Linux

In the Linux kernel, the following vulnerability has been resolved: iommu: Fix two issues in iommu_copy_struct_from_user() In the review for iommu_copy_struct_to_user() helper, Matt pointed out that a NULL pointer should be rejected prior to dereferencing it: https://lore.kernel.org/all/86881827-8E2D-461C-BDA3-FA8FD14C343C@nvidia.com And Alok pointed out a typo at the same time: https://lore.kernel.org/all/480536af-6830-43ce-a327-adbd13dc3f1d@oracle.com Since both issues were copied from iommu_copy_struct_from_user(), fix them first in the current header.Show less

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix use-after-free in session logoff The sess->user object can currently be in use by another thread, for example if another connection has sent a session setup request to bind to the session being free'd. The handler for that connection could be in the smb2_sess_setup function which makes use of sess->user.Show less

In the Linux kernel, the following vulnerability has been resolved: powerpc64/ftrace: fix module loading without patchable function entries get_stubs_size assumes that there must always be at least one patchable function entry, which is not always the case (modules that export data but no code), otherwise it returns -ENOEXEC and thus the section header sh_size is set to that value. During module_memory_alloc() the size is passed to execmem_alloc() after being page-aligned and thus set to zero which will cause it to fail the allocation (and thus module loading) as __vmalloc_node_range() checks for zero-sized allocs and returns null: [ 115.466896] module_64: cast_common: doesn't contain __patchable_function_entries. [ 115.469189] ------------[ cut here ]------------ [ 115.469496] WARNING: CPU: 0 PID: 274 at mm/vmalloc.c:3778 __vmalloc_node_range_noprof+0x8b4/0x8f0 ... [ 115.478574] ---[ end trace 0000000000000000 ]--- [ 115.479545] execmem: unable to allocate memory Fix this by removing the check completely, since it is anyway not helpful to propagate this as an error upwards.Show less

In the Linux kernel, the following vulnerability has been resolved: wifi: plfxlc: Remove erroneous assert in plfxlc_mac_release plfxlc_mac_release() asserts that mac->lock is held. This assertion is incorrect, because even if it was possible, it would not be the valid behaviour. The function is used when probe fails or after the device is disconnected. In both cases mac->lock can not be held as the driver is not working with the device at the moment. All functions that use mac->lock unlock it just after it was held. There is also no need to hold mac->lock for plfxlc_mac_release() itself, as mac data is not affected, except for mac->flags, which is modified atomically. This bug leads to the following warning: ================================================================ WARNING: CPU: 0 PID: 127 at drivers/net/wireless/purelifi/plfxlc/mac.c:106 plfxlc_mac_release+0x7d/0xa0 Modules linked in: CPU: 0 PID: 127 Comm: kworker/0:2 Not tainted 6.1.124-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 Workqueue: usb_hub_wq hub_event RIP: 0010:plfxlc_mac_release+0x7d/0xa0 drivers/net/wireless/purelifi/plfxlc/mac.c:106 Call Trace: <TASK> probe+0x941/0xbd0 drivers/net/wireless/purelifi/plfxlc/usb.c:694 usb_probe_interface+0x5c0/0xaf0 drivers/usb/core/driver.c:396 really_probe+0x2ab/0xcb0 drivers/base/dd.c:639 __driver_probe_device+0x1a2/0x3d0 drivers/base/dd.c:785 driver_probe_device+0x50/0x420 drivers/base/dd.c:815 __device_attach_driver+0x2cf/0x510 drivers/base/dd.c:943 bus_for_each_drv+0x183/0x200 drivers/base/bus.c:429 __device_attach+0x359/0x570 drivers/base/dd.c:1015 bus_probe_device+0xba/0x1e0 drivers/base/bus.c:489 device_add+0xb48/0xfd0 drivers/base/core.c:3696 usb_set_configuration+0x19dd/0x2020 drivers/usb/core/message.c:2165 usb_generic_driver_probe+0x84/0x140 drivers/usb/core/generic.c:238 usb_probe_device+0x130/0x260 drivers/usb/core/driver.c:293 really_probe+0x2ab/0xcb0 drivers/base/dd.c:639 __driver_probe_device+0x1a2/0x3d0 drivers/base/dd.c:785 driver_probe_device+0x50/0x420 drivers/base/dd.c:815 __device_attach_driver+0x2cf/0x510 drivers/base/dd.c:943 bus_for_each_drv+0x183/0x200 drivers/base/bus.c:429 __device_attach+0x359/0x570 drivers/base/dd.c:1015 bus_probe_device+0xba/0x1e0 drivers/base/bus.c:489 device_add+0xb48/0xfd0 drivers/base/core.c:3696 usb_new_device+0xbdd/0x18f0 drivers/usb/core/hub.c:2620 hub_port_connect drivers/usb/core/hub.c:5477 [inline] hub_port_connect_change drivers/usb/core/hub.c:5617 [inline] port_event drivers/usb/core/hub.c:5773 [inline] hub_event+0x2efe/0x5730 drivers/usb/core/hub.c:5855 process_one_work+0x8a9/0x11d0 kernel/workqueue.c:2292 worker_thread+0xa47/0x1200 kernel/workqueue.c:2439 kthread+0x28d/0x320 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295 </TASK> ================================================================ Found by Linux Verification Center (linuxtesting.org) with Syzkaller.Show less

