Linux

In the Linux kernel, the following vulnerability has been resolved: ACPICA: fix acpi parse and parseext cache leaks ACPICA commit 8829e70e1360c81e7a5a901b5d4f48330e021ea5 I'm Seunghun Han, and I work for National Security Research Institute of South Korea. I have been doing a research on ACPI and found an ACPI cache leak in ACPI early abort cases. Boot log of ACPI cache leak is as follows: [ 0.352414] ACPI: Added _OSI(Module Device) [ 0.353182] ACPI: Added _OSI(Processor Device) [ 0.353182] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.353182] ACPI: Added _OSI(Processor Aggregator Device) [ 0.356028] ACPI: Unable to start the ACPI Interpreter [ 0.356799] ACPI Error: Could not remove SCI handler (20170303/evmisc-281) [ 0.360215] kmem_cache_destroy Acpi-State: Slab cache still has objects [ 0.360648] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 4.12.0-rc4-next-20170608+ #10 [ 0.361273] Hardware name: innotek gmb_h virtual_box/virtual_box, BIOS virtual_box 12/01/2006 [ 0.361873] Call Trace: [ 0.362243] ? dump_stack+0x5c/0x81 [ 0.362591] ? kmem_cache_destroy+0x1aa/0x1c0 [ 0.362944] ? acpi_sleep_proc_init+0x27/0x27 [ 0.363296] ? acpi_os_delete_cache+0xa/0x10 [ 0.363646] ? acpi_ut_delete_caches+0x6d/0x7b [ 0.364000] ? acpi_terminate+0xa/0x14 [ 0.364000] ? acpi_init+0x2af/0x34f [ 0.364000] ? __class_create+0x4c/0x80 [ 0.364000] ? video_setup+0x7f/0x7f [ 0.364000] ? acpi_sleep_proc_init+0x27/0x27 [ 0.364000] ? do_one_initcall+0x4e/0x1a0 [ 0.364000] ? kernel_init_freeable+0x189/0x20a [ 0.364000] ? rest_init+0xc0/0xc0 [ 0.364000] ? kernel_init+0xa/0x100 [ 0.364000] ? ret_from_fork+0x25/0x30 I analyzed this memory leak in detail. I found that “Acpi-State” cache and “Acpi-Parse” cache were merged because the size of cache objects was same slab cache size. I finally found “Acpi-Parse” cache and “Acpi-parse_ext” cache were leaked using SLAB_NEVER_MERGE flag in kmem_cache_create() function. Real ACPI cache leak point is as follows: [ 0.360101] ACPI: Added _OSI(Module Device) [ 0.360101] ACPI: Added _OSI(Processor Device) [ 0.360101] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.361043] ACPI: Added _OSI(Processor Aggregator Device) [ 0.364016] ACPI: Unable to start the ACPI Interpreter [ 0.365061] ACPI Error: Could not remove SCI handler (20170303/evmisc-281) [ 0.368174] kmem_cache_destroy Acpi-Parse: Slab cache still has objects [ 0.369332] CPU: 1 PID: 1 Comm: swapper/0 Tainted: G W 4.12.0-rc4-next-20170608+ #8 [ 0.371256] Hardware name: innotek gmb_h virtual_box/virtual_box, BIOS virtual_box 12/01/2006 [ 0.372000] Call Trace: [ 0.372000] ? dump_stack+0x5c/0x81 [ 0.372000] ? kmem_cache_destroy+0x1aa/0x1c0 [ 0.372000] ? acpi_sleep_proc_init+0x27/0x27 [ 0.372000] ? acpi_os_delete_cache+0xa/0x10 [ 0.372000] ? acpi_ut_delete_caches+0x56/0x7b [ 0.372000] ? acpi_terminate+0xa/0x14 [ 0.372000] ? acpi_init+0x2af/0x34f [ 0.372000] ? __class_create+0x4c/0x80 [ 0.372000] ? video_setup+0x7f/0x7f [ 0.372000] ? acpi_sleep_proc_init+0x27/0x27 [ 0.372000] ? do_one_initcall+0x4e/0x1a0 [ 0.372000] ? kernel_init_freeable+0x189/0x20a [ 0.372000] ? rest_init+0xc0/0xc0 [ 0.372000] ? kernel_init+0xa/0x100 [ 0.372000] ? ret_from_fork+0x25/0x30 [ 0.388039] kmem_cache_destroy Acpi-parse_ext: Slab cache still has objects [ 0.389063] CPU: 1 PID: 1 Comm: swapper/0 Tainted: G W 4.12.0-rc4-next-20170608+ #8 [ 0.390557] Hardware name: innotek gmb_h virtual_box/virtual_box, BIOS virtual_box 12/01/2006 [ 0.392000] Call Trace: [ 0.392000] ? dump_stack+0x5c/0x81 [ 0.392000] ? kmem_cache_destroy+0x1aa/0x1c0 [ 0.392000] ? acpi_sleep_proc_init+0x27/0x27 [ 0.392000] ? acpi_os_delete_cache+0xa/0x10 [ 0.392000] ? acpi_ut_delete_caches+0x6d/0x7b [ 0.392000] ? acpi_terminate+0xa/0x14 [ 0.392000] ? acpi_init+0x2af/0x3 ---truncated---Show less

