Linux

In the Linux kernel, the following vulnerability has been resolved: RDMA/irdma: Initialize free_qp completion before using it In irdma_create_qp, if ib_copy_to_udata fails, it will call irdma_destroy_qp to clean up which will attempt to wait on the free_qp completion, which is not initialized yet. Fix this by initializing the completion before the ib_copy_to_udata call.Show less

In the Linux kernel, the following vulnerability has been resolved: RDMA/irdma: Harden depth calculation functions An issue was exposed where OS can pass in U32_MAX for SQ/RQ/SRQ size. This can cause integer overflow and truncation of SQ/RQ/SRQ depth returning a success when it should have failed. Harden the functions to do all depth calculations and boundary checking in u64 sizes.Show less

In the Linux kernel, the following vulnerability has been resolved: drm/xe/pf: Fix use-after-free in migration restore When an error is returned from xe_sriov_pf_migration_restore_produce(), the data pointer is not set to NULL, which can trigger use-after-free in subsequent .write() calls. Set the pointer to NULL upon error to fix the problem. (cherry picked from commit 4f53d8c6d23527d734fe3531d08e15cb170a0819)Show less

In the Linux kernel, the following vulnerability has been resolved: spi: meson-spicc: Fix double-put in remove path meson_spicc_probe() registers the controller with devm_spi_register_controller(), so teardown already drops the controller reference via devm cleanup. Calling spi_controller_put() again in meson_spicc_remove() causes a double-put.Show less

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Do not skip unrelated mode changes in DSC validation Starting with commit 17ce8a6907f7 ("drm/amd/display: Add dsc pre-validation in atomic check"), amdgpu resets the CRTC state mode_changed flag to false when recomputing the DSC configuration results in no timing change for a particular stream. However, this is incorrect in scenarios where a change in MST/DSC configuration happens in the same KMS commit as another (unrelated) mode change. For example, the integrated panel of a laptop may be configured differently (e.g., HDR enabled/disabled) depending on whether external screens are attached. In this case, plugging in external DP-MST screens may result in the mode_changed flag being dropped incorrectly for the integrated panel if its DSC configuration did not change during precomputation in pre_validate_dsc(). At this point, however, dm_update_crtc_state() has already created new streams for CRTCs with DSC-independent mode changes. In turn, amdgpu_dm_commit_streams() will never release the old stream, resulting in a memory leak. amdgpu_dm_atomic_commit_tail() will never acquire a reference to the new stream either, which manifests as a use-after-free when the stream gets disabled later on: BUG: KASAN: use-after-free in dc_stream_release+0x25/0x90 [amdgpu] Write of size 4 at addr ffff88813d836524 by task kworker/9:9/29977 Workqueue: events drm_mode_rmfb_work_fn Call Trace: <TASK> dump_stack_lvl+0x6e/0xa0 print_address_description.constprop.0+0x88/0x320 ? dc_stream_release+0x25/0x90 [amdgpu] print_report+0xfc/0x1ff ? srso_alias_return_thunk+0x5/0xfbef5 ? __virt_addr_valid+0x225/0x4e0 ? dc_stream_release+0x25/0x90 [amdgpu] kasan_report+0xe1/0x180 ? dc_stream_release+0x25/0x90 [amdgpu] kasan_check_range+0x125/0x200 dc_stream_release+0x25/0x90 [amdgpu] dc_state_destruct+0x14d/0x5c0 [amdgpu] dc_state_release.part.0+0x4e/0x130 [amdgpu] dm_atomic_destroy_state+0x3f/0x70 [amdgpu] drm_atomic_state_default_clear+0x8ee/0xf30 ? drm_mode_object_put.part.0+0xb1/0x130 __drm_atomic_state_free+0x15c/0x2d0 atomic_remove_fb+0x67e/0x980 Since there is no reliable way of figuring out whether a CRTC has unrelated mode changes pending at the time of DSC validation, remember the value of the mode_changed flag from before the point where a CRTC was marked as potentially affected by a change in DSC configuration. Reset the mode_changed flag to this earlier value instead in pre_validate_dsc(). (cherry picked from commit cc7c7121ae082b7b82891baa7280f1ff2608f22b)Show less

In the Linux kernel, the following vulnerability has been resolved: spi: use generic driver_override infrastructure When a driver is probed through __driver_attach(), the bus' match() callback is called without the device lock held, thus accessing the driver_override field without a lock, which can cause a UAF. Fix this by using the driver-core driver_override infrastructure taking care of proper locking internally. Note that calling match() from __driver_attach() without the device lock held is intentional. [1] Also note that we do not enable the driver_override feature of struct bus_type, as SPI - in contrast to most other buses - passes "" to sysfs_emit() when the driver_override pointer is NULL. Thus, printing "\n" instead of "(null)\n".Show less

