Linux

In the Linux kernel, the following vulnerability has been resolved: drivers:md:fix a potential use-after-free bug In line 2884, "raid5_release_stripe(sh);" drops the reference to sh and may cause sh to be released. However, sh is subsequently used in lines 2886 "if (sh->batch_head && sh != sh->batch_head)". This may result in an use-after-free bug. It can be fixed by moving "raid5_release_stripe(sh);" to the bottom of the function.Show less

In the Linux kernel, the following vulnerability has been resolved: ext4: block range must be validated before use in ext4_mb_clear_bb() Block range to free is validated in ext4_free_blocks() using ext4_inode_block_valid() and then it's passed to ext4_mb_clear_bb(). However in some situations on bigalloc file system the range might be adjusted after the validation in ext4_free_blocks() which can lead to troubles on corrupted file systems such as one found by syzkaller that resulted in the following BUG kernel BUG at fs/ext4/ext4.h:3319! PREEMPT SMP NOPTI CPU: 28 PID: 4243 Comm: repro Kdump: loaded Not tainted 5.19.0-rc6+ #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1.fc35 04/01/2014 RIP: 0010:ext4_free_blocks+0x95e/0xa90 Call Trace: <TASK> ? lock_timer_base+0x61/0x80 ? __es_remove_extent+0x5a/0x760 ? __mod_timer+0x256/0x380 ? ext4_ind_truncate_ensure_credits+0x90/0x220 ext4_clear_blocks+0x107/0x1b0 ext4_free_data+0x15b/0x170 ext4_ind_truncate+0x214/0x2c0 ? _raw_spin_unlock+0x15/0x30 ? ext4_discard_preallocations+0x15a/0x410 ? ext4_journal_check_start+0xe/0x90 ? __ext4_journal_start_sb+0x2f/0x110 ext4_truncate+0x1b5/0x460 ? __ext4_journal_start_sb+0x2f/0x110 ext4_evict_inode+0x2b4/0x6f0 evict+0xd0/0x1d0 ext4_enable_quotas+0x11f/0x1f0 ext4_orphan_cleanup+0x3de/0x430 ? proc_create_seq_private+0x43/0x50 ext4_fill_super+0x295f/0x3ae0 ? snprintf+0x39/0x40 ? sget_fc+0x19c/0x330 ? ext4_reconfigure+0x850/0x850 get_tree_bdev+0x16d/0x260 vfs_get_tree+0x25/0xb0 path_mount+0x431/0xa70 __x64_sys_mount+0xe2/0x120 do_syscall_64+0x5b/0x80 ? do_user_addr_fault+0x1e2/0x670 ? exc_page_fault+0x70/0x170 entry_SYSCALL_64_after_hwframe+0x46/0xb0 RIP: 0033:0x7fdf4e512ace Fix it by making sure that the block range is properly validated before used every time it changes in ext4_free_blocks() or ext4_mb_clear_bb().Show less

In the Linux kernel, the following vulnerability has been resolved: ext4: avoid resizing to a partial cluster size This patch avoids an attempt to resize the filesystem to an unaligned cluster boundary. An online resize to a size that is not integral to cluster size results in the last iteration attempting to grow the fs by a negative amount, which trips a BUG_ON and leaves the fs with a corrupted in-memory superblock.Show less

In the Linux kernel, the following vulnerability has been resolved: tty: serial: Fix refcount leak bug in ucc_uart.c In soc_info(), of_find_node_by_type() will return a node pointer with refcount incremented. We should use of_node_put() when it is not used anymore.Show less

In the Linux kernel, the following vulnerability has been resolved: mips: cavium-octeon: Fix missing of_node_put() in octeon2_usb_clocks_start We should call of_node_put() for the reference 'uctl_node' returned by of_get_parent() which will increase the refcount. Otherwise, there will be a refcount leak bug.Show less

In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: Intel: cnl: Do not process IPC reply before firmware boot It is not yet clear, but it is possible to create a firmware so broken that it will send a reply message before a FW_READY message (it is not yet clear if FW_READY will arrive later). Since the reply_data is allocated only after the FW_READY message, this will lead to a NULL pointer dereference if not filtered out. The issue was reported with IPC4 firmware but the same condition is present for IPC3.Show less

In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: Intel: hda-ipc: Do not process IPC reply before firmware boot It is not yet clear, but it is possible to create a firmware so broken that it will send a reply message before a FW_READY message (it is not yet clear if FW_READY will arrive later). Since the reply_data is allocated only after the FW_READY message, this will lead to a NULL pointer dereference if not filtered out. The issue was reported with IPC4 firmware but the same condition is present for IPC3.Show less