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7996: drop fragments with multicast or broadcast RA IEEE 802.11 fragmentation can only be applied to unicast frames. Therefore, drop fragments with multicast or broadcast RA. This patch addresses vulnerabilities such as CVE-2020-26145.Show less

In the Linux kernel, the following vulnerability has been resolved: software node: Correct a OOB check in software_node_get_reference_args() software_node_get_reference_args() wants to get @index-th element, so the property value requires at least '(index + 1) * sizeof(*ref)' bytes but that can not be guaranteed by current OOB check, and may cause OOB for malformed property. Fix by using as OOB check '((index + 1) * sizeof(*ref) > prop->length)'.Show less

In the Linux kernel, the following vulnerability has been resolved: eth: fbnic: avoid double free when failing to DMA-map FW msg The semantics are that caller of fbnic_mbx_map_msg() retains the ownership of the message on error. All existing callers dutifully free the page.Show less

In the Linux kernel, the following vulnerability has been resolved: firmware: cs_dsp: Fix OOB memory read access in KUnit test KASAN reported out of bounds access - cs_dsp_mock_bin_add_name_or_info(), because the source string length was rounded up to the allocation size.Show less

In the Linux kernel, the following vulnerability has been resolved: powerpc/bpf: fix JIT code size calculation of bpf trampoline arch_bpf_trampoline_size() provides JIT size of the BPF trampoline before the buffer for JIT'ing it is allocated. The total number of instructions emitted for BPF trampoline JIT code depends on where the final image is located. So, the size arrived at with the dummy pass in arch_bpf_trampoline_size() can vary from the actual size needed in arch_prepare_bpf_trampoline(). When the instructions accounted in arch_bpf_trampoline_size() is less than the number of instructions emitted during the actual JIT compile of the trampoline, the below warning is produced: WARNING: CPU: 8 PID: 204190 at arch/powerpc/net/bpf_jit_comp.c:981 __arch_prepare_bpf_trampoline.isra.0+0xd2c/0xdcc which is: /* Make sure the trampoline generation logic doesn't overflow */ if (image && WARN_ON_ONCE(&image[ctx->idx] > (u32 *)rw_image_end - BPF_INSN_SAFETY)) { So, during the dummy pass, instead of providing some arbitrary image location, account for maximum possible instructions if and when there is a dependency with image location for JIT'ing.Show less

In the Linux kernel, the following vulnerability has been resolved: fs/nfs/read: fix double-unlock bug in nfs_return_empty_folio() Sometimes, when a file was read while it was being truncated by another NFS client, the kernel could deadlock because folio_unlock() was called twice, and the second call would XOR back the `PG_locked` flag. Most of the time (depending on the timing of the truncation), nobody notices the problem because folio_unlock() gets called three times, which flips `PG_locked` back off: 1. vfs_read, nfs_read_folio, ... nfs_read_add_folio, nfs_return_empty_folio 2. vfs_read, nfs_read_folio, ... netfs_read_collection, netfs_unlock_abandoned_read_pages 3. vfs_read, ... nfs_do_read_folio, nfs_read_add_folio, nfs_return_empty_folio The problem is that nfs_read_add_folio() is not supposed to unlock the folio if fscache is enabled, and a nfs_netfs_folio_unlock() check is missing in nfs_return_empty_folio(). Rarely this leads to a warning in netfs_read_collection(): ------------[ cut here ]------------ R=0000031c: folio 10 is not locked WARNING: CPU: 0 PID: 29 at fs/netfs/read_collect.c:133 netfs_read_collection+0x7c0/0xf00 [...] Workqueue: events_unbound netfs_read_collection_worker RIP: 0010:netfs_read_collection+0x7c0/0xf00 [...] Call Trace: <TASK> netfs_read_collection_worker+0x67/0x80 process_one_work+0x12e/0x2c0 worker_thread+0x295/0x3a0 Most of the time, however, processes just get stuck forever in folio_wait_bit_common(), waiting for `PG_locked` to disappear, which never happens because nobody is really holding the folio lock.Show less

