Linux

In the Linux kernel, the following vulnerability has been resolved: nvmet-fc: avoid deadlock on delete association path When deleting an association the shutdown path is deadlocking because we try to flush the nvmet_wq nested. Avoid this by deadlock by deferring the put work into its own work item.Show less

In the Linux kernel, the following vulnerability has been resolved: LoongArch: Change acpi_core_pic[NR_CPUS] to acpi_core_pic[MAX_CORE_PIC] With default config, the value of NR_CPUS is 64. When HW platform has more then 64 cpus, system will crash on these platforms. MAX_CORE_PIC is the maximum cpu number in MADT table (max physical number) which can exceed the supported maximum cpu number (NR_CPUS, max logical number), but kernel should not crash. Kernel should boot cpus with NR_CPUS, let the remainder cpus stay in BIOS. The potential crash reason is that the array acpi_core_pic[NR_CPUS] can be overflowed when parsing MADT table, and it is obvious that CORE_PIC should be corresponding to physical core rather than logical core, so it is better to define the array as acpi_core_pic[MAX_CORE_PIC]. With the patch, system can boot up 64 vcpus with qemu parameter -smp 128, otherwise system will crash with the following message. [ 0.000000] CPU 0 Unable to handle kernel paging request at virtual address 0000420000004259, era == 90000000037a5f0c, ra == 90000000037a46ec [ 0.000000] Oops[#1]: [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 6.8.0-rc2+ #192 [ 0.000000] Hardware name: QEMU QEMU Virtual Machine, BIOS unknown 2/2/2022 [ 0.000000] pc 90000000037a5f0c ra 90000000037a46ec tp 9000000003c90000 sp 9000000003c93d60 [ 0.000000] a0 0000000000000019 a1 9000000003d93bc0 a2 0000000000000000 a3 9000000003c93bd8 [ 0.000000] a4 9000000003c93a74 a5 9000000083c93a67 a6 9000000003c938f0 a7 0000000000000005 [ 0.000000] t0 0000420000004201 t1 0000000000000000 t2 0000000000000001 t3 0000000000000001 [ 0.000000] t4 0000000000000003 t5 0000000000000000 t6 0000000000000030 t7 0000000000000063 [ 0.000000] t8 0000000000000014 u0 ffffffffffffffff s9 0000000000000000 s0 9000000003caee98 [ 0.000000] s1 90000000041b0480 s2 9000000003c93da0 s3 9000000003c93d98 s4 9000000003c93d90 [ 0.000000] s5 9000000003caa000 s6 000000000a7fd000 s7 000000000f556b60 s8 000000000e0a4330 [ 0.000000] ra: 90000000037a46ec platform_init+0x214/0x250 [ 0.000000] ERA: 90000000037a5f0c efi_runtime_init+0x30/0x94 [ 0.000000] CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE) [ 0.000000] PRMD: 00000000 (PPLV0 -PIE -PWE) [ 0.000000] EUEN: 00000000 (-FPE -SXE -ASXE -BTE) [ 0.000000] ECFG: 00070800 (LIE=11 VS=7) [ 0.000000] ESTAT: 00010000 [PIL] (IS= ECode=1 EsubCode=0) [ 0.000000] BADV: 0000420000004259 [ 0.000000] PRID: 0014c010 (Loongson-64bit, Loongson-3A5000) [ 0.000000] Modules linked in: [ 0.000000] Process swapper (pid: 0, threadinfo=(____ptrval____), task=(____ptrval____)) [ 0.000000] Stack : 9000000003c93a14 9000000003800898 90000000041844f8 90000000037a46ec [ 0.000000] 000000000a7fd000 0000000008290000 0000000000000000 0000000000000000 [ 0.000000] 0000000000000000 0000000000000000 00000000019d8000 000000000f556b60 [ 0.000000] 000000000a7fd000 000000000f556b08 9000000003ca7700 9000000003800000 [ 0.000000] 9000000003c93e50 9000000003800898 9000000003800108 90000000037a484c [ 0.000000] 000000000e0a4330 000000000f556b60 000000000a7fd000 000000000f556b08 [ 0.000000] 9000000003ca7700 9000000004184000 0000000000200000 000000000e02b018 [ 0.000000] 000000000a7fd000 90000000037a0790 9000000003800108 0000000000000000 [ 0.000000] 0000000000000000 000000000e0a4330 000000000f556b60 000000000a7fd000 [ 0.000000] 000000000f556b08 000000000eaae298 000000000eaa5040 0000000000200000 [ 0.000000] ... [ 0.000000] Call Trace: [ 0.000000] [<90000000037a5f0c>] efi_runtime_init+0x30/0x94 [ 0.000000] [<90000000037a46ec>] platform_init+0x214/0x250 [ 0.000000] [<90000000037a484c>] setup_arch+0x124/0x45c [ 0.000000] [<90000000037a0790>] start_kernel+0x90/0x670 [ 0.000000] [<900000000378b0d8>] kernel_entry+0xd8/0xdcShow less