In the Linux kernel, the following vulnerability has been resolved: hwmon: (pmbus/core) Protect regulator operations with mutex The regulator operations pmbus_regulator_get_voltage(), pmbus_regulator_set_voltage(), and pmbus_regulator_list_voltage() access PMBus registers and shared data but were not protected by the update_lock mutex. This could lead to race conditions. However, adding mutex protection directly to these functions causes a deadlock because pmbus_regulator_notify() (which calls regulator_notifier_call_chain()) is often called with the mutex already held (e.g., from pmbus_fault_handler()). If a regulator callback then calls one of the now-protected voltage functions, it will attempt to acquire the same mutex. Rework pmbus_regulator_notify() to utilize a worker function to send notifications outside of the mutex protection. Events are stored as atomics in a per-page bitmask and processed by the worker. Initialize the worker and its associated data during regulator registration, and ensure it is cancelled on device removal using devm_add_action_or_reset(). While at it, remove the unnecessary include of linux/of.h.Show less

In the Linux kernel, the following vulnerability has been resolved: spi: spi-fsl-lpspi: fix teardown order issue (UAF) There is a teardown order issue in the driver. The SPI controller is registered using devm_spi_register_controller(), which delays unregistration of the SPI controller until after the fsl_lpspi_remove() function returns. As the fsl_lpspi_remove() function synchronously tears down the DMA channels, a running SPI transfer triggers the following NULL pointer dereference due to use after free: | fsl_lpspi 42550000.spi: I/O Error in DMA RX | Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [...] | Call trace: | fsl_lpspi_dma_transfer+0x260/0x340 [spi_fsl_lpspi] | fsl_lpspi_transfer_one+0x198/0x448 [spi_fsl_lpspi] | spi_transfer_one_message+0x49c/0x7c8 | __spi_pump_transfer_message+0x120/0x420 | __spi_sync+0x2c4/0x520 | spi_sync+0x34/0x60 | spidev_message+0x20c/0x378 [spidev] | spidev_ioctl+0x398/0x750 [spidev] [...] Switch from devm_spi_register_controller() to spi_register_controller() in fsl_lpspi_probe() and add the corresponding spi_unregister_controller() in fsl_lpspi_remove().Show less

In the Linux kernel, the following vulnerability has been resolved: io_uring/fdinfo: fix OOB read in SQE_MIXED wrap check __io_uring_show_fdinfo() iterates over pending SQEs and, for 128-byte SQEs on an IORING_SETUP_SQE_MIXED ring, needs to detect when the second half of the SQE would be past the end of the sq_sqes array. The current check tests (++sq_head & sq_mask) == 0, but sq_head is only incremented when a 128-byte SQE is encountered, not on every iteration. The actual array index is sq_idx = (i + sq_head) & sq_mask, which can be sq_mask (the last slot) while the wrap check passes. Fix by checking sq_idx directly. Keep the sq_head increment so the loop still skips the second half of the 128-byte SQE on the next iteration.Show less

In the Linux kernel, the following vulnerability has been resolved: s390/syscalls: Add spectre boundary for syscall dispatch table The s390 syscall number is directly controlled by userspace, but does not have an array_index_nospec() boundary to prevent access past the syscall function pointer tables.Show less

In the Linux kernel, the following vulnerability has been resolved: s390/entry: Scrub r12 register on kernel entry Before commit f33f2d4c7c80 ("s390/bp: remove TIF_ISOLATE_BP"), all entry handlers loaded r12 with the current task pointer (lg %r12,__LC_CURRENT) for use by the BPENTER/BPEXIT macros. That commit removed TIF_ISOLATE_BP, dropping both the branch prediction macros and the r12 load, but did not add r12 to the register clearing sequence. Add the missing xgr %r12,%r12 to make the register scrub consistent across all entry points.Show less

