Linux

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Avoid divide by zero by initializing dummy pitch to 1 [Why] If the dummy values in `populate_dummy_dml_surface_cfg()` aren't updated then they can lead to a divide by zero in downstream callers like CalculateVMAndRowBytes() [How] Initialize dummy value to a value to avoid divide by zero.Show less

In the Linux kernel, the following vulnerability has been resolved: jfs: fix array-index-out-of-bounds read in add_missing_indices stbl is s8 but it must contain offsets into slot which can go from 0 to 127. Added a bound check for that error and return -EIO if the check fails. Also make jfs_readdir return with error if add_missing_indices returns with an error.Show less

In the Linux kernel, the following vulnerability has been resolved: jfs: Fix null-ptr-deref in jfs_ioc_trim [ Syzkaller Report ] Oops: general protection fault, probably for non-canonical address 0xdffffc0000000087: 0000 [#1 KASAN: null-ptr-deref in range [0x0000000000000438-0x000000000000043f] CPU: 2 UID: 0 PID: 10614 Comm: syz-executor.0 Not tainted 6.13.0-rc6-gfbfd64d25c7a-dirty #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Sched_ext: serialise (enabled+all), task: runnable_at=-30ms RIP: 0010:jfs_ioc_trim+0x34b/0x8f0 Code: e7 e8 59 a4 87 fe 4d 8b 24 24 4d 8d bc 24 38 04 00 00 48 8d 93 90 82 fe ff 4c 89 ff 31 f6 RSP: 0018:ffffc900055f7cd0 EFLAGS: 00010206 RAX: 0000000000000087 RBX: 00005866a9e67ff8 RCX: 000000000000000a RDX: 0000000000000001 RSI: 0000000000000004 RDI: 0000000000000001 RBP: dffffc0000000000 R08: ffff88807c180003 R09: 1ffff1100f830000 R10: dffffc0000000000 R11: ffffed100f830001 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000001 R15: 0000000000000438 FS: 00007fe520225640(0000) GS:ffff8880b7e80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005593c91b2c88 CR3: 000000014927c000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ? __die_body+0x61/0xb0 ? die_addr+0xb1/0xe0 ? exc_general_protection+0x333/0x510 ? asm_exc_general_protection+0x26/0x30 ? jfs_ioc_trim+0x34b/0x8f0 jfs_ioctl+0x3c8/0x4f0 ? __pfx_jfs_ioctl+0x10/0x10 ? __pfx_jfs_ioctl+0x10/0x10 __se_sys_ioctl+0x269/0x350 ? __pfx___se_sys_ioctl+0x10/0x10 ? do_syscall_64+0xfb/0x210 do_syscall_64+0xee/0x210 ? syscall_exit_to_user_mode+0x1e0/0x330 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fe51f4903ad Code: c3 e8 a7 2b 00 00 0f 1f 80 00 00 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d RSP: 002b:00007fe5202250c8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007fe51f5cbf80 RCX: 00007fe51f4903ad RDX: 0000000020000680 RSI: 00000000c0185879 RDI: 0000000000000005 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fe520225640 R13: 000000000000000e R14: 00007fe51f44fca0 R15: 00007fe52021d000 </TASK> Modules linked in: ---[ end trace 0000000000000000 ]--- RIP: 0010:jfs_ioc_trim+0x34b/0x8f0 Code: e7 e8 59 a4 87 fe 4d 8b 24 24 4d 8d bc 24 38 04 00 00 48 8d 93 90 82 fe ff 4c 89 ff 31 f6 RSP: 0018:ffffc900055f7cd0 EFLAGS: 00010206 RAX: 0000000000000087 RBX: 00005866a9e67ff8 RCX: 000000000000000a RDX: 0000000000000001 RSI: 0000000000000004 RDI: 0000000000000001 RBP: dffffc0000000000 R08: ffff88807c180003 R09: 1ffff1100f830000 R10: dffffc0000000000 R11: ffffed100f830001 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000001 R15: 0000000000000438 FS: 00007fe520225640(0000) GS:ffff8880b7e80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005593c91b2c88 CR3: 000000014927c000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Kernel panic - not syncing: Fatal exception [ Analysis ] We believe that we have found a concurrency bug in the `fs/jfs` module that results in a null pointer dereference. There is a closely related issue which has been fixed: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=d6c1b3599b2feb5c7291f5ac3a36e5fa7cedb234 ... but, unfortunately, the accepted patch appears to still be susceptible to a null pointer dereference under some interleavings. To trigger the bug, we think that `JFS_SBI(ipbmap->i_sb)->bmap` is set to NULL in `dbFreeBits` and then dereferenced in `jfs_ioc_trim`. This bug manifests quite rarely under normal circumstances, but is triggereable from a syz-program.Show less

