Linux

In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: handle attr_set_size() errors when truncating files If attr_set_size() fails while truncating down, the error is silently ignored and the inode may be left in an inconsistent state.Show less

In the Linux kernel, the following vulnerability has been resolved: memory: mtk-smi: fix device leaks on common probe Make sure to drop the reference taken when looking up the SMI device during common probe on late probe failure (e.g. probe deferral) and on driver unbind.Show less

In the Linux kernel, the following vulnerability has been resolved: memory: mtk-smi: fix device leak on larb probe Make sure to drop the reference taken when looking up the SMI device during larb probe on late probe failure (e.g. probe deferral) and on driver unbind.Show less

In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: ipc4-topology: Correct the allocation size for bytes controls The size of the data behind of scontrol->ipc_control_data for bytes controls is: [1] sizeof(struct sof_ipc4_control_data) + // kernel only struct [2] sizeof(struct sof_abi_hdr)) + payload The max_size specifies the size of [2] and it is coming from topology. Change the function to take this into account and allocate adequate amount of memory behind scontrol->ipc_control_data. With the change we will allocate [1] amount more memory to be able to hold the full size of data.Show less

In the Linux kernel, the following vulnerability has been resolved: net: qrtr: Drop the MHI auto_queue feature for IPCR DL channels MHI stack offers the 'auto_queue' feature, which allows the MHI stack to auto queue the buffers for the RX path (DL channel). Though this feature simplifies the client driver design, it introduces race between the client drivers and the MHI stack. For instance, with auto_queue, the 'dl_callback' for the DL channel may get called before the client driver is fully probed. This means, by the time the dl_callback gets called, the client driver's structures might not be initialized, leading to NULL ptr dereference. Currently, the drivers have to workaround this issue by initializing the internal structures before calling mhi_prepare_for_transfer_autoqueue(). But even so, there is a chance that the client driver's internal code path may call the MHI queue APIs before mhi_prepare_for_transfer_autoqueue() is called, leading to similar NULL ptr dereference. This issue has been reported on the Qcom X1E80100 CRD machines affecting boot. So to properly fix all these races, drop the MHI 'auto_queue' feature altogether and let the client driver (QRTR) manage the RX buffers manually. In the QRTR driver, queue the RX buffers based on the ring length during probe and recycle the buffers in 'dl_callback' once they are consumed. This also warrants removing the setting of 'auto_queue' flag from controller drivers. Currently, this 'auto_queue' feature is only enabled for IPCR DL channel. So only the QRTR client driver requires the modification.Show less

In the Linux kernel, the following vulnerability has been resolved: rpmsg: core: fix race in driver_override_show() and use core helper The driver_override_show function reads the driver_override string without holding the device_lock. However, the store function modifies and frees the string while holding the device_lock. This creates a race condition where the string can be freed by the store function while being read by the show function, leading to a use-after-free. To fix this, replace the rpmsg_string_attr macro with explicit show and store functions. The new driver_override_store uses the standard driver_set_override helper. Since the introduction of driver_set_override, the comments in include/linux/rpmsg.h have stated that this helper must be used to set or clear driver_override, but the implementation was not updated until now. Because driver_set_override modifies and frees the string while holding the device_lock, the new driver_override_show now correctly holds the device_lock during the read operation to prevent the race. Additionally, since rpmsg_string_attr has only ever been used for driver_override, removing the macro simplifies the code.Show less

In the Linux kernel, the following vulnerability has been resolved: wifi: rtw88: Use devm_kmemdup() in rtw_set_supported_band() Simplify the code by using device managed memory allocations. This also fixes a memory leak in rtw_register_hw(). The supported bands were not freed in the error path. Copied from commit 145df52a8671 ("wifi: rtw89: Convert rtw89_core_set_supported_band to use devm_*").Show less

In the Linux kernel, the following vulnerability has been resolved: most: core: fix resource leak in most_register_interface error paths The function most_register_interface() did not correctly release resources if it failed early (before registering the device). In these cases, it returned an error code immediately, leaking the memory allocated for the interface. Fix this by initializing the device early via device_initialize() and calling put_device() on all error paths. The most_register_interface() is expected to call put_device() on error which frees the resources allocated in the caller. The put_device() either calls release_mdev() or dim2_release(), depending on the caller. Switch to using device_add() instead of device_register() to handle the split initialization.Show less

In the Linux kernel, the following vulnerability has been resolved: hfsplus: ensure sb->s_fs_info is always cleaned up When hfsplus was converted to the new mount api a bug was introduced by changing the allocation pattern of sb->s_fs_info. If setup_bdev_super() fails after a new superblock has been allocated by sget_fc(), but before hfsplus_fill_super() takes ownership of the filesystem-specific s_fs_info data it was leaked. Fix this by freeing sb->s_fs_info in hfsplus_kill_super().Show less

