Linux

In the Linux kernel, the following vulnerability has been resolved: netlabel: validate unlabeled address and mask attribute lengths netlbl_unlabel_addrinfo_get() used the address attribute length to determine whether the attribute data could be read as an IPv4 or IPv6 address, but did not independently validate the corresponding mask attribute length. A crafted Generic Netlink request could therefore provide a valid IPv4/IPv6 address attribute with a shorter mask attribute, which would later be read as a full struct in_addr or struct in6_addr. NLA_BINARY policy lengths are maximum lengths by default, so use NLA_POLICY_EXACT_LEN() for the unlabeled IPv4/IPv6 address and mask attributes. This rejects short attributes during policy validation and also exposes the exact length requirements through policy introspection.Show less

In the Linux kernel, the following vulnerability has been resolved: gpio: mvebu: fix NULL pointer dereference in suspend/resume mvebu_pwm_suspend() and mvebu_pwm_resume() are called for all GPIO banks during suspend/resume, but not all banks have PWM functionality. GPIO banks without PWM have mvchip->mvpwm set to NULL. Calling mvebu_pwm_suspend() with mvpwm == NULL causes a NULL pointer dereference when it tries to access mvpwm->blink_select. Unable to handle kernel NULL pointer dereference at virtual address 00000020 when write [00000020] *pgd=00000000 Internal error: Oops: 815 [#1] PREEMPT ARM Modules linked in: CPU: 0 UID: 0 PID: 406 Comm: sh Not tainted 6.12.74-rt12-yocto-standard-g4e96f98fb7db-dirty #353 Hardware name: Marvell Armada 370/XP (Device Tree) PC is at regmap_mmio_read+0x38/0x54 LR is at regmap_mmio_read+0x38/0x54 pc : [<c05fd2ac>] lr : [<c05fd2ac>] psr: 200f0013 sp : f0c11d10 ip : 00000000 fp : c100d2f0 r10: c14fb854 r9 : 00000000 r8 : 00000000 r7 : c1799c00 r6 : 00000020 r5 : 00000020 r4 : c179c7c0 r3 : f0a231a0 r2 : 00000020 r1 : 00000020 r0 : 00000000 Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none Control: 10c5387d Table: 135ec059 DAC: 00000051 Call trace: regmap_mmio_read from _regmap_bus_reg_read+0x78/0xac _regmap_bus_reg_read from _regmap_read+0x60/0x154 _regmap_read from regmap_read+0x3c/0x60 regmap_read from mvebu_gpio_suspend+0xa4/0x14c mvebu_gpio_suspend from dpm_run_callback+0x54/0x180 dpm_run_callback from device_suspend+0x124/0x630 device_suspend from dpm_suspend+0x124/0x270 dpm_suspend from dpm_suspend_start+0x64/0x6c dpm_suspend_start from suspend_devices_and_enter+0x140/0x8e8 suspend_devices_and_enter from pm_suspend+0x2fc/0x308 pm_suspend from state_store+0x6c/0xc8 state_store from kernfs_fop_write_iter+0x10c/0x1f8 kernfs_fop_write_iter from vfs_write+0x270/0x468 vfs_write from ksys_write+0x70/0xf0 ksys_write from ret_fast_syscall+0x0/0x54 Add a NULL check for mvchip->mvpwm before calling the PWM suspend/resume functions.Show less

In the Linux kernel, the following vulnerability has been resolved: tcp: restrict SO_ATTACH_FILTER to priv users This patch restricts the use of SO_ATTACH_FILTER (cBPF) on TCP sockets to users with CAP_NET_ADMIN capability. This blocks potential side-channel attack where an unprivileged application attaches a filter to leak TCP sequence/acknowledgment numbers.Show less