In the Linux kernel, the following vulnerability has been resolved: bpf: Check rcu_read_lock_trace_held() in bpf_map_lookup_percpu_elem() bpf_map_lookup_percpu_elem() helper is also available for sleepable bpf program. When BPF JIT is disabled or under 32-bit host, bpf_map_lookup_percpu_elem() will not be inlined. Using it in a sleepable bpf program will trigger the warning in bpf_map_lookup_percpu_elem(), because the bpf program only holds rcu_read_lock_trace lock. Therefore, add the missed check.Show less

In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_set_pipapo: clamp maximum map bucket size to INT_MAX Otherwise, it is possible to hit WARN_ON_ONCE in __kvmalloc_node_noprof() when resizing hashtable because __GFP_NOWARN is unset. Similar to: b541ba7d1f5a ("netfilter: conntrack: clamp maximum hashtable size to INT_MAX")Show less

In the Linux kernel, the following vulnerability has been resolved: i40e: fix MMIO write access to an invalid page in i40e_clear_hw When the device sends a specific input, an integer underflow can occur, leading to MMIO write access to an invalid page. Prevent the integer underflow by changing the type of related variables.Show less

In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: Fix memory leak due to multiple rx_stats allocation rx_stats for each arsta is allocated when adding a station. arsta->rx_stats will be freed when a station is removed. Redundant allocations are occurring when the same station is added multiple times. This causes ath12k_mac_station_add() to be called multiple times, and rx_stats is allocated each time. As a result there is memory leaks. Prevent multiple allocations of rx_stats when ath12k_mac_station_add() is called repeatedly by checking if rx_stats is already allocated before allocating again. Allocate arsta->rx_stats if arsta->rx_stats is NULL respectively. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3Show less

In the Linux kernel, the following vulnerability has been resolved: fbcon: Make sure modelist not set on unregistered console It looks like attempting to write to the "store_modes" sysfs node will run afoul of unregistered consoles: UBSAN: array-index-out-of-bounds in drivers/video/fbdev/core/fbcon.c:122:28 index -1 is out of range for type 'fb_info *[32]' ... fbcon_info_from_console+0x192/0x1a0 drivers/video/fbdev/core/fbcon.c:122 fbcon_new_modelist+0xbf/0x2d0 drivers/video/fbdev/core/fbcon.c:3048 fb_new_modelist+0x328/0x440 drivers/video/fbdev/core/fbmem.c:673 store_modes+0x1c9/0x3e0 drivers/video/fbdev/core/fbsysfs.c:113 dev_attr_store+0x55/0x80 drivers/base/core.c:2439 static struct fb_info *fbcon_registered_fb[FB_MAX]; ... static signed char con2fb_map[MAX_NR_CONSOLES]; ... static struct fb_info *fbcon_info_from_console(int console) ... return fbcon_registered_fb[con2fb_map[console]]; If con2fb_map contains a -1 things go wrong here. Instead, return NULL, as callers of fbcon_info_from_console() are trying to compare against existing "info" pointers, so error handling should kick in correctly.Show less

In the Linux kernel, the following vulnerability has been resolved: platform/x86: dell_rbu: Fix list usage Pass the correct list head to list_for_each_entry*() when looping through the packet list. Without this patch, reading the packet data via sysfs will show the data incorrectly (because it starts at the wrong packet), and clearing the packet list will result in a NULL pointer dereference.Show less