In the Linux kernel, the following vulnerability has been resolved: RDMA/irdma: Fix double free related to rereg_user_mr If IB_MR_REREG_TRANS is set during rereg_user_mr, the umem will be released and a new one will be allocated in irdma_rereg_mr_trans. If any step of irdma_rereg_mr_trans fails after the new umem is allocated, it releases the umem, but does not set iwmr->region to NULL. The problem is that this failure is propagated to the user, who will then call ibv_dereg_mr (as they should). Then, the dereg_mr path will see a non-NULL umem and attempt to call ib_umem_release again. Fix this by setting iwmr->region to NULL after ib_umem_release. Fixed: 5ac388db27c4 ("RDMA/irdma: Add support to re-register a memory region")Show less

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sync: annotate data-races around hdev->req_status __hci_cmd_sync_sk() sets hdev->req_status under hdev->req_lock: hdev->req_status = HCI_REQ_PEND; However, several other functions read or write hdev->req_status without holding any lock: - hci_send_cmd_sync() reads req_status in hci_cmd_work (workqueue) - hci_cmd_sync_complete() reads/writes from HCI event completion - hci_cmd_sync_cancel() / hci_cmd_sync_cancel_sync() read/write - hci_abort_conn() reads in connection abort path Since __hci_cmd_sync_sk() runs on hdev->req_workqueue while hci_send_cmd_sync() runs on hdev->workqueue, these are different workqueues that can execute concurrently on different CPUs. The plain C accesses constitute a data race. Add READ_ONCE()/WRITE_ONCE() annotations on all concurrent accesses to hdev->req_status to prevent potential compiler optimizations that could affect correctness (e.g., load fusing in the wait_event condition or store reordering).Show less

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix zero size inode with non-zero size after log replay When logging that an inode exists, as part of logging a new name or logging new dir entries for a directory, we always set the generation of the logged inode item to 0. This is to signal during log replay (in overwrite_item()), that we should not set the i_size since we only logged that an inode exists, so the i_size of the inode in the subvolume tree must be preserved (as when we log new names or that an inode exists, we don't log extents). This works fine except when we have already logged an inode in full mode or it's the first time we are logging an inode created in a past transaction, that inode has a new i_size of 0 and then we log a new name for the inode (due to a new hardlink or a rename), in which case we log an i_size of 0 for the inode and a generation of 0, which causes the log replay code to not update the inode's i_size to 0 (in overwrite_item()). An example scenario: mkdir /mnt/dir xfs_io -f -c "pwrite 0 64K" /mnt/dir/foo sync xfs_io -c "truncate 0" -c "fsync" /mnt/dir/foo ln /mnt/dir/foo /mnt/dir/bar xfs_io -c "fsync" /mnt/dir <power fail> After log replay the file remains with a size of 64K. This is because when we first log the inode, when we fsync file foo, we log its current i_size of 0, and then when we create a hard link we log again the inode in exists mode (LOG_INODE_EXISTS) but we set a generation of 0 for the inode item we add to the log tree, so during log replay overwrite_item() sees that the generation is 0 and i_size is 0 so we skip updating the inode's i_size from 64K to 0. Fix this by making sure at fill_inode_item() we always log the real generation of the inode if it was logged in the current transaction with the i_size we logged before. Also if an inode created in a previous transaction is logged in exists mode only, make sure we log the i_size stored in the inode item located from the commit root, so that if we log multiple times that the inode exists we get the correct i_size. A test case for fstests will follow soon.Show less

In the Linux kernel, the following vulnerability has been resolved: btrfs: tracepoints: get correct superblock from dentry in event btrfs_sync_file() If overlay is used on top of btrfs, dentry->d_sb translates to overlay's super block and fsid assignment will lead to a crash. Use file_inode(file)->i_sb to always get btrfs_sb.Show less

In the Linux kernel, the following vulnerability has been resolved: netfilter: ctnetlink: ensure safe access to master conntrack Holding reference on the expectation is not sufficient, the master conntrack object can just go away, making exp->master invalid. To access exp->master safely: - Grab the nf_conntrack_expect_lock, this gets serialized with clean_from_lists() which also holds this lock when the master conntrack goes away. - Hold reference on master conntrack via nf_conntrack_find_get(). Not so easy since the master tuple to look up for the master conntrack is not available in the existing problematic paths. This patch goes for extending the nf_conntrack_expect_lock section to address this issue for simplicity, in the cases that are described below this is just slightly extending the lock section. The add expectation command already holds a reference to the master conntrack from ctnetlink_create_expect(). However, the delete expectation command needs to grab the spinlock before looking up for the expectation. Expand the existing spinlock section to address this to cover the expectation lookup. Note that, the nf_ct_expect_iterate_net() calls already grabs the spinlock while iterating over the expectation table, which is correct. The get expectation command needs to grab the spinlock to ensure master conntrack does not go away. This also expands the existing spinlock section to cover the expectation lookup too. I needed to move the netlink skb allocation out of the spinlock to keep it GFP_KERNEL. For the expectation events, the IPEXP_DESTROY event is already delivered under the spinlock, just move the delivery of IPEXP_NEW under the spinlock too because the master conntrack event cache is reached through exp->master. While at it, add lockdep notations to help identify what codepaths need to grab the spinlock.Show less

