Linux

In the Linux kernel, the following vulnerability has been resolved: wifi: nl80211: reject oversized EMA RNR lists nl80211_parse_rnr_elems() stores the parsed element count in a u8-backed cfg80211_rnr_elems::cnt field and uses that count to size the flexible array allocation. Reject nested NL80211_ATTR_EMA_RNR_ELEMS input once the count reaches 255, before incrementing it again. This keeps the parser aligned with the data structure it fills and matches the existing bound check used by nl80211_parse_mbssid_elems().Show less

In the Linux kernel, the following vulnerability has been resolved: vsock/vmci: fix sk_ack_backlog leak on failed handshake When vmci_transport_recv_connecting_server() returns an error, vmci_transport_recv_listen() calls vsock_remove_pending() but never calls sk_acceptq_removed(). This leaves sk_ack_backlog incremented permanently. Repeated handshake failures (malformed packets, queue pair alloc failure, event subscribe failure) cause sk_ack_backlog to climb toward sk_max_ack_backlog. Once it reaches the limit the listener permanently refuses all new connections with -ECONNREFUSED, a silent denial of service requiring a process restart to recover. The two existing sk_acceptq_removed() calls in af_vsock.c do not cover this path: line 764 checks vsock_is_pending() which returns false after vsock_remove_pending(), and line 1889 is only reached on successful accept(). Fix by balancing sk_acceptq_added() with sk_acceptq_removed() on the error path.Show less

In the Linux kernel, the following vulnerability has been resolved: timers/migration: Fix livelock in tmigr_handle_remote_up() tmigr_handle_remote_cpu() skips timer_expire_remote() when cpu == smp_processor_id(), assuming the local softirq path already handled this CPU's timers. This assumption is wrong because jiffies can advance after the handling of the CPU's global timers in run_timer_base(BASE_GLOBAL) and before tmigr_handle_remote() evaluates the expiry times. As a consequence a timer which expires after the CPU local timer wheel advanced and becomes expired in the remote handling is ignored and the callback is never invoked and removed from the timer wheel. What's worse is that fetch_next_timer_interrupt_remote() keeps reporting it as expired, and the event is re-queued with expires == now on each iteration. The goto-again loop spins indefinitely. Fix this by calling timer_expire_remote() unconditionally. That's minimal overhead for the common case as __run_timer_base() returns immediately if there is nothing to expire in the local wheel. [ tglx: Amend change log and add a comment ]Show less

In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix buffer over-read in rtw_update_protection rtw_update_protection() is called with a pointer offset into the ies buffer but the full ie_length is passed, causing a potential buffer over-read.Show less

In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: rtw_mlme: add bounds checks before ie_length subtraction Add guards to ensure ie_length is large enough before subtracting fixed IE offsets to prevent unsigned integer underflow.Show less

In the Linux kernel, the following vulnerability has been resolved: bnxt_en: Fix NULL pointer dereference PCIe errors detected by a Root Port or Downstream Port cause error recovery services to run on all subordinate devices regardless of administrative state. The .error_detected() callback, bnxt_io_error_detected(), disables and synchronizes IRQs via bnxt_disable_int_sync(), which calls bnxt_cp_num_to_irq_num() to map completion rings to IRQs using bp->bnapi. Since bp->bnapi is allocated on NIC open and freed on NIC close, PCIe error recovery on a closed NIC can dereference a NULL pointer. Check if bp->bnapi is NULL before disabling and synchronizing IRQs.Show less

In the Linux kernel, the following vulnerability has been resolved: IB/isert: Reject login PDUs shorter than ISER_HEADERS_LEN In drivers/infiniband/ulp/isert/ib_isert.c, isert_login_recv_done() computes the login request payload length as wc->byte_len minus ISER_HEADERS_LEN with no lower bound, and login_req_len is a signed int. A remote iSER initiator can post a login Send work request carrying fewer than ISER_HEADERS_LEN (76) bytes, so the subtraction underflows and login_req_len becomes negative. isert_rx_login_req() then reads that negative length back into a signed int, takes size = min(rx_buflen, MAX_KEY_VALUE_PAIRS), and because the min() is signed it keeps the negative value; the value is then passed as the memcpy() length and sign-extended to a multi-gigabyte size_t. The copy into the 8192-byte login->req_buf runs far out of bounds and faults, crashing the target node. The login phase precedes iSCSI authentication, so no credentials are required to reach this path. Reject any login PDU shorter than ISER_HEADERS_LEN before the subtraction, mirroring the existing early return on a failed work completion, so login_req_len can never go negative. The upper bound was already safe: a posted login buffer cannot deliver more than ISER_RX_PAYLOAD_SIZE, so the difference stays at or below MAX_KEY_VALUE_PAIRS and the existing min() clamps it; only the missing lower bound needs to be added.Show less