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: fixed integer types and null check locations [why]: issues fixed: - comparison with wider integer type in loop condition which can cause infinite loops - pointer dereference before null checkShow less

In the Linux kernel, the following vulnerability has been resolved: IB/hfi1: Fix sdma.h tx->num_descs off-by-one error Unfortunately the commit `fd8958efe877` introduced another error causing the `descs` array to overflow. This reults in further crashes easily reproducible by `sendmsg` system call. [ 1080.836473] general protection fault, probably for non-canonical address 0x400300015528b00a: 0000 [#1] PREEMPT SMP PTI [ 1080.869326] RIP: 0010:hfi1_ipoib_build_ib_tx_headers.constprop.0+0xe1/0x2b0 [hfi1] -- [ 1080.974535] Call Trace: [ 1080.976990] <TASK> [ 1081.021929] hfi1_ipoib_send_dma_common+0x7a/0x2e0 [hfi1] [ 1081.027364] hfi1_ipoib_send_dma_list+0x62/0x270 [hfi1] [ 1081.032633] hfi1_ipoib_send+0x112/0x300 [hfi1] [ 1081.042001] ipoib_start_xmit+0x2a9/0x2d0 [ib_ipoib] [ 1081.046978] dev_hard_start_xmit+0xc4/0x210 -- [ 1081.148347] __sys_sendmsg+0x59/0xa0 crash> ipoib_txreq 0xffff9cfeba229f00 struct ipoib_txreq { txreq = { list = { next = 0xffff9cfeba229f00, prev = 0xffff9cfeba229f00 }, descp = 0xffff9cfeba229f40, coalesce_buf = 0x0, wait = 0xffff9cfea4e69a48, complete = 0xffffffffc0fe0760 <hfi1_ipoib_sdma_complete>, packet_len = 0x46d, tlen = 0x0, num_desc = 0x0, desc_limit = 0x6, next_descq_idx = 0x45c, coalesce_idx = 0x0, flags = 0x0, descs = {{ qw = {0x8024000120dffb00, 0x4} # SDMA_DESC0_FIRST_DESC_FLAG (bit 63) }, { qw = { 0x3800014231b108, 0x4} }, { qw = { 0x310000e4ee0fcf0, 0x8} }, { qw = { 0x3000012e9f8000, 0x8} }, { qw = { 0x59000dfb9d0000, 0x8} }, { qw = { 0x78000e02e40000, 0x8} }} }, sdma_hdr = 0x400300015528b000, <<< invalid pointer in the tx request structure sdma_status = 0x0, SDMA_DESC0_LAST_DESC_FLAG (bit 62) complete = 0x0, priv = 0x0, txq = 0xffff9cfea4e69880, skb = 0xffff9d099809f400 } If an SDMA send consists of exactly 6 descriptors and requires dword padding (in the 7th descriptor), the sdma_txreq descriptor array is not properly expanded and the packet will overflow into the container structure. This results in a panic when the send completion runs. The exact panic varies depending on what elements of the container structure get corrupted. The fix is to use the correct expression in _pad_sdma_tx_descs() to test the need to expand the descriptor array. With this patch the crashes are no longer reproducible and the machine is stable.Show less

