Linux

In the Linux kernel, the following vulnerability has been resolved: rust_binder: fix oneway spam detection The spam detection logic in TreeRange was executed before the current request was inserted into the tree. So the new request was not being factored in the spam calculation. Fix this by moving the logic after the new range has been inserted. Also, the detection logic for ArrayRange was missing altogether which meant large spamming transactions could get away without being detected. Fix this by implementing an equivalent low_oneway_space() in ArrayRange. Note that I looked into centralizing this logic in RangeAllocator but iterating through 'state' and 'size' got a bit too complicated (for me) and I abandoned this effort.Show less

In the Linux kernel, the following vulnerability has been resolved: rust_binder: check ownership before using vma When installing missing pages (or zapping them), Rust Binder will look up the vma in the mm by address, and then call vm_insert_page (or zap_page_range_single). However, if the vma is closed and replaced with a different vma at the same address, this can lead to Rust Binder installing pages into the wrong vma. By installing the page into a writable vma, it becomes possible to write to your own binder pages, which are normally read-only. Although you're not supposed to be able to write to those pages, the intent behind the design of Rust Binder is that even if you get that ability, it should not lead to anything bad. Unfortunately, due to another bug, that is not the case. To fix this, store a pointer in vm_private_data and check that the vma returned by vma_lookup() has the right vm_ops and vm_private_data before trying to use the vma. This should ensure that Rust Binder will refuse to interact with any other VMA. The plan is to introduce more vma abstractions to avoid this unsafe access to vm_ops and vm_private_data, but for now let's start with the simplest possible fix. C Binder performs the same check in a slightly different way: it provides a vm_ops->close that sets a boolean to true, then checks that boolean after calling vma_lookup(), but this is more fragile than the solution in this patch. (We probably still want to do both, but the vm_ops->close callback will be added later as part of the follow-up vma API changes.) It's still possible to remap the vma so that pages appear in the right vma, but at the wrong offset, but this is a separate issue and will be fixed when Rust Binder gets a vm_ops->close callback.Show less

In the Linux kernel, the following vulnerability has been resolved: rust_binder: avoid reading the written value in offsets array When sending a transaction, its offsets array is first copied into the target proc's vma, and then the values are read back from there. This is normally fine because the vma is a read-only mapping, so the target process cannot change the value under us. However, if the target process somehow gains the ability to write to its own vma, it could change the offset before it's read back, causing the kernel to misinterpret what the sender meant. If the sender happens to send a payload with a specific shape, this could in the worst case lead to the receiver being able to privilege escalate into the sender. The intent is that gaining the ability to change the read-only vma of your own process should not be exploitable, so remove this TOCTOU read even though it's unexploitable without another Binder bug.Show less

In the Linux kernel, the following vulnerability has been resolved: usb: xhci: Fix memory leak in xhci_disable_slot() xhci_alloc_command() allocates a command structure and, when the second argument is true, also allocates a completion structure. Currently, the error handling path in xhci_disable_slot() only frees the command structure using kfree(), causing the completion structure to leak. Use xhci_free_command() instead of kfree(). xhci_free_command() correctly frees both the command structure and the associated completion structure. Since the command structure is allocated with zero-initialization, command->in_ctx is NULL and will not be erroneously freed by xhci_free_command(). This bug was found using an experimental static analysis tool we are developing. The tool is based on the LLVM framework and is specifically designed to detect memory management issues. It is currently under active development and not yet publicly available, but we plan to open-source it after our research is published. The bug was originally detected on v6.13-rc1 using our static analysis tool, and we have verified that the issue persists in the latest mainline kernel. We performed build testing on x86_64 with allyesconfig using GCC=11.4.0. Since triggering these error paths in xhci_disable_slot() requires specific hardware conditions or abnormal state, we were unable to construct a test case to reliably trigger these specific error paths at runtime.Show less