In the Linux kernel, the following vulnerability has been resolved: mm/gup: fix FOLL_FORCE COW security issue and remove FOLL_COW Ever since the Dirty COW (CVE-2016-5195) security issue happened, we know that FOLL_FORCE can be possibly dangerous, especially if there are races that can be exploited by user space. Right now, it would be sufficient to have some code that sets a PTE of a R/O-mapped shared page dirty, in order for it to erroneously become writable by FOLL_FORCE. The implications of setting a write-protected PTE dirty might not be immediately obvious to everyone. And in fact ever since commit 9ae0f87d009c ("mm/shmem: unconditionally set pte dirty in mfill_atomic_install_pte"), we can use UFFDIO_CONTINUE to map a shmem page R/O while marking the pte dirty. This can be used by unprivileged user space to modify tmpfs/shmem file content even if the user does not have write permissions to the file, and to bypass memfd write sealing -- Dirty COW restricted to tmpfs/shmem (CVE-2022-2590). To fix such security issues for good, the insight is that we really only need that fancy retry logic (FOLL_COW) for COW mappings that are not writable (!VM_WRITE). And in a COW mapping, we really only broke COW if we have an exclusive anonymous page mapped. If we have something else mapped, or the mapped anonymous page might be shared (!PageAnonExclusive), we have to trigger a write fault to break COW. If we don't find an exclusive anonymous page when we retry, we have to trigger COW breaking once again because something intervened. Let's move away from this mandatory-retry + dirty handling and rely on our PageAnonExclusive() flag for making a similar decision, to use the same COW logic as in other kernel parts here as well. In case we stumble over a PTE in a COW mapping that does not map an exclusive anonymous page, COW was not properly broken and we have to trigger a fake write-fault to break COW. Just like we do in can_change_pte_writable() added via commit 64fe24a3e05e ("mm/mprotect: try avoiding write faults for exclusive anonymous pages when changing protection") and commit 76aefad628aa ("mm/mprotect: fix soft-dirty check in can_change_pte_writable()"), take care of softdirty and uffd-wp manually. For example, a write() via /proc/self/mem to a uffd-wp-protected range has to fail instead of silently granting write access and bypassing the userspace fault handler. Note that FOLL_FORCE is not only used for debug access, but also triggered by applications without debug intentions, for example, when pinning pages via RDMA. This fixes CVE-2022-2590. Note that only x86_64 and aarch64 are affected, because only those support CONFIG_HAVE_ARCH_USERFAULTFD_MINOR. Fortunately, FOLL_COW is no longer required to handle FOLL_FORCE. So let's just get rid of it. Thanks to Nadav Amit for pointing out that the pte_dirty() check in FOLL_FORCE code is problematic and might be exploitable. Note 1: We don't check for the PTE being dirty because it doesn't matter for making a "was COWed" decision anymore, and whoever modifies the page has to set the page dirty either way. Note 2: Kernels before extended uffd-wp support and before PageAnonExclusive (< 5.19) can simply revert the problematic commit instead and be safe regarding UFFDIO_CONTINUE. A backport to v5.19 requires minor adjustments due to lack of vma_soft_dirty_enabled().Show less

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to avoid use f2fs_bug_on() in f2fs_new_node_page() As Dipanjan Das <mail.dipanjan.das@gmail.com> reported, syzkaller found a f2fs bug as below: RIP: 0010:f2fs_new_node_page+0x19ac/0x1fc0 fs/f2fs/node.c:1295 Call Trace: write_all_xattrs fs/f2fs/xattr.c:487 [inline] __f2fs_setxattr+0xe76/0x2e10 fs/f2fs/xattr.c:743 f2fs_setxattr+0x233/0xab0 fs/f2fs/xattr.c:790 f2fs_xattr_generic_set+0x133/0x170 fs/f2fs/xattr.c:86 __vfs_setxattr+0x115/0x180 fs/xattr.c:182 __vfs_setxattr_noperm+0x125/0x5f0 fs/xattr.c:216 __vfs_setxattr_locked+0x1cf/0x260 fs/xattr.c:277 vfs_setxattr+0x13f/0x330 fs/xattr.c:303 setxattr+0x146/0x160 fs/xattr.c:611 path_setxattr+0x1a7/0x1d0 fs/xattr.c:630 __do_sys_lsetxattr fs/xattr.c:653 [inline] __se_sys_lsetxattr fs/xattr.c:649 [inline] __x64_sys_lsetxattr+0xbd/0x150 fs/xattr.c:649 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 NAT entry and nat bitmap can be inconsistent, e.g. one nid is free in nat bitmap, and blkaddr in its NAT entry is not NULL_ADDR, it may trigger BUG_ON() in f2fs_new_node_page(), fix it.Show less

