Linux

In the Linux kernel, the following vulnerability has been resolved: HID: playstation: Clamp num_touch_reports A device would never lie about the number of touch reports would it? If it does the loop in dualshock4_parse_report will read off the end of the touch_reports array, up to about 2 KiB for the maximum number of 256 loop iteraions. The data that is read is emitted via evdev if the DS4_TOUCH_POINT_INACTIVE bit happens to be set. Protect against this by clamping the num_touch_reports value provided by the device to the maximum size of the touch_reports array.Show less

In the Linux kernel, the following vulnerability has been resolved: batman-adv: bla: put backbone reference on failed claim hash insert When batadv_bla_add_claim() fails to insert a new claim into the hash, it leaked a reference to the backbone_gw for which the claim was intended. Call batadv_backbone_gw_put() on the error path to release the reference and avoid leaking the backbone_gw object.Show less

In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Clear VRAM on allocation to prevent stale data exposure KFD VRAM allocations set AMDGPU_GEM_CREATE_VRAM_WIPE_ON_RELEASE but not AMDGPU_GEM_CREATE_VRAM_CLEARED, leaving freshly allocated VRAM with stale data from prior use observable by compute kernels. The GEM ioctl path already sets VRAM_CLEARED for all userspace allocations via amdgpu_gem_create_ioctl() and amdgpu_mode_dumb_create(). The KFD path was missing this flag, allowing stale page table remnants to leak into user buffers. This causes crashes in RCCL P2P transport where non-zero data in ptrExchange/head/tail fields corrupts the protocol handshake.Show less

In the Linux kernel, the following vulnerability has been resolved: spi: ch341: fix devres lifetime USB drivers bind to USB interfaces and any device managed resources should have their lifetime tied to the interface rather than parent USB device. This avoids issues like memory leaks when drivers are unbound without their devices being physically disconnected (e.g. on probe deferral or configuration changes). Fix the controller and driver data lifetime so that they are released on driver unbind. Note that this also makes sure that the SPI controller is placed correctly under the USB interface in the device tree.Show less

In the Linux kernel, the following vulnerability has been resolved: sctp: revalidate list cursor after sctp_sendmsg_to_asoc() in SCTP_SENDALL The SCTP_SENDALL path in sctp_sendmsg() iterates ep->asocs with list_for_each_entry_safe(), which caches the next entry in @tmp before the loop body runs. The body calls sctp_sendmsg_to_asoc(), which may drop the socket lock inside sctp_wait_for_sndbuf(). While the lock is dropped, another thread can SCTP_SOCKOPT_PEELOFF the association cached in @tmp, migrating it to a new endpoint via sctp_sock_migrate() (list_del_init() + list_add_tail() to newep->asocs), and optionally close the new socket which frees the association via kfree_rcu(). The cached @tmp can also be freed by a network ABORT for that association, processed in softirq while the lock is dropped. sctp_wait_for_sndbuf() revalidates @asoc (the current entry) on re-lock via the "sk != asoc->base.sk" and "asoc->base.dead" checks, but nothing revalidates @tmp. After a successful return, the iterator advances to the stale @tmp, yielding either a use-after-free (if the peeled socket was closed) or a list-walk onto the new endpoint's list head (type confusion of &newep->asocs as a struct sctp_association *). Both are reachable from CapEff=0; the type-confusion path gives controlled indirect call via the outqueue.sched->init_sid pointer. Fix by re-deriving @tmp from @asoc after sctp_sendmsg_to_asoc() returns. @asoc is known to still be on ep->asocs at that point: the only callers that list_del an association from ep->asocs are sctp_association_free() (which sets asoc->base.dead) and sctp_assoc_migrate() (which changes asoc->base.sk), and sctp_wait_for_sndbuf() checks both under the lock before any successful return; a tripped check propagates as err < 0 and the loop bails before the re-derive. The SCTP_ABORT path in sctp_sendmsg_check_sflags() returns 0 and the loop hits 'continue' before sctp_sendmsg_to_asoc() is ever called, so the @tmp cached by list_for_each_entry_safe() still covers the lock-held free that ba59fb027307 ("sctp: walk the list of asoc safely") was added for.Show less

