Linux

In the Linux kernel, the following vulnerability has been resolved: dmaengine: xilinx: xdma: Fix regmap init error handling devm_regmap_init_mmio returns an ERR_PTR() upon error, not NULL. Fix the error check and also fix the error message. Use the error code from ERR_PTR() instead of the wrong value in ret.Show less

In the Linux kernel, the following vulnerability has been resolved: netfs: Fix kernel BUG in netfs_limit_iter() for ITER_KVEC iterators When a process crashes and the kernel writes a core dump to a 9P filesystem, __kernel_write() creates an ITER_KVEC iterator. This iterator reaches netfs_limit_iter() via netfs_unbuffered_write(), which only handles ITER_FOLIOQ, ITER_BVEC and ITER_XARRAY iterator types, hitting the BUG() for any other type. Fix this by adding netfs_limit_kvec() following the same pattern as netfs_limit_bvec(), since both kvec and bvec are simple segment arrays with pointer and length fields. Dispatch it from netfs_limit_iter() when the iterator type is ITER_KVEC.Show less

In the Linux kernel, the following vulnerability has been resolved: netfs: Fix NULL pointer dereference in netfs_unbuffered_write() on retry When a write subrequest is marked NETFS_SREQ_NEED_RETRY, the retry path in netfs_unbuffered_write() unconditionally calls stream->prepare_write() without checking if it is NULL. Filesystems such as 9P do not set the prepare_write operation, so stream->prepare_write remains NULL. When get_user_pages() fails with -EFAULT and the subrequest is flagged for retry, this results in a NULL pointer dereference at fs/netfs/direct_write.c:189. Fix this by mirroring the pattern already used in write_retry.c: if stream->prepare_write is NULL, skip renegotiation and directly reissue the subrequest via netfs_reissue_write(), which handles iterator reset, IN_PROGRESS flag, stats update and reissue internally.Show less

In the Linux kernel, the following vulnerability has been resolved: dmaengine: idxd: fix possible wrong descriptor completion in llist_abort_desc() At the end of this function, d is the traversal cursor of flist, but the code completes found instead. This can lead to issues such as NULL pointer dereferences, double completion, or descriptor leaks. Fix this by completing d instead of found in the final list_for_each_entry_safe() loop.Show less

In the Linux kernel, the following vulnerability has been resolved: netfs: Fix read abandonment during retry Under certain circumstances, all the remaining subrequests from a read request will get abandoned during retry. The abandonment process expects the 'subreq' variable to be set to the place to start abandonment from, but it doesn't always have a useful value (it will be uninitialised on the first pass through the loop and it may point to a deleted subrequest on later passes). Fix the first jump to "abandon:" to set subreq to the start of the first subrequest expected to need retry (which, in this abandonment case, turned out unexpectedly to no longer have NEED_RETRY set). Also clear the subreq pointer after discarding superfluous retryable subrequests to cause an oops if we do try to access it.Show less

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix leak of kobject name for sub-group space_info When create_space_info_sub_group() allocates elements of space_info->sub_group[], kobject_init_and_add() is called for each element via btrfs_sysfs_add_space_info_type(). However, when check_removing_space_info() frees these elements, it does not call btrfs_sysfs_remove_space_info() on them. As a result, kobject_put() is not called and the associated kobj->name objects are leaked. This memory leak is reproduced by running the blktests test case zbd/009 on kernels built with CONFIG_DEBUG_KMEMLEAK. The kmemleak feature reports the following error: unreferenced object 0xffff888112877d40 (size 16): comm "mount", pid 1244, jiffies 4294996972 hex dump (first 16 bytes): 64 61 74 61 2d 72 65 6c 6f 63 00 c4 c6 a7 cb 7f data-reloc...... backtrace (crc 53ffde4d): __kmalloc_node_track_caller_noprof+0x619/0x870 kstrdup+0x42/0xc0 kobject_set_name_vargs+0x44/0x110 kobject_init_and_add+0xcf/0x150 btrfs_sysfs_add_space_info_type+0xfc/0x210 [btrfs] create_space_info_sub_group.constprop.0+0xfb/0x1b0 [btrfs] create_space_info+0x211/0x320 [btrfs] btrfs_init_space_info+0x15a/0x1b0 [btrfs] open_ctree+0x33c7/0x4a50 [btrfs] btrfs_get_tree.cold+0x9f/0x1ee [btrfs] vfs_get_tree+0x87/0x2f0 vfs_cmd_create+0xbd/0x280 __do_sys_fsconfig+0x3df/0x990 do_syscall_64+0x136/0x1540 entry_SYSCALL_64_after_hwframe+0x76/0x7e To avoid the leak, call btrfs_sysfs_remove_space_info() instead of kfree() for the elements.Show less