In the Linux kernel, the following vulnerability has been resolved: jbd2: fix data-race and null-ptr-deref in jbd2_journal_dirty_metadata() Since handle->h_transaction may be a NULL pointer, so we should change it to call is_handle_aborted(handle) first before dereferencing it. And the following data-race was reported in my fuzzer: ================================================================== BUG: KCSAN: data-race in jbd2_journal_dirty_metadata / jbd2_journal_dirty_metadata write to 0xffff888011024104 of 4 bytes by task 10881 on cpu 1: jbd2_journal_dirty_metadata+0x2a5/0x770 fs/jbd2/transaction.c:1556 __ext4_handle_dirty_metadata+0xe7/0x4b0 fs/ext4/ext4_jbd2.c:358 ext4_do_update_inode fs/ext4/inode.c:5220 [inline] ext4_mark_iloc_dirty+0x32c/0xd50 fs/ext4/inode.c:5869 __ext4_mark_inode_dirty+0xe1/0x450 fs/ext4/inode.c:6074 ext4_dirty_inode+0x98/0xc0 fs/ext4/inode.c:6103 .... read to 0xffff888011024104 of 4 bytes by task 10880 on cpu 0: jbd2_journal_dirty_metadata+0xf2/0x770 fs/jbd2/transaction.c:1512 __ext4_handle_dirty_metadata+0xe7/0x4b0 fs/ext4/ext4_jbd2.c:358 ext4_do_update_inode fs/ext4/inode.c:5220 [inline] ext4_mark_iloc_dirty+0x32c/0xd50 fs/ext4/inode.c:5869 __ext4_mark_inode_dirty+0xe1/0x450 fs/ext4/inode.c:6074 ext4_dirty_inode+0x98/0xc0 fs/ext4/inode.c:6103 .... value changed: 0x00000000 -> 0x00000001 ================================================================== This issue is caused by missing data-race annotation for jh->b_modified. Therefore, the missing annotation needs to be added.Show less

In the Linux kernel, the following vulnerability has been resolved: ata: pata_via: Force PIO for ATAPI devices on VT6415/VT6330 The controller has a hardware bug that can hard hang the system when doing ATAPI DMAs without any trace of what happened. Depending on the device attached, it can also prevent the system from booting. In this case, the system hangs when reading the ATIP from optical media with cdrecord -vvv -atip on an _NEC DVD_RW ND-4571A 1-01 and an Optiarc DVD RW AD-7200A 1.06 attached to an ASRock 990FX Extreme 4, running at UDMA/33. The issue can be reproduced by running the same command with a cygwin build of cdrecord on WinXP, although it requires more attempts to cause it. The hang in that case is also resolved by forcing PIO. It doesn't appear that VIA has produced any drivers for that OS, thus no known workaround exists. HDDs attached to the controller do not suffer from any DMA issues.Show less

In the Linux kernel, the following vulnerability has been resolved: Input: gpio-keys - fix a sleep while atomic with PREEMPT_RT When enabling PREEMPT_RT, the gpio_keys_irq_timer() callback runs in hard irq context, but the input_event() takes a spin_lock, which isn't allowed there as it is converted to a rt_spin_lock(). [ 4054.289999] BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48 [ 4054.290028] in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 0, name: swapper/0 ... [ 4054.290195] __might_resched+0x13c/0x1f4 [ 4054.290209] rt_spin_lock+0x54/0x11c [ 4054.290219] input_event+0x48/0x80 [ 4054.290230] gpio_keys_irq_timer+0x4c/0x78 [ 4054.290243] __hrtimer_run_queues+0x1a4/0x438 [ 4054.290257] hrtimer_interrupt+0xe4/0x240 [ 4054.290269] arch_timer_handler_phys+0x2c/0x44 [ 4054.290283] handle_percpu_devid_irq+0x8c/0x14c [ 4054.290297] handle_irq_desc+0x40/0x58 [ 4054.290307] generic_handle_domain_irq+0x1c/0x28 [ 4054.290316] gic_handle_irq+0x44/0xcc Considering the gpio_keys_irq_isr() can run in any context, e.g. it can be threaded, it seems there's no point in requesting the timer isr to run in hard irq context. Relax the hrtimer not to use the hard context.Show less