In the Linux kernel, the following vulnerability has been resolved: io_uring/rsrc: validate buffer count with offset for cloning syzbot reports that it can trigger a WARN_ON() for kmalloc() attempt that's too big: WARNING: CPU: 0 PID: 6488 at mm/slub.c:5024 __kvmalloc_node_noprof+0x520/0x640 mm/slub.c:5024 Modules linked in: CPU: 0 UID: 0 PID: 6488 Comm: syz-executor312 Not tainted 6.15.0-rc7-syzkaller-gd7fa1af5b33e #0 PREEMPT Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025 pstate: 20400005 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : __kvmalloc_node_noprof+0x520/0x640 mm/slub.c:5024 lr : __do_kmalloc_node mm/slub.c:-1 [inline] lr : __kvmalloc_node_noprof+0x3b4/0x640 mm/slub.c:5012 sp : ffff80009cfd7a90 x29: ffff80009cfd7ac0 x28: ffff0000dd52a120 x27: 0000000000412dc0 x26: 0000000000000178 x25: ffff7000139faf70 x24: 0000000000000000 x23: ffff800082f4cea8 x22: 00000000ffffffff x21: 000000010cd004a8 x20: ffff0000d75816c0 x19: ffff0000dd52a000 x18: 00000000ffffffff x17: ffff800092f39000 x16: ffff80008adbe9e4 x15: 0000000000000005 x14: 1ffff000139faf1c x13: 0000000000000000 x12: 0000000000000000 x11: ffff7000139faf21 x10: 0000000000000003 x9 : ffff80008f27b938 x8 : 0000000000000002 x7 : 0000000000000000 x6 : 0000000000000000 x5 : 00000000ffffffff x4 : 0000000000400dc0 x3 : 0000000200000000 x2 : 000000010cd004a8 x1 : ffff80008b3ebc40 x0 : 0000000000000001 Call trace: __kvmalloc_node_noprof+0x520/0x640 mm/slub.c:5024 (P) kvmalloc_array_node_noprof include/linux/slab.h:1065 [inline] io_rsrc_data_alloc io_uring/rsrc.c:206 [inline] io_clone_buffers io_uring/rsrc.c:1178 [inline] io_register_clone_buffers+0x484/0xa14 io_uring/rsrc.c:1287 __io_uring_register io_uring/register.c:815 [inline] __do_sys_io_uring_register io_uring/register.c:926 [inline] __se_sys_io_uring_register io_uring/register.c:903 [inline] __arm64_sys_io_uring_register+0x42c/0xea8 io_uring/register.c:903 __invoke_syscall arch/arm64/kernel/syscall.c:35 [inline] invoke_syscall+0x98/0x2b8 arch/arm64/kernel/syscall.c:49 el0_svc_common+0x130/0x23c arch/arm64/kernel/syscall.c:132 do_el0_svc+0x48/0x58 arch/arm64/kernel/syscall.c:151 el0_svc+0x58/0x17c arch/arm64/kernel/entry-common.c:767 el0t_64_sync_handler+0x78/0x108 arch/arm64/kernel/entry-common.c:786 el0t_64_sync+0x198/0x19c arch/arm64/kernel/entry.S:600 which is due to offset + buffer_count being too large. The registration code checks only the total count of buffers, but given that the indexing is an array, it should also check offset + count. That can't exceed IORING_MAX_REG_BUFFERS either, as there's no way to reach buffers beyond that limit. There's no issue with registrering a table this large, outside of the fact that it's pointless to register buffers that cannot be reached, and that it can trigger this kmalloc() warning for attempting an allocation that is too large.Show less