In the Linux kernel, the following vulnerability has been resolved: srcu: Use irq_work to start GP in tiny SRCU Tiny SRCU's srcu_gp_start_if_needed() directly calls schedule_work(), which acquires the workqueue pool->lock. This causes a lockdep splat when call_srcu() is called with a scheduler lock held, due to: call_srcu() [holding pi_lock] srcu_gp_start_if_needed() schedule_work() -> pool->lock workqueue_init() / create_worker() [holding pool->lock] wake_up_process() -> try_to_wake_up() -> pi_lock Also add irq_work_sync() to cleanup_srcu_struct() to prevent a use-after-free if a queued irq_work fires after cleanup begins. Tested with rcutorture SRCU-T and no lockdep warnings. [ Thanks to Boqun for similar fix in patch "rcu: Use an intermediate irq_work to start process_srcu()" ]Show less

In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_set_pipapo_avx2: don't return non-matching entry on expiry New test case fails unexpectedly when avx2 matching functions are used. The test first loads a ranomly generated pipapo set with 'ipv4 . port' key, i.e. nft -f foo. This works. Then, it reloads the set after a flush: (echo flush set t s; cat foo) | nft -f - This is expected to work, because its the same set after all and it was already loaded once. But with avx2, this fails: nft reports a clashing element. The reported clash is of following form: We successfully re-inserted a . b c . d Then we try to insert a . d avx2 finds the already existing a . d, which (due to 'flush set') is marked as invalid in the new generation. It skips the element and moves to next. Due to incorrect masking, the skip-step finds the next matching element *only considering the first field*, i.e. we return the already reinserted "a . b", even though the last field is different and the entry should not have been matched. No such error is reported for the generic c implementation (no avx2) or when the last field has to use the 'nft_pipapo_avx2_lookup_slow' fallback. Bisection points to 7711f4bb4b36 ("netfilter: nft_set_pipapo: fix range overlap detection") but that fix merely uncovers this bug. Before this commit, the wrong element is returned, but erronously reported as a full, identical duplicate. The root-cause is too early return in the avx2 match functions. When we process the last field, we should continue to process data until the entire input size has been consumed to make sure no stale bits remain in the map.Show less

In the Linux kernel, the following vulnerability has been resolved: wifi: wl1251: validate packet IDs before indexing tx_frames wl1251_tx_packet_cb() uses the firmware completion ID directly to index the fixed 16-entry wl->tx_frames[] array. The ID is a raw u8 from the completion block, and the callback does not currently verify that it fits the array before dereferencing it. Reject completion IDs that fall outside wl->tx_frames[] and keep the existing NULL check in the same guard. This keeps the fix local to the trust boundary and avoids touching the rest of the completion flow.Show less

In the Linux kernel, the following vulnerability has been resolved: fs/smb/client: fix out-of-bounds read in cifs_sanitize_prepath When cifs_sanitize_prepath is called with an empty string or a string containing only delimiters (e.g., "/"), the current logic attempts to check *(cursor2 - 1) before cursor2 has advanced. This results in an out-of-bounds read. This patch adds an early exit check after stripping prepended delimiters. If no path content remains, the function returns NULL. The bug was identified via manual audit and verified using a standalone test case compiled with AddressSanitizer, which triggered a SEGV on affected inputs.Show less

In the Linux kernel, the following vulnerability has been resolved: HID: roccat: fix use-after-free in roccat_report_event roccat_report_event() iterates over the device->readers list without holding the readers_lock. This allows a concurrent roccat_release() to remove and free a reader while it's still being accessed, leading to a use-after-free. Protect the readers list traversal with the readers_lock mutex.Show less

In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: validate bsscfg indices in IF events brcmf_fweh_handle_if_event() validates the firmware-provided interface index before it touches drvr->iflist[], but it still uses the raw bsscfgidx field as an array index without a matching range check. Reject IF events whose bsscfg index does not fit in drvr->iflist[] before indexing the interface array. [add missing wifi prefix]Show less