In the Linux kernel, the following vulnerability has been resolved: powerpc/64: Init jump labels before parse_early_param() On 64-bit, calling jump_label_init() in setup_feature_keys() is too late because static keys may be used in subroutines of parse_early_param() which is again subroutine of early_init_devtree(). For example booting with "threadirqs": static_key_enable_cpuslocked(): static key '0xc000000002953260' used before call to jump_label_init() WARNING: CPU: 0 PID: 0 at kernel/jump_label.c:166 static_key_enable_cpuslocked+0xfc/0x120 ... NIP static_key_enable_cpuslocked+0xfc/0x120 LR static_key_enable_cpuslocked+0xf8/0x120 Call Trace: static_key_enable_cpuslocked+0xf8/0x120 (unreliable) static_key_enable+0x30/0x50 setup_forced_irqthreads+0x28/0x40 do_early_param+0xa0/0x108 parse_args+0x290/0x4e0 parse_early_options+0x48/0x5c parse_early_param+0x58/0x84 early_init_devtree+0xd4/0x518 early_setup+0xb4/0x214 So call jump_label_init() just before parse_early_param() in early_init_devtree(). [mpe: Add call trace to change log and minor wording edits.]Show less

In the Linux kernel, the following vulnerability has been resolved: venus: pm_helpers: Fix warning in OPP during probe Fix the following WARN triggered during Venus driver probe on 5.19.0-rc8-next-20220728: WARNING: CPU: 7 PID: 339 at drivers/opp/core.c:2471 dev_pm_opp_set_config+0x49c/0x610 Modules linked in: qcom_spmi_adc5 rtc_pm8xxx qcom_spmi_adc_tm5 leds_qcom_lpg led_class_multicolor qcom_pon qcom_vadc_common venus_core(+) qcom_spmi_temp_alarm v4l2_mem2mem videobuf2_v4l2 msm(+) videobuf2_common crct10dif_ce spi_geni_qcom snd_soc_sm8250 i2c_qcom_geni gpu_sched snd_soc_qcom_common videodev qcom_q6v5_pas soundwire_qcom drm_dp_aux_bus qcom_stats drm_display_helper qcom_pil_info soundwire_bus snd_soc_lpass_va_macro mc qcom_q6v5 phy_qcom_snps_femto_v2 qcom_rng snd_soc_lpass_macro_common snd_soc_lpass_wsa_macro lpass_gfm_sm8250 slimbus qcom_sysmon qcom_common qcom_glink_smem qmi_helpers qcom_wdt mdt_loader socinfo icc_osm_l3 display_connector drm_kms_helper qnoc_sm8250 drm fuse ip_tables x_tables ipv6 CPU: 7 PID: 339 Comm: systemd-udevd Not tainted 5.19.0-rc8-next-20220728 #4 Hardware name: Qualcomm Technologies, Inc. Robotics RB5 (DT) pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : dev_pm_opp_set_config+0x49c/0x610 lr : dev_pm_opp_set_config+0x58/0x610 sp : ffff8000093c3710 x29: ffff8000093c3710 x28: ffffbca3959d82b8 x27: ffff8000093c3d00 x26: ffffbca3959d8e08 x25: ffff4396cac98118 x24: ffff4396c0e24810 x23: ffff4396c4272c40 x22: ffff4396c0e24810 x21: ffff8000093c3810 x20: ffff4396cac36800 x19: ffff4396cac96800 x18: 0000000000000000 x17: 0000000000000003 x16: ffffbca3f4edf198 x15: 0000001cba64a858 x14: 0000000000000180 x13: 000000000000017e x12: 0000000000000000 x11: 0000000000000002 x10: 0000000000000a60 x9 : ffff8000093c35c0 x8 : ffff4396c4273700 x7 : ffff43983efca6c0 x6 : ffff43983efca640 x5 : 00000000410fd0d0 x4 : ffff4396c4272c40 x3 : ffffbca3f5d1e008 x2 : 0000000000000000 x1 : ffff4396c2421600 x0 : ffff4396cac96860 Call trace: dev_pm_opp_set_config+0x49c/0x610 devm_pm_opp_set_config+0x18/0x70 vcodec_domains_get+0xb8/0x1638 [venus_core] core_get_v4+0x1d8/0x218 [venus_core] venus_probe+0xf4/0x468 [venus_core] platform_probe+0x68/0xd8 really_probe+0xbc/0x2a8 __driver_probe_device+0x78/0xe0 driver_probe_device+0x3c/0xf0 __driver_attach+0x70/0x120 bus_for_each_dev+0x70/0xc0 driver_attach+0x24/0x30 bus_add_driver+0x150/0x200 driver_register+0x64/0x120 __platform_driver_register+0x28/0x38 qcom_venus_driver_init+0x24/0x1000 [venus_core] do_one_initcall+0x54/0x1c8 do_init_module+0x44/0x1d0 load_module+0x16c8/0x1aa0 __do_sys_finit_module+0xbc/0x110 __arm64_sys_finit_module+0x20/0x30 invoke_syscall+0x44/0x108 el0_svc_common.constprop.0+0xcc/0xf0 do_el0_svc+0x2c/0xb8 el0_svc+0x2c/0x88 el0t_64_sync_handler+0xb8/0xc0 el0t_64_sync+0x18c/0x190 qcom-venus: probe of aa00000.video-codec failed with error -16 The fix is re-ordering the code related to OPP core. The OPP core expects all configuration options to be provided before the OPP table is added.Show less