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix OOB write in QUERY_INFO for compound requests When a compound request such as READ + QUERY_INFO(Security) is received, and the first command (READ) consumes most of the response buffer, ksmbd could write beyond the allocated buffer while building a security descriptor. The root cause was that smb2_get_info_sec() checked buffer space using ppntsd_size from xattr, while build_sec_desc() often synthesized a significantly larger descriptor from POSIX ACLs. This patch introduces smb_acl_sec_desc_scratch_len() to accurately compute the final descriptor size beforehand, performs proper buffer checking with smb2_calc_max_out_buf_len(), and uses exact-sized allocation + iov pinning.Show less

In the Linux kernel, the following vulnerability has been resolved: crypto: algif_aead - Revert to operating out-of-place This mostly reverts commit 72548b093ee3 except for the copying of the associated data. There is no benefit in operating in-place in algif_aead since the source and destination come from different mappings. Get rid of all the complexity added for in-place operation and just copy the AD directly.Show less

In the Linux kernel, the following vulnerability has been resolved: X.509: Fix out-of-bounds access when parsing extensions Leo reports an out-of-bounds access when parsing a certificate with empty Basic Constraints or Key Usage extension because the first byte of the extension is read before checking its length. Fix it. The bug can be triggered by an unprivileged user by submitting a specially crafted certificate to the kernel through the keyrings(7) API. Leo has demonstrated this with a proof-of-concept program responsibly disclosed off-list.Show less

In the Linux kernel, the following vulnerability has been resolved: net: skb: fix cross-cache free of KFENCE-allocated skb head SKB_SMALL_HEAD_CACHE_SIZE is intentionally set to a non-power-of-2 value (e.g. 704 on x86_64) to avoid collisions with generic kmalloc bucket sizes. This ensures that skb_kfree_head() can reliably use skb_end_offset to distinguish skb heads allocated from skb_small_head_cache vs. generic kmalloc caches. However, when KFENCE is enabled, kfence_ksize() returns the exact requested allocation size instead of the slab bucket size. If a caller (e.g. bpf_test_init) allocates skb head data via kzalloc() and the requested size happens to equal SKB_SMALL_HEAD_CACHE_SIZE, then slab_build_skb() -> ksize() returns that exact value. After subtracting skb_shared_info overhead, skb_end_offset ends up matching SKB_SMALL_HEAD_HEADROOM, causing skb_kfree_head() to incorrectly free the object to skb_small_head_cache instead of back to the original kmalloc cache, resulting in a slab cross-cache free: kmem_cache_free(skbuff_small_head): Wrong slab cache. Expected skbuff_small_head but got kmalloc-1k Fix this by always calling kfree(head) in skb_kfree_head(). This keeps the free path generic and avoids allocator-specific misclassification for KFENCE objects.Show less

In the Linux kernel, the following vulnerability has been resolved: netfilter: nfnetlink_log: fix uninitialized padding leak in NFULA_PAYLOAD __build_packet_message() manually constructs the NFULA_PAYLOAD netlink attribute using skb_put() and skb_copy_bits(), bypassing the standard nla_reserve()/nla_put() helpers. While nla_total_size(data_len) bytes are allocated (including NLA alignment padding), only data_len bytes of actual packet data are copied. The trailing nla_padlen(data_len) bytes (1-3 when data_len is not 4-byte aligned) are never initialized, leaking stale heap contents to userspace via the NFLOG netlink socket. Replace the manual attribute construction with nla_reserve(), which handles the tailroom check, header setup, and padding zeroing via __nla_reserve(). The subsequent skb_copy_bits() fills in the payload data on top of the properly initialized attribute.Show less

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conntrack_sip: fix use of uninitialized rtp_addr in process_sdp process_sdp() declares union nf_inet_addr rtp_addr on the stack and passes it to the nf_nat_sip sdp_session hook after walking the SDP media descriptions. However rtp_addr is only initialized inside the media loop when a recognized media type with a non-zero port is found. If the SDP body contains no m= lines, only inactive media sections (m=audio 0 ...) or only unrecognized media types, rtp_addr is never assigned. Despite that, the function still calls hooks->sdp_session() with &rtp_addr, causing nf_nat_sdp_session() to format the stale stack value as an IP address and rewrite the SDP session owner and connection lines with it. With CONFIG_INIT_STACK_ALL_ZERO (default on most distributions) this results in the session-level o= and c= addresses being rewritten to 0.0.0.0 for inactive SDP sessions. Without stack auto-init the rewritten address is whatever happened to be on the stack. Fix this by pre-initializing rtp_addr from the session-level connection address (caddr) when available, and tracking via a have_rtp_addr flag whether any valid address was established. Skip the sdp_session hook entirely when no valid address exists.Show less

