Linux

In the Linux kernel, the following vulnerability has been resolved: s390/pci: Fix duplicate pci_dev_put() in disable_slot() when PF has child VFs With commit bcb5d6c76903 ("s390/pci: introduce lock to synchronize state of zpci_dev's") the code to ignore power off of a PF that has child VFs was changed from a direct return to a goto to the unlock and pci_dev_put() section. The change however left the existing pci_dev_put() untouched resulting in a doubple put. This can subsequently cause a use after free if the struct pci_dev is released in an unexpected state. Fix this by removing the extra pci_dev_put().Show less

In the Linux kernel, the following vulnerability has been resolved: net: phy: allow MDIO bus PM ops to start/stop state machine for phylink-controlled PHY DSA has 2 kinds of drivers: 1. Those who call dsa_switch_suspend() and dsa_switch_resume() from their device PM ops: qca8k-8xxx, bcm_sf2, microchip ksz 2. Those who don't: all others. The above methods should be optional. For type 1, dsa_switch_suspend() calls dsa_user_suspend() -> phylink_stop(), and dsa_switch_resume() calls dsa_user_resume() -> phylink_start(). These seem good candidates for setting mac_managed_pm = true because that is essentially its definition [1], but that does not seem to be the biggest problem for now, and is not what this change focuses on. Talking strictly about the 2nd category of DSA drivers here (which do not have MAC managed PM, meaning that for their attached PHYs, mdio_bus_phy_suspend() and mdio_bus_phy_resume() should run in full), I have noticed that the following warning from mdio_bus_phy_resume() is triggered: WARN_ON(phydev->state != PHY_HALTED && phydev->state != PHY_READY && phydev->state != PHY_UP); because the PHY state machine is running. It's running as a result of a previous dsa_user_open() -> ... -> phylink_start() -> phy_start() having been initiated by the user. The previous mdio_bus_phy_suspend() was supposed to have called phy_stop_machine(), but it didn't. So this is why the PHY is in state PHY_NOLINK by the time mdio_bus_phy_resume() runs. mdio_bus_phy_suspend() did not call phy_stop_machine() because for phylink, the phydev->adjust_link function pointer is NULL. This seems a technicality introduced by commit fddd91016d16 ("phylib: fix PAL state machine restart on resume"). That commit was written before phylink existed, and was intended to avoid crashing with consumer drivers which don't use the PHY state machine - phylink always does, when using a PHY. But phylink itself has historically not been developed with suspend/resume in mind, and apparently not tested too much in that scenario, allowing this bug to exist unnoticed for so long. Plus, prior to the WARN_ON(), it would have likely been invisible. This issue is not in fact restricted to type 2 DSA drivers (according to the above ad-hoc classification), but can be extrapolated to any MAC driver with phylink and MDIO-bus-managed PHY PM ops. DSA is just where the issue was reported. Assuming mac_managed_pm is set correctly, a quick search indicates the following other drivers might be affected: $ grep -Zlr PHYLINK_NETDEV drivers/ | xargs -0 grep -L mac_managed_pm drivers/net/ethernet/atheros/ag71xx.c drivers/net/ethernet/microchip/sparx5/sparx5_main.c drivers/net/ethernet/microchip/lan966x/lan966x_main.c drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c drivers/net/ethernet/freescale/fs_enet/fs_enet-main.c drivers/net/ethernet/freescale/dpaa/dpaa_eth.c drivers/net/ethernet/freescale/ucc_geth.c drivers/net/ethernet/freescale/enetc/enetc_pf_common.c drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c drivers/net/ethernet/marvell/mvneta.c drivers/net/ethernet/marvell/prestera/prestera_main.c drivers/net/ethernet/mediatek/mtk_eth_soc.c drivers/net/ethernet/altera/altera_tse_main.c drivers/net/ethernet/wangxun/txgbe/txgbe_phy.c drivers/net/ethernet/meta/fbnic/fbnic_phylink.c drivers/net/ethernet/tehuti/tn40_phy.c drivers/net/ethernet/mscc/ocelot_net.c Make the existing conditions dependent on the PHY device having a phydev->phy_link_change() implementation equal to the default phy_link_change() provided by phylib. Otherwise, we implicitly know that the phydev has the phylink-provided phylink_phy_change() callback, and when phylink is used, the PHY state machine always needs to be stopped/ started on the suspend/resume path. The code is structured as such that if phydev->phy_link_change() is absent, it is a matter of time until the kernel will crash - no need to further complicate the test. Thus, for the situation where the PM is not managed b ---truncated---Show less