In the Linux kernel, the following vulnerability has been resolved: LoongArch: Fix panic caused by NULL-PMD in huge_pte_offset() ERROR INFO: CPU 25 Unable to handle kernel paging request at virtual address 0x0 ... Call Trace: [<900000000023c30c>] huge_pte_offset+0x3c/0x58 [<900000000057fd4c>] hugetlb_follow_page_mask+0x74/0x438 [<900000000051fee8>] __get_user_pages+0xe0/0x4c8 [<9000000000522414>] faultin_page_range+0x84/0x380 [<9000000000564e8c>] madvise_vma_behavior+0x534/0xa48 [<900000000056689c>] do_madvise+0x1bc/0x3e8 [<9000000000566df4>] sys_madvise+0x24/0x38 [<90000000015b9e88>] do_syscall+0x78/0x98 [<9000000000221f18>] handle_syscall+0xb8/0x158 In some cases, pmd may be NULL and rely on NULL as the return value for processing, so it is necessary to determine this situation here.Show less

In the Linux kernel, the following vulnerability has been resolved: jffs2: check that raw node were preallocated before writing summary Syzkaller detected a kernel bug in jffs2_link_node_ref, caused by fault injection in jffs2_prealloc_raw_node_refs. jffs2_sum_write_sumnode doesn't check return value of jffs2_prealloc_raw_node_refs and simply lets any error propagate into jffs2_sum_write_data, which eventually calls jffs2_link_node_ref in order to link the summary to an expectedly allocated node. kernel BUG at fs/jffs2/nodelist.c:592! invalid opcode: 0000 [#1] PREEMPT SMP KASAN NOPTI CPU: 1 PID: 31277 Comm: syz-executor.7 Not tainted 6.1.128-syzkaller-00139-ge10f83ca10a1 #0 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014 RIP: 0010:jffs2_link_node_ref+0x570/0x690 fs/jffs2/nodelist.c:592 Call Trace: <TASK> jffs2_sum_write_data fs/jffs2/summary.c:841 [inline] jffs2_sum_write_sumnode+0xd1a/0x1da0 fs/jffs2/summary.c:874 jffs2_do_reserve_space+0xa18/0xd60 fs/jffs2/nodemgmt.c:388 jffs2_reserve_space+0x55f/0xaa0 fs/jffs2/nodemgmt.c:197 jffs2_write_inode_range+0x246/0xb50 fs/jffs2/write.c:362 jffs2_write_end+0x726/0x15d0 fs/jffs2/file.c:301 generic_perform_write+0x314/0x5d0 mm/filemap.c:3856 __generic_file_write_iter+0x2ae/0x4d0 mm/filemap.c:3973 generic_file_write_iter+0xe3/0x350 mm/filemap.c:4005 call_write_iter include/linux/fs.h:2265 [inline] do_iter_readv_writev+0x20f/0x3c0 fs/read_write.c:735 do_iter_write+0x186/0x710 fs/read_write.c:861 vfs_iter_write+0x70/0xa0 fs/read_write.c:902 iter_file_splice_write+0x73b/0xc90 fs/splice.c:685 do_splice_from fs/splice.c:763 [inline] direct_splice_actor+0x10c/0x170 fs/splice.c:950 splice_direct_to_actor+0x337/0xa10 fs/splice.c:896 do_splice_direct+0x1a9/0x280 fs/splice.c:1002 do_sendfile+0xb13/0x12c0 fs/read_write.c:1255 __do_sys_sendfile64 fs/read_write.c:1323 [inline] __se_sys_sendfile64 fs/read_write.c:1309 [inline] __x64_sys_sendfile64+0x1cf/0x210 fs/read_write.c:1309 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x35/0x80 arch/x86/entry/common.c:81 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 Fix this issue by checking return value of jffs2_prealloc_raw_node_refs before calling jffs2_sum_write_data. Found by Linux Verification Center (linuxtesting.org) with Syzkaller.Show less