In the Linux kernel, the following vulnerability has been resolved: xhci: Fix NULL pointer dereference when reading portli debugfs files Michal reported and debgged a NULL pointer dereference bug in the recently added portli debugfs files Oops is caused when there are more port registers counted in xhci->max_ports than ports reported by Supported Protocol capabilities. This is possible if max_ports is more than maximum port number, or if there are gaps between ports of different speeds the 'Supported Protocol' capabilities. In such cases port->rhub will be NULL so we can't reach xhci behind it. Add an explicit NULL check for this case, and print portli in hex without dereferencing port->rhub.Show less

In the Linux kernel, the following vulnerability has been resolved: usb: yurex: fix race in probe The bbu member of the descriptor must be set to the value standing for uninitialized values before the URB whose completion handler sets bbu is submitted. Otherwise there is a window during which probing can overwrite already retrieved data.Show less

In the Linux kernel, the following vulnerability has been resolved: USB: usbtmc: Use usb_bulk_msg_killable() with user-specified timeouts The usbtmc driver accepts timeout values specified by the user in an ioctl command, and uses these timeouts for some usb_bulk_msg() calls. Since the user can specify arbitrarily long timeouts and usb_bulk_msg() uses unkillable waits, call usb_bulk_msg_killable() instead to avoid the possibility of the user hanging a kernel thread indefinitely.Show less

In the Linux kernel, the following vulnerability has been resolved: USB: core: Limit the length of unkillable synchronous timeouts The usb_control_msg(), usb_bulk_msg(), and usb_interrupt_msg() APIs in usbcore allow unlimited timeout durations. And since they use uninterruptible waits, this leaves open the possibility of hanging a task for an indefinitely long time, with no way to kill it short of unplugging the target device. To prevent this sort of problem, enforce a maximum limit on the length of these unkillable timeouts. The limit chosen here, somewhat arbitrarily, is 60 seconds. On many systems (although not all) this is short enough to avoid triggering the kernel's hung-task detector. In addition, clear up the ambiguity of negative timeout values by treating them the same as 0, i.e., using the maximum allowed timeout.Show less

In the Linux kernel, the following vulnerability has been resolved: usb: class: cdc-wdm: fix reordering issue in read code path Quoting the bug report: Due to compiler optimization or CPU out-of-order execution, the desc->length update can be reordered before the memmove. If this happens, wdm_read() can see the new length and call copy_to_user() on uninitialized memory. This also violates LKMM data race rules [1]. Fix it by using WRITE_ONCE and memory barriers.Show less

In the Linux kernel, the following vulnerability has been resolved: usb: renesas_usbhs: fix use-after-free in ISR during device removal In usbhs_remove(), the driver frees resources (including the pipe array) while the interrupt handler (usbhs_interrupt) is still registered. If an interrupt fires after usbhs_pipe_remove() but before the driver is fully unbound, the ISR may access freed memory, causing a use-after-free. Fix this by calling devm_free_irq() before freeing resources. This ensures the interrupt handler is both disabled and synchronized (waits for any running ISR to complete) before usbhs_pipe_remove() is called.Show less

In the Linux kernel, the following vulnerability has been resolved: usb: image: mdc800: kill download URB on timeout mdc800_device_read() submits download_urb and waits for completion. If the timeout fires and the device has not responded, the function returns without killing the URB, leaving it active. A subsequent read() resubmits the same URB while it is still in-flight, triggering the WARN in usb_submit_urb(): "URB submitted while active" Check the return value of wait_event_timeout() and kill the URB if it indicates timeout, ensuring the URB is complete before its status is inspected or the URB is resubmitted. Similar to - commit 372c93131998 ("USB: yurex: fix control-URB timeout handling") - commit b98d5000c505 ("media: rc: iguanair: handle timeouts")Show less