In the Linux kernel, the following vulnerability has been resolved: video: fbdev: i740fb: Check the argument of i740_calc_vclk() Since the user can control the arguments of the ioctl() from the user space, under special arguments that may result in a divide-by-zero bug. If the user provides an improper 'pixclock' value that makes the argumet of i740_calc_vclk() less than 'I740_RFREQ_FIX', it will cause a divide-by-zero bug in: drivers/video/fbdev/i740fb.c:353 p_best = min(15, ilog2(I740_MAX_VCO_FREQ / (freq / I740_RFREQ_FIX))); The following log can reveal it: divide error: 0000 [#1] PREEMPT SMP KASAN PTI RIP: 0010:i740_calc_vclk drivers/video/fbdev/i740fb.c:353 [inline] RIP: 0010:i740fb_decode_var drivers/video/fbdev/i740fb.c:646 [inline] RIP: 0010:i740fb_set_par+0x163f/0x3b70 drivers/video/fbdev/i740fb.c:742 Call Trace: fb_set_var+0x604/0xeb0 drivers/video/fbdev/core/fbmem.c:1034 do_fb_ioctl+0x234/0x670 drivers/video/fbdev/core/fbmem.c:1110 fb_ioctl+0xdd/0x130 drivers/video/fbdev/core/fbmem.c:1189 Fix this by checking the argument of i740_calc_vclk() first.Show less

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix null-ptr-deref in f2fs_get_dnode_of_data There is issue as follows when test f2fs atomic write: F2FS-fs (loop0): Can't find valid F2FS filesystem in 2th superblock F2FS-fs (loop0): invalid crc_offset: 0 F2FS-fs (loop0): f2fs_check_nid_range: out-of-range nid=1, run fsck to fix. F2FS-fs (loop0): f2fs_check_nid_range: out-of-range nid=2, run fsck to fix. ================================================================== BUG: KASAN: null-ptr-deref in f2fs_get_dnode_of_data+0xac/0x16d0 Read of size 8 at addr 0000000000000028 by task rep/1990 CPU: 4 PID: 1990 Comm: rep Not tainted 5.19.0-rc6-next-20220715 #266 Call Trace: <TASK> dump_stack_lvl+0x6e/0x91 print_report.cold+0x49a/0x6bb kasan_report+0xa8/0x130 f2fs_get_dnode_of_data+0xac/0x16d0 f2fs_do_write_data_page+0x2a5/0x1030 move_data_page+0x3c5/0xdf0 do_garbage_collect+0x2015/0x36c0 f2fs_gc+0x554/0x1d30 f2fs_balance_fs+0x7f5/0xda0 f2fs_write_single_data_page+0xb66/0xdc0 f2fs_write_cache_pages+0x716/0x1420 f2fs_write_data_pages+0x84f/0x9a0 do_writepages+0x130/0x3a0 filemap_fdatawrite_wbc+0x87/0xa0 file_write_and_wait_range+0x157/0x1c0 f2fs_do_sync_file+0x206/0x12d0 f2fs_sync_file+0x99/0xc0 vfs_fsync_range+0x75/0x140 f2fs_file_write_iter+0xd7b/0x1850 vfs_write+0x645/0x780 ksys_write+0xf1/0x1e0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd As 3db1de0e582c commit changed atomic write way which new a cow_inode for atomic write file, and also mark cow_inode as FI_ATOMIC_FILE. When f2fs_do_write_data_page write cow_inode will use cow_inode's cow_inode which is NULL. Then will trigger null-ptr-deref. To solve above issue, introduce FI_COW_FILE flag for COW inode. Fiexes: 3db1de0e582c("f2fs: change the current atomic write way")Show less

