Linksys

A vulnerability was identified in Linksys MR9600 2.0.6.206937. This affects the function BTRequestGetSmartConnectStatus of the file /etc/init.d/run_central2.sh of the component JNAP Action Handler. The manipulation of the argument pin leads to os command injection. The attack may be initiated remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way.Show less

A flaw has been found in Linksys MR9600 2.0.6.206937. Affected is the function smartConnectConfigure of the file SmartConnect.lua. Executing a manipulation of the argument configApSsid/configApPassphrase/srpLogin/srpPassword can lead to os command injection. The attack may be launched remotely. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way.Show less

Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability in Linksys MR9600, Linksys MX4200 allows that contents of a USB drive partition can be mounted in an arbitrary location of the file system. This may result in the execution of shell scripts in the context of a root user.This issue affects MR9600: 1.0.4.205530; MX4200: 1.0.13.210200.Show less

A stored cross-site scripting (XSS) vulnerability in the page_save component of Linksys E5600 V1.1.0.26 allows attackers to execute arbitrary web scripts or HTML via a crafted payload injected into the hostname and domainName parameters.Show less

A security flaw has been discovered in Linksys RE6500, RE6250, RE6300, RE6350, RE7000 and RE9000 1.0.013.001/1.0.04.001/1.0.04.002/1.1.05.003/1.2.07.001. This vulnerability affects the function RE2000v2Repeater_get_wired_clientlist_setClientsName of the file mod_form.so. The manipulation of the argument clientsname_0 results in stack-based buffer overflow. The attack may be launched remotely. The exploit has been released to the public and may be exploited. The vendor was contacted early about this disclosure but did not respond in any way.Show less

A vulnerability was identified in Linksys RE6500, RE6250, RE6300, RE6350, RE7000 and RE9000 1.0.013.001/1.0.04.001/1.0.04.002/1.1.05.003/1.2.07.001. This affects the function AP_get_wired_clientlist_setClientsName of the file mod_form.so. The manipulation of the argument clientsname_0 leads to stack-based buffer overflow. The attack may be initiated remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way.Show less

A vulnerability was determined in Linksys RE6500, RE6250, RE6300, RE6350, RE7000 and RE9000 1.0.013.001/1.0.04.001/1.0.04.002/1.1.05.003/1.2.07.001. Affected by this issue is the function RE2000v2Repeater_get_wireless_clientlist_setClientsName of the file mod_form.so. Executing manipulation of the argument clientsname_0 can lead to stack-based buffer overflow. The attack can be launched remotely. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way.Show less

A vulnerability was found in Linksys RE6500, RE6250, RE6300, RE6350, RE7000 and RE9000 1.0.013.001/1.0.04.001/1.0.04.002/1.1.05.003/1.2.07.001. Affected by this vulnerability is the function AP_get_wireless_clientlist_setClientsName of the file mod_form.so. Performing manipulation of the argument clientsname_0 results in stack-based buffer overflow. The attack can be initiated remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way.Show less

A stack-based buffer overflow exists in the get_merge_mac function of the httpd binary on Linksys E1200 v2 routers (Firmware E1200_v2.0.11.001_us.tar.gz). The function concatenates up to six user-supplied CGI parameters matching <parameter>_0~5 into a fixed-size buffer (a2) without proper bounds checking, appending colon delimiters during concatenation. Remote attackers can exploit this vulnerability via specially crafted HTTP requests to execute arbitrary code or cause denial of service without authentication.Show less

A stack-based buffer overflow vulnerability exists in the makeRequest.cgi binary of Linksys RE7000 routers (Firmware FW_v2.0.15_211230_1012). The arplookup function parses lines from /proc/net/arp using sscanf("%16s ... %18s ..."), storing results into buffers v6 (12 bytes) and v7 (20 bytes). Since the format specifiers allow up to 16 and 18 bytes respectively, oversized input can overflow the buffers, resulting in stack corruption. Local attackers controlling /proc/net/arp contents can exploit this issue to cause denial of service or potentially execute arbitrary code.Show less

A stack-based buffer overflow vulnerability exists in the mtk_dut binary of Linksys E7350 routers (Firmware 1.1.00.032). The function sub_4045A8 reads up to 256 bytes from /sys/class/net/%s/address into a local buffer and then copies it into caller-provided buffer a1 using strcpy without boundary checks. Since a1 is often allocated with significantly smaller sizes (20-32 bytes), local attackers controlling the contents of /sys/class/net/%s/address can trigger buffer overflows, leading to memory corruption, denial of service, or potential arbitrary code execution.Show less

A stack-based buffer overflow exists in the validate_static_route function of the httpd binary on Linksys E1200 v2 routers (Firmware E1200_v2.0.11.001_us.tar.gz). The function improperly concatenates user-supplied CGI parameters (route_ipaddr_0~3, route_netmask_0~3, route_gateway_0~3) into fixed-size buffers (v6, v10, v14) without proper bounds checking. Remote attackers can exploit this vulnerability via specially crafted HTTP requests to execute arbitrary code or cause denial of service without authentication.Show less

A stack-based buffer overflow vulnerability exists in the libshared.so library of Cisco Linksys E1200 v2 routers (Firmware E1200_v2.0.11.001_us.tar.gz). The functions get_mac_from_ip and get_ip_from_mac use sscanf with overly permissive "%100s" format specifiers to parse entries from /proc/net/arp into fixed-size buffers (v6: 50 bytes, v7 sub-arrays: 50 bytes). This allows local attackers controlling the contents of /proc/net/arp to overflow stack buffers, leading to memory corruption, denial of service, or potential arbitrary code execution.Show less

A stack-based buffer overflow exists in the httpd binary of Linksys E1200 v2 routers (Firmware E1200_v2.0.11.001_us.tar.gz). The apply_cgi and block_cgi functions copy user-supplied input from the "url" CGI parameter into stack buffers (v36, v29) using sprintf without bounds checking. Because these buffers are allocated as single-byte variables, any non-empty input will trigger a buffer overflow. Remote attackers can exploit this vulnerability via crafted HTTP requests to execute arbitrary code or cause denial of service without authentication.Show less

A stack-based buffer overflow exists in the get_merge_ipaddr function of the httpd binary on Linksys E1200 v2 routers (Firmware E1200_v2.0.11.001_us.tar.gz). The function concatenates up to four user-supplied CGI parameters matching <parameter>_0~3 into a fixed-size buffer (a2) without bounds checking. Remote attackers can exploit this vulnerability via specially crafted HTTP requests to execute arbitrary code or cause denial of service without authentication.Show less

An unauthenticated command injection vulnerability exists in the Start_EPI function of the httpd binary on Linksys E1200 v2 routers (Firmware E1200_v2.0.11.001_us.tar.gz). The vulnerability occurs because user-supplied CGI parameters (wl_ant, wl_ssid, wl_rate, ttcp_num, ttcp_ip, ttcp_size) are concatenated into system command strings without proper sanitization and executed via wl_exec_cmd. Successful exploitation allows remote attackers to execute arbitrary commands on the device without authentication.Show less

A vulnerability was determined in Linksys RE6250, RE6300, RE6350, RE6500, RE7000 and RE9000 1.0.013.001/1.0.04.001/1.0.04.002/1.1.05.003/1.2.07.001. This issue affects the function cgiMain of the file /cgi-bin/upload.cgi. Executing manipulation of the argument filename can lead to os command injection. The attack may be performed from a remote location. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way.Show less