In the Linux kernel, the following vulnerability has been resolved: inet: frags: fix use-after-free caused by the fqdir_pre_exit() flush On netns teardown, fqdir_pre_exit() walks the fqdir rhashtable and flushes every fragment queue that is not yet complete using inet_frag_queue_flush(). That helper frees all the skbs queued on the fragment queue but does not set INET_FRAG_COMPLETE, and leaves q->fragments_tail and q->last_run_head pointing at the freed skbs. The queue itself stays in the rhashtable. fqdir_pre_exit() first lowers high_thresh to 0 to stop new queue lookups, but it cannot stop a fragment that already obtained the queue through inet_frag_find() earlier and stalled just before taking the queue lock. Once that fragment resumes after the flush and takes the queue lock, it passes the INET_FRAG_COMPLETE check and then dereferences the freed fragments_tail. inet_frag_queue_insert() reads FRAG_CB() and ->len of that pointer and, on the append path, writes ->next_frag, causing a slab use-after-free. IPv6, nf_conntrack_reasm6 and 6lowpan reassembly share the same flush path and are affected as well. Reset rb_fragments, fragments_tail and last_run_head in inet_frag_queue_flush() so a flushed queue no longer points at the freed skbs. A fragment that resumes after the flush and takes the queue lock then finds an empty queue and starts a new run instead of dereferencing the freed fragments_tail. ip_frag_reinit() already performed this reset after its own flush, so drop the now duplicate code there.Show less

In the Linux kernel, the following vulnerability has been resolved: ovl: keep err zero after successful ovl_cache_get() ovl_iterate_merged() stores PTR_ERR(cache) in err before checking IS_ERR(cache). On success err holds the truncated cache pointer and can be returned as a bogus non-zero error. The syzbot reproducer reaches this through overlay-on-overlay readdir: getdents64 iterate_dir(outer overlay file) ovl_iterate_merged() ovl_cache_get() ovl_dir_read_merged() ovl_dir_read() iterate_dir(inner overlay file) ovl_iterate_merged() Only compute PTR_ERR(cache) on the error path.Show less

In the Linux kernel, the following vulnerability has been resolved: accel/ethosu: fix OOB write in ethosu_gem_cmdstream_copy_and_validate() The command stream parsing loop increments the index variable a second time when a 64-bit command word is encountered (bit 14 set), but does not re-check the loop bound before writing the second word: for (i = 0; i < size / 4; i++) { bocmds[i] = cmds[0]; if (cmd & 0x4000) { i++; bocmds[i] = cmds[1]; /* unchecked */ } } The buffer bocmds is backed by a DMA allocation of exactly size bytes from drm_gem_dma_create(ddev, size), giving valid indices [0, size/4-1]. When i == size/4 - 1 on entry to an iteration and bit 14 of cmds[0] is set, bocmds[size/4-1] is written in bounds, i is then incremented to size/4, and bocmds[size/4] writes four bytes past the end of the allocation. Userspace controls both the buffer contents and the size argument via the ioctl, making this a userspace-triggerable heap out-of-bounds write. Fix by checking the incremented index against the buffer bound before the second write and returning -EINVAL if the buffer is too small to contain the extended command.Show less