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_tcm: Fix NULL pointer dereferences in nexus handling The `tpg->tpg_nexus` pointer in the USB Target driver is dynamically managed and tied to userspace configuration via ConfigFS. It can be NULL if the USB host sends requests before the nexus is fully established or immediately after it is dropped. Currently, functions like `bot_submit_command()` and the data transfer paths retrieve `tv_nexus = tpg->tpg_nexus` and immediately dereference `tv_nexus->tvn_se_sess` without any validation. If a malicious or misconfigured USB host sends a BOT (Bulk-Only Transport) command during this race window, it triggers a NULL pointer dereference, leading to a kernel panic (local DoS). This exposes an inconsistent API usage within the module, as peer functions like `usbg_submit_command()` and `bot_send_bad_response()` correctly implement a NULL check for `tv_nexus` before proceeding. Fix this by bringing consistency to the nexus handling. Add the missing `if (!tv_nexus)` checks to the vulnerable BOT command and request processing paths, aborting the command gracefully with an error instead of crashing the system.Show less

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_ncm: Fix net_device lifecycle with device_move The network device outlived its parent gadget device during disconnection, resulting in dangling sysfs links and null pointer dereference problems. A prior attempt to solve this by removing SET_NETDEV_DEV entirely [1] was reverted due to power management ordering concerns and a NO-CARRIER regression. A subsequent attempt to defer net_device allocation to bind [2] broke 1:1 mapping between function instance and network device, making it impossible for configfs to report the resolved interface name. This results in a regression where the DHCP server fails on pmOS. Use device_move to reparent the net_device between the gadget device and /sys/devices/virtual/ across bind/unbind cycles. This preserves the network interface across USB reconnection, allowing the DHCP server to retain their binding. Introduce gether_attach_gadget()/gether_detach_gadget() helpers and use __free(detach_gadget) macro to undo attachment on bind failure. The bind_count ensures device_move executes only on the first bind. [1] https://lore.kernel.org/lkml/f2a4f9847617a0929d62025748384092e5f35cce.camel@crapouillou.net/ [2] https://lore.kernel.org/linux-usb/795ea759-7eaf-4f78-81f4-01ffbf2d7961@ixit.cz/Show less

In the Linux kernel, the following vulnerability has been resolved: ceph: fix i_nlink underrun during async unlink During async unlink, we drop the `i_nlink` counter before we receive the completion (that will eventually update the `i_nlink`) because "we assume that the unlink will succeed". That is not a bad idea, but it races against deletions by other clients (or against the completion of our own unlink) and can lead to an underrun which emits a WARNING like this one: WARNING: CPU: 85 PID: 25093 at fs/inode.c:407 drop_nlink+0x50/0x68 Modules linked in: CPU: 85 UID: 3221252029 PID: 25093 Comm: php-cgi8.1 Not tainted 6.14.11-cm4all1-ampere #655 Hardware name: Supermicro ARS-110M-NR/R12SPD-A, BIOS 1.1b 10/17/2023 pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : drop_nlink+0x50/0x68 lr : ceph_unlink+0x6c4/0x720 sp : ffff80012173bc90 x29: ffff80012173bc90 x28: ffff086d0a45aaf8 x27: ffff0871d0eb5680 x26: ffff087f2a64a718 x25: 0000020000000180 x24: 0000000061c88647 x23: 0000000000000002 x22: ffff07ff9236d800 x21: 0000000000001203 x20: ffff07ff9237b000 x19: ffff088b8296afc0 x18: 00000000f3c93365 x17: 0000000000070000 x16: ffff08faffcbdfe8 x15: ffff08faffcbdfec x14: 0000000000000000 x13: 45445f65645f3037 x12: 34385f6369706f74 x11: 0000a2653104bb20 x10: ffffd85f26d73290 x9 : ffffd85f25664f94 x8 : 00000000000000c0 x7 : 0000000000000000 x6 : 0000000000000002 x5 : 0000000000000081 x4 : 0000000000000481 x3 : 0000000000000000 x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff08727d3f91e8 Call trace: drop_nlink+0x50/0x68 (P) vfs_unlink+0xb0/0x2e8 do_unlinkat+0x204/0x288 __arm64_sys_unlinkat+0x3c/0x80 invoke_syscall.constprop.0+0x54/0xe8 do_el0_svc+0xa4/0xc8 el0_svc+0x18/0x58 el0t_64_sync_handler+0x104/0x130 el0t_64_sync+0x154/0x158 In ceph_unlink(), a call to ceph_mdsc_submit_request() submits the CEPH_MDS_OP_UNLINK to the MDS, but does not wait for completion. Meanwhile, between this call and the following drop_nlink() call, a worker thread may process a CEPH_CAP_OP_IMPORT, CEPH_CAP_OP_GRANT or just a CEPH_MSG_CLIENT_REPLY (the latter of which could be our own completion). These will lead to a set_nlink() call, updating the `i_nlink` counter to the value received from the MDS. If that new `i_nlink` value happens to be zero, it is illegal to decrement it further. But that is exactly what ceph_unlink() will do then. The WARNING can be reproduced this way: 1. Force async unlink; only the async code path is affected. Having no real clue about Ceph internals, I was unable to find out why the MDS wouldn't give me the "Fxr" capabilities, so I patched get_caps_for_async_unlink() to always succeed. (Note that the WARNING dump above was found on an unpatched kernel, without this kludge - this is not a theoretical bug.) 2. Add a sleep call after ceph_mdsc_submit_request() so the unlink completion gets handled by a worker thread before drop_nlink() is called. This guarantees that the `i_nlink` is already zero before drop_nlink() runs. The solution is to skip the counter decrement when it is already zero, but doing so without a lock is still racy (TOCTOU). Since ceph_fill_inode() and handle_cap_grant() both hold the `ceph_inode_info.i_ceph_lock` spinlock while set_nlink() runs, this seems like the proper lock to protect the `i_nlink` updates. I found prior art in NFS and SMB (using `inode.i_lock`) and AFS (using `afs_vnode.cb_lock`). All three have the zero check as well.Show less