In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: Fix invalid entry fetch in ath12k_dp_mon_srng_process Currently, ath12k_dp_mon_srng_process uses ath12k_hal_srng_src_get_next_entry to fetch the next entry from the destination ring. This is incorrect because ath12k_hal_srng_src_get_next_entry is intended for source rings, not destination rings. This leads to invalid entry fetches, causing potential data corruption or crashes due to accessing incorrect memory locations. This happens because the source ring and destination ring have different handling mechanisms and using the wrong function results in incorrect pointer arithmetic and ring management. To fix this issue, replace the call to ath12k_hal_srng_src_get_next_entry with ath12k_hal_srng_dst_get_next_entry in ath12k_dp_mon_srng_process. This ensures that the correct function is used for fetching entries from the destination ring, preventing invalid memory accesses. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3Show less

In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: Fix invalid data access in ath12k_dp_rx_h_undecap_nwifi In certain cases, hardware might provide packets with a length greater than the maximum native Wi-Fi header length. This can lead to accessing and modifying fields in the header within the ath12k_dp_rx_h_undecap_nwifi function for DP_RX_DECAP_TYPE_NATIVE_WIFI decap type and potentially resulting in invalid data access and memory corruption. Add a sanity check before processing the SKB to prevent invalid data access in the undecap native Wi-Fi function for the DP_RX_DECAP_TYPE_NATIVE_WIFI decap type. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1Show less

In the Linux kernel, the following vulnerability has been resolved: ASoC: codecs: wcd937x: fix a potential memory leak in wcd937x_soc_codec_probe() When snd_soc_dapm_new_controls() or snd_soc_dapm_add_routes() fails, wcd937x_soc_codec_probe() returns without releasing 'wcd937x->clsh_info', which is allocated by wcd_clsh_ctrl_alloc. Add wcd_clsh_ctrl_free() to prevent potential memory leak.Show less

In the Linux kernel, the following vulnerability has been resolved: ftrace: Add cond_resched() to ftrace_graph_set_hash() When the kernel contains a large number of functions that can be traced, the loop in ftrace_graph_set_hash() may take a lot of time to execute. This may trigger the softlockup watchdog. Add cond_resched() within the loop to allow the kernel to remain responsive even when processing a large number of functions. This matches the cond_resched() that is used in other locations of the code that iterates over all functions that can be traced.Show less

In the Linux kernel, the following vulnerability has been resolved: libbpf: Fix accessing BTF.ext core_relo header Update btf_ext_parse_info() to ensure the core_relo header is present before reading its fields. This avoids a potential buffer read overflow reported by the OSS Fuzz project.Show less

In the Linux kernel, the following vulnerability has been resolved: tracing: Verify event formats that have "%*p.." The trace event verifier checks the formats of trace events to make sure that they do not point at memory that is not in the trace event itself or in data that will never be freed. If an event references data that was allocated when the event triggered and that same data is freed before the event is read, then the kernel can crash by reading freed memory. The verifier runs at boot up (or module load) and scans the print formats of the events and checks their arguments to make sure that dereferenced pointers are safe. If the format uses "%*p.." the verifier will ignore it, and that could be dangerous. Cover this case as well. Also add to the sample code a use case of "%*pbl".Show less

In the Linux kernel, the following vulnerability has been resolved: objtool, media: dib8000: Prevent divide-by-zero in dib8000_set_dds() If dib8000_set_dds()'s call to dib8000_read32() returns zero, the result is a divide-by-zero. Prevent that from happening. Fixes the following warning with an UBSAN kernel: drivers/media/dvb-frontends/dib8000.o: warning: objtool: dib8000_tune() falls through to next function dib8096p_cfg_DibRx()Show less