In the Linux kernel, the following vulnerability has been resolved: accel/ethosu: fix IFM region index out-of-bounds in command stream parser NPU_SET_IFM_REGION extracts the region index with param & 0x7f, giving a maximum value of 127. However region_size[] and output_region[] in struct ethosu_validated_cmdstream_info are both sized to NPU_BASEP_REGION_MAX (8), giving valid indices [0..7]. Every other region assignment in the same switch uses param & 0x7: NPU_SET_OFM_REGION: st.ofm.region = param & 0x7; NPU_SET_IFM2_REGION: st.ifm2.region = param & 0x7; NPU_SET_WEIGHT_REGION: st.weight[0].region = param & 0x7; NPU_SET_SCALE_REGION: st.scale[0].region = param & 0x7; The 0x7f mask on IFM is inconsistent and appears to be a typo. feat_matrix_length() and calc_sizes() use the region index directly as an array subscript into the kzalloc'd info struct: info->region_size[fm->region] = max(...); A userspace caller supplying NPU_SET_IFM_REGION with param > 7 causes a write up to 127*8 = 1016 bytes past the start of region_size[], corrupting adjacent kernel heap data. Fix by applying the same & 0x7 mask used by all other region assignments.Show less

In the Linux kernel, the following vulnerability has been resolved: accel/ethosu: fix arithmetic issues in dma_length() dma_length() derives DMA region usage from command stream values and updates region_size[]: len = ((len + stride[0]) * size0 + stride[1]) * size1 region_size[region] = max(..., len + dma->offset) Several arithmetic issues can corrupt the derived region size: - signed stride values may underflow when added to len - intermediate multiplications may overflow - len + dma->offset may overflow during region_size updates - dma_length() error returns were not validated by the caller region_size[] is later used by ethosu_job.c to validate command stream accesses against GEM buffer sizes. Arithmetic wraparound can therefore under-report region usage and bypass the bounds validation. Fix by validating signed additions, using overflow helpers for multiplications and offset updates, and propagating dma_length() failures to the caller.Show less

In the Linux kernel, the following vulnerability has been resolved: accel/ethosu: reject DMA commands with uninitialized length cmd_state_init() initializes the command state with memset(0xff), leaving dma->len at U64_MAX to signal missing setup. The only setter is NPU_SET_DMA0_LEN; if userspace omits this command and issues NPU_OP_DMA_START, dma->len remains U64_MAX. In dma_length(), a positive stride added to U64_MAX wraps to a small value. With size0 == 1, check_mul_overflow() does not trigger and dma_length() returns 0 instead of U64_MAX. The caller's U64_MAX check then passes, region_size[] stays 0, and the bounds check in ethosu_job.c is bypassed, allowing hardware to execute DMA with stale physical addresses. Fix by checking for U64_MAX at the start of dma_length() before any arithmetic, consistent with the sentinel value used throughout the driver to detect uninitialized fields.Show less

In the Linux kernel, the following vulnerability has been resolved: accel/ethosu: reject NPU_OP_RESIZE commands from userspace NPU_OP_RESIZE is a U85-only command that the driver does not yet implement. The existing WARN_ON(1) placeholder fires unconditionally whenever userspace submits this command via DRM_IOCTL_ETHOSU_GEM_CREATE, causing unbounded kernel log spam. If panic_on_warn is set the kernel panics, giving any unprivileged user with access to the DRM device a trivial denial-of-service primitive. Replace the WARN_ON(1) with an explicit -EINVAL return so the ioctl rejects the command before it reaches hardware.Show less

In the Linux kernel, the following vulnerability has been resolved: fuse: reject fuse_notify() pagecache ops on directories The operations FUSE_NOTIFY_STORE and FUSE_NOTIFY_RETRIEVE allow the FUSE daemon to actively write/read pagecache contents. For directories with FOPEN_CACHE_DIR, the pagecache is used as kernel-internal cache storage, and userspace is not supposed to have direct access to this cache - in particular, fuse_parse_cache() will hit WARN_ON() if the cache contains bogus data. Reject FUSE_NOTIFY_STORE and FUSE_NOTIFY_RETRIEVE on anything other than regular files with -EINVAL.Show less

In the Linux kernel, the following vulnerability has been resolved: fuse: limit FUSE_NOTIFY_RETRIEVE to uptodate folios FUSE_NOTIFY_RETRIEVE must be limited to uptodate folios; !uptodate folios can contain uninitialized data. Since FUSE_NOTIFY_RETRIEVE is intended to only return data that is already in the page cache and not wait for data from the FUSE daemon, treat !uptodate folios as if they weren't present. This only has security impact on systems that don't enable automatic zero-initialization of all page allocations via CONFIG_INIT_ON_ALLOC_DEFAULT_ON or init_on_alloc=1.Show less

