Juniper

An Improper Check for Unusual or Exceptional Conditions vulnerability in the advanced forwarding toolkit (evo-aftmand) of Juniper Networks Junos OS Evolved on PTX Series allows an unauthenticated network-based attacker generating continuous routing updates, resulting in unilist ECMP routes, to crash the evo-aftmand process on the PFE, leading to a Denial-of-Service (DoS). The conditions required for successful exploitation are based on a sequence of events that are outside an attacker's direct control. Unified list (unilist) ECMP routes are a specific ECMP behavior where multiple equal-cost routes share a single logical next-hop list entry. The router treats them as one route with multiple next hops and load balances traffic across that unified list. Due to an issue processing unilist ECMP routing updates, internal state corruption may occur, especially in large-scale ECMP unilist deployments, leading to the evo-aftmand process crashing, resulting in an evo-aftmand-bx core. Manual intervention is required to recover by rebooting the system or restarting the FPC. This issue affects Junos OS Evolved on PTX : * from 24.4R2-EVO before 24.4R2-S3-EVO; * from 25.2 before 25.2R2-EVO.Show less

A NULL Pointer Dereference vulnerability in the management daemon (mgd) of Juniper Networks Junos OS and Junos OS Evolved allows a local, high-privileged attacker setting or deactivating a specific SSH configuration parameter to create a Denial of Service (DoS). A local high-privileged user configuring or deactivating a specific 'system services ssh' configuration parameter can exploit a null pointer dereference in one of the functions used by SSH. The function attempts to dereference a null pointer when accessing certain configuration data, resulting in an mgd process crash and restart. Continued execution of these configuration commands will create a sustained Denial of Service (DoS) condition. This issue affects: Junos OS: * from 22.3 before 22.3R3-S5; * from 22.4 before 22.4R3-S10; * from 23.2 before 23.2R2-S7; * from 23.4 before 23.4R2-S8. This issue does not affect Junos OS before 22.3R1. Junos OS Evolved: * from 22.3R1-EVO before 23.2R2-S7-EVO; * from 23.4 before 23.4R2-S8-EVO. This issue does not affect Junos OS Evolved before 22.3R1-EVO.Show less

An Improper Input Validation vulnerability in Juniper Networks Junos OS and Junos OS Evolved allows an unauthenticated, adjacent attacker, sending a specific genuine BGP packet in an already established BGP session to reset only that session causing a Denial of Service (DoS). An attacker repeatedly sending the packet will sustain the Denial of Service (DoS).This issue affects Junos OS: * 25.2 versions before 25.2R2 This issue does not affect Junos OS versions before 25.2R1. This issue affects Junos OS Evolved: * 25.2-EVO versions before 25.2R2-EVO This issue does not affect Junos OS Evolved versions before 25.2R1-EVO. eBGP and iBGP are affected. IPv4 and IPv6 are affected.Show less

An Execution with Unnecessary Privileges vulnerability in the User Interface (UI) of Juniper Networks Junos OS and Junos OS Evolved allows a local, low-privileged attacker to gain root privileges, thus compromising the system. When a configuration that allows unsigned Python op scripts is present on the device, a non-root user is able to execute malicious op scripts as a root-equivalent user, leading to privilege escalation.  This issue affects Junos OS:  * All versions before 22.4R3-S7,  * from 23.2 before 23.2R2-S4,  * from 23.4 before 23.4R2-S6, * from 24.2 before 24.2R1-S2, 24.2R2,  * from 24.4 before 24.4R1-S2, 24.4R2;  Junos OS Evolved:  * All versions before 22.4R3-S7-EVO,  * from 23.2 before 23.2R2-S4-EVO,  * from 23.4 before 23.4R2-S6-EVO, * from 24.2 before 24.2R2-EVO,  * from 24.4 before 24.4R1-S1-EVO, 24.4R2-EVO.Show less