In the Linux kernel, the following vulnerability has been resolved: perf/x86/intel: KVM: Mask PEBS_ENABLE loaded for guest with vCPU's value. When generating the MSR_IA32_PEBS_ENABLE value that will be loaded on VM-Entry to a KVM guest, mask the value with the vCPU's desired PEBS_ENABLE value. Consulting only the host kernel's host vs. guest masks results in running the guest with PEBS enabled even when the guest doesn't want to use PEBS. Because KVM uses perf events to proxy the guest virtual PMU, simply looking at exclude_host can't differentiate between events created by host userspace, and events created by KVM on behalf of the guest. Running the guest with PEBS unexpectedly enabled typically manifests as crashes due to a near-infinite stream of #PFs. E.g. if the guest hasn't written MSR_IA32_DS_AREA, the CPU will hit page faults on address '0' when trying to record PEBS events. The issue is most easily reproduced by running `perf kvm top` from before commit 7b100989b4f6 ("perf evlist: Remove __evlist__add_default") (after which, `perf kvm top` effectively stopped using PEBS). The userspace side of perf creates a guest-only PEBS event, which intel_guest_get_msrs() misconstrues a guest-*owned* PEBS event. Arguably, this is a userspace bug, as enabling PEBS on guest-only events simply cannot work, and userspace can kill VMs in many other ways (there is no danger to the host). However, even if this is considered to be bad userspace behavior, there's zero downside to perf/KVM restricting PEBS to guest-owned events. Note, commit 854250329c02 ("KVM: x86/pmu: Disable guest PEBS temporarily in two rare situations") fixed the case where host userspace is profiling KVM *and* userspace, but missed the case where userspace is profiling only KVM.Show less

In the Linux kernel, the following vulnerability has been resolved: net: ethernet: mtk_eth_soc: fix SER panic with 4GB+ RAM If the mtk_poll_rx() function detects the MTK_RESETTING flag, it will jump to release_desc and refill the high word of the SDP on the 4GB RFB. Subsequently, mtk_rx_clean will process an incorrect SDP, leading to a panic. Add patch from MediaTek's SDK to resolve this.Show less

In the Linux kernel, the following vulnerability has been resolved: ASoC: simple-card-utils: Fix pointer check in graph_util_parse_link_direction Actually check if the passed pointers are valid, before writing to them. This also fixes a USBAN warning: UBSAN: invalid-load in ../sound/soc/fsl/imx-card.c:687:25 load of value 255 is not a valid value for type '_Bool' This is because playback_only is uninitialized and is not written to, as the playback-only property is absent.Show less

In the Linux kernel, the following vulnerability has been resolved: octeon_ep: Fix host hang issue during device reboot When the host loses heartbeat messages from the device, the driver calls the device-specific ndo_stop function, which frees the resources. If the driver is unloaded in this scenario, it calls ndo_stop again, attempting to free resources that have already been freed, leading to a host hang issue. To resolve this, dev_close should be called instead of the device-specific stop function.dev_close internally calls ndo_stop to stop the network interface and performs additional cleanup tasks. During the driver unload process, if the device is already down, ndo_stop is not called.Show less

In the Linux kernel, the following vulnerability has been resolved: sch_htb: make htb_qlen_notify() idempotent htb_qlen_notify() always deactivates the HTB class and in fact could trigger a warning if it is already deactivated. Therefore, it is not idempotent and not friendly to its callers, like fq_codel_dequeue(). Let's make it idempotent to ease qdisc_tree_reduce_backlog() callers' life.Show less