In the Linux kernel, the following vulnerability has been resolved: x86/sgx: Prevent attempts to reclaim poisoned pages TL;DR: SGX page reclaim touches the page to copy its contents to secondary storage. SGX instructions do not gracefully handle machine checks. Despite this, the existing SGX code will try to reclaim pages that it _knows_ are poisoned. Avoid even trying to reclaim poisoned pages. The longer story: Pages used by an enclave only get epc_page->poison set in arch_memory_failure() but they currently stay on sgx_active_page_list until sgx_encl_release(), with the SGX_EPC_PAGE_RECLAIMER_TRACKED flag untouched. epc_page->poison is not checked in the reclaimer logic meaning that, if other conditions are met, an attempt will be made to reclaim an EPC page that was poisoned. This is bad because 1. we don't want that page to end up added to another enclave and 2. it is likely to cause one core to shut down and the kernel to panic. Specifically, reclaiming uses microcode operations including "EWB" which accesses the EPC page contents to encrypt and write them out to non-SGX memory. Those operations cannot handle MCEs in their accesses other than by putting the executing core into a special shutdown state (affecting both threads with HT.) The kernel will subsequently panic on the remaining cores seeing the core didn't enter MCE handler(s) in time. Call sgx_unmark_page_reclaimable() to remove the affected EPC page from sgx_active_page_list on memory error to stop it being considered for reclaiming. Testing epc_page->poison in sgx_reclaim_pages() would also work but I assume it's better to add code in the less likely paths. The affected EPC page is not added to &node->sgx_poison_page_list until later in sgx_encl_release()->sgx_free_epc_page() when it is EREMOVEd. Membership on other lists doesn't change to avoid changing any of the lists' semantics except for sgx_active_page_list. There's a "TBD" comment in arch_memory_failure() about pre-emptive actions, the goal here is not to address everything that it may imply. This also doesn't completely close the time window when a memory error notification will be fatal (for a not previously poisoned EPC page) -- the MCE can happen after sgx_reclaim_pages() has selected its candidates or even *inside* a microcode operation (actually easy to trigger due to the amount of time spent in them.) The spinlock in sgx_unmark_page_reclaimable() is safe because memory_failure() runs in process context and no spinlocks are held, explicitly noted in a mm/memory-failure.c comment.Show less

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to bail out in get_new_segment() ------------[ cut here ]------------ WARNING: CPU: 3 PID: 579 at fs/f2fs/segment.c:2832 new_curseg+0x5e8/0x6dc pc : new_curseg+0x5e8/0x6dc Call trace: new_curseg+0x5e8/0x6dc f2fs_allocate_data_block+0xa54/0xe28 do_write_page+0x6c/0x194 f2fs_do_write_node_page+0x38/0x78 __write_node_page+0x248/0x6d4 f2fs_sync_node_pages+0x524/0x72c f2fs_write_checkpoint+0x4bc/0x9b0 __checkpoint_and_complete_reqs+0x80/0x244 issue_checkpoint_thread+0x8c/0xec kthread+0x114/0x1bc ret_from_fork+0x10/0x20 get_new_segment() detects inconsistent status in between free_segmap and free_secmap, let's record such error into super block, and bail out get_new_segment() instead of continue using the segment.Show less

In the Linux kernel, the following vulnerability has been resolved: scsi: lpfc: Use memcpy() for BIOS version The strlcat() with FORTIFY support is triggering a panic because it thinks the target buffer will overflow although the correct target buffer size is passed in. Anyway, instead of memset() with 0 followed by a strlcat(), just use memcpy() and ensure that the resulting buffer is NULL terminated. BIOSVersion is only used for the lpfc_printf_log() which expects a properly terminated string.Show less