In the Linux kernel, the following vulnerability has been resolved: net: add pskb_may_pull() to skb_gro_receive_list() skb_gro_receive_list() calls skb_pull(skb, skb_gro_offset(skb)) without first ensuring the data is in the linear area via pskb_may_pull(). When the skb arrives via napi_gro_frags(), skb_headlen can be 0 (all data in page fragments) while skb_gro_offset is non-zero (after IP+TCP header parsing). The skb_pull() then decrements skb->len by skb_gro_offset but skb->data_len stays unchanged, hitting BUG_ON(skb->len < skb->data_len) in __skb_pull(). The UDP fraglist GRO path already contains this guard at udp_offload.c:749. Adding it to skb_gro_receive_list() itself provides centralized protection for all callers (TCP, UDP, and any future protocols), and ensures the precondition of skb_pull() is satisfied before it is called. On pskb_may_pull() failure, set NAPI_GRO_CB(skb)->flush = 1 so the skb is not held as a new GRO head and is instead delivered through the normal receive path, matching the UDP handling.Show less

In the Linux kernel, the following vulnerability has been resolved: net: ibm: emac: Fix use-after-free during device removal The driver was using devm_register_netdev() which causes unregister_netdev() to be deferred until the devres cleanup phase, which runs after emac_remove() returns. This creates a use-after-free window where: 1. emac_remove() is called, which tears down hardware (cancels work, detaches modules, unregisters from MAL) 2. emac_remove() returns 3. devres cleanup runs and finally calls unregister_netdev() During step 3, the network stack might still process packets, triggering emac_irq(), emac_poll(), or other handlers that access now-freed hardware resources (dev->emacp, dev->mal, etc.). Fix this by replacing devm_register_netdev() with manual register_netdev() and calling unregister_netdev() at the beginning of emac_remove(), before any hardware teardown. This ensures the network device is fully stopped and unregistered before hardware resources are released. The change is safe because: - dev->ndev is assigned very early in probe (before any error paths that could bypass emac_remove) - platform_set_drvdata() is only called after successful registration, so emac_remove() only runs for fully registered devices - unregister_netdev() is idempotent and safe to call on any registered deviceShow less

In the Linux kernel, the following vulnerability has been resolved: netdev: fix double-free in netdev_nl_bind_rx_doit() Sashiko flags that genlmsg_reply() always consumes the skb. The error path calls nlmsg_free(rsp) so we can't jump directly to it. Let's not unbind, just propagate the error to the user. This is the typical way of handling genlmsg_reply() failures. They shouldn't happen unless user does something silly like calling the kernel with an already-full rcvbuf.Show less

In the Linux kernel, the following vulnerability has been resolved: net: phy: clean the sfp upstream if phy probing fails Sashiko reported that we don't call sfp_bus_del_upstream() in the probe failure path, so let's add it, otherwise the sfp-bus is left with a dangling 'upstream' field, that may be used later on during SFP events. This issue existed before the generic phylib sfp support, back when drivers were calling phy_sfp_probe themselves.Show less

In the Linux kernel, the following vulnerability has been resolved: net: phy: don't try to setup PHY-driven SFP cages when using genphy We don't have support for PHY-driver SFP cages with the genphy code. On top of that, it was found by sashiko that running sfp_bus_add_upstream() for genphy deadlocks, as for genphy the PHY probing runs under RTNL, which isn't the case for non-genphy drivers. This problem was reproduced, and does lead to a deadlock on RTNL. Before the blamed commit, the phy_sfp_probe() call was made by individual PHY drivers, so there was no way to get to the SFP probing path when using genphy. Let's therefore only run phy_sfp_probe when not using genphy.Show less

