80008ad66a78>] __el1_irq arch/arm64/kernel/entry-common.c:533 [inline] hardirqs last disabled at (6182794): [<ffff80008ad66a78>] el1_interrupt+0x24/0x68 arch/arm64/kernel/entry-common.c:551 softirqs last enabled at (6182792): [<ffff80008aab71c4>] spin_unlock_bh include/linux/spinlock.h:396 [inline] softirqs last enabled at (6182792): [<ffff80008aab71c4>] batadv_purge_orig_ref+0x114c/0x1228 net/batman-adv/originator.c:1287 softirqs last disabled at (6182790): [<ffff80008aab61dc>] spin_lock_bh include/linux/spinlock.h:356 [inline] softirqs last disabled at (6182790): [<ffff80008aab61dc>] batadv_purge_orig_ref+0x164/0x1228 net/batman-adv/originator.c:1271 CPU: 0 PID: 621 Comm: kworker/u4:6 Not tainted 6.8.0-rc7-syzkaller-g707081b61156 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/29/2024 Workqueue: bat_events batadv_purge_orig pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : should_resched arch/arm64/include/asm/preempt.h:79 [inline] pc : __local_bh_enable_ip+0x228/0x44c kernel/softirq.c:388 lr : __local_bh_enable_ip+0x224/0x44c kernel/softirq.c:386 sp : ffff800099007970 x29: ffff800099007980 x28: 1fffe00018fce1bd x27: dfff800000000000 x26: ffff0000d2620008 x25: ffff0000c7e70de8 x24: 0000000000000001 x23: 1fffe00018e57781 x22: dfff800000000000 x21: ffff80008aab71c4 x20: ffff0001b40136c0 x19: ffff0000c72bbc08 x18: 1fffe0001a817bb0 x17: ffff800125414000 x16: ffff80008032116c x15: 0000000000000001 x14: 1fffe0001ee9d610 x13: 0000000000000000 x12: 0000000000000003 x11: 0000000000000000 x10: 0000000000ff0100 x9 : 0000000000000000 x8 : 00000000005e5789 x7 : ffff80008aab61dc x6 : 0000000000000000 x5 : 0000000000000000 x4 : 0000000000000001 x3 : 0000000000000000 x2 : 0000000000000006 x1 : 0000000000000080 x0 : ffff800125414000 Call trace: __daif_local_irq_enable arch/arm64/include/asm/irqflags.h:27 [inline] arch_local_irq_enable arch/arm64/include/asm/irqflags.h:49 [inline] __local_bh_enable_ip+0x228/0x44c kernel/softirq.c:386 __raw_spin_unlock_bh include/linux/spinlock_api_smp.h:167 [inline] _raw_spin_unlock_bh+0x3c/0x4c kernel/locking/spinlock.c:210 spin_unlock_bh include/linux/spinlock.h:396 [inline] batadv_purge_orig_ref+0x114c/0x1228 net/batman-adv/originator.c:1287 batadv_purge_orig+0x20/0x70 net/batman-adv/originator.c:1300 process_one_work+0x694/0x1204 kernel/workqueue.c:2633 process_scheduled_works kernel/workqueue.c:2706 [inline] worker_thread+0x938/0xef4 kernel/workqueue.c:2787 kthread+0x288/0x310 kernel/kthread.c:388 ret_from_fork+0x10/0x20 arch/arm64/kernel/entry.S:860 Sending NMI from CPU 0 to CPUs 1: NMI backtrace for cpu 1 CPU: 1 PID: 0 Comm: swapper/1 Not tainted 6.8.0-rc7-syzkaller-g707081b61156 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/29/2024 pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : arch_local_irq_enable+0x8/0xc arch/arm64/include/asm/irqflags.h:51 lr : default_idle_call+0xf8/0x128 kernel/sched/idle.c:103 sp : ffff800093a17d30 x29: ffff800093a17d30 x28: dfff800000000000 x27: 1ffff00012742fb4 x26: ffff80008ec9d000 x25: 0000000000000000 x24: 0000000000000002 x23: 1ffff00011d93a74 x22: ffff80008ec9d3a0 x21: 0000000000000000 x20: ffff0000c19dbc00 x19: ffff8000802d0fd8 x18: 1fffe00036804396 x17: ffff80008ec9d000 x16: ffff8000802d089c x15: 0000000000000001 ---truncated---Show less