In the Linux kernel, the following vulnerability has been resolved: kprobes: don't call disarm_kprobe() for disabled kprobes The assumption in __disable_kprobe() is wrong, and it could try to disarm an already disarmed kprobe and fire the WARN_ONCE() below. [0] We can easily reproduce this issue. 1. Write 0 to /sys/kernel/debug/kprobes/enabled. # echo 0 > /sys/kernel/debug/kprobes/enabled 2. Run execsnoop. At this time, one kprobe is disabled. # /usr/share/bcc/tools/execsnoop & [1] 2460 PCOMM PID PPID RET ARGS # cat /sys/kernel/debug/kprobes/list ffffffff91345650 r __x64_sys_execve+0x0 [FTRACE] ffffffff91345650 k __x64_sys_execve+0x0 [DISABLED][FTRACE] 3. Write 1 to /sys/kernel/debug/kprobes/enabled, which changes kprobes_all_disarmed to false but does not arm the disabled kprobe. # echo 1 > /sys/kernel/debug/kprobes/enabled # cat /sys/kernel/debug/kprobes/list ffffffff91345650 r __x64_sys_execve+0x0 [FTRACE] ffffffff91345650 k __x64_sys_execve+0x0 [DISABLED][FTRACE] 4. Kill execsnoop, when __disable_kprobe() calls disarm_kprobe() for the disabled kprobe and hits the WARN_ONCE() in __disarm_kprobe_ftrace(). # fg /usr/share/bcc/tools/execsnoop ^C Actually, WARN_ONCE() is fired twice, and __unregister_kprobe_top() misses some cleanups and leaves the aggregated kprobe in the hash table. Then, __unregister_trace_kprobe() initialises tk->rp.kp.list and creates an infinite loop like this. aggregated kprobe.list -> kprobe.list -. ^ | '.__.' In this situation, these commands fall into the infinite loop and result in RCU stall or soft lockup. cat /sys/kernel/debug/kprobes/list : show_kprobe_addr() enters into the infinite loop with RCU. /usr/share/bcc/tools/execsnoop : warn_kprobe_rereg() holds kprobe_mutex, and __get_valid_kprobe() is stuck in the loop. To avoid the issue, make sure we don't call disarm_kprobe() for disabled kprobes. [0] Failed to disarm kprobe-ftrace at __x64_sys_execve+0x0/0x40 (error -2) WARNING: CPU: 6 PID: 2460 at kernel/kprobes.c:1130 __disarm_kprobe_ftrace.isra.19 (kernel/kprobes.c:1129) Modules linked in: ena CPU: 6 PID: 2460 Comm: execsnoop Not tainted 5.19.0+ #28 Hardware name: Amazon EC2 c5.2xlarge/, BIOS 1.0 10/16/2017 RIP: 0010:__disarm_kprobe_ftrace.isra.19 (kernel/kprobes.c:1129) Code: 24 8b 02 eb c1 80 3d c4 83 f2 01 00 75 d4 48 8b 75 00 89 c2 48 c7 c7 90 fa 0f 92 89 04 24 c6 05 ab 83 01 e8 e4 94 f0 ff <0f> 0b 8b 04 24 eb b1 89 c6 48 c7 c7 60 fa 0f 92 89 04 24 e8 cc 94 RSP: 0018:ffff9e6ec154bd98 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffffffff930f7b00 RCX: 0000000000000001 RDX: 0000000080000001 RSI: ffffffff921461c5 RDI: 00000000ffffffff RBP: ffff89c504286da8 R08: 0000000000000000 R09: c0000000fffeffff R10: 0000000000000000 R11: ffff9e6ec154bc28 R12: ffff89c502394e40 R13: ffff89c502394c00 R14: ffff9e6ec154bc00 R15: 0000000000000000 FS: 00007fe800398740(0000) GS:ffff89c812d80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000c00057f010 CR3: 0000000103b54006 CR4: 00000000007706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> __disable_kprobe (kernel/kprobes.c:1716) disable_kprobe (kernel/kprobes.c:2392) __disable_trace_kprobe (kernel/trace/trace_kprobe.c:340) disable_trace_kprobe (kernel/trace/trace_kprobe.c:429) perf_trace_event_unreg.isra.2 (./include/linux/tracepoint.h:93 kernel/trace/trace_event_perf.c:168) perf_kprobe_destroy (kernel/trace/trace_event_perf.c:295) _free_event (kernel/events/core.c:4971) perf_event_release_kernel (kernel/events/core.c:5176) perf_release (kernel/events/core.c:5186) __fput (fs/file_table.c:321) task_work_run (./include/linux/ ---truncated---Show less

