In the Linux kernel, the following vulnerability has been resolved:
i40e: Do not allow untrusted VF to remove administratively set MAC
Currently when PF administratively sets VF's MAC address and the VF
is put down (VF...Show moreIn the Linux kernel, the following vulnerability has been resolved:
i40e: Do not allow untrusted VF to remove administratively set MAC
Currently when PF administratively sets VF's MAC address and the VF
is put down (VF tries to delete all MACs) then the MAC is removed
from MAC filters and primary VF MAC is zeroed.
Do not allow untrusted VF to remove primary MAC when it was set
administratively by PF.
Reproducer:
1) Create VF
2) Set VF interface up
3) Administratively set the VF's MAC
4) Put VF interface down
[root@host ~]# echo 1 > /sys/class/net/enp2s0f0/device/sriov_numvfs
[root@host ~]# ip link set enp2s0f0v0 up
[root@host ~]# ip link set enp2s0f0 vf 0 mac fe:6c:b5:da:c7:7d
[root@host ~]# ip link show enp2s0f0
23: enp2s0f0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT group default qlen 1000
link/ether 3c:ec:ef:b7:dd:04 brd ff:ff:ff:ff:ff:ff
vf 0 link/ether fe:6c:b5:da:c7:7d brd ff:ff:ff:ff:ff:ff, spoof checking on, link-state auto, trust off
[root@host ~]# ip link set enp2s0f0v0 down
[root@host ~]# ip link show enp2s0f0
23: enp2s0f0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT group default qlen 1000
link/ether 3c:ec:ef:b7:dd:04 brd ff:ff:ff:ff:ff:ff
vf 0 link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff, spoof checking on, link-state auto, trust offShow less |
In the Linux kernel, the following vulnerability has been resolved:
media: ir_toy: fix a memleak in irtoy_tx
When irtoy_command fails, buf should be freed since it is allocated by
irtoy_tx, or there is a memleak. |
In the Linux kernel, the following vulnerability has been resolved:
cifs: fix underflow in parse_server_interfaces()
In this loop, we step through the buffer and after each item we check
if the size_left is greater tha...Show moreIn the Linux kernel, the following vulnerability has been resolved:
cifs: fix underflow in parse_server_interfaces()
In this loop, we step through the buffer and after each item we check
if the size_left is greater than the minimum size we need. However,
the problem is that "bytes_left" is type ssize_t while sizeof() is type
size_t. That means that because of type promotion, the comparison is
done as an unsigned and if we have negative bytes left the loop
continues instead of ending.Show less |
In the Linux kernel, the following vulnerability has been resolved:
mptcp: fix data re-injection from stale subflow
When the MPTCP PM detects that a subflow is stale, all the packet
scheduler must re-inject all the mpt...Show moreIn the Linux kernel, the following vulnerability has been resolved:
mptcp: fix data re-injection from stale subflow
When the MPTCP PM detects that a subflow is stale, all the packet
scheduler must re-inject all the mptcp-level unacked data. To avoid
acquiring unneeded locks, it first try to check if any unacked data
is present at all in the RTX queue, but such check is currently
broken, as it uses TCP-specific helper on an MPTCP socket.
Funnily enough fuzzers and static checkers are happy, as the accessed
memory still belongs to the mptcp_sock struct, and even from a
functional perspective the recovery completed successfully, as
the short-cut test always failed.
A recent unrelated TCP change - commit d5fed5addb2b ("tcp: reorganize
tcp_sock fast path variables") - exposed the issue, as the tcp field
reorganization makes the mptcp code always skip the re-inection.
Fix the issue dropping the bogus call: we are on a slow path, the early
optimization proved once again to be evil.Show less |
In the Linux kernel, the following vulnerability has been resolved:
nfc: nci: free rx_data_reassembly skb on NCI device cleanup
rx_data_reassembly skb is stored during NCI data exchange for processing
fragmented packet...Show moreIn the Linux kernel, the following vulnerability has been resolved:
nfc: nci: free rx_data_reassembly skb on NCI device cleanup
rx_data_reassembly skb is stored during NCI data exchange for processing
fragmented packets. It is dropped only when the last fragment is processed
or when an NTF packet with NCI_OP_RF_DEACTIVATE_NTF opcode is received.