In the Linux kernel, the following vulnerability has been resolved: ceph: fix memory leaks in ceph_mdsc_build_path() Add __putname() calls to error code paths that did not free the "path" pointer obtained by __getname(). If ownership of this pointer is not passed to the caller via path_info.path, the function must free it before returning.Show less

In the Linux kernel, the following vulnerability has been resolved: sched/mmcid: Prevent CID stalls due to concurrent forks A newly forked task is accounted as MMCID user before the task is visible in the process' thread list and the global task list. This creates the following problem: CPU1 CPU2 fork() sched_mm_cid_fork(tnew1) tnew1->mm.mm_cid_users++; tnew1->mm_cid.cid = getcid() -> preemption fork() sched_mm_cid_fork(tnew2) tnew2->mm.mm_cid_users++; // Reaches the per CPU threshold mm_cid_fixup_tasks_to_cpus() for_each_other(current, p) .... As tnew1 is not visible yet, this fails to fix up the already allocated CID of tnew1. As a consequence a subsequent schedule in might fail to acquire a (transitional) CID and the machine stalls. Move the invocation of sched_mm_cid_fork() after the new task becomes visible in the thread and the task list to prevent this. This also makes it symmetrical vs. exit() where the task is removed as CID user before the task is removed from the thread and task lists.Show less

In the Linux kernel, the following vulnerability has been resolved: sched/mmcid: Handle vfork()/CLONE_VM correctly Matthieu and Jiri reported stalls where a task endlessly loops in mm_get_cid() when scheduling in. It turned out that the logic which handles vfork()'ed tasks is broken. It is invoked when the number of tasks associated to a process is smaller than the number of MMCID users. It then walks the task list to find the vfork()'ed task, but accounts all the already processed tasks as well. If that double processing brings the number of to be handled tasks to 0, the walk stops and the vfork()'ed task's CID is not fixed up. As a consequence a subsequent schedule in fails to acquire a (transitional) CID and the machine stalls. Cure this by removing the accounting condition and make the fixup always walk the full task list if it could not find the exact number of users in the process' thread list.Show less