In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Fix slab-out-of-bounds in mlx5_query_nic_vport_mac_list mlx5_query_nic_vport_mac_list() sizes its firmware command buffer using the PF's log_max_current_uc/mc_list capabilities. When querying a VF vport with a larger configured max (via devlink), the firmware response can overflow this buffer: BUG: KASAN: slab-out-of-bounds in mlx5_query_nic_vport_mac_list+0x453/0x4c0 [mlx5_core] Read of size 4 at addr ff1100013ffc8a12 by task kworker/u96:2/385 CPU: 12 UID: 0 PID: 385 Comm: kworker/u96:2 Not tainted 7.0.0-rc6+ #1 PREEMPT Hardware name: QEMU Standard PC (Q35 + ICH9, 2009) Workqueue: mlx5_esw_wq esw_vport_change_handler [mlx5_core] Call Trace: <TASK> dump_stack_lvl+0x69/0xa0 print_report+0x176/0x4e4 kasan_report+0xc8/0x100 mlx5_query_nic_vport_mac_list+0x453/0x4c0 [mlx5_core] esw_update_vport_addr_list+0x2e3/0xda0 [mlx5_core] esw_vport_change_handle_locked+0xa1f/0x1060 [mlx5_core] esw_vport_change_handler+0x6a/0x90 [mlx5_core] process_one_work+0x87f/0x15e0 worker_thread+0x62b/0x1020 kthread+0x375/0x490 ret_from_fork+0x4dc/0x810 ret_from_fork_asm+0x11/0x20 </TASK> Fix by querying the vport's own HCA caps to size the buffer correctly. Refactor the function to allocate and return the MAC list internally, removing the caller's dependency on knowing the correct max.Show less

In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: xsk: Fix DMA and xdp_frame leak on XDP_TX xmit failure In the XSK branch of mlx5e_xmit_xdp_buff(), when sq->xmit_xdp_frame() returns false (e.g. XDPSQ is full), the function returns without unmapping the DMA address or freeing the xdp_frame allocated by xdp_convert_zc_to_xdp_frame(). The xdpi_fifo push only happens on success, so the completion path cannot recover these entries. With CONFIG_DMA_API_DEBUG=y, the leak surfaces on driver unbind: DMA-API: pci 0000:08:00.0: device driver has pending DMA allocations while released from device [count=1116] One of leaked entries details: [device address=0x000000010ffd7028] [size=1534 bytes] [mapped with DMA_TO_DEVICE] [mapped as phy] WARNING: kernel/dma/debug.c:881 at dma_debug_device_change+0x127/0x180 ... DMA-API: Mapped at: debug_dma_map_phys+0x4b/0xd0 dma_map_phys+0xfd/0x2d0 mlx5e_xdp_handle+0x5ae/0xac0 [mlx5_core] mlx5e_xsk_skb_from_cqe_mpwrq_linear+0xc4/0x170 [mlx5_core] mlx5e_handle_rx_cqe_mpwrq+0xc1/0x290 [mlx5_core] Add the missing unmap + xdp_return_frame, matching the cleanup already done in mlx5e_xdp_xmit(). has_frags is rejected earlier in this branch, so no per-frag unmap is needed.Show less

In the Linux kernel, the following vulnerability has been resolved: ipv6: sit: reload inner IPv6 header after GSO offloads ipip6_tunnel_xmit() caches the inner IPv6 header pointer at function entry and continues using it after iptunnel_handle_offloads(). For GSO skbs, iptunnel_handle_offloads() calls skb_header_unclone(). When the skb header is cloned, skb_header_unclone() can call pskb_expand_head(), which may move the skb head. The pskb_expand_head() contract requires pointers into the skb header to be reloaded after the call. If the later skb_realloc_headroom() branch is not taken, SIT uses the stale iph6 pointer to read the inner hop limit and DS field. That can read from a freed skb head after the old head's remaining clone is released. Reload iph6 after the offload helper succeeds and before subsequent reads from the inner IPv6 header. Keep the existing reload after skb_realloc_headroom(), since that branch can also replace the skb.Show less

In the Linux kernel, the following vulnerability has been resolved: net: openvswitch: fix possible kfree_skb of ERR_PTR After the patch in the "Fixes" tag, the allocation of the "reply" skb can happen either before or after locking the ovs_mutex. However, error cleanups still follow the classical reversed order, assuming "reply" is allocated before locking: it is freed after unlocking. If "reply" allocation happens after locking the mutex and it fails, "reply" is left with an ERR_PTR, and execution jumps to the correspondent cleanup stage which will try to free an invalid pointer. Fix this by setting the pointer to NULL after having saved its error value.Show less