In the Linux kernel, the following vulnerability has been resolved: btrfs: adjust subpage bit start based on sectorsize When running machines with 64k page size and a 16k nodesize we started seeing tree log corruption in production. This turned out to be because we were not writing out dirty blocks sometimes, so this in fact affects all metadata writes. When writing out a subpage EB we scan the subpage bitmap for a dirty range. If the range isn't dirty we do bit_start++; to move onto the next bit. The problem is the bitmap is based on the number of sectors that an EB has. So in this case, we have a 64k pagesize, 16k nodesize, but a 4k sectorsize. This means our bitmap is 4 bits for every node. With a 64k page size we end up with 4 nodes per page. To make this easier this is how everything looks [0 16k 32k 48k ] logical address [0 4 8 12 ] radix tree offset [ 64k page ] folio [ 16k eb ][ 16k eb ][ 16k eb ][ 16k eb ] extent buffers [ | | | | | | | | | | | | | | | | ] bitmap Now we use all of our addressing based on fs_info->sectorsize_bits, so as you can see the above our 16k eb->start turns into radix entry 4. When we find a dirty range for our eb, we correctly do bit_start += sectors_per_node, because if we start at bit 0, the next bit for the next eb is 4, to correspond to eb->start 16k. However if our range is clean, we will do bit_start++, which will now put us offset from our radix tree entries. In our case, assume that the first time we check the bitmap the block is not dirty, we increment bit_start so now it == 1, and then we loop around and check again. This time it is dirty, and we go to find that start using the following equation start = folio_start + bit_start * fs_info->sectorsize; so in the case above, eb->start 0 is now dirty, and we calculate start as 0 + 1 * fs_info->sectorsize = 4096 4096 >> 12 = 1 Now we're looking up the radix tree for 1, and we won't find an eb. What's worse is now we're using bit_start == 1, so we do bit_start += sectors_per_node, which is now 5. If that eb is dirty we will run into the same thing, we will look at an offset that is not populated in the radix tree, and now we're skipping the writeout of dirty extent buffers. The best fix for this is to not use sectorsize_bits to address nodes, but that's a larger change. Since this is a fs corruption problem fix it simply by always using sectors_per_node to increment the start bit.Show less

In the Linux kernel, the following vulnerability has been resolved: drm/nouveau: Fix WARN_ON in nouveau_fence_context_kill() Nouveau is mostly designed in a way that it's expected that fences only ever get signaled through nouveau_fence_signal(). However, in at least one other place, nouveau_fence_done(), can signal fences, too. If that happens (race) a signaled fence remains in the pending list for a while, until it gets removed by nouveau_fence_update(). Should nouveau_fence_context_kill() run in the meantime, this would be a bug because the function would attempt to set an error code on an already signaled fence. Have nouveau_fence_context_kill() check for a fence being signaled.Show less

In the Linux kernel, the following vulnerability has been resolved: arm64: errata: Add missing sentinels to Spectre-BHB MIDR arrays Commit a5951389e58d ("arm64: errata: Add newer ARM cores to the spectre_bhb_loop_affected() lists") added some additional CPUs to the Spectre-BHB workaround, including some new arrays for designs that require new 'k' values for the workaround to be effective. Unfortunately, the new arrays omitted the sentinel entry and so is_midr_in_range_list() will walk off the end when it doesn't find a match. With UBSAN enabled, this leads to a crash during boot when is_midr_in_range_list() is inlined (which was more common prior to c8c2647e69be ("arm64: Make  _midr_in_range_list() an exported function")): | Internal error: aarch64 BRK: 00000000f2000001 [#1] PREEMPT SMP | pstate: 804000c5 (Nzcv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) | pc : spectre_bhb_loop_affected+0x28/0x30 | lr : is_spectre_bhb_affected+0x170/0x190 | [...] | Call trace: | spectre_bhb_loop_affected+0x28/0x30 | update_cpu_capabilities+0xc0/0x184 | init_cpu_features+0x188/0x1a4 | cpuinfo_store_boot_cpu+0x4c/0x60 | smp_prepare_boot_cpu+0x38/0x54 | start_kernel+0x8c/0x478 | __primary_switched+0xc8/0xd4 | Code: 6b09011f 54000061 52801080 d65f03c0 (d4200020) | ---[ end trace 0000000000000000 ]--- | Kernel panic - not syncing: aarch64 BRK: Fatal exception Add the missing sentinel entries.Show less