In the Linux kernel, the following vulnerability has been resolved: LoongArch: Disable IRQ before init_fn() for nonboot CPUs Disable IRQ before init_fn() for nonboot CPUs when hotplug, in order to silence such warnings (and also avoid potential errors due to unexpected interrupts): WARNING: CPU: 1 PID: 0 at kernel/rcu/tree.c:4503 rcu_cpu_starting+0x214/0x280 CPU: 1 PID: 0 Comm: swapper/1 Not tainted 6.6.17+ #1198 pc 90000000048e3334 ra 90000000047bd56c tp 900000010039c000 sp 900000010039fdd0 a0 0000000000000001 a1 0000000000000006 a2 900000000802c040 a3 0000000000000000 a4 0000000000000001 a5 0000000000000004 a6 0000000000000000 a7 90000000048e3f4c t0 0000000000000001 t1 9000000005c70968 t2 0000000004000000 t3 000000000005e56e t4 00000000000002e4 t5 0000000000001000 t6 ffffffff80000000 t7 0000000000040000 t8 9000000007931638 u0 0000000000000006 s9 0000000000000004 s0 0000000000000001 s1 9000000006356ac0 s2 9000000007244000 s3 0000000000000001 s4 0000000000000001 s5 900000000636f000 s6 7fffffffffffffff s7 9000000002123940 s8 9000000001ca55f8 ra: 90000000047bd56c tlb_init+0x24c/0x528 ERA: 90000000048e3334 rcu_cpu_starting+0x214/0x280 CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE) PRMD: 00000000 (PPLV0 -PIE -PWE) EUEN: 00000000 (-FPE -SXE -ASXE -BTE) ECFG: 00071000 (LIE=12 VS=7) ESTAT: 000c0000 [BRK] (IS= ECode=12 EsubCode=0) PRID: 0014c010 (Loongson-64bit, Loongson-3A5000) CPU: 1 PID: 0 Comm: swapper/1 Not tainted 6.6.17+ #1198 Stack : 0000000000000000 9000000006375000 9000000005b61878 900000010039c000 900000010039fa30 0000000000000000 900000010039fa38 900000000619a140 9000000006456888 9000000006456880 900000010039f950 0000000000000001 0000000000000001 cb0cb028ec7e52e1 0000000002b90000 9000000100348700 0000000000000000 0000000000000001 ffffffff916d12f1 0000000000000003 0000000000040000 9000000007930370 0000000002b90000 0000000000000004 9000000006366000 900000000619a140 0000000000000000 0000000000000004 0000000000000000 0000000000000009 ffffffffffc681f2 9000000002123940 9000000001ca55f8 9000000006366000 90000000047a4828 00007ffff057ded8 00000000000000b0 0000000000000000 0000000000000000 0000000000071000 ... Call Trace: [<90000000047a4828>] show_stack+0x48/0x1a0 [<9000000005b61874>] dump_stack_lvl+0x84/0xcc [<90000000047f60ac>] __warn+0x8c/0x1e0 [<9000000005b0ab34>] report_bug+0x1b4/0x280 [<9000000005b63110>] do_bp+0x2d0/0x480 [<90000000047a2e20>] handle_bp+0x120/0x1c0 [<90000000048e3334>] rcu_cpu_starting+0x214/0x280 [<90000000047bd568>] tlb_init+0x248/0x528 [<90000000047a4c44>] per_cpu_trap_init+0x124/0x160 [<90000000047a19f4>] cpu_probe+0x494/0xa00 [<90000000047b551c>] start_secondary+0x3c/0xc0 [<9000000005b66134>] smpboot_entry+0x50/0x58Show less