In the Linux kernel, the following vulnerability has been resolved: gpio: rockchip: fix generic IRQ chip leak on remove The driver allocates domain generic chips using irq_alloc_domain_generic_chips() during probe. However, on driver remove/teardown, the generic chips are not automatically freed when the IRQ domain is removed because the domain flags do not include IRQ_DOMAIN_FLAG_DESTROY_GC. This causes both the domain generic chips structure and the associated generic chips to be leaked. Additionally, the generic chips remain on the global gc_list and may later be visited by generic IRQ chip suspend, resume, or shutdown callbacks after the GPIO bank has been removed, potentially resulting in a use-after-free and kernel crash. Fix the resource leak by explicitly calling irq_domain_remove_generic_chips() before removing the IRQ domain in rockchip_gpio_remove().Show less

In the Linux kernel, the following vulnerability has been resolved: sctp: fix uninit-value in __sctp_rcv_asconf_lookup() __sctp_rcv_asconf_lookup() in net/sctp/input.c only checks that the ASCONF chunk can hold the ADDIP header and a parameter header, then calls af->from_addr_param(), which reads the full address (16 bytes for IPv6) trusting the parameter's declared length. An unauthenticated peer can send a truncated trailing ASCONF chunk that declares an IPv6 address parameter but stops after the 4-byte parameter header; reached from the no-association lookup path, from_addr_param() then reads uninitialized bytes past the parameter. Impact: an unauthenticated SCTP peer makes the receive path read up to 16 bytes of uninitialized memory past a truncated ASCONF address parameter. The sibling __sctp_rcv_init_lookup() bounds parameters with sctp_walk_params(); this path open-codes the fetch and omits the bound. Verify the whole address parameter lies within the chunk before from_addr_param() reads it, the same class of fix as commit 51e5ad549c43 ("net: sctp: fix KMSAN uninit-value in sctp_inq_pop").Show less

In the Linux kernel, the following vulnerability has been resolved: sctp: validate embedded INIT chunk and address list lengths in cookie sctp_unpack_cookie() only checked that the embedded INIT chunk length did not exceed the remaining cookie payload, but did not ensure that the INIT chunk is large enough to contain a complete INIT header. A malformed COOKIE_ECHO can therefore carry a truncated INIT chunk whose length field is smaller than sizeof(struct sctp_init_chunk). Later, sctp_process_init() accesses INIT parameters unconditionally, which may lead to out-of-bounds reads. In addition, raw_addr_list_len is not fully validated against the remaining cookie payload. When cookie authentication is disabled, an attacker can supply an oversized raw_addr_list_len and cause sctp_raw_to_bind_addrs() to read beyond the end of the cookie. The address parser also lacks sufficient bounds checks for parameter headers and lengths, allowing malformed address parameters to trigger out-of-bounds reads. Fix this by: - requiring the embedded INIT chunk length to be at least sizeof(struct sctp_init_chunk); - validating that the INIT chunk and raw address list together fit within the cookie payload; - verifying sufficient data exists for each address parameter header and payload before parsing it. Note that sctp_verify_init() must be called after sctp_unpack_cookie() and before sctp_process_init() when cookie authentication is disabled. This will be addressed in a separate patch.Show less