In the Linux kernel, the following vulnerability has been resolved: drm/xe: Fix bo leak in xe_dma_buf_init_obj() on allocation failure When drm_gpuvm_resv_object_alloc() fails, the pre-allocated storage bo is not freed. Add xe_bo_free(storage) before returning the error. xe_dma_buf_init_obj() calls xe_bo_init_locked(), which frees the bo on error. Therefore, xe_dma_buf_init_obj() must also free the bo on its own error paths. Otherwise, since xe_gem_prime_import() cannot distinguish whether the failure originated from xe_dma_buf_init_obj() or from xe_bo_init_locked(), it cannot safely decide whether the bo should be freed. Add comments documenting the ownership semantics: on success, ownership of storage is transferred to the returned drm_gem_object; on failure, storage is freed before returning. v2: Add comments to explain the free logic. (cherry picked from commit 78a6c5f899f22338bbf48b44fb8950409c5a69b9)Show less

In the Linux kernel, the following vulnerability has been resolved: cgroup: Defer css percpu_ref kill on rmdir until cgroup is depopulated A chain of commits going back to v7.0 reworked rmdir to satisfy the controller invariant that a subsystem's ->css_offline() must not run while tasks are still doing kernel-side work in the cgroup. [1] d245698d727a ("cgroup: Defer task cgroup unlink until after the task is done switching out") [2] a72f73c4dd9b ("cgroup: Don't expose dead tasks in cgroup") [3] 1b164b876c36 ("cgroup: Wait for dying tasks to leave on rmdir") [4] 4c56a8ac6869 ("cgroup: Fix cgroup_drain_dying() testing the wrong condition") [5] 13e786b64bd3 ("cgroup: Increment nr_dying_subsys_* from rmdir context") [1] moved task cset unlink from do_exit() to finish_task_switch() so a task's cset link drops only after the task has fully stopped scheduling. That made tasks past exit_signals() linger on cset->tasks until their final context switch, which led to a series of problems as what userspace expected to see after rmdir diverged from what the kernel needs to wait for. [2]-[5] tried to bridge that divergence: [2] filtered the exiting tasks from cgroup.procs; [3] had rmdir(2) sleep in TASK_UNINTERRUPTIBLE for them; [4] fixed the wait's condition; [5] made nr_dying_subsys_* visible synchronously. The cgroup_drain_dying() wait in [3] turned out to be a dead end. When the rmdir caller is also the reaper of a zombie that pins a pidns teardown (e.g. host PID 1 systemd reaping orphan pids that were re-parented to it during the same teardown), rmdir blocks in TASK_UNINTERRUPTIBLE waiting for those pids to free, the pids can't free because PID 1 is the reaper and it's stuck in rmdir, and the system A-A deadlocks. No internal lock ordering breaks this; the wait itself is the bug. The css killing side that drove the original reorder, however, can be made cleanly asynchronous: ->css_offline() is already async, run from css_killed_work_fn() driven by percpu_ref_kill_and_confirm(). The fix is to make that chain start only after all tasks have left the cgroup. rmdir's user-visible side then returns as soon as cgroup.procs and friends are empty, while ->css_offline() still runs only after the cgroup is fully drained. Verified by the original reproducer (pidns teardown + zombie reaper, runs under vng) which hangs vanilla and succeeds here, and by per-commit deterministic repros for [2], [3], [4], [5] with a boot parameter that widens the post-exit_signals() window so each state is reliably reachable. Some stress tests on top of that. cgroup_apply_control_disable() has the same shape of pre-existing race: when a controller is disabled via subtree_control, kill_css() ran synchronously while tasks past exit_signals() could still be linked to the cgroup's csets, and ->css_offline() could fire before they drained. This patch preserves the existing synchronous behavior at that call site (kill_css_sync() + kill_css_finish() back-to-back) and a follow-up patch will defer kill_css_finish() there using a per-css trigger. This seems like the right approach and I don't see problems with it. The changes are somewhat invasive but not excessively so, so backporting to -stable should be okay. If something does turn out to be wrong, the fallback is to revert the entire chain ([1]-[5]) and rework in the development branch instead. v2: Pin cgrp across the deferred destroy work with explicit cgroup_get()/cgroup_put() around queue_work() and the work_fn. v1 wasn't actually broken (ordered cgroup_offline_wq + queue_work order in cgroup_task_dead() saved it) but the explicit ref removes the dependency on those non-obvious invariants. Also note the pre-existing cgroup_apply_control_disable() race in the description; a follow-up will defer kill_css_finish() there.Show less