In the Linux kernel, the following vulnerability has been resolved: net_sched: sch_sfq: reject invalid perturb period Gerrard Tai reported that SFQ perturb_period has no range check yet, and this can be used to trigger a race condition fixed in a separate patch. We want to make sure ctl->perturb_period * HZ will not overflow and is positive. tc qd add dev lo root sfq perturb -10 # negative value : error Error: sch_sfq: invalid perturb period. tc qd add dev lo root sfq perturb 1000000000 # too big : error Error: sch_sfq: invalid perturb period. tc qd add dev lo root sfq perturb 2000000 # acceptable value tc -s -d qd sh dev lo qdisc sfq 8005: root refcnt 2 limit 127p quantum 64Kb depth 127 flows 128 divisor 1024 perturb 2000000sec Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0Show less

In the Linux kernel, the following vulnerability has been resolved: net: clear the dst when changing skb protocol A not-so-careful NAT46 BPF program can crash the kernel if it indiscriminately flips ingress packets from v4 to v6: BUG: kernel NULL pointer dereference, address: 0000000000000000 ip6_rcv_core (net/ipv6/ip6_input.c:190:20) ipv6_rcv (net/ipv6/ip6_input.c:306:8) process_backlog (net/core/dev.c:6186:4) napi_poll (net/core/dev.c:6906:9) net_rx_action (net/core/dev.c:7028:13) do_softirq (kernel/softirq.c:462:3) netif_rx (net/core/dev.c:5326:3) dev_loopback_xmit (net/core/dev.c:4015:2) ip_mc_finish_output (net/ipv4/ip_output.c:363:8) NF_HOOK (./include/linux/netfilter.h:314:9) ip_mc_output (net/ipv4/ip_output.c:400:5) dst_output (./include/net/dst.h:459:9) ip_local_out (net/ipv4/ip_output.c:130:9) ip_send_skb (net/ipv4/ip_output.c:1496:8) udp_send_skb (net/ipv4/udp.c:1040:8) udp_sendmsg (net/ipv4/udp.c:1328:10) The output interface has a 4->6 program attached at ingress. We try to loop the multicast skb back to the sending socket. Ingress BPF runs as part of netif_rx(), pushes a valid v6 hdr and changes skb->protocol to v6. We enter ip6_rcv_core which tries to use skb_dst(). But the dst is still an IPv4 one left after IPv4 mcast output. Clear the dst in all BPF helpers which change the protocol. Try to preserve metadata dsts, those may carry non-routing metadata.Show less

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix null pointer dereference in destroy_previous_session If client set ->PreviousSessionId on kerberos session setup stage, NULL pointer dereference error will happen. Since sess->user is not set yet, It can pass the user argument as NULL to destroy_previous_session. sess->user will be set in ksmbd_krb5_authenticate(). So this patch move calling destroy_previous_session() after ksmbd_krb5_authenticate().Show less

In the Linux kernel, the following vulnerability has been resolved: atm: Revert atm_account_tx() if copy_from_iter_full() fails. In vcc_sendmsg(), we account skb->truesize to sk->sk_wmem_alloc by atm_account_tx(). It is expected to be reverted by atm_pop_raw() later called by vcc->dev->ops->send(vcc, skb). However, vcc_sendmsg() misses the same revert when copy_from_iter_full() fails, and then we will leak a socket. Let's factorise the revert part as atm_return_tx() and call it in the failure path. Note that the corresponding sk_wmem_alloc operation can be found in alloc_tx() as of the blamed commit. $ git blame -L:alloc_tx net/atm/common.c c55fa3cccbc2c~Show less

