Linux

In the Linux kernel, the following vulnerability has been resolved: net: rswitch: Avoid use-after-free in rswitch_poll() The use-after-free is actually in rswitch_tx_free(), which is inlined in rswitch_poll(). Since `skb` and `gq->skbs[gq->dirty]` are in fact the same pointer, the skb is first freed using dev_kfree_skb_any(), then the value in skb->len is used to update the interface statistics. Let's move around the instructions to use skb->len before the skb is freed. This bug is trivial to reproduce using KFENCE. It will trigger a splat every few packets. A simple ARP request or ICMP echo request is enough.Show less

In the Linux kernel, the following vulnerability has been resolved: ice: Don't process extts if PTP is disabled The ice_ptp_extts_event() function can race with ice_ptp_release() and result in a NULL pointer dereference which leads to a kernel panic. Panic occurs because the ice_ptp_extts_event() function calls ptp_clock_event() with a NULL pointer. The ice driver has already released the PTP clock by the time the interrupt for the next external timestamp event occurs. To fix this, modify the ice_ptp_extts_event() function to check the PTP state and bail early if PTP is not ready.Show less

In the Linux kernel, the following vulnerability has been resolved: inet_diag: Initialize pad field in struct inet_diag_req_v2 KMSAN reported uninit-value access in raw_lookup() [1]. Diag for raw sockets uses the pad field in struct inet_diag_req_v2 for the underlying protocol. This field corresponds to the sdiag_raw_protocol field in struct inet_diag_req_raw. inet_diag_get_exact_compat() converts inet_diag_req to inet_diag_req_v2, but leaves the pad field uninitialized. So the issue occurs when raw_lookup() accesses the sdiag_raw_protocol field. Fix this by initializing the pad field in inet_diag_get_exact_compat(). Also, do the same fix in inet_diag_dump_compat() to avoid the similar issue in the future. [1] BUG: KMSAN: uninit-value in raw_lookup net/ipv4/raw_diag.c:49 [inline] BUG: KMSAN: uninit-value in raw_sock_get+0x657/0x800 net/ipv4/raw_diag.c:71 raw_lookup net/ipv4/raw_diag.c:49 [inline] raw_sock_get+0x657/0x800 net/ipv4/raw_diag.c:71 raw_diag_dump_one+0xa1/0x660 net/ipv4/raw_diag.c:99 inet_diag_cmd_exact+0x7d9/0x980 inet_diag_get_exact_compat net/ipv4/inet_diag.c:1404 [inline] inet_diag_rcv_msg_compat+0x469/0x530 net/ipv4/inet_diag.c:1426 sock_diag_rcv_msg+0x23d/0x740 net/core/sock_diag.c:282 netlink_rcv_skb+0x537/0x670 net/netlink/af_netlink.c:2564 sock_diag_rcv+0x35/0x40 net/core/sock_diag.c:297 netlink_unicast_kernel net/netlink/af_netlink.c:1335 [inline] netlink_unicast+0xe74/0x1240 net/netlink/af_netlink.c:1361 netlink_sendmsg+0x10c6/0x1260 net/netlink/af_netlink.c:1905 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x332/0x3d0 net/socket.c:745 ____sys_sendmsg+0x7f0/0xb70 net/socket.c:2585 ___sys_sendmsg+0x271/0x3b0 net/socket.c:2639 __sys_sendmsg net/socket.c:2668 [inline] __do_sys_sendmsg net/socket.c:2677 [inline] __se_sys_sendmsg net/socket.c:2675 [inline] __x64_sys_sendmsg+0x27e/0x4a0 net/socket.c:2675 x64_sys_call+0x135e/0x3ce0 arch/x86/include/generated/asm/syscalls_64.h:47 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xd9/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Uninit was stored to memory at: raw_sock_get+0x650/0x800 net/ipv4/raw_diag.c:71 raw_diag_dump_one+0xa1/0x660 net/ipv4/raw_diag.c:99 inet_diag_cmd_exact+0x7d9/0x980 inet_diag_get_exact_compat net/ipv4/inet_diag.c:1404 [inline] inet_diag_rcv_msg_compat+0x469/0x530 net/ipv4/inet_diag.c:1426 sock_diag_rcv_msg+0x23d/0x740 net/core/sock_diag.c:282 netlink_rcv_skb+0x537/0x670 net/netlink/af_netlink.c:2564 sock_diag_rcv+0x35/0x40 net/core/sock_diag.c:297 netlink_unicast_kernel net/netlink/af_netlink.c:1335 [inline] netlink_unicast+0xe74/0x1240 net/netlink/af_netlink.c:1361 netlink_sendmsg+0x10c6/0x1260 net/netlink/af_netlink.c:1905 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x332/0x3d0 net/socket.c:745 ____sys_sendmsg+0x7f0/0xb70 net/socket.c:2585 ___sys_sendmsg+0x271/0x3b0 net/socket.c:2639 __sys_sendmsg net/socket.c:2668 [inline] __do_sys_sendmsg net/socket.c:2677 [inline] __se_sys_sendmsg net/socket.c:2675 [inline] __x64_sys_sendmsg+0x27e/0x4a0 net/socket.c:2675 x64_sys_call+0x135e/0x3ce0 arch/x86/include/generated/asm/syscalls_64.h:47 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xd9/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Local variable req.i created at: inet_diag_get_exact_compat net/ipv4/inet_diag.c:1396 [inline] inet_diag_rcv_msg_compat+0x2a6/0x530 net/ipv4/inet_diag.c:1426 sock_diag_rcv_msg+0x23d/0x740 net/core/sock_diag.c:282 CPU: 1 PID: 8888 Comm: syz-executor.6 Not tainted 6.10.0-rc4-00217-g35bb670d65fc #32 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-2.fc40 04/01/2014Show less