In the Linux kernel, the following vulnerability has been resolved: media: rockchip: rkcif: Add missing MUST_CONNECT flag to pads The pads missed checks for connected devices which may a null dereference when the stream is enabled. Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020 pc : rkcif_interface_enable_streams+0x48/0xf0 lr : rkcif_interface_enable_streams+0x44/0xf0 Call trace: rkcif_interface_enable_streams+0x48/0xf0 v4l2_subdev_enable_streams+0x26c/0x3f0 rkcif_stream_start_streaming+0x140/0x278 vb2_start_streaming+0x74/0x188 vb2_core_streamon+0xe0/0x1d8 vb2_ioctl_streamon+0x60/0xa8 v4l_streamon+0x2c/0x40 __video_do_ioctl+0x34c/0x400 video_usercopy+0x2d0/0x800 video_ioctl2+0x20/0x60 v4l2_ioctl+0x48/0x78Show less

In the Linux kernel, the following vulnerability has been resolved: EDAC/versalnet: Fix device name memory leak The device name allocated via kzalloc() in init_one_mc() is assigned to dev->init_name but never freed on the normal removal path. device_register() copies init_name and then sets dev->init_name to NULL, so the name pointer becomes unreachable from the device. Thus leaking memory. Use a stack-local char array instead of using kzalloc() for name.Show less

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/sdma4: replace BUG_ON with WARN_ON in fence emission sdma_v4_0_ring_emit_fence() contains two BUG_ON(addr & 0x3) assertions that verify fence writeback addresses are dword-aligned. These assertions can be reached from unprivileged userspace via crafted DRM_IOCTL_AMDGPU_CS submissions, causing a fatal kernel panic in a scheduler worker thread. Replace both BUG_ON() calls with WARN_ON() to log the condition without crashing the kernel. A misaligned fence address at this point indicates a driver bug, but crashing the kernel is never the correct response when the assertion is reachable from userspace. The CS IOCTL path is the correct place to filter invalid submissions; the ring emission callback is too late to do anything about it. (cherry picked from commit b90250bd933afd1ba94d86d6b13821997b22b18e)Show less

In the Linux kernel, the following vulnerability has been resolved: spi: mpc52xx: fix use-after-free on unbind The state machine work is scheduled by the interrupt handler and therefore needs to be cancelled after disabling interrupts to avoid a potential use-after-free.Show less

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Add bounds checking to ib_{get,set}_value The uvd/vce/vcn code accesses the IB at predefined offsets without checking that the IB is large enough. Check the bounds here. The caller is responsible for making sure it can handle arbitrary return values. Also make the idx a uint32_t to prevent overflows causing the condition to fail.Show less

In the Linux kernel, the following vulnerability has been resolved: drm/xe/hdcp: Add NULL check for media_gt in intel_hdcp_gsc_check_status() When media GT is disabled via configfs, there is no allocation for media_gt, which is kept as NULL. In such scenario, intel_hdcp_gsc_check_status() results in a kernel pagefault error due to &gt->uc.gsc being evaluated as an invalid memory address. Fix that by introducing a NULL check on media_gt and bailing out early if so. While at it, also drop the NULL check for gsc, since it can't be NULL if media_gt is not NULL. v2: - Get address for gsc only after checking that gt is not NULL. (Shuicheng) - Drop the NULL check for gsc. (Shuicheng) v3: - Add "Fixes" and "Cc: <stable...>" tags. (Matt) (cherry picked from commit bfaf87e84ca3ca3f6e275f9ae56da47a8b55ffd1)Show less