In the Linux kernel, the following vulnerability has been resolved: drop_monitor: replace spin_lock by raw_spin_lock trace_drop_common() is called with preemption disabled, and it acquires a spin_lock. This is problematic for RT kernels because spin_locks are sleeping locks in this configuration, which causes the following splat: BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48 in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 449, name: rcuc/47 preempt_count: 1, expected: 0 RCU nest depth: 2, expected: 2 5 locks held by rcuc/47/449: #0: ff1100086ec30a60 ((softirq_ctrl.lock)){+.+.}-{2:2}, at: __local_bh_disable_ip+0x105/0x210 #1: ffffffffb394a280 (rcu_read_lock){....}-{1:2}, at: rt_spin_lock+0xbf/0x130 #2: ffffffffb394a280 (rcu_read_lock){....}-{1:2}, at: __local_bh_disable_ip+0x11c/0x210 #3: ffffffffb394a160 (rcu_callback){....}-{0:0}, at: rcu_do_batch+0x360/0xc70 #4: ff1100086ee07520 (&data->lock){+.+.}-{2:2}, at: trace_drop_common.constprop.0+0xb5/0x290 irq event stamp: 139909 hardirqs last enabled at (139908): [<ffffffffb1df2b33>] _raw_spin_unlock_irqrestore+0x63/0x80 hardirqs last disabled at (139909): [<ffffffffb19bd03d>] trace_drop_common.constprop.0+0x26d/0x290 softirqs last enabled at (139892): [<ffffffffb07a1083>] __local_bh_enable_ip+0x103/0x170 softirqs last disabled at (139898): [<ffffffffb0909b33>] rcu_cpu_kthread+0x93/0x1f0 Preemption disabled at: [<ffffffffb1de786b>] rt_mutex_slowunlock+0xab/0x2e0 CPU: 47 PID: 449 Comm: rcuc/47 Not tainted 6.9.0-rc2-rt1+ #7 Hardware name: Dell Inc. PowerEdge R650/0Y2G81, BIOS 1.6.5 04/15/2022 Call Trace: <TASK> dump_stack_lvl+0x8c/0xd0 dump_stack+0x14/0x20 __might_resched+0x21e/0x2f0 rt_spin_lock+0x5e/0x130 ? trace_drop_common.constprop.0+0xb5/0x290 ? skb_queue_purge_reason.part.0+0x1bf/0x230 trace_drop_common.constprop.0+0xb5/0x290 ? preempt_count_sub+0x1c/0xd0 ? _raw_spin_unlock_irqrestore+0x4a/0x80 ? __pfx_trace_drop_common.constprop.0+0x10/0x10 ? rt_mutex_slowunlock+0x26a/0x2e0 ? skb_queue_purge_reason.part.0+0x1bf/0x230 ? __pfx_rt_mutex_slowunlock+0x10/0x10 ? skb_queue_purge_reason.part.0+0x1bf/0x230 trace_kfree_skb_hit+0x15/0x20 trace_kfree_skb+0xe9/0x150 kfree_skb_reason+0x7b/0x110 skb_queue_purge_reason.part.0+0x1bf/0x230 ? __pfx_skb_queue_purge_reason.part.0+0x10/0x10 ? mark_lock.part.0+0x8a/0x520 ... trace_drop_common() also disables interrupts, but this is a minor issue because we could easily replace it with a local_lock. Replace the spin_lock with raw_spin_lock to avoid sleeping in atomic context.Show less

In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix kernel crash during resume Currently during resume, QMI target memory is not properly handled, resulting in kernel crash in case DMA remap is not supported: BUG: Bad page state in process kworker/u16:54 pfn:36e80 page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x36e80 page dumped because: nonzero _refcount Call Trace: bad_page free_page_is_bad_report __free_pages_ok __free_pages dma_direct_free dma_free_attrs ath12k_qmi_free_target_mem_chunk ath12k_qmi_msg_mem_request_cb The reason is: Once ath12k module is loaded, firmware sends memory request to host. In case DMA remap not supported, ath12k refuses the first request due to failure in allocating with large segment size: ath12k_pci 0000:04:00.0: qmi firmware request memory request ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 7077888 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 8454144 ath12k_pci 0000:04:00.0: qmi dma allocation failed (7077888 B type 1), will try later with small size ath12k_pci 0000:04:00.0: qmi delays mem_request 2 ath12k_pci 0000:04:00.0: qmi firmware request memory request Later firmware comes back with more but small segments and allocation succeeds: ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 262144 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 65536 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 Now ath12k is working. If suspend is triggered, firmware will be reloaded during resume. As same as before, firmware requests two large segments at first. In ath12k_qmi_msg_mem_request_cb() segment count and size are assigned: ab->qmi.mem_seg_count == 2 ab->qmi.target_mem[0].size == 7077888 ab->qmi.target_mem[1].size == 8454144 Then allocation failed like before and ath12k_qmi_free_target_mem_chunk() is called to free all allocated segments. Note the first segment is skipped because its v.addr is cleared due to allocation failure: chunk->v.addr = dma_alloc_coherent() Also note that this leaks that segment because it has not been freed. While freeing the second segment, a size of 8454144 is passed to dma_free_coherent(). However remember that this segment is allocated at the first time firmware is loaded, before suspend. So its real size is 524288, much smaller than 8454144. As a result kernel found we are freeing some memory which is in use and thus cras ---truncated---Show less