In the Linux kernel, the following vulnerability has been resolved: xfrm: fix refcount leak in __xfrm_policy_check() The issue happens on an error path in __xfrm_policy_check(). When the fetching process of the object `pols[1]` fails, the function simply returns 0, forgetting to decrement the reference count of `pols[0]`, which is incremented earlier by either xfrm_sk_policy_lookup() or xfrm_policy_lookup(). This may result in memory leaks. Fix it by decreasing the reference count of `pols[0]` in that path.Show less

In the Linux kernel, the following vulnerability has been resolved: NFSv4.2 fix problems with __nfs42_ssc_open A destination server while doing a COPY shouldn't accept using the passed in filehandle if its not a regular filehandle. If alloc_file_pseudo() has failed, we need to decrement a reference on the newly created inode, otherwise it leaks.Show less

In the Linux kernel, the following vulnerability has been resolved: nfc: pn533: Fix use-after-free bugs caused by pn532_cmd_timeout When the pn532 uart device is detaching, the pn532_uart_remove() is called. But there are no functions in pn532_uart_remove() that could delete the cmd_timeout timer, which will cause use-after-free bugs. The process is shown below: (thread 1) | (thread 2) | pn532_uart_send_frame pn532_uart_remove | mod_timer(&pn532->cmd_timeout,...) ... | (wait a time) kfree(pn532) //FREE | pn532_cmd_timeout | pn532_uart_send_frame | pn532->... //USE This patch adds del_timer_sync() in pn532_uart_remove() in order to prevent the use-after-free bugs. What's more, the pn53x_unregister_nfc() is well synchronized, it sets nfc_dev->shutting_down to true and there are no syscalls could restart the cmd_timeout timer.Show less

In the Linux kernel, the following vulnerability has been resolved: xfrm: policy: fix metadata dst->dev xmit null pointer dereference When we try to transmit an skb with metadata_dst attached (i.e. dst->dev == NULL) through xfrm interface we can hit a null pointer dereference[1] in xfrmi_xmit2() -> xfrm_lookup_with_ifid() due to the check for a loopback skb device when there's no policy which dereferences dst->dev unconditionally. Not having dst->dev can be interepreted as it not being a loopback device, so just add a check for a null dst_orig->dev. With this fix xfrm interface's Tx error counters go up as usual. [1] net-next calltrace captured via netconsole: BUG: kernel NULL pointer dereference, address: 00000000000000c0 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP CPU: 1 PID: 7231 Comm: ping Kdump: loaded Not tainted 5.19.0+ #24 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.0-1.fc36 04/01/2014 RIP: 0010:xfrm_lookup_with_ifid+0x5eb/0xa60 Code: 8d 74 24 38 e8 26 a4 37 00 48 89 c1 e9 12 fc ff ff 49 63 ed 41 83 fd be 0f 85 be 01 00 00 41 be ff ff ff ff 45 31 ed 48 8b 03 <f6> 80 c0 00 00 00 08 75 0f 41 80 bc 24 19 0d 00 00 01 0f 84 1e 02 RSP: 0018:ffffb0db82c679f0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffffd0db7fcad430 RCX: ffffb0db82c67a10 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffb0db82c67a80 RBP: ffffb0db82c67a80 R08: ffffb0db82c67a14 R09: 0000000000000000 R10: 0000000000000000 R11: ffff8fa449667dc8 R12: ffffffff966db880 R13: 0000000000000000 R14: 00000000ffffffff R15: 0000000000000000 FS: 00007ff35c83f000(0000) GS:ffff8fa478480000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000000c0 CR3: 000000001ebb7000 CR4: 0000000000350ee0 Call Trace: <TASK> xfrmi_xmit+0xde/0x460 ? tcf_bpf_act+0x13d/0x2a0 dev_hard_start_xmit+0x72/0x1e0 __dev_queue_xmit+0x251/0xd30 ip_finish_output2+0x140/0x550 ip_push_pending_frames+0x56/0x80 raw_sendmsg+0x663/0x10a0 ? try_charge_memcg+0x3fd/0x7a0 ? __mod_memcg_lruvec_state+0x93/0x110 ? sock_sendmsg+0x30/0x40 sock_sendmsg+0x30/0x40 __sys_sendto+0xeb/0x130 ? handle_mm_fault+0xae/0x280 ? do_user_addr_fault+0x1e7/0x680 ? kvm_read_and_reset_apf_flags+0x3b/0x50 __x64_sys_sendto+0x20/0x30 do_syscall_64+0x34/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 RIP: 0033:0x7ff35cac1366 Code: eb 0b 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 11 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 72 c3 90 55 48 83 ec 30 44 89 4c 24 2c 4c 89 RSP: 002b:00007fff738e4028 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 00007fff738e57b0 RCX: 00007ff35cac1366 RDX: 0000000000000040 RSI: 0000557164e4b450 RDI: 0000000000000003 RBP: 0000557164e4b450 R08: 00007fff738e7a2c R09: 0000000000000010 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000040 R13: 00007fff738e5770 R14: 00007fff738e4030 R15: 0000001d00000001 </TASK> Modules linked in: netconsole veth br_netfilter bridge bonding virtio_net [last unloaded: netconsole] CR2: 00000000000000c0Show less