In the Linux kernel, the following vulnerability has been resolved: tracing: Drain deferred trigger frees if kthread creation fails Boot-time trigger registration can fail before the trigger-data cleanup kthread exists. Deferring those frees until late init is fine, but the post-boot fallback must still drain the deferred list if kthread creation never succeeds. Otherwise, boot-deferred nodes can accumulate on trigger_data_free_list, later frees fall back to synchronously freeing only the current object, and the older queued entries are leaked forever. To trigger this, add the following to the kernel command line: trace_event=sched_switch trace_trigger=sched_switch.traceon,sched_switch.traceon The second traceon trigger will fail and be freed. This triggers a NULL pointer dereference and crashes the kernel. Keep the deferred boot-time behavior, but when kthread creation fails, drain the whole queued list synchronously. Do the same in the late-init drain path so queued entries are not stranded there either.Show less

In the Linux kernel, the following vulnerability has been resolved: tracing: Fix potential deadlock in cpu hotplug with osnoise The following sequence may leads deadlock in cpu hotplug: task1 task2 task3 ----- ----- ----- mutex_lock(&interface_lock) [CPU GOING OFFLINE] cpus_write_lock(); osnoise_cpu_die(); kthread_stop(task3); wait_for_completion(); osnoise_sleep(); mutex_lock(&interface_lock); cpus_read_lock(); [DEAD LOCK] Fix by swap the order of cpus_read_lock() and mutex_lock(&interface_lock).Show less

In the Linux kernel, the following vulnerability has been resolved: drm/xe: always keep track of remap prev/next During 3D workload, user is reporting hitting: [ 413.361679] WARNING: drivers/gpu/drm/xe/xe_vm.c:1217 at vm_bind_ioctl_ops_unwind+0x1e2/0x2e0 [xe], CPU#7: vkd3d_queue/9925 [ 413.361944] CPU: 7 UID: 1000 PID: 9925 Comm: vkd3d_queue Kdump: loaded Not tainted 7.0.0-070000rc3-generic #202603090038 PREEMPT(lazy) [ 413.361949] RIP: 0010:vm_bind_ioctl_ops_unwind+0x1e2/0x2e0 [xe] [ 413.362074] RSP: 0018:ffffd4c25c3df930 EFLAGS: 00010282 [ 413.362077] RAX: 0000000000000000 RBX: ffff8f3ee817ed10 RCX: 0000000000000000 [ 413.362078] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 [ 413.362079] RBP: ffffd4c25c3df980 R08: 0000000000000000 R09: 0000000000000000 [ 413.362081] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8f41fbf99380 [ 413.362082] R13: ffff8f3ee817e968 R14: 00000000ffffffef R15: ffff8f43d00bd380 [ 413.362083] FS: 00000001040ff6c0(0000) GS:ffff8f4696d89000(0000) knlGS:00000000330b0000 [ 413.362085] CS: 0010 DS: 002b ES: 002b CR0: 0000000080050033 [ 413.362086] CR2: 00007ddfc4747000 CR3: 00000002e6262005 CR4: 0000000000f72ef0 [ 413.362088] PKRU: 55555554 [ 413.362089] Call Trace: [ 413.362092] <TASK> [ 413.362096] xe_vm_bind_ioctl+0xa9a/0xc60 [xe] Which seems to hint that the vma we are re-inserting for the ops unwind is either invalid or overlapping with something already inserted in the vm. It shouldn't be invalid since this is a re-insertion, so must have worked before. Leaving the likely culprit as something already placed where we want to insert the vma. Following from that, for the case where we do something like a rebind in the middle of a vma, and one or both mapped ends are already compatible, we skip doing the rebind of those vma and set next/prev to NULL. As well as then adjust the original unmap va range, to avoid unmapping the ends. However, if we trigger the unwind path, we end up with three va, with the two ends never being removed and the original va range in the middle still being the shrunken size. If this occurs, one failure mode is when another unwind op needs to interact with that range, which can happen with a vector of binds. For example, if we need to re-insert something in place of the original va. In this case the va is still the shrunken version, so when removing it and then doing a re-insert it can overlap with the ends, which were never removed, triggering a warning like above, plus leaving the vm in a bad state. With that, we need two things here: 1) Stop nuking the prev/next tracking for the skip cases. Instead relying on checking for skip prev/next, where needed. That way on the unwind path, we now correctly remove both ends. 2) Undo the unmap va shrinkage, on the unwind path. With the two ends now removed the unmap va should expand back to the original size again, before re-insertion. v2: - Update the explanation in the commit message, based on an actual IGT of triggering this issue, rather than conjecture. - Also undo the unmap shrinkage, for the skip case. With the two ends now removed, the original unmap va range should expand back to the original range. v3: - Track the old start/range separately. vma_size/start() uses the va info directly. (cherry picked from commit aec6969f75afbf4e01fd5fb5850ed3e9c27043ac)Show less