In the Linux kernel, the following vulnerability has been resolved: ACPI: EC: clean up handlers on probe failure in acpi_ec_setup() When ec_install_handlers() returns -EPROBE_DEFER on reduced-hardware platforms, it has already started the EC and installed the address space handler with the struct acpi_ec pointer as handler context. However, acpi_ec_setup() propagates the error without any cleanup. The caller acpi_ec_add() then frees the struct acpi_ec for non-boot instances, leaving a dangling handler context in ACPICA. Any subsequent AML evaluation that accesses an EC OpRegion field dispatches into acpi_ec_space_handler() with the freed pointer, causing a use-after-free: BUG: KASAN: slab-use-after-free in mutex_lock (kernel/locking/mutex.c:289) Write of size 8 at addr ffff88800721de38 by task init/1 Call Trace: <TASK> mutex_lock (kernel/locking/mutex.c:289) acpi_ec_space_handler (drivers/acpi/ec.c:1362) acpi_ev_address_space_dispatch (drivers/acpi/acpica/evregion.c:293) acpi_ex_access_region (drivers/acpi/acpica/exfldio.c:246) acpi_ex_field_datum_io (drivers/acpi/acpica/exfldio.c:509) acpi_ex_extract_from_field (drivers/acpi/acpica/exfldio.c:700) acpi_ex_read_data_from_field (drivers/acpi/acpica/exfield.c:327) acpi_ex_resolve_node_to_value (drivers/acpi/acpica/exresolv.c:392) </TASK> Allocated by task 1: acpi_ec_alloc (drivers/acpi/ec.c:1424) acpi_ec_add (drivers/acpi/ec.c:1692) Freed by task 1: kfree (mm/slub.c:6876) acpi_ec_add (drivers/acpi/ec.c:1751) The bug triggers on reduced-hardware EC platforms (ec->gpe < 0) when the GPIO IRQ provider defers probing. Once the stale handler exists, any unprivileged sysfs read that causes AML to touch an EC OpRegion (battery, thermal, backlight) exercises the dangling pointer. Fix this by calling ec_remove_handlers() in the error path of acpi_ec_setup() before clearing first_ec. ec_remove_handlers() checks each EC_FLAGS_* bit before acting, so it is safe to call regardless of how far ec_install_handlers() progressed: -ENODEV (handler not installed): only calls acpi_ec_stop() -EPROBE_DEFER (handler installed): removes handler, stops ECShow less

In the Linux kernel, the following vulnerability has been resolved: rds: ib: reject FRMR registration before IB connection is established rds_ib_get_mr() extracts the rds_ib_connection from conn->c_transport_data and passes it to rds_ib_reg_frmr() for FRWR memory registration. On a fresh outgoing connection, ic is allocated in rds_ib_conn_alloc() with i_cm_id = NULL because the connection worker has not yet called rds_ib_conn_path_connect() to create the rdma_cm_id. When sendmsg() with RDS_CMSG_RDMA_MAP is called on such a connection, the sendmsg path parses the control message before any connection establishment, allowing rds_ib_post_reg_frmr() to dereference ic->i_cm_id->qp and crash the kernel. The existing guard in rds_ib_reg_frmr() only checks for !ic (added in commit 9e630bcb7701), which does not catch this case since ic is allocated early and is always non-NULL once the connection object exists. KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017] RIP: 0010:rds_ib_post_reg_frmr+0x50e/0x920 Call Trace: rds_ib_post_reg_frmr (net/rds/ib_frmr.c:167) rds_ib_map_frmr (net/rds/ib_frmr.c:252) rds_ib_reg_frmr (net/rds/ib_frmr.c:430) rds_ib_get_mr (net/rds/ib_rdma.c:615) __rds_rdma_map (net/rds/rdma.c:295) rds_cmsg_rdma_map (net/rds/rdma.c:860) rds_sendmsg (net/rds/send.c:1363) ____sys_sendmsg do_syscall_64 Add a check in rds_ib_get_mr() that verifies ic, i_cm_id, and qp are all non-NULL before proceeding with FRMR registration, mirroring the guard already present in rds_ib_post_inv(). Return -ENODEV when the connection is not ready, which the existing error handling in rds_cmsg_send() converts to -EAGAIN for userspace retry and triggers rds_conn_connect_if_down() to start the connection worker.Show less