In the Linux kernel, the following vulnerability has been resolved: fs/aio: Restrict kiocb_set_cancel_fn() to I/O submitted via libaio If kiocb_set_cancel_fn() is called for I/O submitted via io_uring, the following kernel warning appears: WARNING: CPU: 3 PID: 368 at fs/aio.c:598 kiocb_set_cancel_fn+0x9c/0xa8 Call trace: kiocb_set_cancel_fn+0x9c/0xa8 ffs_epfile_read_iter+0x144/0x1d0 io_read+0x19c/0x498 io_issue_sqe+0x118/0x27c io_submit_sqes+0x25c/0x5fc __arm64_sys_io_uring_enter+0x104/0xab0 invoke_syscall+0x58/0x11c el0_svc_common+0xb4/0xf4 do_el0_svc+0x2c/0xb0 el0_svc+0x2c/0xa4 el0t_64_sync_handler+0x68/0xb4 el0t_64_sync+0x1a4/0x1a8 Fix this by setting the IOCB_AIO_RW flag for read and write I/O that is submitted by libaio.Show less

In the Linux kernel, the following vulnerability has been resolved: dm-crypt: don't modify the data when using authenticated encryption It was said that authenticated encryption could produce invalid tag when the data that is being encrypted is modified [1]. So, fix this problem by copying the data into the clone bio first and then encrypt them inside the clone bio. This may reduce performance, but it is needed to prevent the user from corrupting the device by writing data with O_DIRECT and modifying them at the same time. [1] https://lore.kernel.org/all/20240207004723.GA35324@sol.localdomain/T/Show less

In the Linux kernel, the following vulnerability has been resolved: cxl/pci: Skip to handle RAS errors if CXL.mem device is detached The PCI AER model is an awkward fit for CXL error handling. While the expectation is that a PCI device can escalate to link reset to recover from an AER event, the same reset on CXL amounts to a surprise memory hotplug of massive amounts of memory. At present, the CXL error handler attempts some optimistic error handling to unbind the device from the cxl_mem driver after reaping some RAS register values. This results in a "hopeful" attempt to unplug the memory, but there is no guarantee that will succeed. A subsequent AER notification after the memdev unbind event can no longer assume the registers are mapped. Check for memdev bind before reaping status register values to avoid crashes of the form: BUG: unable to handle page fault for address: ffa00000195e9100 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page [...] RIP: 0010:__cxl_handle_ras+0x30/0x110 [cxl_core] [...] Call Trace: <TASK> ? __die+0x24/0x70 ? page_fault_oops+0x82/0x160 ? kernelmode_fixup_or_oops+0x84/0x110 ? exc_page_fault+0x113/0x170 ? asm_exc_page_fault+0x26/0x30 ? __pfx_dpc_reset_link+0x10/0x10 ? __cxl_handle_ras+0x30/0x110 [cxl_core] ? find_cxl_port+0x59/0x80 [cxl_core] cxl_handle_rp_ras+0xbc/0xd0 [cxl_core] cxl_error_detected+0x6c/0xf0 [cxl_core] report_error_detected+0xc7/0x1c0 pci_walk_bus+0x73/0x90 pcie_do_recovery+0x23f/0x330 Longer term, the unbind and PCI_ERS_RESULT_DISCONNECT behavior might need to be replaced with a new PCI_ERS_RESULT_PANIC.Show less

In the Linux kernel, the following vulnerability has been resolved: cxl/pci: Fix disabling memory if DVSEC CXL Range does not match a CFMWS window The Linux CXL subsystem is built on the assumption that HPA == SPA. That is, the host physical address (HPA) the HDM decoder registers are programmed with are system physical addresses (SPA). During HDM decoder setup, the DVSEC CXL range registers (cxl-3.1, 8.1.3.8) are checked if the memory is enabled and the CXL range is in a HPA window that is described in a CFMWS structure of the CXL host bridge (cxl-3.1, 9.18.1.3). Now, if the HPA is not an SPA, the CXL range does not match a CFMWS window and the CXL memory range will be disabled then. The HDM decoder stops working which causes system memory being disabled and further a system hang during HDM decoder initialization, typically when a CXL enabled kernel boots. Prevent a system hang and do not disable the HDM decoder if the decoder's CXL range is not found in a CFMWS window. Note the change only fixes a hardware hang, but does not implement HPA/SPA translation. Support for this can be added in a follow on patch series.Show less