In the Linux kernel, the following vulnerability has been resolved: drm/v3d: Avoid NULL pointer dereference in `v3d_job_update_stats()` The following kernel Oops was recently reported by Mesa CI: [ 800.139824] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000588 [ 800.148619] Mem abort info: [ 800.151402] ESR = 0x0000000096000005 [ 800.155141] EC = 0x25: DABT (current EL), IL = 32 bits [ 800.160444] SET = 0, FnV = 0 [ 800.163488] EA = 0, S1PTW = 0 [ 800.166619] FSC = 0x05: level 1 translation fault [ 800.171487] Data abort info: [ 800.174357] ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000 [ 800.179832] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 800.184873] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 800.190176] user pgtable: 4k pages, 39-bit VAs, pgdp=00000001014c2000 [ 800.196607] [0000000000000588] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 [ 800.205305] Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP [ 800.211564] Modules linked in: vc4 snd_soc_hdmi_codec drm_display_helper v3d cec gpu_sched drm_dma_helper drm_shmem_helper drm_kms_helper drm drm_panel_orientation_quirks snd_soc_core snd_compress snd_pcm_dmaengine snd_pcm i2c_brcmstb snd_timer snd backlight [ 800.234448] CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.12.25+rpt-rpi-v8 #1 Debian 1:6.12.25-1+rpt1 [ 800.244182] Hardware name: Raspberry Pi 4 Model B Rev 1.4 (DT) [ 800.250005] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 800.256959] pc : v3d_job_update_stats+0x60/0x130 [v3d] [ 800.262112] lr : v3d_job_update_stats+0x48/0x130 [v3d] [ 800.267251] sp : ffffffc080003e60 [ 800.270555] x29: ffffffc080003e60 x28: ffffffd842784980 x27: 0224012000000000 [ 800.277687] x26: ffffffd84277f630 x25: ffffff81012fd800 x24: 0000000000000020 [ 800.284818] x23: ffffff8040238b08 x22: 0000000000000570 x21: 0000000000000158 [ 800.291948] x20: 0000000000000000 x19: ffffff8040238000 x18: 0000000000000000 [ 800.299078] x17: ffffffa8c1bd2000 x16: ffffffc080000000 x15: 0000000000000000 [ 800.306208] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 [ 800.313338] x11: 0000000000000040 x10: 0000000000001a40 x9 : ffffffd83b39757c [ 800.320468] x8 : ffffffd842786420 x7 : 7fffffffffffffff x6 : 0000000000ef32b0 [ 800.327598] x5 : 00ffffffffffffff x4 : 0000000000000015 x3 : ffffffd842784980 [ 800.334728] x2 : 0000000000000004 x1 : 0000000000010002 x0 : 000000ba4c0ca382 [ 800.341859] Call trace: [ 800.344294] v3d_job_update_stats+0x60/0x130 [v3d] [ 800.349086] v3d_irq+0x124/0x2e0 [v3d] [ 800.352835] __handle_irq_event_percpu+0x58/0x218 [ 800.357539] handle_irq_event+0x54/0xb8 [ 800.361369] handle_fasteoi_irq+0xac/0x240 [ 800.365458] handle_irq_desc+0x48/0x68 [ 800.369200] generic_handle_domain_irq+0x24/0x38 [ 800.373810] gic_handle_irq+0x48/0xd8 [ 800.377464] call_on_irq_stack+0x24/0x58 [ 800.381379] do_interrupt_handler+0x88/0x98 [ 800.385554] el1_interrupt+0x34/0x68 [ 800.389123] el1h_64_irq_handler+0x18/0x28 [ 800.393211] el1h_64_irq+0x64/0x68 [ 800.396603] default_idle_call+0x3c/0x168 [ 800.400606] do_idle+0x1fc/0x230 [ 800.403827] cpu_startup_entry+0x40/0x50 [ 800.407742] rest_init+0xe4/0xf0 [ 800.410962] start_kernel+0x5e8/0x790 [ 800.414616] __primary_switched+0x80/0x90 [ 800.418622] Code: 8b170277 8b160296 11000421 b9000861 (b9401ac1) [ 800.424707] ---[ end trace 0000000000000000 ]--- [ 800.457313] ---[ end Kernel panic - not syncing: Oops: Fatal exception in interrupt ]--- This issue happens when the file descriptor is closed before the jobs submitted by it are completed. When the job completes, we update the global GPU stats and the per-fd GPU stats, which are exposed through fdinfo. If the file descriptor was closed, then the struct `v3d_file_priv` and its stats were already freed and we can't update the per-fd stats. Therefore, if the file descriptor was already closed, don't u ---truncated---Show less