In the Linux kernel, the following vulnerability has been resolved: spi: spi-mem: Add fix to avoid divide error For some SPI flash memory operations, dummy bytes are not mandatory. For example, in Winbond SPINAND flash memory devices, the `write_cache` and `update_cache` operation variants have zero dummy bytes. Calculating the duration for SPI memory operations with zero dummy bytes causes a divide error when `ncycles` is calculated in the spi_mem_calc_op_duration(). Add changes to skip the 'ncylcles' calculation for zero dummy bytes. Following divide error is fixed by this change: Oops: divide error: 0000 [#1] PREEMPT SMP NOPTI ... ? do_trap+0xdb/0x100 ? do_error_trap+0x75/0xb0 ? spi_mem_calc_op_duration+0x56/0xb0 ? exc_divide_error+0x3b/0x70 ? spi_mem_calc_op_duration+0x56/0xb0 ? asm_exc_divide_error+0x1b/0x20 ? spi_mem_calc_op_duration+0x56/0xb0 ? spinand_select_op_variant+0xee/0x190 [spinand] spinand_match_and_init+0x13e/0x1a0 [spinand] spinand_manufacturer_match+0x6e/0xa0 [spinand] spinand_probe+0x357/0x7f0 [spinand] ? kernfs_activate+0x87/0xd0 spi_mem_probe+0x7a/0xb0 spi_probe+0x7d/0x130Show less

In the Linux kernel, the following vulnerability has been resolved: bnxt_en: Fix error handling path in bnxt_init_chip() WARN_ON() is triggered in __flush_work() if bnxt_init_chip() fails because we call cancel_work_sync() on dim work that has not been initialized. WARNING: CPU: 37 PID: 5223 at kernel/workqueue.c:4201 __flush_work.isra.0+0x212/0x230 The driver relies on the BNXT_STATE_NAPI_DISABLED bit to check if dim work has already been cancelled. But in the bnxt_open() path, BNXT_STATE_NAPI_DISABLED is not set and this causes the error path to think that it needs to cancel the uninitalized dim work. Fix it by setting BNXT_STATE_NAPI_DISABLED during initialization. The bit will be cleared when we enable NAPI and initialize dim work.Show less

In the Linux kernel, the following vulnerability has been resolved: net: use sock_gen_put() when sk_state is TCP_TIME_WAIT It is possible for a pointer of type struct inet_timewait_sock to be returned from the functions __inet_lookup_established() and __inet6_lookup_established(). This can cause a crash when the returned pointer is of type struct inet_timewait_sock and sock_put() is called on it. The following is a crash call stack that shows sk->sk_wmem_alloc being accessed in sk_free() during the call to sock_put() on a struct inet_timewait_sock pointer. To avoid this issue, use sock_gen_put() instead of sock_put() when sk->sk_state is TCP_TIME_WAIT. mrdump.ko ipanic() + 120 vmlinux notifier_call_chain(nr_to_call=-1, nr_calls=0) + 132 vmlinux atomic_notifier_call_chain(val=0) + 56 vmlinux panic() + 344 vmlinux add_taint() + 164 vmlinux end_report() + 136 vmlinux kasan_report(size=0) + 236 vmlinux report_tag_fault() + 16 vmlinux do_tag_recovery() + 16 vmlinux __do_kernel_fault() + 88 vmlinux do_bad_area() + 28 vmlinux do_tag_check_fault() + 60 vmlinux do_mem_abort() + 80 vmlinux el1_abort() + 56 vmlinux el1h_64_sync_handler() + 124 vmlinux > 0xFFFFFFC080011294() vmlinux __lse_atomic_fetch_add_release(v=0xF2FFFF82A896087C) vmlinux __lse_atomic_fetch_sub_release(v=0xF2FFFF82A896087C) vmlinux arch_atomic_fetch_sub_release(i=1, v=0xF2FFFF82A896087C) + 8 vmlinux raw_atomic_fetch_sub_release(i=1, v=0xF2FFFF82A896087C) + 8 vmlinux atomic_fetch_sub_release(i=1, v=0xF2FFFF82A896087C) + 8 vmlinux __refcount_sub_and_test(i=1, r=0xF2FFFF82A896087C, oldp=0) + 8 vmlinux __refcount_dec_and_test(r=0xF2FFFF82A896087C, oldp=0) + 8 vmlinux refcount_dec_and_test(r=0xF2FFFF82A896087C) + 8 vmlinux sk_free(sk=0xF2FFFF82A8960700) + 28 vmlinux sock_put() + 48 vmlinux tcp6_check_fraglist_gro() + 236 vmlinux tcp6_gro_receive() + 624 vmlinux ipv6_gro_receive() + 912 vmlinux dev_gro_receive() + 1116 vmlinux napi_gro_receive() + 196 ccmni.ko ccmni_rx_callback() + 208 ccmni.ko ccmni_queue_recv_skb() + 388 ccci_dpmaif.ko dpmaif_rxq_push_thread() + 1088 vmlinux kthread() + 268 vmlinux 0xFFFFFFC08001F30C()Show less