In the Linux kernel, the following vulnerability has been resolved: scsi: target: pscsi: Fix bio_put() for error case As of commit 066ff571011d ("block: turn bio_kmalloc into a simple kmalloc wrapper"), a bio allocated by bio_kmalloc() must be freed by bio_uninit() and kfree(). That is not done properly for the error case, hitting WARN and NULL pointer dereference in bio_free().Show less

In the Linux kernel, the following vulnerability has been resolved: mm/swap: fix race when skipping swapcache When skipping swapcache for SWP_SYNCHRONOUS_IO, if two or more threads swapin the same entry at the same time, they get different pages (A, B). Before one thread (T0) finishes the swapin and installs page (A) to the PTE, another thread (T1) could finish swapin of page (B), swap_free the entry, then swap out the possibly modified page reusing the same entry. It breaks the pte_same check in (T0) because PTE value is unchanged, causing ABA problem. Thread (T0) will install a stalled page (A) into the PTE and cause data corruption. One possible callstack is like this: CPU0 CPU1 ---- ---- do_swap_page() do_swap_page() with same entry <direct swapin path> <direct swapin path> <alloc page A> <alloc page B> swap_read_folio() <- read to page A swap_read_folio() <- read to page B <slow on later locks or interrupt> <finished swapin first> ... set_pte_at() swap_free() <- entry is free <write to page B, now page A stalled> <swap out page B to same swap entry> pte_same() <- Check pass, PTE seems unchanged, but page A is stalled! swap_free() <- page B content lost! set_pte_at() <- staled page A installed! And besides, for ZRAM, swap_free() allows the swap device to discard the entry content, so even if page (B) is not modified, if swap_read_folio() on CPU0 happens later than swap_free() on CPU1, it may also cause data loss. To fix this, reuse swapcache_prepare which will pin the swap entry using the cache flag, and allow only one thread to swap it in, also prevent any parallel code from putting the entry in the cache. Release the pin after PT unlocked. Racers just loop and wait since it's a rare and very short event. A schedule_timeout_uninterruptible(1) call is added to avoid repeated page faults wasting too much CPU, causing livelock or adding too much noise to perf statistics. A similar livelock issue was described in commit 029c4628b2eb ("mm: swap: get rid of livelock in swapin readahead") Reproducer: This race issue can be triggered easily using a well constructed reproducer and patched brd (with a delay in read path) [1]: With latest 6.8 mainline, race caused data loss can be observed easily: $ gcc -g -lpthread test-thread-swap-race.c && ./a.out Polulating 32MB of memory region... Keep swapping out... Starting round 0... Spawning 65536 workers... 32746 workers spawned, wait for done... Round 0: Error on 0x5aa00, expected 32746, got 32743, 3 data loss! Round 0: Error on 0x395200, expected 32746, got 32743, 3 data loss! Round 0: Error on 0x3fd000, expected 32746, got 32737, 9 data loss! Round 0 Failed, 15 data loss! This reproducer spawns multiple threads sharing the same memory region using a small swap device. Every two threads updates mapped pages one by one in opposite direction trying to create a race, with one dedicated thread keep swapping out the data out using madvise. The reproducer created a reproduce rate of about once every 5 minutes, so the race should be totally possible in production. After this patch, I ran the reproducer for over a few hundred rounds and no data loss observed. Performance overhead is minimal, microbenchmark swapin 10G from 32G zram: Before: 10934698 us After: 11157121 us Cached: 13155355 us (Dropping SWP_SYNCHRONOUS_IO flag) [kasong@tencent.com: v4]Show less