An OS Command Injection vulnerability in the CLI processing of Juniper Networks Junos OS and Junos OS Evolved allows a local, high-privileged attacker executing specific, crafted CLI commands to inject arbitrary shell commands as root, leading to a complete compromise of the system. Certain 'set system' commands, when executed with crafted arguments, are not properly sanitized, allowing for arbitrary shell injection. These shell commands are executed as root, potentially allowing for complete control of the vulnerable system. This issue affects: Junos OS:  * all versions before 22.4R3-S8,  * from 23.2 before 23.2R2-S5,  * from 23.4 before 23.4R2-S7,  * from 24.2 before 24.2R2-S2,  * from 24.4 before 24.4R2,  * from 25.2 before 25.2R2;  Junos OS Evolved:  * all versions before 22.4R3-S8-EVO,  * from 23.2 before 23.2R2-S5-EVO,  * from 23.4 before 23.4R2-S7-EVO,  * from 24.2 before 24.2R2-S2-EVO,  * from 24.4 before 24.4R2-EVO,  * from 25.2 before 25.2R1-S1-EVO, 25.2R2-EVO.Show less

An Improper Check for Unusual or Exceptional Conditions vulnerability in the flow daemon (flowd) of Juniper Networks Junos OS on SRX Series allows an attacker sending a specific, malformed ICMPv6 packet to cause the srxpfe process to crash and restart. Continued receipt and processing of these packets will repeatedly crash the srxpfe process and sustain the Denial of Service (DoS) condition. During NAT64 translation, receipt of a specific, malformed ICMPv6 packet destined to the device will cause the srxpfe process to crash and restart. This issue cannot be triggered using IPv4 nor other IPv6 traffic. This issue affects Junos OS on SRX Series: * all versions before 21.2R3-S10, * all versions of 21.3, * from 21.4 before 21.4R3-S12, * all versions of 22.1, * from 22.2 before 22.2R3-S8, * all versions of 22.4, * from 22.4 before 22.4R3-S9, * from 23.2 before 23.2R2-S6, * from 23.4 before 23.4R2-S7, * from 24.2 before 24.2R2-S3, * from 24.4 before 24.4R2-S3, * from 25.2 before 25.2R1-S2, 25.2R2.Show less

A Missing Authentication for Critical Function vulnerability in the Flexible PIC Concentrators (FPCs) of Juniper Networks Junos OS Evolved on PTX Series allows a local, authenticated attacker with low privileges to gain direct access to FPCs installed in the device. A local user with low privileges can gain direct access to the installed FPCs as a high privileged user, which can potentially lead to a full compromise of the affected component. This issue affects Junos OS Evolved on PTX10004, PTX10008, PTX100016, with JNP10K-LC1201 or JNP10K-LC1202: * All versions before 21.2R3-S8-EVO, * 21.4-EVO versions before 21.4R3-S7-EVO, * 22.2-EVO versions before 22.2R3-S4-EVO, * 22.3-EVO versions before 22.3R3-S3-EVO, * 22.4-EVO versions before 22.4R3-S2-EVO, * 23.2-EVO versions before 23.2R2-EVO.Show less

An Improper Check for Unusual or Exceptional Conditions vulnerability in the chassis control daemon (chassisd) of Juniper Networks Junos OS on SRX1500, SRX4100, SRX4200 and SRX4600 allows a local attacker with low privileges to cause a complete Denial of Service (DoS). When a specific 'show chassis' CLI command is executed, chassisd crashes and restarts which causes a momentary impact to all traffic until all modules are online again. This issue affects Junos OS on SRX1500, SRX4100, SRX4200 and SRX4600:  * 23.2 versions before 23.2R2-S6, * 23.4 versions before 23.4R2-S7 * 24.2 versions before 24.2R2-S2, * 24.4 versions before 24.4R2, * 25.2 versions before 25.2R1-S1, 25.2R2.Show less

An Improper Check for Unusual or Exceptional Conditions vulnerability in the chassis control daemon (chassisd) of Juniper Networks Junos OS on SRX1600, SRX2300 and SRX4300 allows a local attacker with low privileges to cause a complete Denial of Service (DoS). When a specific 'show chassis' CLI command is executed, chassisd crashes and restarts which causes a momentary impact to all traffic until all modules are online again. This issue affects Junos OS on SRX1600, SRX2300 and SRX4300: * 24.4 versions before 24.4R1-S3, 24.4R2. This issue does not affect Junos OS versions before 24.4R1.Show less