In the Linux kernel, the following vulnerability has been resolved: dm-bufio: don't schedule in atomic context A BUG was reported as below when CONFIG_DEBUG_ATOMIC_SLEEP and try_verify_in_tasklet are enabled. [ 129.444685][ T934] BUG: sleeping function called from invalid context at drivers/md/dm-bufio.c:2421 [ 129.444723][ T934] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 934, name: kworker/1:4 [ 129.444740][ T934] preempt_count: 201, expected: 0 [ 129.444756][ T934] RCU nest depth: 0, expected: 0 [ 129.444781][ T934] Preemption disabled at: [ 129.444789][ T934] [<ffffffd816231900>] shrink_work+0x21c/0x248 [ 129.445167][ T934] kernel BUG at kernel/sched/walt/walt_debug.c:16! [ 129.445183][ T934] Internal error: Oops - BUG: 00000000f2000800 [#1] PREEMPT SMP [ 129.445204][ T934] Skip md ftrace buffer dump for: 0x1609e0 [ 129.447348][ T934] CPU: 1 PID: 934 Comm: kworker/1:4 Tainted: G W OE 6.6.56-android15-8-o-g6f82312b30b9-debug #1 1400000003000000474e5500b3187743670464e8 [ 129.447362][ T934] Hardware name: Qualcomm Technologies, Inc. Parrot QRD, Alpha-M (DT) [ 129.447373][ T934] Workqueue: dm_bufio_cache shrink_work [ 129.447394][ T934] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 129.447406][ T934] pc : android_rvh_schedule_bug+0x0/0x8 [sched_walt_debug] [ 129.447435][ T934] lr : __traceiter_android_rvh_schedule_bug+0x44/0x6c [ 129.447451][ T934] sp : ffffffc0843dbc90 [ 129.447459][ T934] x29: ffffffc0843dbc90 x28: ffffffffffffffff x27: 0000000000000c8b [ 129.447479][ T934] x26: 0000000000000040 x25: ffffff804b3d6260 x24: ffffffd816232b68 [ 129.447497][ T934] x23: ffffff805171c5b4 x22: 0000000000000000 x21: ffffffd816231900 [ 129.447517][ T934] x20: ffffff80306ba898 x19: 0000000000000000 x18: ffffffc084159030 [ 129.447535][ T934] x17: 00000000d2b5dd1f x16: 00000000d2b5dd1f x15: ffffffd816720358 [ 129.447554][ T934] x14: 0000000000000004 x13: ffffff89ef978000 x12: 0000000000000003 [ 129.447572][ T934] x11: ffffffd817a823c4 x10: 0000000000000202 x9 : 7e779c5735de9400 [ 129.447591][ T934] x8 : ffffffd81560d004 x7 : 205b5d3938373434 x6 : ffffffd8167397c8 [ 129.447610][ T934] x5 : 0000000000000000 x4 : 0000000000000001 x3 : ffffffc0843db9e0 [ 129.447629][ T934] x2 : 0000000000002f15 x1 : 0000000000000000 x0 : 0000000000000000 [ 129.447647][ T934] Call trace: [ 129.447655][ T934] android_rvh_schedule_bug+0x0/0x8 [sched_walt_debug 1400000003000000474e550080cce8a8a78606b6] [ 129.447681][ T934] __might_resched+0x190/0x1a8 [ 129.447694][ T934] shrink_work+0x180/0x248 [ 129.447706][ T934] process_one_work+0x260/0x624 [ 129.447718][ T934] worker_thread+0x28c/0x454 [ 129.447729][ T934] kthread+0x118/0x158 [ 129.447742][ T934] ret_from_fork+0x10/0x20 [ 129.447761][ T934] Code: ???????? ???????? ???????? d2b5dd1f (d4210000) [ 129.447772][ T934] ---[ end trace 0000000000000000 ]--- dm_bufio_lock will call spin_lock_bh when try_verify_in_tasklet is enabled, and __scan will be called in atomic context.Show less

In the Linux kernel, the following vulnerability has been resolved: iommu/amd: Fix potential buffer overflow in parse_ivrs_acpihid There is a string parsing logic error which can lead to an overflow of hid or uid buffers. Comparing ACPIID_LEN against a total string length doesn't take into account the lengths of individual hid and uid buffers so the check is insufficient in some cases. For example if the length of hid string is 4 and the length of the uid string is 260, the length of str will be equal to ACPIID_LEN + 1 but uid string will overflow uid buffer which size is 256. The same applies to the hid string with length 13 and uid string with length 250. Check the length of hid and uid strings separately to prevent buffer overflow. Found by Linux Verification Center (linuxtesting.org) with SVACE.Show less

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix use-after-free in ksmbd_session_rpc_open A UAF issue can occur due to a race condition between ksmbd_session_rpc_open() and __session_rpc_close(). Add rpc_lock to the session to protect it.Show less