In the Linux kernel, the following vulnerability has been resolved: mtd: inftlcore: Add error check for inftl_read_oob() In INFTL_findwriteunit(), the return value of inftl_read_oob() need to be checked. A proper implementation can be found in INFTL_deleteblock(). The status will be set as SECTOR_IGNORE to break from the while-loop correctly if the inftl_read_oob() fails.Show less

In the Linux kernel, the following vulnerability has been resolved: ALSA: ump: Fix buffer overflow at UMP SysEx message conversion The conversion function from MIDI 1.0 to UMP packet contains an internal buffer to keep the incoming MIDI bytes, and its size is 4, as it was supposed to be the max size for a MIDI1 UMP packet data. However, the implementation overlooked that SysEx is handled in a different format, and it can be up to 6 bytes, as found in do_convert_to_ump(). It leads eventually to a buffer overflow, and may corrupt the memory when a longer SysEx message is received. The fix is simply to extend the buffer size to 6 to fit with the SysEx UMP message.Show less

In the Linux kernel, the following vulnerability has been resolved: net_sched: hfsc: Fix a UAF vulnerability in class with netem as child qdisc As described in Gerrard's report [1], we have a UAF case when an hfsc class has a netem child qdisc. The crux of the issue is that hfsc is assuming that checking for cl->qdisc->q.qlen == 0 guarantees that it hasn't inserted the class in the vttree or eltree (which is not true for the netem duplicate case). This patch checks the n_active class variable to make sure that the code won't insert the class in the vttree or eltree twice, catering for the reentrant case. [1] https://lore.kernel.org/netdev/CAHcdcOm+03OD2j6R0=YHKqmy=VgJ8xEOKuP6c7mSgnp-TEJJbw@mail.gmail.com/Show less

In the Linux kernel, the following vulnerability has been resolved: media: dw2102: Fix null-ptr-deref in dw2102_i2c_transfer() In dw2102_i2c_transfer, msg is controlled by user. When msg[i].buf is null and msg[i].len is zero, former checks on msg[i].buf would be passed. Malicious data finally reach dw2102_i2c_transfer. If accessing msg[i].buf[0] without sanity check, null ptr deref would happen. We add check on msg[i].len to prevent crash. Similar commit: commit 950e252cb469 ("[media] dw2102: limit messages to buffer size")Show less

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btsdio: fix use after free bug in btsdio_remove due to race condition In btsdio_probe, the data->work is bound with btsdio_work. It will be started in btsdio_send_frame. If the btsdio_remove runs with a unfinished work, there may be a race condition that hdev is freed but used in btsdio_work. Fix it by canceling the work before do cleanup in btsdio_remove.Show less

In the Linux kernel, the following vulnerability has been resolved: ASoC: ops: Consistently treat platform_max as control value This reverts commit 9bdd10d57a88 ("ASoC: ops: Shift tested values in snd_soc_put_volsw() by +min"), and makes some additional related updates. There are two ways the platform_max could be interpreted; the maximum register value, or the maximum value the control can be set to. The patch moved from treating the value as a control value to a register one. When the patch was applied it was technically correct as snd_soc_limit_volume() also used the register interpretation. However, even then most of the other usages treated platform_max as a control value, and snd_soc_limit_volume() has since been updated to also do so in commit fb9ad24485087 ("ASoC: ops: add correct range check for limiting volume"). That patch however, missed updating snd_soc_put_volsw() back to the control interpretation, and fixing snd_soc_info_volsw_range(). The control interpretation makes more sense as limiting is typically done from the machine driver, so it is appropriate to use the customer facing representation rather than the internal codec representation. Update all the code to consistently use this interpretation of platform_max. Finally, also add some comments to the soc_mixer_control struct to hopefully avoid further patches switching between the two approaches.Show less