In the Linux kernel, the following vulnerability has been resolved: scsi: qedi: Fix crash while reading debugfs attribute The qedi_dbg_do_not_recover_cmd_read() function invokes sprintf() directly on a __user pointer, which results into the crash. To fix this issue, use a small local stack buffer for sprintf() and then call simple_read_from_buffer(), which in turns make the copy_to_user() call. BUG: unable to handle page fault for address: 00007f4801111000 PGD 8000000864df6067 P4D 8000000864df6067 PUD 864df7067 PMD 846028067 PTE 0 Oops: 0002 [#1] PREEMPT SMP PTI Hardware name: HPE ProLiant DL380 Gen10/ProLiant DL380 Gen10, BIOS U30 06/15/2023 RIP: 0010:memcpy_orig+0xcd/0x130 RSP: 0018:ffffb7a18c3ffc40 EFLAGS: 00010202 RAX: 00007f4801111000 RBX: 00007f4801111000 RCX: 000000000000000f RDX: 000000000000000f RSI: ffffffffc0bfd7a0 RDI: 00007f4801111000 RBP: ffffffffc0bfd7a0 R08: 725f746f6e5f6f64 R09: 3d7265766f636572 R10: ffffb7a18c3ffd08 R11: 0000000000000000 R12: 00007f4881110fff R13: 000000007fffffff R14: ffffb7a18c3ffca0 R15: ffffffffc0bfd7af FS: 00007f480118a740(0000) GS:ffff98e38af00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f4801111000 CR3: 0000000864b8e001 CR4: 00000000007706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> ? __die_body+0x1a/0x60 ? page_fault_oops+0x183/0x510 ? exc_page_fault+0x69/0x150 ? asm_exc_page_fault+0x22/0x30 ? memcpy_orig+0xcd/0x130 vsnprintf+0x102/0x4c0 sprintf+0x51/0x80 qedi_dbg_do_not_recover_cmd_read+0x2f/0x50 [qedi 6bcfdeeecdea037da47069eca2ba717c84a77324] full_proxy_read+0x50/0x80 vfs_read+0xa5/0x2e0 ? folio_add_new_anon_rmap+0x44/0xa0 ? set_pte_at+0x15/0x30 ? do_pte_missing+0x426/0x7f0 ksys_read+0xa5/0xe0 do_syscall_64+0x58/0x80 ? __count_memcg_events+0x46/0x90 ? count_memcg_event_mm+0x3d/0x60 ? handle_mm_fault+0x196/0x2f0 ? do_user_addr_fault+0x267/0x890 ? exc_page_fault+0x69/0x150 entry_SYSCALL_64_after_hwframe+0x72/0xdc RIP: 0033:0x7f4800f20b4dShow less

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7921s: fix potential hung tasks during chip recovery During chip recovery (e.g. chip reset), there is a possible situation that kernel worker reset_work is holding the lock and waiting for kernel thread stat_worker to be parked, while stat_worker is waiting for the release of the same lock. It causes a deadlock resulting in the dumping of hung tasks messages and possible rebooting of the device. This patch prevents the execution of stat_worker during the chip recovery.Show less