In the Linux kernel, the following vulnerability has been resolved: drm: Set old handle to NULL before prime swap in change_handle There was a potential race condition in change_handle. The ioctl briefly had a single object with two idr entries; a concurrent gem_close could delete the object and remove one of the handles while leaving the other one dangling, which could subsequently be dereferenced for a use-after-free. To fix this, do the same dance that gem_close itself does. (f6cd7daecff5 drm: Release driver references to handle before making it available again) First idr_replace the old handle to NULL. Later, if the prime operations are successful, actually close it. create_tail required a similar dance to avoid a similar problem. (bd46cece51a3 drm/gem: Fix race in drm_gem_handle_create_tail()) It idr_allocs the new handle with NULL, then swaps in the correct object later to avoid races. We don't need to do that here, since the only operations that could race are drm_prime, and change_handle holds the prime lock for the entire duration. v2: cleanups of error pathsShow less

In the Linux kernel, the following vulnerability has been resolved: vsock/virtio: fix accept queue count leak on transport mismatch virtio_transport_recv_listen() calls sk_acceptq_added() before vsock_assign_transport(). If vsock_assign_transport() fails or selects a different transport, the error path returns without calling sk_acceptq_removed(), permanently incrementing sk_ack_backlog. After approximately backlog+1 such failures, sk_acceptq_is_full() returns true, causing the listener to reject all new connections. Fix by moving sk_acceptq_added() to after the transport validation, matching the pattern used by vmci_transport and hyperv_transport.Show less

In the Linux kernel, the following vulnerability has been resolved: HID: appletb-kbd: fix UAF in inactivity-timer cleanup path Commit 38224c472a03 ("HID: appletb-kbd: fix slab use-after-free bug in appletb_kbd_probe") added timer_delete_sync(&kbd->inactivity_timer) to both the probe close_hw error path and appletb_kbd_remove(), but the way it was wired in left the inactivity timer reachable during driver tear-down via two distinct windows. Window A -- put_device() before timer_delete_sync(): put_device(&kbd->backlight_dev->dev); timer_delete_sync(&kbd->inactivity_timer); The inactivity_timer softirq reads kbd->backlight_dev and calls backlight_device_set_brightness() -> mutex_lock(&ops_lock). If a concurrent hid_appletb_bl unbind drops the last devm reference between these two calls, the backlight_device is freed and the mutex_lock() touches freed memory. Window B -- backlight cleanup before hid_hw_stop(): if (kbd->backlight_dev) { timer_delete_sync(...); put_device(...); } hid_hw_close(hdev); hid_hw_stop(hdev); Even after Window A is closed, hid_hw_close()/hid_hw_stop() still run afterwards, so a late ".event" callback from the HID core (USB URB completion on real Apple hardware) can arrive after timer_delete_sync() drained the softirq but before put_device() drops the reference. That callback reaches reset_inactivity_timer(), which calls mod_timer() and re-arms the timer. The freshly re-armed timer can then fire on the about-to-be-freed backlight_device. Both windows produce the same KASAN slab-use-after-free: BUG: KASAN: slab-use-after-free in __mutex_lock+0x1aab/0x21c0 Read of size 8 at addr ffff88803ee9a108 by task swapper/0/0 Call Trace: <IRQ> __mutex_lock backlight_device_set_brightness appletb_inactivity_timer call_timer_fn run_timer_softirq handle_softirqs Allocated by task N: devm_backlight_device_register appletb_bl_probe Freed by task M: (concurrent hid_appletb_bl unbind path) Close both windows at once by reworking the tear-down in appletb_kbd_remove() and in the probe close_hw error path so that 1) hid_hw_close()/hid_hw_stop() run before the backlight cleanup, guaranteeing no further .event callback can fire and re-arm the timer, and 2) inside the "if (kbd->backlight_dev)" block, timer_delete_sync() runs before put_device(), so the softirq is drained before the final reference is dropped.Show less

In the Linux kernel, the following vulnerability has been resolved: batman-adv: bla: prevent use-after-free when deleting claims When batadv_bla_del_backbone_claims() removes all claims for a backbone, it does this by dropping the link entry in the hash list. This list entry itself was one of the references which need to be dropped at the same time via batadv_claim_put(). But the batadv_claim_put() must not be done before the last access to the claim object in this function. Otherwise the claim might be freed already by the batadv_claim_release() function before the list entry was dropped.Show less