In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Fix null-ptr-deref in mlx5_create_{inner_,}ttc_table() Add NULL check for mlx5_get_flow_namespace() returns in mlx5_create_inner_ttc_table() and mlx5_create_ttc_table() to prevent NULL pointer dereference.Show less

In the Linux kernel, the following vulnerability has been resolved: pds_core: handle unsupported PDS_CORE_CMD_FW_CONTROL result If the FW doesn't support the PDS_CORE_CMD_FW_CONTROL command the driver might at the least print garbage and at the worst crash when the user runs the "devlink dev info" devlink command. This happens because the stack variable fw_list is not 0 initialized which results in fw_list.num_fw_slots being a garbage value from the stack. Then the driver tries to access fw_list.fw_names[i] with i >= ARRAY_SIZE and runs off the end of the array. Fix this by initializing the fw_list and by not failing completely if the devcmd fails because other useful information is printed via devlink dev info even if the devcmd fails.Show less

In the Linux kernel, the following vulnerability has been resolved: pds_core: make wait_context part of q_info Make the wait_context a full part of the q_info struct rather than a stack variable that goes away after pdsc_adminq_post() is done so that the context is still available after the wait loop has given up. There was a case where a slow development firmware caused the adminq request to time out, but then later the FW finally finished the request and sent the interrupt. The handler tried to complete_all() the completion context that had been created on the stack in pdsc_adminq_post() but no longer existed. This caused bad pointer usage, kernel crashes, and much wailing and gnashing of teeth.Show less

In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Reset IRTE to host control if *new* route isn't postable Restore an IRTE back to host control (remapped or posted MSI mode) if the *new* GSI route prevents posting the IRQ directly to a vCPU, regardless of the GSI routing type. Updating the IRTE if and only if the new GSI is an MSI results in KVM leaving an IRTE posting to a vCPU. The dangling IRTE can result in interrupts being incorrectly delivered to the guest, and in the worst case scenario can result in use-after-free, e.g. if the VM is torn down, but the underlying host IRQ isn't freed.Show less

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix deadlock between rcu_tasks_trace and event_mutex. Fix the following deadlock: CPU A _free_event() perf_kprobe_destroy() mutex_lock(&event_mutex) perf_trace_event_unreg() synchronize_rcu_tasks_trace() There are several paths where _free_event() grabs event_mutex and calls sync_rcu_tasks_trace. Above is one such case. CPU B bpf_prog_test_run_syscall() rcu_read_lock_trace() bpf_prog_run_pin_on_cpu() bpf_prog_load() bpf_tracing_func_proto() trace_set_clr_event() mutex_lock(&event_mutex) Delegate trace_set_clr_event() to workqueue to avoid such lock dependency.Show less

In the Linux kernel, the following vulnerability has been resolved: s390/sclp: Add check for get_zeroed_page() Add check for the return value of get_zeroed_page() in sclp_console_init() to prevent null pointer dereference. Furthermore, to solve the memory leak caused by the loop allocation, add a free helper to do the free job.Show less

In the Linux kernel, the following vulnerability has been resolved: usb: xhci: Fix isochronous Ring Underrun/Overrun event handling The TRB pointer of these events points at enqueue at the time of error occurrence on xHCI 1.1+ HCs or it's NULL on older ones. By the time we are handling the event, a new TD may be queued at this ring position. I can trigger this race by rising interrupt moderation to increase IRQ handling delay. Similar delay may occur naturally due to system load. If this ever happens after a Missed Service Error, missed TDs will be skipped and the new TD processed as if it matched the event. It could be given back prematurely, risking data loss or buffer UAF by the xHC. Don't complete TDs on xrun events and don't warn if queued TDs don't match the event's TRB pointer, which can be NULL or a link/no-op TRB. Don't warn if there are no queued TDs at all. Now that it's safe, also handle xrun events if the skip flag is clear. This ensures completion of any TD stuck in 'error mid TD' state right before the xrun event, which could happen if a driver submits a finite number of URBs to a buggy HC and then an error occurs on the last TD.Show less