In the Linux kernel, the following vulnerability has been resolved: drm/lima: mask irqs in timeout path before hard reset There is a race condition in which a rendering job might take just long enough to trigger the drm sched job timeout handler but also still complete before the hard reset is done by the timeout handler. This runs into race conditions not expected by the timeout handler. In some very specific cases it currently may result in a refcount imbalance on lima_pm_idle, with a stack dump such as: [10136.669170] WARNING: CPU: 0 PID: 0 at drivers/gpu/drm/lima/lima_devfreq.c:205 lima_devfreq_record_idle+0xa0/0xb0 ... [10136.669459] pc : lima_devfreq_record_idle+0xa0/0xb0 ... [10136.669628] Call trace: [10136.669634] lima_devfreq_record_idle+0xa0/0xb0 [10136.669646] lima_sched_pipe_task_done+0x5c/0xb0 [10136.669656] lima_gp_irq_handler+0xa8/0x120 [10136.669666] __handle_irq_event_percpu+0x48/0x160 [10136.669679] handle_irq_event+0x4c/0xc0 We can prevent that race condition entirely by masking the irqs at the beginning of the timeout handler, at which point we give up on waiting for that job entirely. The irqs will be enabled again at the next hard reset which is already done as a recovery by the timeout handler.Show less

In the Linux kernel, the following vulnerability has been resolved: platform/x86: x86-android-tablets: Unregister devices in reverse order Not all subsystems support a device getting removed while there are still consumers of the device with a reference to the device. One example of this is the regulator subsystem. If a regulator gets unregistered while there are still drivers holding a reference a WARN() at drivers/regulator/core.c:5829 triggers, e.g.: WARNING: CPU: 1 PID: 1587 at drivers/regulator/core.c:5829 regulator_unregister Hardware name: Intel Corp. VALLEYVIEW C0 PLATFORM/BYT-T FFD8, BIOS BLADE_21.X64.0005.R00.1504101516 FFD8_X64_R_2015_04_10_1516 04/10/2015 RIP: 0010:regulator_unregister Call Trace: <TASK> regulator_unregister devres_release_group i2c_device_remove device_release_driver_internal bus_remove_device device_del device_unregister x86_android_tablet_remove On the Lenovo Yoga Tablet 2 series the bq24190 charger chip also provides a 5V boost converter output for powering USB devices connected to the micro USB port, the bq24190-charger driver exports this as a Vbus regulator. On the 830 (8") and 1050 ("10") models this regulator is controlled by a platform_device and x86_android_tablet_remove() removes platform_device-s before i2c_clients so the consumer gets removed first. But on the 1380 (13") model there is a lc824206xa micro-USB switch connected over I2C and the extcon driver for that controls the regulator. The bq24190 i2c-client *must* be registered first, because that creates the regulator with the lc824206xa listed as its consumer. If the regulator has not been registered yet the lc824206xa driver will end up getting a dummy regulator. Since in this case both the regulator provider and consumer are I2C devices, the only way to ensure that the consumer is unregistered first is to unregister the I2C devices in reverse order of in which they were created. For consistency and to avoid similar problems in the future change x86_android_tablet_remove() to unregister all device types in reverse order.Show less

In the Linux kernel, the following vulnerability has been resolved: powerpc/pseries: Enforce hcall result buffer validity and size plpar_hcall(), plpar_hcall9(), and related functions expect callers to provide valid result buffers of certain minimum size. Currently this is communicated only through comments in the code and the compiler has no idea. For example, if I write a bug like this: long retbuf[PLPAR_HCALL_BUFSIZE]; // should be PLPAR_HCALL9_BUFSIZE plpar_hcall9(H_ALLOCATE_VAS_WINDOW, retbuf, ...); This compiles with no diagnostics emitted, but likely results in stack corruption at runtime when plpar_hcall9() stores results past the end of the array. (To be clear this is a contrived example and I have not found a real instance yet.) To make this class of error less likely, we can use explicitly-sized array parameters instead of pointers in the declarations for the hcall APIs. When compiled with -Warray-bounds[1], the code above now provokes a diagnostic like this: error: array argument is too small; is of size 32, callee requires at least 72 [-Werror,-Warray-bounds] 60 | plpar_hcall9(H_ALLOCATE_VAS_WINDOW, retbuf, | ^ ~~~~~~ [1] Enabled for LLVM builds but not GCC for now. See commit 0da6e5fd6c37 ("gcc: disable '-Warray-bounds' for gcc-13 too") and related changes.Show less

In the Linux kernel, the following vulnerability has been resolved: media: mtk-vcodec: potential null pointer deference in SCP The return value of devm_kzalloc() needs to be checked to avoid NULL pointer deference. This is similar to CVE-2022-3113.Show less