In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix inode number range checks Patch series "nilfs2: fix potential issues related to reserved inodes". This series fixes one use-after-free issue reported by syzbot, caused by nilfs2's internal inode being exposed in the namespace on a corrupted filesystem, and a couple of flaws that cause problems if the starting number of non-reserved inodes written in the on-disk super block is intentionally (or corruptly) changed from its default value. This patch (of 3): In the current implementation of nilfs2, "nilfs->ns_first_ino", which gives the first non-reserved inode number, is read from the superblock, but its lower limit is not checked. As a result, if a number that overlaps with the inode number range of reserved inodes such as the root directory or metadata files is set in the super block parameter, the inode number test macros (NILFS_MDT_INODE and NILFS_VALID_INODE) will not function properly. In addition, these test macros use left bit-shift calculations using with the inode number as the shift count via the BIT macro, but the result of a shift calculation that exceeds the bit width of an integer is undefined in the C specification, so if "ns_first_ino" is set to a large value other than the default value NILFS_USER_INO (=11), the macros may potentially malfunction depending on the environment. Fix these issues by checking the lower bound of "nilfs->ns_first_ino" and by preventing bit shifts equal to or greater than the NILFS_USER_INO constant in the inode number test macros. Also, change the type of "ns_first_ino" from signed integer to unsigned integer to avoid the need for type casting in comparisons such as the lower bound check introduced this time.Show less

In the Linux kernel, the following vulnerability has been resolved: nilfs2: add missing check for inode numbers on directory entries Syzbot reported that mounting and unmounting a specific pattern of corrupted nilfs2 filesystem images causes a use-after-free of metadata file inodes, which triggers a kernel bug in lru_add_fn(). As Jan Kara pointed out, this is because the link count of a metadata file gets corrupted to 0, and nilfs_evict_inode(), which is called from iput(), tries to delete that inode (ifile inode in this case). The inconsistency occurs because directories containing the inode numbers of these metadata files that should not be visible in the namespace are read without checking. Fix this issue by treating the inode numbers of these internal files as errors in the sanity check helper when reading directory folios/pages. Also thanks to Hillf Danton and Matthew Wilcox for their initial mm-layer analysis.Show less