However, the NCI device may be deallocated before that which leads to skb
leak.
As by design the rx_data_reassembly skb is bound to the NCI device and
nothing prevents the device to be freed before the skb is processed in
some way and cleaned, free it on the NCI device cleanup.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.Show less |
In the Linux kernel, the following vulnerability has been resolved:
crypto: algif_hash - Remove bogus SGL free on zero-length error path
When a zero-length message is hashed by algif_hash, and an error
is triggered, it...Show moreIn the Linux kernel, the following vulnerability has been resolved:
crypto: algif_hash - Remove bogus SGL free on zero-length error path
When a zero-length message is hashed by algif_hash, and an error
is triggered, it tries to free an SG list that was never allocated
in the first place. Fix this by not freeing the SG list on the
zero-length error path.Show less |
In the Linux kernel, the following vulnerability has been resolved:
irqchip/gic-v3-its: Restore quirk probing for ACPI-based systems
While refactoring the way the ITSs are probed, the handling of quirks
applicable to A...Show moreIn the Linux kernel, the following vulnerability has been resolved:
irqchip/gic-v3-its: Restore quirk probing for ACPI-based systems
While refactoring the way the ITSs are probed, the handling of quirks
applicable to ACPI-based platforms was lost. As a result, systems such as
HIP07 lose their GICv4 functionnality, and some other may even fail to
boot, unless they are configured to boot with DT.
Move the enabling of quirks into its_probe_one(), making it common to all
firmware implementations.Show less |
In the Linux kernel, the following vulnerability has been resolved:
smb: client: set correct id, uid and cruid for multiuser automounts
When uid, gid and cruid are not specified, we need to dynamically
set them into th...Show moreIn the Linux kernel, the following vulnerability has been resolved:
smb: client: set correct id, uid and cruid for multiuser automounts
When uid, gid and cruid are not specified, we need to dynamically
set them into the filesystem context used for automounting otherwise
they'll end up reusing the values from the parent mount.Show less |
In the Linux kernel, the following vulnerability has been resolved:
hv_netvsc: Register VF in netvsc_probe if NET_DEVICE_REGISTER missed
If hv_netvsc driver is unloaded and reloaded, the NET_DEVICE_REGISTER
handler can...Show moreIn the Linux kernel, the following vulnerability has been resolved:
hv_netvsc: Register VF in netvsc_probe if NET_DEVICE_REGISTER missed
If hv_netvsc driver is unloaded and reloaded, the NET_DEVICE_REGISTER
handler cannot perform VF register successfully as the register call
is received before netvsc_probe is finished. This is because we
register register_netdevice_notifier() very early( even before
vmbus_driver_register()).
To fix this, we try to register each such matching VF( if it is visible
as a netdevice) at the end of netvsc_probe.Show less |
In the Linux kernel, the following vulnerability has been resolved:
tools/rtla: Fix clang warning about mount_point var size
clang is reporting this warning:
$ make HOSTCC=clang CC=clang LLVM_IAS=1
[...]
clang -O -g -...Show moreIn the Linux kernel, the following vulnerability has been resolved:
tools/rtla: Fix clang warning about mount_point var size
clang is reporting this warning:
$ make HOSTCC=clang CC=clang LLVM_IAS=1
[...]