In the Linux kernel, the following vulnerability has been resolved: ice: xsk: prohibit usage of non-balanced queue id Fix the following scenario: 1. ethtool -L $IFACE rx 8 tx 96 2. xdpsock -q 10 -t -z Above refers to a case where user would like to attach XSK socket in txonly mode at a queue id that does not have a corresponding Rx queue. At this moment ice's XSK logic is tightly bound to act on a "queue pair", e.g. both Tx and Rx queues at a given queue id are disabled/enabled and both of them will get XSK pool assigned, which is broken for the presented queue configuration. This results in the splat included at the bottom, which is basically an OOB access to Rx ring array. To fix this, allow using the ids only in scope of "combined" queues reported by ethtool. However, logic should be rewritten to allow such configurations later on, which would end up as a complete rewrite of the control path, so let us go with this temporary fix. [420160.558008] BUG: kernel NULL pointer dereference, address: 0000000000000082 [420160.566359] #PF: supervisor read access in kernel mode [420160.572657] #PF: error_code(0x0000) - not-present page [420160.579002] PGD 0 P4D 0 [420160.582756] Oops: 0000 [#1] PREEMPT SMP NOPTI [420160.588396] CPU: 10 PID: 21232 Comm: xdpsock Tainted: G OE 5.19.0-rc7+ #10 [420160.597893] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0008.031920191559 03/19/2019 [420160.609894] RIP: 0010:ice_xsk_pool_setup+0x44/0x7d0 [ice] [420160.616968] Code: f3 48 83 ec 40 48 8b 4f 20 48 8b 3f 65 48 8b 04 25 28 00 00 00 48 89 44 24 38 31 c0 48 8d 04 ed 00 00 00 00 48 01 c1 48 8b 11 <0f> b7 92 82 00 00 00 48 85 d2 0f 84 2d 75 00 00 48 8d 72 ff 48 85 [420160.639421] RSP: 0018:ffffc9002d2afd48 EFLAGS: 00010282 [420160.646650] RAX: 0000000000000050 RBX: ffff88811d8bdd00 RCX: ffff888112c14ff8 [420160.655893] RDX: 0000000000000000 RSI: ffff88811d8bdd00 RDI: ffff888109861000 [420160.665166] RBP: 000000000000000a R08: 000000000000000a R09: 0000000000000000 [420160.674493] R10: 000000000000889f R11: 0000000000000000 R12: 000000000000000a [420160.683833] R13: 000000000000000a R14: 0000000000000000 R15: ffff888117611828 [420160.693211] FS: 00007fa869fc1f80(0000) GS:ffff8897e0880000(0000) knlGS:0000000000000000 [420160.703645] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [420160.711783] CR2: 0000000000000082 CR3: 00000001d076c001 CR4: 00000000007706e0 [420160.721399] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [420160.731045] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [420160.740707] PKRU: 55555554 [420160.745960] Call Trace: [420160.750962] <TASK> [420160.755597] ? kmalloc_large_node+0x79/0x90 [420160.762703] ? __kmalloc_node+0x3f5/0x4b0 [420160.769341] xp_assign_dev+0xfd/0x210 [420160.775661] ? shmem_file_read_iter+0x29a/0x420 [420160.782896] xsk_bind+0x152/0x490 [420160.788943] __sys_bind+0xd0/0x100 [420160.795097] ? exit_to_user_mode_prepare+0x20/0x120 [420160.802801] __x64_sys_bind+0x16/0x20 [420160.809298] do_syscall_64+0x38/0x90 [420160.815741] entry_SYSCALL_64_after_hwframe+0x63/0xcd [420160.823731] RIP: 0033:0x7fa86a0dd2fb [420160.830264] Code: c3 66 0f 1f 44 00 00 48 8b 15 69 8b 0c 00 f7 d8 64 89 02 b8 ff ff ff ff eb bc 0f 1f 44 00 00 f3 0f 1e fa b8 31 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 3d 8b 0c 00 f7 d8 64 89 01 48 [420160.855410] RSP: 002b:00007ffc1146f618 EFLAGS: 00000246 ORIG_RAX: 0000000000000031 [420160.866366] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fa86a0dd2fb [420160.876957] RDX: 0000000000000010 RSI: 00007ffc1146f680 RDI: 0000000000000003 [420160.887604] RBP: 000055d7113a0520 R08: 00007fa868fb8000 R09: 0000000080000000 [420160.898293] R10: 0000000000008001 R11: 0000000000000246 R12: 000055d7113a04e0 [420160.909038] R13: 000055d7113a0320 R14: 000000000000000a R15: 0000000000000000 [420160.919817] </TASK> [420160.925659] Modules linked in: ice(OE) af_packet binfmt_misc ---truncated---Show less