In the Linux kernel, the following vulnerability has been resolved: netfilter: x_tables: restrict xt_check_match/xt_check_target extensions for NFPROTO_ARP Weiming Shi says: xt_match and xt_target structs registered with NFPROTO_UNSPEC can be loaded by any protocol family through nft_compat. When such a match/target sets .hooks to restrict which hooks it may run on, the bitmask uses NF_INET_* constants. This is only correct for families whose hook layout matches NF_INET_*: IPv4, IPv6, INET, and bridge all share the same five hooks (PRE_ROUTING ... POST_ROUTING). ARP only has three hooks (IN=0, OUT=1, FORWARD=2) with different semantics. Because NF_ARP_OUT == 1 == NF_INET_LOCAL_IN, the .hooks validation silently passes for the wrong reasons, allowing matches to run on ARP chains where the hook assumptions (e.g. state->in being set on input hooks) do not hold. This leads to NULL pointer dereferences; xt_devgroup is one concrete example: Oops: general protection fault, probably for non-canonical address 0xdffffc0000000044: 0000 [#1] SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000220-0x0000000000000227] RIP: 0010:devgroup_mt+0xff/0x350 Call Trace: <TASK> nft_match_eval (net/netfilter/nft_compat.c:407) nft_do_chain (net/netfilter/nf_tables_core.c:285) nft_do_chain_arp (net/netfilter/nft_chain_filter.c:61) nf_hook_slow (net/netfilter/core.c:623) arp_xmit (net/ipv4/arp.c:666) </TASK> Kernel panic - not syncing: Fatal exception in interrupt Fix it by restricting arptables to NFPROTO_ARP extensions only. Note that arptables-legacy only supports: - arpt_CLASSIFY - arpt_mangle - arpt_MARK that provide explicit NFPROTO_ARP match/target declarations.Show less

In the Linux kernel, the following vulnerability has been resolved: net/sched: sch_hfsc: fix divide-by-zero in rtsc_min() m2sm() converts a u32 slope to a u64 scaled value. For large inputs (e.g. m1=4000000000), the result can reach 2^32. rtsc_min() stores the difference of two such u64 values in a u32 variable `dsm` and uses it as a divisor. When the difference is exactly 2^32 the truncation yields zero, causing a divide-by-zero oops in the concave-curve intersection path: Oops: divide error: 0000 RIP: 0010:rtsc_min (net/sched/sch_hfsc.c:601) Call Trace: init_ed (net/sched/sch_hfsc.c:629) hfsc_enqueue (net/sched/sch_hfsc.c:1569) [...] Widen `dsm` to u64 and replace do_div() with div64_u64() so the full difference is preserved.Show less

In the Linux kernel, the following vulnerability has been resolved: net/sched: cls_flow: fix NULL pointer dereference on shared blocks flow_change() calls tcf_block_q() and dereferences q->handle to derive a default baseclass. Shared blocks leave block->q NULL, causing a NULL deref when a flow filter without a fully qualified baseclass is created on a shared block. Check tcf_block_shared() before accessing block->q and return -EINVAL for shared blocks. This avoids the null-deref shown below: ======================================================================= KASAN: null-ptr-deref in range [0x0000000000000038-0x000000000000003f] RIP: 0010:flow_change (net/sched/cls_flow.c:508) Call Trace: tc_new_tfilter (net/sched/cls_api.c:2432) rtnetlink_rcv_msg (net/core/rtnetlink.c:6980) [...] =======================================================================Show less

In the Linux kernel, the following vulnerability has been resolved: net/sched: cls_fw: fix NULL pointer dereference on shared blocks The old-method path in fw_classify() calls tcf_block_q() and dereferences q->handle. Shared blocks leave block->q NULL, causing a NULL deref when an empty cls_fw filter is attached to a shared block and a packet with a nonzero major skb mark is classified. Reject the configuration in fw_change() when the old method (no TCA_OPTIONS) is used on a shared block, since fw_classify()'s old-method path needs block->q which is NULL for shared blocks. The fixed null-ptr-deref calling stack: KASAN: null-ptr-deref in range [0x0000000000000038-0x000000000000003f] RIP: 0010:fw_classify (net/sched/cls_fw.c:81) Call Trace: tcf_classify (./include/net/tc_wrapper.h:197 net/sched/cls_api.c:1764 net/sched/cls_api.c:1860) tc_run (net/core/dev.c:4401) __dev_queue_xmit (net/core/dev.c:4535 net/core/dev.c:4790)Show less