A Missing Authorization vulnerability in the CLI of Juniper Networks Junos OS on MX Series allows a local, authenticated user with low privileges to execute specific commands which will lead to a complete compromise of managed devices. Any user logged in, without requiring specific privileges, can issue 'request csds' CLI operational commands. These commands are only meant to be executed by high privileged or users designated for Juniper Device Manager (JDM) / Connected Security Distributed Services (CSDS) operations as they will impact all aspects of the devices managed via the respective MX. This issue affects Junos OS on MX Series: * 24.4 releases before 24.4R2-S3,  * 25.2 releases before 25.2R2. This issue does not affect Junos OS releases before 24.4.Show less

A Use of Default Password vulnerability in the Juniper Networks Support Insights (JSI) Virtual Lightweight Collector (vLWC) allows an unauthenticated, network-based attacker to take full control of the device. vLWC software images ship with an initial password for a high privileged account. A change of this password is not enforced during the provisioning of the software, which can make full access to the system by unauthorized actors possible.This issue affects all versions of vLWC before 3.0.94.Show less

A Function Call With Incorrect Argument Type vulnerability in the sensor interface of Juniper Networks Junos OS Evolved on PTX Series allows a network-based, authenticated attacker with low privileges to cause a complete Denial of Service (DoS). If colored SRTE policy tunnels are provisioned via PCEP, and gRPC is used to monitor traffic in these tunnels, evo-aftmand crashes and doesn't restart which leads to a complete and persistent service impact. The system has to be manually restarted to recover. The issue is seen only when the Originator ASN field in PCEP contains a value larger than 65,535 (32-bit ASN). The issue is not reproducible when SRTE policy tunnels are statically configured. This issue affects Junos OS Evolved on PTX Series:  * all versions before 22.4R3-S9-EVO, * 23.2 versions before 23.2R2-S6-EVO, * 23.4 versions before 23.4R2-S7-EVO, * 24.2 versions before 24.2R2-S4-EVO, * 24.4 versions before 24.4R2-S2-EVO, * 25.2 versions before 25.2R1-S2-EVO, 25.2R2-EVO.Show less

A Missing Release of Memory after Effective Lifetime vulnerability in the DHCP daemon (jdhcpd) of Juniper Networks Junos OS on MX Series, allows an adjacent, unauthenticated attacker to cause a memory leak, that will eventually cause a complete Denial-of-Service (DoS). In a DHCPv6 over PPPoE, or DHCPv6 over VLAN with Active lease query or Bulk lease query scenario, every subscriber logout will leak a small amount of memory. When all available memory has been exhausted, jdhcpd will crash and restart which causes a complete service impact until the process has recovered. The memory usage of jdhcpd can be monitored with: user@host> show system processes extensive | match jdhcpd This issue affects Junos OS: * all versions before 22.4R3-S1, * 23.2 versions before 23.2R2, * 23.4 versions before 23.4R2.Show less

An Improper Check for Unusual or Exceptional Conditions vulnerability in the packet forwarding engine (pfe) of Juniper Networks Junos OS on specific EX and QFX Series devices allow an unauthenticated, adjacent attacker to cause a complete Denial of Service (DoS). On EX4k, and QFX5k platforms configured as service-provider edge devices, if L2PT is enabled on the UNI and VSTP is enabled on NNI in VXLAN scenarios, receiving VSTP BPDUs on UNI leads to packet buffer allocation failures, resulting in the device to not pass traffic anymore until it is manually recovered with a restart.This issue affects Junos OS: * 24.4 releases before 24.4R2, * 25.2 releases before 25.2R1-S1, 25.2R2. This issue does not affect Junos OS releases before 24.4R1.Show less

A Missing Release of Memory after Effective Lifetime vulnerability in the Layer 2 Address Learning Daemon (l2ald) of Juniper Networks Junos OS and Junos OS Evolved allows an adjacent, unauthenticated attacker to cause a memory leak ultimately leading to a Denial of Service (DoS). In an EVPN-MPLS scenario, routes learned from remote multi-homed Provider Edge (PE) devices are programmed as ESI routes. Due to a logic issue in the l2ald memory management, memory allocated for these routes is not released when there is churn for these routes. As a result, memory leaks in the l2ald process which will ultimately lead to a crash and restart of l2ald. Use the following command to monitor the memory consumption by l2ald: user@device> show system process extensive | match "PID|l2ald" This issue affects: Junos OS: * all versions before 22.4R3-S5, * 23.2 versions before 23.2R2-S3, * 23.4 versions before 23.4R2-S4, * 24.2 versions before 24.2R2; Junos OS Evolved: * all versions before 22.4R3-S5-EVO, * 23.2 versions before 23.2R2-S3-EVO, * 23.4 versions before 23.4R2-S4-EVO, * 24.2 versions before 24.2R2-EVO.Show less