In the Linux kernel, the following vulnerability has been resolved: powerpc, perf: Check that current->mm is alive before getting user callchain It may happen that mm is already released, which leads to kernel panic. This adds the NULL check for current->mm, similarly to commit 20afc60f892d ("x86, perf: Check that current->mm is alive before getting user callchain"). I was getting this panic when running a profiling BPF program (profile.py from bcc-tools): [26215.051935] Kernel attempted to read user page (588) - exploit attempt? (uid: 0) [26215.051950] BUG: Kernel NULL pointer dereference on read at 0x00000588 [26215.051952] Faulting instruction address: 0xc00000000020fac0 [26215.051957] Oops: Kernel access of bad area, sig: 11 [#1] [...] [26215.052049] Call Trace: [26215.052050] [c000000061da6d30] [c00000000020fc10] perf_callchain_user_64+0x2d0/0x490 (unreliable) [26215.052054] [c000000061da6dc0] [c00000000020f92c] perf_callchain_user+0x1c/0x30 [26215.052057] [c000000061da6de0] [c0000000005ab2a0] get_perf_callchain+0x100/0x360 [26215.052063] [c000000061da6e70] [c000000000573bc8] bpf_get_stackid+0x88/0xf0 [26215.052067] [c000000061da6ea0] [c008000000042258] bpf_prog_16d4ab9ab662f669_do_perf_event+0xf8/0x274 [...] In addition, move storing the top-level stack entry to generic perf_callchain_user to make sure the top-evel entry is always captured, even if current->mm is NULL. [Maddy: fixed message to avoid checkpatch format style error]Show less

In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: core: Fix SError in ufshcd_rtc_work() during UFS suspend In __ufshcd_wl_suspend(), cancel_delayed_work_sync() is called to cancel the UFS RTC work, but it is placed after ufshcd_vops_suspend(hba, pm_op, POST_CHANGE). This creates a race condition where ufshcd_rtc_work() can still be running while ufshcd_vops_suspend() is executing. When UFSHCD_CAP_CLK_GATING is not supported, the condition !hba->clk_gating.active_reqs is always true, causing ufshcd_update_rtc() to be executed. Since ufshcd_vops_suspend() typically performs clock gating operations, executing ufshcd_update_rtc() at that moment triggers an SError. The kernel panic trace is as follows: Kernel panic - not syncing: Asynchronous SError Interrupt Call trace: dump_backtrace+0xec/0x128 show_stack+0x18/0x28 dump_stack_lvl+0x40/0xa0 dump_stack+0x18/0x24 panic+0x148/0x374 nmi_panic+0x3c/0x8c arm64_serror_panic+0x64/0x8c do_serror+0xc4/0xc8 el1h_64_error_handler+0x34/0x4c el1h_64_error+0x68/0x6c el1_interrupt+0x20/0x58 el1h_64_irq_handler+0x18/0x24 el1h_64_irq+0x68/0x6c ktime_get+0xc4/0x12c ufshcd_mcq_sq_stop+0x4c/0xec ufshcd_mcq_sq_cleanup+0x64/0x1dc ufshcd_clear_cmd+0x38/0x134 ufshcd_issue_dev_cmd+0x298/0x4d0 ufshcd_exec_dev_cmd+0x1a4/0x1c4 ufshcd_query_attr+0xbc/0x19c ufshcd_rtc_work+0x10c/0x1c8 process_scheduled_works+0x1c4/0x45c worker_thread+0x32c/0x3e8 kthread+0x120/0x1d8 ret_from_fork+0x10/0x20 Fix this by moving cancel_delayed_work_sync() before the call to ufshcd_vops_suspend(hba, pm_op, PRE_CHANGE), ensuring the UFS RTC work is fully completed or cancelled at that point.Show less

In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Completely fix fcport double free In qla24xx_els_dcmd_iocb() sp->free is set to qla2x00_els_dcmd_sp_free(). When an error happens, this function is called by qla2x00_sp_release(), when kref_put() releases the first and the last reference. qla2x00_els_dcmd_sp_free() frees fcport by calling qla2x00_free_fcport(). Doing it one more time after kref_put() is a bad idea.Show less