In the Linux kernel, the following vulnerability has been resolved: net: ethernet: cortina: Use TOE/TSO on all TCP It is desireable to push the hardware accelerator to also process non-segmented TCP frames: we pass the skb->len to the "TOE/TSO" offloader and it will handle them. Without this quirk the driver becomes unstable and lock up and and crash. I do not know exactly why, but it is probably due to the TOE (TCP offload engine) feature that is coupled with the segmentation feature - it is not possible to turn one part off and not the other, either both TOE and TSO are active, or neither of them. Not having the TOE part active seems detrimental, as if that hardware feature is not really supposed to be turned off. The datasheet says: "Based on packet parsing and TCP connection/NAT table lookup results, the NetEngine puts the packets belonging to the same TCP connection to the same queue for the software to process. The NetEngine puts incoming packets to the buffer or series of buffers for a jumbo packet. With this hardware acceleration, IP/TCP header parsing, checksum validation and connection lookup are offloaded from the software processing." After numerous tests with the hardware locking up after something between minutes and hours depending on load using iperf3 I have concluded this is necessary to stabilize the hardware.Show less

In the Linux kernel, the following vulnerability has been resolved: firmware: cs_dsp: Fix OOB memory read access in KUnit test (ctl cache) KASAN reported out of bounds access - cs_dsp_ctl_cache_init_multiple_offsets(). The code uses mock_coeff_template.length_bytes (4 bytes) for register value allocations. But later, this length is set to 8 bytes which causes test code failures. As fix, just remove the lenght override, keeping the original value 4 for all operations.Show less

In the Linux kernel, the following vulnerability has been resolved: firmware: cs_dsp: Fix OOB memory read access in KUnit test (wmfw info) KASAN reported out of bounds access - cs_dsp_mock_wmfw_add_info(), because the source string length was rounded up to the allocation size.Show less

In the Linux kernel, the following vulnerability has been resolved: jffs2: check jffs2_prealloc_raw_node_refs() result in few other places Fuzzing hit another invalid pointer dereference due to the lack of checking whether jffs2_prealloc_raw_node_refs() completed successfully. Subsequent logic implies that the node refs have been allocated. Handle that. The code is ready for propagating the error upwards. KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] CPU: 1 PID: 5835 Comm: syz-executor145 Not tainted 5.10.234-syzkaller #0 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014 RIP: 0010:jffs2_link_node_ref+0xac/0x690 fs/jffs2/nodelist.c:600 Call Trace: jffs2_mark_erased_block fs/jffs2/erase.c:460 [inline] jffs2_erase_pending_blocks+0x688/0x1860 fs/jffs2/erase.c:118 jffs2_garbage_collect_pass+0x638/0x1a00 fs/jffs2/gc.c:253 jffs2_reserve_space+0x3f4/0xad0 fs/jffs2/nodemgmt.c:167 jffs2_write_inode_range+0x246/0xb50 fs/jffs2/write.c:362 jffs2_write_end+0x712/0x1110 fs/jffs2/file.c:302 generic_perform_write+0x2c2/0x500 mm/filemap.c:3347 __generic_file_write_iter+0x252/0x610 mm/filemap.c:3465 generic_file_write_iter+0xdb/0x230 mm/filemap.c:3497 call_write_iter include/linux/fs.h:2039 [inline] do_iter_readv_writev+0x46d/0x750 fs/read_write.c:740 do_iter_write+0x18c/0x710 fs/read_write.c:866 vfs_writev+0x1db/0x6a0 fs/read_write.c:939 do_pwritev fs/read_write.c:1036 [inline] __do_sys_pwritev fs/read_write.c:1083 [inline] __se_sys_pwritev fs/read_write.c:1078 [inline] __x64_sys_pwritev+0x235/0x310 fs/read_write.c:1078 do_syscall_64+0x30/0x40 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x67/0xd1 Found by Linux Verification Center (linuxtesting.org) with Syzkaller.Show less