clang -O -g -DVERSION=\"6.8.0-rc3\" -flto=auto -fexceptions
-fstack-protector-strong -fasynchronous-unwind-tables
-fstack-clash-protection -Wall -Werror=format-security
-Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS
$(pkg-config --cflags libtracefs) -c -o src/utils.o src/utils.c
src/utils.c:548:66: warning: 'fscanf' may overflow; destination buffer in argument 3 has size 1024, but the corresponding specifier may require size 1025 [-Wfortify-source]
548 | while (fscanf(fp, "%*s %" STR(MAX_PATH) "s %99s %*s %*d %*d\n", mount_point, type) == 2) {
| ^
Increase mount_point variable size to MAX_PATH+1 to avoid the overflow.Show less |
In the Linux kernel, the following vulnerability has been resolved:
iio: core: fix memleak in iio_device_register_sysfs
When iio_device_register_sysfs_group() fails, we should
free iio_dev_opaque->chan_attr_group.attrs...Show moreIn the Linux kernel, the following vulnerability has been resolved:
iio: core: fix memleak in iio_device_register_sysfs
When iio_device_register_sysfs_group() fails, we should
free iio_dev_opaque->chan_attr_group.attrs to prevent
potential memleak.Show less |
In the Linux kernel, the following vulnerability has been resolved:
media: rc: bpf attach/detach requires write permission
Note that bpf attach/detach also requires CAP_NET_ADMIN. |
In the Linux kernel, the following vulnerability has been resolved:
amdkfd: use calloc instead of kzalloc to avoid integer overflow
This uses calloc instead of doing the multiplication which might
overflow. |
In the Linux kernel, the following vulnerability has been resolved:
scsi: scsi_debug: Fix out-of-bound read in resp_report_tgtpgs()
The following issue was observed running syzkaller:
BUG: KASAN: slab-out-of-bounds in...Show moreIn the Linux kernel, the following vulnerability has been resolved:
scsi: scsi_debug: Fix out-of-bound read in resp_report_tgtpgs()
The following issue was observed running syzkaller:
BUG: KASAN: slab-out-of-bounds in memcpy include/linux/string.h:377 [inline]
BUG: KASAN: slab-out-of-bounds in sg_copy_buffer+0x150/0x1c0 lib/scatterlist.c:831
Read of size 2132 at addr ffff8880aea95dc8 by task syz-executor.0/9815
CPU: 0 PID: 9815 Comm: syz-executor.0 Not tainted 4.19.202-00874-gfc0fe04215a9 #2
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0xe4/0x14a lib/dump_stack.c:118
print_address_description+0x73/0x280 mm/kasan/report.c:253
kasan_report_error mm/kasan/report.c:352 [inline]
kasan_report+0x272/0x370 mm/kasan/report.c:410
memcpy+0x1f/0x50 mm/kasan/kasan.c:302
memcpy include/linux/string.h:377 [inline]
sg_copy_buffer+0x150/0x1c0 lib/scatterlist.c:831
fill_from_dev_buffer+0x14f/0x340 drivers/scsi/scsi_debug.c:1021
resp_report_tgtpgs+0x5aa/0x770 drivers/scsi/scsi_debug.c:1772
schedule_resp+0x464/0x12f0 drivers/scsi/scsi_debug.c:4429
scsi_debug_queuecommand+0x467/0x1390 drivers/scsi/scsi_debug.c:5835
scsi_dispatch_cmd+0x3fc/0x9b0 drivers/scsi/scsi_lib.c:1896
scsi_request_fn+0x1042/0x1810 drivers/scsi/scsi_lib.c:2034
__blk_run_queue_uncond block/blk-core.c:464 [inline]
__blk_run_queue+0x1a4/0x380 block/blk-core.c:484
blk_execute_rq_nowait+0x1c2/0x2d0 block/blk-exec.c:78
sg_common_write.isra.19+0xd74/0x1dc0 drivers/scsi/sg.c:847
sg_write.part.23+0x6e0/0xd00 drivers/scsi/sg.c:716
sg_write+0x64/0xa0 drivers/scsi/sg.c:622
__vfs_write+0xed/0x690 fs/read_write.c:485
kill_bdev:block_device:00000000e138492c
vfs_write+0x184/0x4c0 fs/read_write.c:549
ksys_write+0x107/0x240 fs/read_write.c:599
do_syscall_64+0xc2/0x560 arch/x86/entry/common.c:293
entry_SYSCALL_64_after_hwframe+0x49/0xbe
We get 'alen' from command its type is int. If userspace passes a large
length we will get a negative 'alen'.