In the Linux kernel, the following vulnerability has been resolved: drm/msm/a7xx: Call CP_RESET_CONTEXT_STATE Calling this packet is necessary when we switch contexts because there are various pieces of state used by userspace to synchronize between BR and BV that are persistent across submits and we need to make sure that they are in a "safe" state when switching contexts. Otherwise a userspace submission in one context could cause another context to function incorrectly and hang, effectively a denial of service (although without leaking data). This was missed during initial a7xx bringup. Patchwork: https://patchwork.freedesktop.org/patch/654924/Show less

In the Linux kernel, the following vulnerability has been resolved: drm/nouveau: fix a use-after-free in r535_gsp_rpc_push() The RPC container is released after being passed to r535_gsp_rpc_send(). When sending the initial fragment of a large RPC and passing the caller's RPC container, the container will be freed prematurely. Subsequent attempts to send remaining fragments will therefore result in a use-after-free. Allocate a temporary RPC container for holding the initial fragment of a large RPC when sending. Free the caller's container when all fragments are successfully sent. [ Rebase onto Blackwell changes. - Danilo ]Show less

In the Linux kernel, the following vulnerability has been resolved: bnxt_en: Fix double invocation of bnxt_ulp_stop()/bnxt_ulp_start() Before the commit under the Fixes tag below, bnxt_ulp_stop() and bnxt_ulp_start() were always invoked in pairs. After that commit, the new bnxt_ulp_restart() can be invoked after bnxt_ulp_stop() has been called. This may result in the RoCE driver's aux driver .suspend() method being invoked twice. The 2nd bnxt_re_suspend() call will crash when it dereferences a NULL pointer: (NULL ib_device): Handle device suspend call BUG: kernel NULL pointer dereference, address: 0000000000000b78 PGD 0 P4D 0 Oops: Oops: 0000 [#1] SMP PTI CPU: 20 UID: 0 PID: 181 Comm: kworker/u96:5 Tainted: G S 6.15.0-rc1 #4 PREEMPT(voluntary) Tainted: [S]=CPU_OUT_OF_SPEC Hardware name: Dell Inc. PowerEdge R730/072T6D, BIOS 2.4.3 01/17/2017 Workqueue: bnxt_pf_wq bnxt_sp_task [bnxt_en] RIP: 0010:bnxt_re_suspend+0x45/0x1f0 [bnxt_re] Code: 8b 05 a7 3c 5b f5 48 89 44 24 18 31 c0 49 8b 5c 24 08 4d 8b 2c 24 e8 ea 06 0a f4 48 c7 c6 04 60 52 c0 48 89 df e8 1b ce f9 ff <48> 8b 83 78 0b 00 00 48 8b 80 38 03 00 00 a8 40 0f 85 b5 00 00 00 RSP: 0018:ffffa2e84084fd88 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000001 RDX: 0000000000000000 RSI: ffffffffb4b6b934 RDI: 00000000ffffffff RBP: ffffa1760954c9c0 R08: 0000000000000000 R09: c0000000ffffdfff R10: 0000000000000001 R11: ffffa2e84084fb50 R12: ffffa176031ef070 R13: ffffa17609775000 R14: ffffa17603adc180 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffffa17daa397000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000b78 CR3: 00000004aaa30003 CR4: 00000000003706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> bnxt_ulp_stop+0x69/0x90 [bnxt_en] bnxt_sp_task+0x678/0x920 [bnxt_en] ? __schedule+0x514/0xf50 process_scheduled_works+0x9d/0x400 worker_thread+0x11c/0x260 ? __pfx_worker_thread+0x10/0x10 kthread+0xfe/0x1e0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x2b/0x40 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 Check the BNXT_EN_FLAG_ULP_STOPPED flag and do not proceed if the flag is already set. This will preserve the original symmetrical bnxt_ulp_stop() and bnxt_ulp_start(). Also, inside bnxt_ulp_start(), clear the BNXT_EN_FLAG_ULP_STOPPED flag after taking the mutex to avoid any race condition. And for symmetry, only proceed in bnxt_ulp_start() if the BNXT_EN_FLAG_ULP_STOPPED is set.Show less