In the Linux kernel, the following vulnerability has been resolved: ext4: do not create EA inode under buffer lock ext4_xattr_set_entry() creates new EA inodes while holding buffer lock on the external xattr block. This is problematic as it nests all the allocation locking (which acquires locks on other buffers) under the buffer lock. This can even deadlock when the filesystem is corrupted and e.g. quota file is setup to contain xattr block as data block. Move the allocation of EA inode out of ext4_xattr_set_entry() into the callers.Show less

In the Linux kernel, the following vulnerability has been resolved: f2fs: remove clear SB_INLINECRYPT flag in default_options In f2fs_remount, SB_INLINECRYPT flag will be clear and re-set. If create new file or open file during this gap, these files will not use inlinecrypt. Worse case, it may lead to data corruption if wrappedkey_v0 is enable. Thread A: Thread B: -f2fs_remount -f2fs_file_open or f2fs_new_inode -default_options <- clear SB_INLINECRYPT flag -fscrypt_select_encryption_impl -parse_options <- set SB_INLINECRYPT againShow less

In the Linux kernel, the following vulnerability has been resolved: Avoid hw_desc array overrun in dw-axi-dmac I have a use case where nr_buffers = 3 and in which each descriptor is composed by 3 segments, resulting in the DMA channel descs_allocated to be 9. Since axi_desc_put() handles the hw_desc considering the descs_allocated, this scenario would result in a kernel panic (hw_desc array will be overrun). To fix this, the proposal is to add a new member to the axi_dma_desc structure, where we keep the number of allocated hw_descs (axi_desc_alloc()) and use it in axi_desc_put() to handle the hw_desc array correctly. Additionally I propose to remove the axi_chan_start_first_queued() call after completing the transfer, since it was identified that unbalance can occur (started descriptors can be interrupted and transfer ignored due to DMA channel not being enabled).Show less

In the Linux kernel, the following vulnerability has been resolved: f2fs: don't set RO when shutting down f2fs Shutdown does not check the error of thaw_super due to readonly, which causes a deadlock like below. f2fs_ioc_shutdown(F2FS_GOING_DOWN_FULLSYNC) issue_discard_thread - bdev_freeze - freeze_super - f2fs_stop_checkpoint() - f2fs_handle_critical_error - sb_start_write - set RO - waiting - bdev_thaw - thaw_super_locked - return -EINVAL, if sb_rdonly() - f2fs_stop_discard_thread -> wait for kthread_stop(discard_thread);Show less

In the Linux kernel, the following vulnerability has been resolved: MIPS: Octeon: Add PCIe link status check The standard PCIe configuration read-write interface is used to access the configuration space of the peripheral PCIe devices of the mips processor after the PCIe link surprise down, it can generate kernel panic caused by "Data bus error". So it is necessary to add PCIe link status check for system protection. When the PCIe link is down or in training, assigning a value of 0 to the configuration address can prevent read-write behavior to the configuration space of peripheral PCIe devices, thereby preventing kernel panic.Show less

In the Linux kernel, the following vulnerability has been resolved: serial: imx: Introduce timeout when waiting on transmitter empty By waiting at most 1 second for USR2_TXDC to be set, we avoid a potential deadlock. In case of the timeout, there is not much we can do, so we simply ignore the transmitter state and optimistically try to continue.Show less

In the Linux kernel, the following vulnerability has been resolved: tty: add the option to have a tty reject a new ldisc ... and use it to limit the virtual terminals to just N_TTY. They are kind of special, and in particular, the "con_write()" routine violates the "writes cannot sleep" rule that some ldiscs rely on. This avoids the BUG: sleeping function called from invalid context at kernel/printk/printk.c:2659 when N_GSM has been attached to a virtual console, and gsmld_write() calls con_write() while holding a spinlock, and con_write() then tries to get the console lock.Show less

In the Linux kernel, the following vulnerability has been resolved: i2c: lpi2c: Avoid calling clk_get_rate during transfer Instead of repeatedly calling clk_get_rate for each transfer, lock the clock rate and cache the value. A deadlock has been observed while adding tlv320aic32x4 audio codec to the system. When this clock provider adds its clock, the clk mutex is locked already, it needs to access i2c, which in return needs the mutex for clk_get_rate as well.Show less

In the Linux kernel, the following vulnerability has been resolved: ALSA: hda: cs35l41: Possible null pointer dereference in cs35l41_hda_unbind() The cs35l41_hda_unbind() function clears the hda_component entry matching it's index and then dereferences the codec pointer held in the first element of the hda_component array, this is an issue when the device index was 0. Instead use the codec pointer stashed in the cs35l41_hda structure as it will still be valid.Show less