Switch n, alen, and rlen to u32.Show less |
In the Linux kernel, the following vulnerability has been resolved:
selinux: fix NULL-pointer dereference when hashtab allocation fails
When the hash table slot array allocation fails in hashtab_init(),
h->size is left...Show moreIn the Linux kernel, the following vulnerability has been resolved:
selinux: fix NULL-pointer dereference when hashtab allocation fails
When the hash table slot array allocation fails in hashtab_init(),
h->size is left initialized with a non-zero value, but the h->htable
pointer is NULL. This may then cause a NULL pointer dereference, since
the policydb code relies on the assumption that even after a failed
hashtab_init(), hashtab_map() and hashtab_destroy() can be safely called
on it. Yet, these detect an empty hashtab only by looking at the size.
Fix this by making sure that hashtab_init() always leaves behind a valid
empty hashtab when the allocation fails.Show less |
In the Linux kernel, the following vulnerability has been resolved:
x86/hyperv: Fix NULL deref in set_hv_tscchange_cb() if Hyper-V setup fails
Check for a valid hv_vp_index array prior to derefencing hv_vp_index when
s...Show moreIn the Linux kernel, the following vulnerability has been resolved:
x86/hyperv: Fix NULL deref in set_hv_tscchange_cb() if Hyper-V setup fails
Check for a valid hv_vp_index array prior to derefencing hv_vp_index when
setting Hyper-V's TSC change callback. If Hyper-V setup failed in
hyperv_init(), the kernel will still report that it's running under
Hyper-V, but will have silently disabled nearly all functionality.
BUG: kernel NULL pointer dereference, address: 0000000000000010
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] SMP
CPU: 4 PID: 1 Comm: swapper/0 Not tainted 5.15.0-rc2+ #75
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
RIP: 0010:set_hv_tscchange_cb+0x15/0xa0
Code: <8b> 04 82 8b 15 12 17 85 01 48 c1 e0 20 48 0d ee 00 01 00 f6 c6 08
...
Call Trace:
kvm_arch_init+0x17c/0x280
kvm_init+0x31/0x330
vmx_init+0xba/0x13a
do_one_initcall+0x41/0x1c0
kernel_init_freeable+0x1f2/0x23b
kernel_init+0x16/0x120
ret_from_fork+0x22/0x30Show less |
In the Linux kernel, the following vulnerability has been resolved:
scsi: advansys: Fix kernel pointer leak
Pointers should be printed with %p or %px rather than cast to 'unsigned
long' and printed with %lx.
Change %l...Show moreIn the Linux kernel, the following vulnerability has been resolved:
scsi: advansys: Fix kernel pointer leak
Pointers should be printed with %p or %px rather than cast to 'unsigned
long' and printed with %lx.
Change %lx to %p to print the hashed pointer.Show less |
In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: kTLS, Fix crash in RX resync flow
For the TLS RX resync flow, we maintain a list of TLS contexts
that require some attention, to communicat...Show moreIn the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: kTLS, Fix crash in RX resync flow
For the TLS RX resync flow, we maintain a list of TLS contexts
that require some attention, to communicate their resync information
to the HW.
Here we fix list corruptions, by protecting the entries against
movements coming from resync_handle_seq_match(), until their resync
handling in napi is fully completed.Show less |
In the Linux kernel, the following vulnerability has been resolved:
hugetlb, userfaultfd: fix reservation restore on userfaultfd error
Currently in the is_continue case in hugetlb_mcopy_atomic_pte(), if we
bail out usi...Show moreIn the Linux kernel, the following vulnerability has been resolved:
hugetlb, userfaultfd: fix reservation restore on userfaultfd error
Currently in the is_continue case in hugetlb_mcopy_atomic_pte(), if we
bail out using "goto out_release_unlock;" in the cases where idx >=
size, or !huge_pte_none(), the code will detect that new_pagecache_page
== false, and so call restore_reserve_on_error(). In this case I see
restore_reserve_on_error() delete the reservation, and the following
call to remove_inode_hugepages() will increment h->resv_hugepages
causing a 100% reproducible leak.