In the Linux kernel, the following vulnerability has been resolved: bridge: mrp: reject zero test interval to avoid OOM panic br_mrp_start_test() and br_mrp_start_in_test() accept the user-supplied interval value from netlink without validation. When interval is 0, usecs_to_jiffies(0) yields 0, causing the delayed work (br_mrp_test_work_expired / br_mrp_in_test_work_expired) to reschedule itself with zero delay. This creates a tight loop on system_percpu_wq that allocates and transmits MRP test frames at maximum rate, exhausting all system memory and causing a kernel panic via OOM deadlock. The same zero-interval issue applies to br_mrp_start_in_test_parse() for interconnect test frames. Use NLA_POLICY_MIN(NLA_U32, 1) in the nla_policy tables for both IFLA_BRIDGE_MRP_START_TEST_INTERVAL and IFLA_BRIDGE_MRP_START_IN_TEST_INTERVAL, so zero is rejected at the netlink attribute parsing layer before the value ever reaches the workqueue scheduling code. This is consistent with how other bridge subsystems (br_fdb, br_mst) enforce range constraints on netlink attributes.Show less

In the Linux kernel, the following vulnerability has been resolved: net: bonding: fix use-after-free in bond_xmit_broadcast() bond_xmit_broadcast() reuses the original skb for the last slave (determined by bond_is_last_slave()) and clones it for others. Concurrent slave enslave/release can mutate the slave list during RCU-protected iteration, changing which slave is "last" mid-loop. This causes the original skb to be double-consumed (double-freed). Replace the racy bond_is_last_slave() check with a simple index comparison (i + 1 == slaves_count) against the pre-snapshot slave count taken via READ_ONCE() before the loop. This preserves the zero-copy optimization for the last slave while making the "last" determination stable against concurrent list mutations. The UAF can trigger the following crash: ================================================================== BUG: KASAN: slab-use-after-free in skb_clone Read of size 8 at addr ffff888100ef8d40 by task exploit/147 CPU: 1 UID: 0 PID: 147 Comm: exploit Not tainted 7.0.0-rc3+ #4 PREEMPTLAZY Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:123) print_report (mm/kasan/report.c:379 mm/kasan/report.c:482) kasan_report (mm/kasan/report.c:597) skb_clone (include/linux/skbuff.h:1724 include/linux/skbuff.h:1792 include/linux/skbuff.h:3396 net/core/skbuff.c:2108) bond_xmit_broadcast (drivers/net/bonding/bond_main.c:5334) bond_start_xmit (drivers/net/bonding/bond_main.c:5567 drivers/net/bonding/bond_main.c:5593) dev_hard_start_xmit (include/linux/netdevice.h:5325 include/linux/netdevice.h:5334 net/core/dev.c:3871 net/core/dev.c:3887) __dev_queue_xmit (include/linux/netdevice.h:3601 net/core/dev.c:4838) ip6_finish_output2 (include/net/neighbour.h:540 include/net/neighbour.h:554 net/ipv6/ip6_output.c:136) ip6_finish_output (net/ipv6/ip6_output.c:208 net/ipv6/ip6_output.c:219) ip6_output (net/ipv6/ip6_output.c:250) ip6_send_skb (net/ipv6/ip6_output.c:1985) udp_v6_send_skb (net/ipv6/udp.c:1442) udpv6_sendmsg (net/ipv6/udp.c:1733) __sys_sendto (net/socket.c:730 net/socket.c:742 net/socket.c:2206) __x64_sys_sendto (net/socket.c:2209) do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) </TASK> Allocated by task 147: Freed by task 147: The buggy address belongs to the object at ffff888100ef8c80 which belongs to the cache skbuff_head_cache of size 224 The buggy address is located 192 bytes inside of freed 224-byte region [ffff888100ef8c80, ffff888100ef8d60) Memory state around the buggy address: ffff888100ef8c00: fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc fc ffff888100ef8c80: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff888100ef8d00: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc ^ ffff888100ef8d80: fc fc fc fc fc fc fc fc fa fb fb fb fb fb fb fb ffff888100ef8e00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ==================================================================Show less