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix adding block group to a reclaim list and the unused list during reclaim There is a potential parallel list adding for retrying in btrfs_reclaim_bgs_work and adding to the unused list. Since the block group is removed from the reclaim list and it is on a relocation work, it can be added into the unused list in parallel. When that happens, adding it to the reclaim list will corrupt the list head and trigger list corruption like below. Fix it by taking fs_info->unused_bgs_lock. [177.504][T2585409] BTRFS error (device nullb1): error relocating ch= unk 2415919104 [177.514][T2585409] list_del corruption. next->prev should be ff1100= 0344b119c0, but was ff11000377e87c70. (next=3Dff110002390cd9c0) [177.529][T2585409] ------------[ cut here ]------------ [177.537][T2585409] kernel BUG at lib/list_debug.c:65! [177.545][T2585409] Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN NOPTI [177.555][T2585409] CPU: 9 PID: 2585409 Comm: kworker/u128:2 Tainted: G W 6.10.0-rc5-kts #1 [177.568][T2585409] Hardware name: Supermicro SYS-520P-WTR/X12SPW-TF, BIOS 1.2 02/14/2022 [177.579][T2585409] Workqueue: events_unbound btrfs_reclaim_bgs_work[btrfs] [177.589][T2585409] RIP: 0010:__list_del_entry_valid_or_report.cold+0x70/0x72 [177.624][T2585409] RSP: 0018:ff11000377e87a70 EFLAGS: 00010286 [177.633][T2585409] RAX: 000000000000006d RBX: ff11000344b119c0 RCX:0000000000000000 [177.644][T2585409] RDX: 000000000000006d RSI: 0000000000000008 RDI:ffe21c006efd0f40 [177.655][T2585409] RBP: ff110002e0509f78 R08: 0000000000000001 R09:ffe21c006efd0f08 [177.665][T2585409] R10: ff11000377e87847 R11: 0000000000000000 R12:ff110002390cd9c0 [177.676][T2585409] R13: ff11000344b119c0 R14: ff110002e0508000 R15:dffffc0000000000 [177.687][T2585409] FS: 0000000000000000(0000) GS:ff11000fec880000(0000) knlGS:0000000000000000 [177.700][T2585409] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [177.709][T2585409] CR2: 00007f06bc7b1978 CR3: 0000001021e86005 CR4:0000000000771ef0 [177.720][T2585409] DR0: 0000000000000000 DR1: 0000000000000000 DR2:0000000000000000 [177.731][T2585409] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7:0000000000000400 [177.742][T2585409] PKRU: 55555554 [177.748][T2585409] Call Trace: [177.753][T2585409] <TASK> [177.759][T2585409] ? __die_body.cold+0x19/0x27 [177.766][T2585409] ? die+0x2e/0x50 [177.772][T2585409] ? do_trap+0x1ea/0x2d0 [177.779][T2585409] ? __list_del_entry_valid_or_report.cold+0x70/0x72 [177.788][T2585409] ? do_error_trap+0xa3/0x160 [177.795][T2585409] ? __list_del_entry_valid_or_report.cold+0x70/0x72 [177.805][T2585409] ? handle_invalid_op+0x2c/0x40 [177.812][T2585409] ? __list_del_entry_valid_or_report.cold+0x70/0x72 [177.820][T2585409] ? exc_invalid_op+0x2d/0x40 [177.827][T2585409] ? asm_exc_invalid_op+0x1a/0x20 [177.834][T2585409] ? __list_del_entry_valid_or_report.cold+0x70/0x72 [177.843][T2585409] btrfs_delete_unused_bgs+0x3d9/0x14c0 [btrfs] There is a similar retry_list code in btrfs_delete_unused_bgs(), but it is safe, AFAICS. Since the block group was in the unused list, the used bytes should be 0 when it was added to the unused list. Then, it checks block_group->{used,reserved,pinned} are still 0 under the block_group->lock. So, they should be still eligible for the unused list, not the reclaim list. The reason it is safe there it's because because we're holding space_info->groups_sem in write mode. That means no other task can allocate from the block group, so while we are at deleted_unused_bgs() it's not possible for other tasks to allocate and deallocate extents from the block group, so it can't be added to the unused list or the reclaim list by anyone else. The bug can be reproduced by btrfs/166 after a few rounds. In practice this can be hit when relocation cannot find more chunk space and ends with ENOSPC.Show less