In the Linux kernel, the following vulnerability has been resolved: net/mlx5: LAG, fix logic over MLX5_LAG_FLAG_NDEVS_READY Only set MLX5_LAG_FLAG_NDEVS_READY if both netdevices are registered. Doing so guarantees that both ldev->pf[MLX5_LAG_P0].dev and ldev->pf[MLX5_LAG_P1].dev have valid pointers when MLX5_LAG_FLAG_NDEVS_READY is set. The core issue is asymmetry in setting MLX5_LAG_FLAG_NDEVS_READY and clearing it. Setting it is done wrongly when both ldev->pf[MLX5_LAG_P0].dev and ldev->pf[MLX5_LAG_P1].dev are set; clearing it is done right when either of ldev->pf[i].netdev is cleared. Consider the following scenario: 1. PF0 loads and sets ldev->pf[MLX5_LAG_P0].dev to a valid pointer 2. PF1 loads and sets both ldev->pf[MLX5_LAG_P1].dev and ldev->pf[MLX5_LAG_P1].netdev with valid pointers. This results in MLX5_LAG_FLAG_NDEVS_READY is set. 3. PF0 is unloaded before setting dev->pf[MLX5_LAG_P0].netdev. MLX5_LAG_FLAG_NDEVS_READY remains set. Further execution of mlx5_do_bond() will result in null pointer dereference when calling mlx5_lag_is_multipath() This patch fixes the following call trace actually encountered: [ 1293.475195] BUG: kernel NULL pointer dereference, address: 00000000000009a8 [ 1293.478756] #PF: supervisor read access in kernel mode [ 1293.481320] #PF: error_code(0x0000) - not-present page [ 1293.483686] PGD 0 P4D 0 [ 1293.484434] Oops: 0000 [#1] SMP PTI [ 1293.485377] CPU: 1 PID: 23690 Comm: kworker/u16:2 Not tainted 5.18.0-rc5_for_upstream_min_debug_2022_05_05_10_13 #1 [ 1293.488039] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 1293.490836] Workqueue: mlx5_lag mlx5_do_bond_work [mlx5_core] [ 1293.492448] RIP: 0010:mlx5_lag_is_multipath+0x5/0x50 [mlx5_core] [ 1293.494044] Code: e8 70 40 ff e0 48 8b 14 24 48 83 05 5c 1a 1b 00 01 e9 19 ff ff ff 48 83 05 47 1a 1b 00 01 eb d7 0f 1f 44 00 00 0f 1f 44 00 00 <48> 8b 87 a8 09 00 00 48 85 c0 74 26 48 83 05 a7 1b 1b 00 01 41 b8 [ 1293.498673] RSP: 0018:ffff88811b2fbe40 EFLAGS: 00010202 [ 1293.500152] RAX: ffff88818a94e1c0 RBX: ffff888165eca6c0 RCX: 0000000000000000 [ 1293.501841] RDX: 0000000000000001 RSI: ffff88818a94e1c0 RDI: 0000000000000000 [ 1293.503585] RBP: 0000000000000000 R08: ffff888119886740 R09: ffff888165eca73c [ 1293.505286] R10: 0000000000000018 R11: 0000000000000018 R12: ffff88818a94e1c0 [ 1293.506979] R13: ffff888112729800 R14: 0000000000000000 R15: ffff888112729858 [ 1293.508753] FS: 0000000000000000(0000) GS:ffff88852cc40000(0000) knlGS:0000000000000000 [ 1293.510782] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1293.512265] CR2: 00000000000009a8 CR3: 00000001032d4002 CR4: 0000000000370ea0 [ 1293.514001] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1293.515806] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400Show less