In the Linux kernel, the following vulnerability has been resolved: md: Don't ignore suspended array in md_check_recovery() mddev_suspend() never stop sync_thread, hence it doesn't make sense to ignore suspended array in md_check_recovery(), which might cause sync_thread can't be unregistered. After commit f52f5c71f3d4 ("md: fix stopping sync thread"), following hang can be triggered by test shell/integrity-caching.sh: 1) suspend the array: raid_postsuspend mddev_suspend 2) stop the array: raid_dtr md_stop __md_stop_writes stop_sync_thread set_bit(MD_RECOVERY_INTR, &mddev->recovery); md_wakeup_thread_directly(mddev->sync_thread); wait_event(..., !test_bit(MD_RECOVERY_RUNNING, &mddev->recovery)) 3) sync thread done: md_do_sync set_bit(MD_RECOVERY_DONE, &mddev->recovery); md_wakeup_thread(mddev->thread); 4) daemon thread can't unregister sync thread: md_check_recovery if (mddev->suspended) return; -> return directly md_read_sync_thread clear_bit(MD_RECOVERY_RUNNING, &mddev->recovery); -> MD_RECOVERY_RUNNING can't be cleared, hence step 2 hang; This problem is not just related to dm-raid, fix it by ignoring suspended array in md_check_recovery(). And follow up patches will improve dm-raid better to frozen sync thread during suspend.Show less

In the Linux kernel, the following vulnerability has been resolved: md: Don't ignore read-only array in md_check_recovery() Usually if the array is not read-write, md_check_recovery() won't register new sync_thread in the first place. And if the array is read-write and sync_thread is registered, md_set_readonly() will unregister sync_thread before setting the array read-only. md/raid follow this behavior hence there is no problem. After commit f52f5c71f3d4 ("md: fix stopping sync thread"), following hang can be triggered by test shell/integrity-caching.sh: 1) array is read-only. dm-raid update super block: rs_update_sbs ro = mddev->ro mddev->ro = 0 -> set array read-write md_update_sb 2) register new sync thread concurrently. 3) dm-raid set array back to read-only: rs_update_sbs mddev->ro = ro 4) stop the array: raid_dtr md_stop stop_sync_thread set_bit(MD_RECOVERY_INTR, &mddev->recovery); md_wakeup_thread_directly(mddev->sync_thread); wait_event(..., !test_bit(MD_RECOVERY_RUNNING, &mddev->recovery)) 5) sync thread done: md_do_sync set_bit(MD_RECOVERY_DONE, &mddev->recovery); md_wakeup_thread(mddev->thread); 6) daemon thread can't unregister sync thread: md_check_recovery if (!md_is_rdwr(mddev) && !test_bit(MD_RECOVERY_NEEDED, &mddev->recovery)) return; -> -> MD_RECOVERY_RUNNING can't be cleared, hence step 4 hang; The root cause is that dm-raid manipulate 'mddev->ro' by itself, however, dm-raid really should stop sync thread before setting the array read-only. Unfortunately, I need to read more code before I can refacter the handler of 'mddev->ro' in dm-raid, hence let's fix the problem the easy way for now to prevent dm-raid regression.Show less