In the Linux kernel, the following vulnerability has been resolved: fgraph: Do not enable function_graph tracer when setting funcgraph-args When setting the funcgraph-args option when function graph tracer is net enabled, it incorrectly enables it. Worse, it unregisters itself when it was never registered. Then when it gets enabled again, it will register itself a second time causing a WARNing. ~# echo 1 > /sys/kernel/tracing/options/funcgraph-args ~# head -20 /sys/kernel/tracing/trace # tracer: nop # # entries-in-buffer/entries-written: 813/26317372 #P:8 # # _-----=> irqs-off/BH-disabled # / _----=> need-resched # | / _---=> hardirq/softirq # || / _--=> preempt-depth # ||| / _-=> migrate-disable # |||| / delay # TASK-PID CPU# ||||| TIMESTAMP FUNCTION # | | | ||||| | | <idle>-0 [007] d..4. 358.966010: 7) 1.692 us | fetch_next_timer_interrupt(basej=4294981640, basem=357956000000, base_local=0xffff88823c3ae040, base_global=0xffff88823c3af300, tevt=0xffff888100e47cb8); <idle>-0 [007] d..4. 358.966012: 7) | tmigr_cpu_deactivate(nextexp=357988000000) { <idle>-0 [007] d..4. 358.966013: 7) | _raw_spin_lock(lock=0xffff88823c3b2320) { <idle>-0 [007] d..4. 358.966014: 7) 0.981 us | preempt_count_add(val=1); <idle>-0 [007] d..5. 358.966017: 7) 1.058 us | do_raw_spin_lock(lock=0xffff88823c3b2320); <idle>-0 [007] d..4. 358.966019: 7) 5.824 us | } <idle>-0 [007] d..5. 358.966021: 7) | tmigr_inactive_up(group=0xffff888100cb9000, child=0x0, data=0xffff888100e47bc0) { <idle>-0 [007] d..5. 358.966022: 7) | tmigr_update_events(group=0xffff888100cb9000, child=0x0, data=0xffff888100e47bc0) { Notice the "tracer: nop" at the top there. The current tracer is the "nop" tracer, but the content is obviously the function graph tracer. Enabling function graph tracing will cause it to register again and trigger a warning in the accounting: ~# echo function_graph > /sys/kernel/tracing/current_tracer -bash: echo: write error: Device or resource busy With the dmesg of: ------------[ cut here ]------------ WARNING: CPU: 7 PID: 1095 at kernel/trace/ftrace.c:3509 ftrace_startup_subops+0xc1e/0x1000 Modules linked in: kvm_intel kvm irqbypass CPU: 7 UID: 0 PID: 1095 Comm: bash Not tainted 6.16.0-rc2-test-00006-gea03de4105d3 #24 PREEMPT Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 RIP: 0010:ftrace_startup_subops+0xc1e/0x1000 Code: 48 b8 22 01 00 00 00 00 ad de 49 89 84 24 88 01 00 00 8b 44 24 08 89 04 24 e9 c3 f7 ff ff c7 04 24 ed ff ff ff e9 b7 f7 ff ff <0f> 0b c7 04 24 f0 ff ff ff e9 a9 f7 ff ff c7 04 24 f4 ff ff ff e9 RSP: 0018:ffff888133cff948 EFLAGS: 00010202 RAX: 0000000000000001 RBX: 1ffff1102679ff31 RCX: 0000000000000000 RDX: 1ffffffff0b27a60 RSI: ffffffff8593d2f0 RDI: ffffffff85941140 RBP: 00000000000c2041 R08: ffffffffffffffff R09: ffffed1020240221 R10: ffff88810120110f R11: ffffed1020240214 R12: ffffffff8593d2f0 R13: ffffffff8593d300 R14: ffffffff85941140 R15: ffffffff85631100 FS: 00007f7ec6f28740(0000) GS:ffff8882b5251000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f7ec6f181c0 CR3: 000000012f1d0005 CR4: 0000000000172ef0 Call Trace: <TASK> ? __pfx_ftrace_startup_subops+0x10/0x10 ? find_held_lock+0x2b/0x80 ? ftrace_stub_direct_tramp+0x10/0x10 ? ftrace_stub_direct_tramp+0x10/0x10 ? trace_preempt_on+0xd0/0x110 ? __pfx_trace_graph_entry_args+0x10/ ---truncated---Show less

In the Linux kernel, the following vulnerability has been resolved: aoe: clean device rq_list in aoedev_downdev() An aoe device's rq_list contains accepted block requests that are waiting to be transmitted to the aoe target. This queue was added as part of the conversion to blk_mq. However, the queue was not cleaned out when an aoe device is downed which caused blk_mq_freeze_queue() to sleep indefinitely waiting for those requests to complete, causing a hang. This fix cleans out the queue before calling blk_mq_freeze_queue().Show less

In the Linux kernel, the following vulnerability has been resolved: ksmbd: add free_transport ops in ksmbd connection free_transport function for tcp connection can be called from smbdirect. It will cause kernel oops. This patch add free_transport ops in ksmbd connection, and add each free_transports for tcp and smbdirect.Show less