In the Linux kernel, the following vulnerability has been resolved: Revert "mm/writeback: fix possible divide-by-zero in wb_dirty_limits(), again" Patch series "mm: Avoid possible overflows in dirty throttling". Dirty throttling logic assumes dirty limits in page units fit into 32-bits. This patch series makes sure this is true (see patch 2/2 for more details). This patch (of 2): This reverts commit 9319b647902cbd5cc884ac08a8a6d54ce111fc78. The commit is broken in several ways. Firstly, the removed (u64) cast from the multiplication will introduce a multiplication overflow on 32-bit archs if wb_thresh * bg_thresh >= 1<<32 (which is actually common - the default settings with 4GB of RAM will trigger this). Secondly, the div64_u64() is unnecessarily expensive on 32-bit archs. We have div64_ul() in case we want to be safe & cheap. Thirdly, if dirty thresholds are larger than 1<<32 pages, then dirty balancing is going to blow up in many other spectacular ways anyway so trying to fix one possible overflow is just moot.Show less

In the Linux kernel, the following vulnerability has been resolved: drm/nouveau: fix null pointer dereference in nouveau_connector_get_modes In nouveau_connector_get_modes(), the return value of drm_mode_duplicate() is assigned to mode, which will lead to a possible NULL pointer dereference on failure of drm_mode_duplicate(). Add a check to avoid npd.Show less

In the Linux kernel, the following vulnerability has been resolved: clk: sunxi-ng: common: Don't call hw_to_ccu_common on hw without common In order to set the rate range of a hw sunxi_ccu_probe calls hw_to_ccu_common() assuming all entries in desc->ccu_clks are contained in a ccu_common struct. This assumption is incorrect and, in consequence, causes invalid pointer de-references. Remove the faulty call. Instead, add one more loop that iterates over the ccu_clks and sets the rate range, if required.Show less

In the Linux kernel, the following vulnerability has been resolved: s390/dasd: Fix invalid dereferencing of indirect CCW data pointer Fix invalid dereferencing of indirect CCW data pointer in dasd_eckd_dump_sense() that leads to a kernel panic in error cases. When using indirect addressing for DASD CCWs (IDAW) the CCW CDA pointer does not contain the data address itself but a pointer to the IDAL. This needs to be translated from physical to virtual as well before using it. This dereferencing is also used for dasd_page_cache and also fixed although it is very unlikely that this code path ever gets used.Show less

In the Linux kernel, the following vulnerability has been resolved: media: mediatek: vcodec: Only free buffer VA that is not NULL In the MediaTek vcodec driver, while mtk_vcodec_mem_free() is mostly called only when the buffer to free exists, there are some instances that didn't do the check and triggered warnings in practice. We believe those checks were forgotten unintentionally. Add the checks back to fix the warnings.Show less

In the Linux kernel, the following vulnerability has been resolved: crypto: ecdh - explicitly zeroize private_key private_key is overwritten with the key parameter passed in by the caller (if present), or alternatively a newly generated private key. However, it is possible that the caller provides a key (or the newly generated key) which is shorter than the previous key. In that scenario, some key material from the previous key would not be overwritten. The easiest solution is to explicitly zeroize the entire private_key array first. Note that this patch slightly changes the behavior of this function: previously, if the ecc_gen_privkey failed, the old private_key would remain. Now, the private_key is always zeroized. This behavior is consistent with the case where params.key is set and ecc_is_key_valid fails.Show less

In the Linux kernel, the following vulnerability has been resolved: ALSA: emux: improve patch ioctl data validation In load_data(), make the validation of and skipping over the main info block match that in load_guspatch(). In load_guspatch(), add checking that the specified patch length matches the actually supplied data, like load_data() already did.Show less