In the Linux kernel, the following vulnerability has been resolved: net: guard timestamp cmsgs to real error queue skbs skb_is_err_queue() treats PACKET_OUTGOING as the sole marker for an skb from sk_error_queue. That assumption is not true for AF_PACKET sockets: outgoing packet taps are also delivered to packet sockets with skb->pkt_type == PACKET_OUTGOING, but their skb->cb is owned by AF_PACKET instead of struct sock_exterr_skb. If such an skb is received with timestamping enabled, the generic timestamp cmsg path can read AF_PACKET control-buffer state as sock_exterr_skb::opt_stats. With SO_RXQ_OVFL enabled, the packet drop counter overlaps opt_stats. An odd drop count makes the path emit SCM_TIMESTAMPING_OPT_STATS with skb->len and skb->data. For non-linear skbs this copies past the linear head and can trigger hardened usercopy or disclose adjacent heap contents. Keep skb_is_err_queue() local to net/socket.c, but make it verify that the PACKET_OUTGOING marker is paired with the sock_rmem_free destructor installed by sock_queue_err_skb(). AF_PACKET receive skbs use normal receive ownership and no longer pass as error-queue skbs, while legitimate sk_error_queue entries keep the PACKET_OUTGOING marker and sock_rmem_free ownership.Show less

In the Linux kernel, the following vulnerability has been resolved: ptp: ocp: fix resource freeing order Commit a60fc3294a37 ("ptp: rework ptp_clock_unregister() to disable events") added a call to ptp_disable_all_events() which changes the configuration of pins if they support EXTTS events. In ptp_ocp_detach() pins resources are freed before ptp_clock_unregister() and it leads to use-after-free during driver removal. Fix it by changing the order of free/unregister calls. To avoid irq handler running on the other core while ptp device unregistering, call synchronize_irq() after HW is configured to stop producing irqs and no irqs are in-flight.Show less

In the Linux kernel, the following vulnerability has been resolved: ip6_vti: fix incorrect tunnel matching in vti6_tnl_lookup() In vti6_tnl_lookup(), when an exact match for a tunnel fails, the code falls back to searching for wildcard tunnels: - Tunnels matching the packet's local address, with any remote address wildcard remote). - Tunnels matching the packet's remote address, with any local address (wildcard local). However, vti6 stores all these different types of tunnels in the same hash table (ip6n->tnls_r_l) prone to hash collisions. The bug is that the fallback search loops in vti6_tnl_lookup() were missing checks to ensure that the candidate tunnel actually has a wildcard address.Show less

In the Linux kernel, the following vulnerability has been resolved: netfilter: revalidate bridge ports ebt_redirect_tg() dereferences br_port_get_rcu() return without a NULL check, causing a kernel panic when the bridge port has been removed between the original hook invocation and an NFQUEUE reinject. A mere NULL check isn't sufficient, however. As sashiko review points out userspace can not only remove the port from the bridge, it could also place the device in a different virtual device, e.g. macvlan. If this happens, we must drop the packet, there is no way for us to reinject it into the bridge path. Switch to _upper API, we don't need the bridge port structure. Also, this fix keeps another bug intact: Both nfnetlink_log and nfnetlink_queue use CONFIG_BRIDGE_NETFILTER too aggressive, which prevents certain logging features when queueing in bridge family: NETFILTER_FAMILY_BRIDGE can be enabled while the old CONFIG_BRIDGE_NETFILTER cruft is off. Fixes tag is a common ancestor, this was always broken.Show less

In the Linux kernel, the following vulnerability has been resolved: netfilter: x_tables: avoid leaking percpu counter pointers The native and compat get-entries paths copy the fixed rule entry header from the kernelized rule blob to userspace before overwriting the entry's counter fields with a sanitized counter snapshot. On SMP kernels, entry->counters.pcnt contains the percpu allocation address used by x_tables rule counters. A caller can provide a userspace buffer that faults during the initial fixed-header copy after pcnt has been copied but before the later sanitized counter copy runs. The syscall then returns -EFAULT while leaving the raw percpu pointer in userspace. Copy only the fixed entry prefix before counters from the kernelized rule blob, then copy the sanitized counter snapshot into the counter field. Apply this ordering to the IPv4, IPv6, and ARP native and compat get-entries implementations so a fault cannot expose the internal percpu counter pointer.Show less