In the Linux kernel, the following vulnerability has been resolved: md: Don't register sync_thread for reshape directly Currently, if reshape is interrupted, then reassemble the array will register sync_thread directly from pers->run(), in this case 'MD_RECOVERY_RUNNING' is set directly, however, there is no guarantee that md_do_sync() will be executed, hence stop_sync_thread() will hang because 'MD_RECOVERY_RUNNING' can't be cleared. Last patch make sure that md_do_sync() will set MD_RECOVERY_DONE, however, following hang can still be triggered by dm-raid test shell/lvconvert-raid-reshape.sh occasionally: [root@fedora ~]# cat /proc/1982/stack [<0>] stop_sync_thread+0x1ab/0x270 [md_mod] [<0>] md_frozen_sync_thread+0x5c/0xa0 [md_mod] [<0>] raid_presuspend+0x1e/0x70 [dm_raid] [<0>] dm_table_presuspend_targets+0x40/0xb0 [dm_mod] [<0>] __dm_destroy+0x2a5/0x310 [dm_mod] [<0>] dm_destroy+0x16/0x30 [dm_mod] [<0>] dev_remove+0x165/0x290 [dm_mod] [<0>] ctl_ioctl+0x4bb/0x7b0 [dm_mod] [<0>] dm_ctl_ioctl+0x11/0x20 [dm_mod] [<0>] vfs_ioctl+0x21/0x60 [<0>] __x64_sys_ioctl+0xb9/0xe0 [<0>] do_syscall_64+0xc6/0x230 [<0>] entry_SYSCALL_64_after_hwframe+0x6c/0x74 Meanwhile mddev->recovery is: MD_RECOVERY_RUNNING | MD_RECOVERY_INTR | MD_RECOVERY_RESHAPE | MD_RECOVERY_FROZEN Fix this problem by remove the code to register sync_thread directly from raid10 and raid5. And let md_check_recovery() to register sync_thread.Show less

In the Linux kernel, the following vulnerability has been resolved: md: Don't suspend the array for interrupted reshape md_start_sync() will suspend the array if there are spares that can be added or removed from conf, however, if reshape is still in progress, this won't happen at all or data will be corrupted(remove_and_add_spares won't be called from md_choose_sync_action for reshape), hence there is no need to suspend the array if reshape is not done yet. Meanwhile, there is a potential deadlock for raid456: 1) reshape is interrupted; 2) set one of the disk WantReplacement, and add a new disk to the array, however, recovery won't start until the reshape is finished; 3) then issue an IO across reshpae position, this IO will wait for reshape to make progress; 4) continue to reshape, then md_start_sync() found there is a spare disk that can be added to conf, mddev_suspend() is called; Step 4 and step 3 is waiting for each other, deadlock triggered. Noted this problem is found by code review, and it's not reporduced yet. Fix this porblem by don't suspend the array for interrupted reshape, this is safe because conf won't be changed until reshape is done.Show less

In the Linux kernel, the following vulnerability has been resolved: gtp: fix use-after-free and null-ptr-deref in gtp_genl_dump_pdp() The gtp_net_ops pernet operations structure for the subsystem must be registered before registering the generic netlink family. Syzkaller hit 'general protection fault in gtp_genl_dump_pdp' bug: general protection fault, probably for non-canonical address 0xdffffc0000000002: 0000 [#1] PREEMPT SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017] CPU: 1 PID: 5826 Comm: gtp Not tainted 6.8.0-rc3-std-def-alt1 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.0-alt1 04/01/2014 RIP: 0010:gtp_genl_dump_pdp+0x1be/0x800 [gtp] Code: c6 89 c6 e8 64 e9 86 df 58 45 85 f6 0f 85 4e 04 00 00 e8 c5 ee 86 df 48 8b 54 24 18 48 b8 00 00 00 00 00 fc ff df 48 c1 ea 03 <80> 3c 02 00 0f 85 de 05 00 00 48 8b 44 24 18 4c 8b 30 4c 39 f0 74 RSP: 0018:ffff888014107220 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000002 RSI: 0000000000000000 RDI: 0000000000000000 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: ffff88800fcda588 R14: 0000000000000001 R15: 0000000000000000 FS: 00007f1be4eb05c0(0000) GS:ffff88806ce80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f1be4e766cf CR3: 000000000c33e000 CR4: 0000000000750ef0 PKRU: 55555554 Call Trace: <TASK> ? show_regs+0x90/0xa0 ? die_addr+0x50/0xd0 ? exc_general_protection+0x148/0x220 ? asm_exc_general_protection+0x22/0x30 ? gtp_genl_dump_pdp+0x1be/0x800 [gtp] ? __alloc_skb+0x1dd/0x350 ? __pfx___alloc_skb+0x10/0x10 genl_dumpit+0x11d/0x230 netlink_dump+0x5b9/0xce0 ? lockdep_hardirqs_on_prepare+0x253/0x430 ? __pfx_netlink_dump+0x10/0x10 ? kasan_save_track+0x10/0x40 ? __kasan_kmalloc+0x9b/0xa0 ? genl_start+0x675/0x970 __netlink_dump_start+0x6fc/0x9f0 genl_family_rcv_msg_dumpit+0x1bb/0x2d0 ? __pfx_genl_family_rcv_msg_dumpit+0x10/0x10 ? genl_op_from_small+0x2a/0x440 ? cap_capable+0x1d0/0x240 ? __pfx_genl_start+0x10/0x10 ? __pfx_genl_dumpit+0x10/0x10 ? __pfx_genl_done+0x10/0x10 ? security_capable+0x9d/0xe0Show less