In the Linux kernel, the following vulnerability has been resolved: x86: stop playing stack games in profile_pc() The 'profile_pc()' function is used for timer-based profiling, which isn't really all that relevant any more to begin with, but it also ends up making assumptions based on the stack layout that aren't necessarily valid. Basically, the code tries to account the time spent in spinlocks to the caller rather than the spinlock, and while I support that as a concept, it's not worth the code complexity or the KASAN warnings when no serious profiling is done using timers anyway these days. And the code really does depend on stack layout that is only true in the simplest of cases. We've lost the comment at some point (I think when the 32-bit and 64-bit code was unified), but it used to say: Assume the lock function has either no stack frame or a copy of eflags from PUSHF. which explains why it just blindly loads a word or two straight off the stack pointer and then takes a minimal look at the values to just check if they might be eflags or the return pc: Eflags always has bits 22 and up cleared unlike kernel addresses but that basic stack layout assumption assumes that there isn't any lock debugging etc going on that would complicate the code and cause a stack frame. It causes KASAN unhappiness reported for years by syzkaller [1] and others [2]. With no real practical reason for this any more, just remove the code. Just for historical interest, here's some background commits relating to this code from 2006: 0cb91a229364 ("i386: Account spinlocks to the caller during profiling for !FP kernels") 31679f38d886 ("Simplify profile_pc on x86-64") and a code unification from 2009: ef4512882dbe ("x86: time_32/64.c unify profile_pc") but the basics of this thing actually goes back to before the git tree.Show less

In the Linux kernel, the following vulnerability has been resolved: serial: 8250_omap: Implementation of Errata i2310 As per Errata i2310[0], Erroneous timeout can be triggered, if this Erroneous interrupt is not cleared then it may leads to storm of interrupts, therefore apply Errata i2310 solution. [0] https://www.ti.com/lit/pdf/sprz536 page 23Show less

In the Linux kernel, the following vulnerability has been resolved: net/iucv: Avoid explicit cpumask var allocation on stack For CONFIG_CPUMASK_OFFSTACK=y kernel, explicit allocation of cpumask variable on stack is not recommended since it can cause potential stack overflow. Instead, kernel code should always use *cpumask_var API(s) to allocate cpumask var in config-neutral way, leaving allocation strategy to CONFIG_CPUMASK_OFFSTACK. Use *cpumask_var API(s) to address it.Show less

In the Linux kernel, the following vulnerability has been resolved: net/dpaa2: Avoid explicit cpumask var allocation on stack For CONFIG_CPUMASK_OFFSTACK=y kernel, explicit allocation of cpumask variable on stack is not recommended since it can cause potential stack overflow. Instead, kernel code should always use *cpumask_var API(s) to allocate cpumask var in config-neutral way, leaving allocation strategy to CONFIG_CPUMASK_OFFSTACK. Use *cpumask_var API(s) to address it.Show less

In the Linux kernel, the following vulnerability has been resolved: gpio: davinci: Validate the obtained number of IRQs Value of pdata->gpio_unbanked is taken from Device Tree. In case of broken DT due to any error this value can be any. Without this value validation there can be out of chips->irqs array boundaries access in davinci_gpio_probe(). Validate the obtained nirq value so that it won't exceed the maximum number of IRQs per bank. Found by Linux Verification Center (linuxtesting.org) with SVACE.Show less

In the Linux kernel, the following vulnerability has been resolved: drm/xe: Check pat.ops before dumping PAT settings We may leave pat.ops unset when running on brand new platform or when running as a VF. While the former is unlikely, the latter is valid (future) use case and will cause NPD when someone will try to dump PAT settings by debugfs. It's better to check pointer to pat.ops instead of specific .dump hook, as we have this hook always defined for every .ops variant.Show less

In the Linux kernel, the following vulnerability has been resolved: pinctrl: fix deadlock in create_pinctrl() when handling -EPROBE_DEFER In create_pinctrl(), pinctrl_maps_mutex is acquired before calling add_setting(). If add_setting() returns -EPROBE_DEFER, create_pinctrl() calls pinctrl_free(). However, pinctrl_free() attempts to acquire pinctrl_maps_mutex, which is already held by create_pinctrl(), leading to a potential deadlock. This patch resolves the issue by releasing pinctrl_maps_mutex before calling pinctrl_free(), preventing the deadlock. This bug was discovered and resolved using Coverity Static Analysis Security Testing (SAST) by Synopsys, Inc.Show less