We should treat the is_continue case similar to adding a page into the
pagecache and set new_pagecache_page to true, to indicate that there is
no reservation to restore on the error path, and we need not call
restore_reserve_on_error(). Rename new_pagecache_page to
page_in_pagecache to make that clear.Show less |
In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: Update error handler for UCTX and UMEM
In the fast unload flow, the device state is set to internal error,
which indicates that the driver s...Show moreIn the Linux kernel, the following vulnerability has been resolved:
net/mlx5: Update error handler for UCTX and UMEM
In the fast unload flow, the device state is set to internal error,
which indicates that the driver started the destroy process.
In this case, when a destroy command is being executed, it should return
MLX5_CMD_STAT_OK.
Fix MLX5_CMD_OP_DESTROY_UCTX and MLX5_CMD_OP_DESTROY_UMEM to return OK
instead of EIO.
This fixes a call trace in the umem release process -
[ 2633.536695] Call Trace:
[ 2633.537518] ib_uverbs_remove_one+0xc3/0x140 [ib_uverbs]
[ 2633.538596] remove_client_context+0x8b/0xd0 [ib_core]
[ 2633.539641] disable_device+0x8c/0x130 [ib_core]
[ 2633.540615] __ib_unregister_device+0x35/0xa0 [ib_core]
[ 2633.541640] ib_unregister_device+0x21/0x30 [ib_core]
[ 2633.542663] __mlx5_ib_remove+0x38/0x90 [mlx5_ib]
[ 2633.543640] auxiliary_bus_remove+0x1e/0x30 [auxiliary]
[ 2633.544661] device_release_driver_internal+0x103/0x1f0
[ 2633.545679] bus_remove_device+0xf7/0x170
[ 2633.546640] device_del+0x181/0x410
[ 2633.547606] mlx5_rescan_drivers_locked.part.10+0x63/0x160 [mlx5_core]
[ 2633.548777] mlx5_unregister_device+0x27/0x40 [mlx5_core]
[ 2633.549841] mlx5_uninit_one+0x21/0xc0 [mlx5_core]
[ 2633.550864] remove_one+0x69/0xe0 [mlx5_core]
[ 2633.551819] pci_device_remove+0x3b/0xc0
[ 2633.552731] device_release_driver_internal+0x103/0x1f0
[ 2633.553746] unbind_store+0xf6/0x130
[ 2633.554657] kernfs_fop_write+0x116/0x190
[ 2633.555567] vfs_write+0xa5/0x1a0
[ 2633.556407] ksys_write+0x4f/0xb0
[ 2633.557233] do_syscall_64+0x5b/0x1a0
[ 2633.558071] entry_SYSCALL_64_after_hwframe+0x65/0xca
[ 2633.559018] RIP: 0033:0x7f9977132648
[ 2633.559821] Code: 89 02 48 c7 c0 ff ff ff ff eb b3 0f 1f 80 00 00 00 00 f3 0f 1e fa 48 8d 05 55 6f 2d 00 8b 00 85 c0 75 17 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 58 c3 0f 1f 80 00 00 00 00 41 54 49 89 d4 55
[ 2633.562332] RSP: 002b:00007fffb1a83888 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
[ 2633.563472] RAX: ffffffffffffffda RBX: 000000000000000c RCX: 00007f9977132648
[ 2633.564541] RDX: 000000000000000c RSI: 000055b90546e230 RDI: 0000000000000001
[ 2633.565596] RBP: 000055b90546e230 R08: 00007f9977406860 R09: 00007f9977a54740
[ 2633.566653] R10: 0000000000000000 R11: 0000000000000246 R12: 00007f99774056e0
[ 2633.567692] R13: 000000000000000c R14: 00007f9977400880 R15: 000000000000000c
[ 2633.568725] ---[ end trace 10b4fe52945e544d ]---Show less |