In the Linux kernel, the following vulnerability has been resolved: ksmbd: replace hardcoded hdr2_len with offsetof() in smb2_calc_max_out_buf_len() After this commit (e2b76ab8b5c9 "ksmbd: add support for read compound"), response buffer management was changed to use dynamic iov array. In the new design, smb2_calc_max_out_buf_len() expects the second argument (hdr2_len) to be the offset of ->Buffer field in the response structure, not a hardcoded magic number. Fix the remaining call sites to use the correct offsetof() value.Show less

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix memory leaks and NULL deref in smb2_lock() smb2_lock() has three error handling issues after list_del() detaches smb_lock from lock_list at no_check_cl: 1) If vfs_lock_file() returns an unexpected error in the non-UNLOCK path, goto out leaks smb_lock and its flock because the out: handler only iterates lock_list and rollback_list, neither of which contains the detached smb_lock. 2) If vfs_lock_file() returns -ENOENT in the UNLOCK path, goto out leaks smb_lock and flock for the same reason. The error code returned to the dispatcher is also stale. 3) In the rollback path, smb_flock_init() can return NULL on allocation failure. The result is dereferenced unconditionally, causing a kernel NULL pointer dereference. Add a NULL check to prevent the crash and clean up the bookkeeping; the VFS lock itself cannot be rolled back without the allocation and will be released at file or connection teardown. Fix cases 1 and 2 by hoisting the locks_free_lock()/kfree() to before the if(!rc) check in the UNLOCK branch so all exit paths share one free site, and by freeing smb_lock and flock before goto out in the non-UNLOCK branch. Propagate the correct error code in both cases. Fix case 3 by wrapping the VFS unlock in an if(rlock) guard and adding a NULL check for locks_free_lock(rlock) in the shared cleanup. Found via call-graph analysis using sqry.Show less

In the Linux kernel, the following vulnerability has been resolved: ksmbd: do not expire session on binding failure When a multichannel session binding request fails (e.g. wrong password), the error path unconditionally sets sess->state = SMB2_SESSION_EXPIRED. However, during binding, sess points to the target session looked up via ksmbd_session_lookup_slowpath() -- which belongs to another connection's user. This allows a remote attacker to invalidate any active session by simply sending a binding request with a wrong password (DoS). Fix this by skipping session expiration when the failed request was a binding attempt, since the session does not belong to the current connection. The reference taken by ksmbd_session_lookup_slowpath() is still correctly released via ksmbd_user_session_put().Show less

In the Linux kernel, the following vulnerability has been resolved: ASoC: sma1307: fix double free of devm_kzalloc() memory A previous change added NULL checks and cleanup for allocation failures in sma1307_setting_loaded(). However, the cleanup for mode_set entries is wrong. Those entries are allocated with devm_kzalloc(), so they are device-managed resources and must not be freed with kfree(). Manually freeing them in the error path can lead to a double free when devres later releases the same memory. Drop the manual kfree() loop and let devres handle the cleanup.Show less

In the Linux kernel, the following vulnerability has been resolved: can: isotp: fix tx.buf use-after-free in isotp_sendmsg() isotp_sendmsg() uses only cmpxchg() on so->tx.state to serialize access to so->tx.buf. isotp_release() waits for ISOTP_IDLE via wait_event_interruptible() and then calls kfree(so->tx.buf). If a signal interrupts the wait_event_interruptible() inside close() while tx.state is ISOTP_SENDING, the loop exits early and release proceeds to force ISOTP_SHUTDOWN and continues to kfree(so->tx.buf) while sendmsg may still be reading so->tx.buf for the final CAN frame in isotp_fill_dataframe(). The so->tx.buf can be allocated once when the standard tx.buf length needs to be extended. Move the kfree() of this potentially extended tx.buf to sk_destruct time when either isotp_sendmsg() and isotp_release() are done.Show less

In the Linux kernel, the following vulnerability has been resolved: media: mc, v4l2: serialize REINIT and REQBUFS with req_queue_mutex MEDIA_REQUEST_IOC_REINIT can run concurrently with VIDIOC_REQBUFS(0) queue teardown paths. This can race request object cleanup against vb2 queue cancellation and lead to use-after-free reports. We already serialize request queueing against STREAMON/OFF with req_queue_mutex. Extend that serialization to REQBUFS, and also take the same mutex in media_request_ioctl_reinit() so REINIT is in the same exclusion domain. This keeps request cleanup and queue cancellation from running in parallel for request-capable devices.Show less