In the Linux kernel, the following vulnerability has been resolved: crypto: virtio/akcipher - Fix stack overflow on memcpy sizeof(struct virtio_crypto_akcipher_session_para) is less than sizeof(struct virtio_crypto_op_ctrl_req::u), copying more bytes from stack variable leads stack overflow. Clang reports this issue by commands: make -j CC=clang-14 mrproper >/dev/null 2>&1 make -j O=/tmp/crypto-build CC=clang-14 allmodconfig >/dev/null 2>&1 make -j O=/tmp/crypto-build W=1 CC=clang-14 drivers/crypto/virtio/ virtio_crypto_akcipher_algs.oShow less

In the Linux kernel, the following vulnerability has been resolved: l2tp: pass correct message length to ip6_append_data l2tp_ip6_sendmsg needs to avoid accounting for the transport header twice when splicing more data into an already partially-occupied skbuff. To manage this, we check whether the skbuff contains data using skb_queue_empty when deciding how much data to append using ip6_append_data. However, the code which performed the calculation was incorrect: ulen = len + skb_queue_empty(&sk->sk_write_queue) ? transhdrlen : 0; ...due to C operator precedence, this ends up setting ulen to transhdrlen for messages with a non-zero length, which results in corrupted packets on the wire. Add parentheses to correct the calculation in line with the original intent.Show less

In the Linux kernel, the following vulnerability has been resolved: ARM: ep93xx: Add terminator to gpiod_lookup_table Without the terminator, if a con_id is passed to gpio_find() that does not exist in the lookup table the function will not stop looping correctly, and eventually cause an oops.Show less

In the Linux kernel, the following vulnerability has been resolved: usb: cdns3: fixed memory use after free at cdns3_gadget_ep_disable() ... cdns3_gadget_ep_free_request(&priv_ep->endpoint, &priv_req->request); list_del_init(&priv_req->list); ... 'priv_req' actually free at cdns3_gadget_ep_free_request(). But list_del_init() use priv_req->list after it. [ 1542.642868][ T534] BUG: KFENCE: use-after-free read in __list_del_entry_valid+0x10/0xd4 [ 1542.642868][ T534] [ 1542.653162][ T534] Use-after-free read at 0x000000009ed0ba99 (in kfence-#3): [ 1542.660311][ T534] __list_del_entry_valid+0x10/0xd4 [ 1542.665375][ T534] cdns3_gadget_ep_disable+0x1f8/0x388 [cdns3] [ 1542.671571][ T534] usb_ep_disable+0x44/0xe4 [ 1542.675948][ T534] ffs_func_eps_disable+0x64/0xc8 [ 1542.680839][ T534] ffs_func_set_alt+0x74/0x368 [ 1542.685478][ T534] ffs_func_disable+0x18/0x28 Move list_del_init() before cdns3_gadget_ep_free_request() to resolve this problem.Show less