In the Linux kernel, the following vulnerability has been resolved: iomap: avoid potential null folio->mapping deref during error reporting When a buffered read fails, iomap_finish_folio_read() reports the error with fserror_report_io(folio->mapping->host, ...). This is called after ifs->read_bytes_pending has been decremented by the bytes attempted to be read. For a folio split across multiple read completions, the folio is only guaranteed to stay locked while read_bytes_pending > 0. Once iomap_finish_folio_read() decrements read_bytes_pending, another in-flight read can complete and end the read on the folio, which unlocks it. This allows truncate logic to run and detach the folio (set folio->mapping to NULL). The error reporting path then can dereference a NULL folio->mapping. As reported by Sam Sun, this is the race that can occur: CPU0: failed completion CPU1: final completion CPU2: truncate ----------------------- ---------------------- -------------- read_bytes_pending -= len finished = false /* preempted before fserror_report_io() */ read_bytes_pending -= len finished = true folio_end_read() truncate clears folio->mapping fserror_report_io( folio->mapping->host, ...) ^ NULL deref Fix this by reporting the error first before decrementing ifs->read_bytes_pending.Show less

In the Linux kernel, the following vulnerability has been resolved: iommu/dma: Do not try to iommu_map a 0 length region in swiotlb iommu_dma_iova_link_swiotlb() processes a mapping that is unaligned in three parts, the head, middle and trailer. If the middle is empty because there are no aligned pages it will call down to iommu_map() with a 0 size which the iommupt implementation will fail as illegal. It then tries to do an error unwind and starts from the wrong spot corrupting the mapping so the eventual destruction triggers a WARN_ON. Check for 0 length and avoid mapping and use offset not 0 as the starting point to unlink. This is frequently triggered by using some kinds of thunderbolt NVMe drives that trigger forced SWIOTLB for unaligned memory. NVMe seems to pass in oddly aligned buffers for the passthrough commands from smartctl that hit this condition.Show less

In the Linux kernel, the following vulnerability has been resolved: locking/rtmutex: Skip remove_waiter() when waiter is not enqueued syzbot triggered the following splat in remove_waiter() via FUTEX_CMP_REQUEUE_PI: KASAN: null-ptr-deref in range [0x0000000000000a88-0x0000000000000a8f] class_raw_spinlock_constructor remove_waiter+0x159/0x1200 kernel/locking/rtmutex.c:1561 rt_mutex_start_proxy_lock+0x103/0x120 futex_requeue+0x10e4/0x20d0 __x64_sys_futex+0x34f/0x4d0 task_blocks_on_rt_mutex() does not arm the waiter upon deadlock detection, leaving waiter->task nil, where 3bfdc63936dd ("rtmutex: Use waiter::task instead of current in remove_waiter()") made this fatal. Furthermore, rt_mutex_start_proxy_lock() should not be calling into remove_waiter() upon a successfully grabbing the rtmutex. 1a1fb985f2e2 ("futex: Handle early deadlock return correctly"), moved the remove_waiter() out of __rt_mutex_start_proxy_lock() (where 'ret' was only ever 0 or < 0) into the wrapper. Tighten this check to account for try_to_take_rt_mutex().Show less

In the Linux kernel, the following vulnerability has been resolved: memcg: use round-robin victim selection in refill_stock Harry Yoo reported that get_random_u32_below() is not safe to call in the nmi context and memcg charge draining can happen in nmi context. More specifically get_random_u32_below() is neither reentrant- nor NMI-safe: it acquires a per-cpu local_lock via local_lock_irqsave() on the batched_entropy_u32 state. An NMI that lands on a CPU mid-update of the ChaCha batch state and recurses into the random subsystem would corrupt that state. The memcg_stock local_trylock prevents re-entry on the percpu stock itself, but cannot protect an unrelated subsystem's per-cpu lock. Replace the random pick with a per-cpu round-robin counter stored in memcg_stock_pcp and serialized by the same local_trylock that already guards cached[] and nr_pages[]. No atomics, no random calls, no extra locks needed.Show less