In the Linux kernel, the following vulnerability has been resolved: mips: bmips: BCM6358: make sure CBR is correctly set It was discovered that some device have CBR address set to 0 causing kernel panic when arch_sync_dma_for_cpu_all is called. This was notice in situation where the system is booted from TP1 and BMIPS_GET_CBR() returns 0 instead of a valid address and !!(read_c0_brcm_cmt_local() & (1 << 31)); not failing. The current check whether RAC flush should be disabled or not are not enough hence lets check if CBR is a valid address or not.Show less

In the Linux kernel, the following vulnerability has been resolved: btrfs: zoned: allocate dummy checksums for zoned NODATASUM writes Shin'ichiro reported that when he's running fstests' test-case btrfs/167 on emulated zoned devices, he's seeing the following NULL pointer dereference in 'btrfs_zone_finish_endio()': Oops: general protection fault, probably for non-canonical address 0xdffffc0000000011: 0000 [#1] PREEMPT SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000088-0x000000000000008f] CPU: 4 PID: 2332440 Comm: kworker/u80:15 Tainted: G W 6.10.0-rc2-kts+ #4 Hardware name: Supermicro Super Server/X11SPi-TF, BIOS 3.3 02/21/2020 Workqueue: btrfs-endio-write btrfs_work_helper [btrfs] RIP: 0010:btrfs_zone_finish_endio.part.0+0x34/0x160 [btrfs] RSP: 0018:ffff88867f107a90 EFLAGS: 00010206 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffffff893e5534 RDX: 0000000000000011 RSI: 0000000000000004 RDI: 0000000000000088 RBP: 0000000000000002 R08: 0000000000000001 R09: ffffed1081696028 R10: ffff88840b4b0143 R11: ffff88834dfff600 R12: ffff88840b4b0000 R13: 0000000000020000 R14: 0000000000000000 R15: ffff888530ad5210 FS: 0000000000000000(0000) GS:ffff888e3f800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f87223fff38 CR3: 00000007a7c6a002 CR4: 00000000007706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> ? __die_body.cold+0x19/0x27 ? die_addr+0x46/0x70 ? exc_general_protection+0x14f/0x250 ? asm_exc_general_protection+0x26/0x30 ? do_raw_read_unlock+0x44/0x70 ? btrfs_zone_finish_endio.part.0+0x34/0x160 [btrfs] btrfs_finish_one_ordered+0x5d9/0x19a0 [btrfs] ? __pfx_lock_release+0x10/0x10 ? do_raw_write_lock+0x90/0x260 ? __pfx_do_raw_write_lock+0x10/0x10 ? __pfx_btrfs_finish_one_ordered+0x10/0x10 [btrfs] ? _raw_write_unlock+0x23/0x40 ? btrfs_finish_ordered_zoned+0x5a9/0x850 [btrfs] ? lock_acquire+0x435/0x500 btrfs_work_helper+0x1b1/0xa70 [btrfs] ? __schedule+0x10a8/0x60b0 ? __pfx___might_resched+0x10/0x10 process_one_work+0x862/0x1410 ? __pfx_lock_acquire+0x10/0x10 ? __pfx_process_one_work+0x10/0x10 ? assign_work+0x16c/0x240 worker_thread+0x5e6/0x1010 ? __pfx_worker_thread+0x10/0x10 kthread+0x2c3/0x3a0 ? trace_irq_enable.constprop.0+0xce/0x110 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x31/0x70 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> Enabling CONFIG_BTRFS_ASSERT revealed the following assertion to trigger: assertion failed: !list_empty(&ordered->list), in fs/btrfs/zoned.c:1815 This indicates, that we're missing the checksums list on the ordered_extent. As btrfs/167 is doing a NOCOW write this is to be expected. Further analysis with drgn confirmed the assumption: >>> inode = prog.crashed_thread().stack_trace()[11]['ordered'].inode >>> btrfs_inode = drgn.container_of(inode, "struct btrfs_inode", \ "vfs_inode") >>> print(btrfs_inode.flags) (u32)1 As zoned emulation mode simulates conventional zones on regular devices, we cannot use zone-append for writing. But we're only attaching dummy checksums if we're doing a zone-append write. So for NOCOW zoned data writes on conventional zones, also attach a dummy checksum.Show less