An Improper Following of a Certificate's Chain of Trust vulnerability in J-Web of Juniper Networks Junos OS on SRX Series allows a PITM to intercept the communication of the device and get access to confidential information and potentially modify it. When an SRX device is provisioned to connect to Security Director (SD) cloud, it doesn't perform sufficient verification of the received server certificate. This allows a PITM to intercept the communication between the SRX and SD cloud and access credentials and other sensitive information. This issue affects Junos OS: * all versions before 22.4R3-S9, * 23.2 versions before 23.2R2-S6, * 23.4 versions before 23.4R2-S7, * 24.2 versions before 24.2R2-S3, * 24.4 versions before 24.4R2-S2, * 25.2 versions before 25.2R1-S2, 25.2R2.Show less

An Improper Validation of Syntactic Correctness of Input vulnerability in the IPsec library used by kmd and iked of Juniper Networks Junos OS on SRX Series and MX Series allows an unauthenticated, network-based attacker to cause a complete Denial-of-Service (DoS). If an affected device receives a specifically malformed first ISAKMP packet from the initiator, the kmd/iked process will crash and restart, which momentarily prevents new security associations (SAs) for from being established. Repeated exploitation of this vulnerability causes a complete inability to establish new VPN connections. This issue affects Junos OS on SRX Series and MX Series: * all versions before 22.4R3-S9, * 23.2 version before 23.2R2-S6, * 23.4 version before 23.4R2-S7, * 24.2 versions before 24.2R2-S4, * 24.4 versions before 24.4R2-S3, * 25.2 versions before 25.2R1-S2, 25.2R2.Show less

A Missing Authorization vulnerability in the CLI of Juniper Networks Junos OS and Junos OS Evolved allows a local user with low privileges to read sensitive information. A local user with low privileges can execute the CLI command 'show mgd' with specific arguments which will expose sensitive information. This issue affects Junos OS: * all versions before 22.4R3-S8, * 23.2 versions before 23.2R2-S6, * 23.4 versions before 23.4R2-S6, * 24.2 versions before 24.2R2-S4, * 24.4 versions before 24.4R2-S1, * 25.2 version before 25.2R1-S2, 25.2R2; Junos OS Evolved: * all versions before 23.2R2-S6-EVO, * 23.4 version before 23.4R2-S6-EVO, * 24.2 version before 24.2R2-S4-EVO, * 24.4 versions before 24.4R2-S1-EVO, * 25.2 versions before 25.2R2-EVO.Show less

A Missing Release of Memory after Effective Lifetime vulnerability in the BroadBand Edge subscriber management daemon (bbe-smgd) of Juniper Networks Junos OS on MX Series allows an adjacent, unauthenticated attacker to cause a Denial of Service (DoS). If the authentication packet-type option is configured and a received packet does not match that packet type, the memory leak occurs. When all memory available to bbe-smgd has been consumed, no new subscribers will be able to login. The memory utilization of bbe-smgd can be monitored with the following show command: user@host> show system processes extensive | match bbe-smgd The below log message can be observed when this limit has been reached: bbesmgd[<PID>]: %DAEMON-3-SMD_DPROF_RSMON_ERROR: Resource unavailability, Reason: Daemon Heap Memory exhaustion This issue affects Junos OS on MX Series: * all versions before 22.4R3-S8, * 23.2 versions before 23.2R2-S5, * 23.4 versions before 23.4R2-S6, * 24.2 versions before 24.2R2-S2, * 24.4 versions before 24.4R2, * 25.2 versions before 25.2R2.Show less

An Improper Check for Unusual or Exceptional Conditions vulnerability in the packet forwarding engine (pfe) of Juniper Networks Junos OS on MX Series allows an unauthenticated, network-based attacker to bypass the configured firewall filter and access the control-plane of the device. On MX platforms with MPC10, MPC11, LC4800 or LC9600 line cards, and MX304, firewall filters applied on a loopback interface lo0.n (where n is a non-0 number) don't get executed when lo0.n is in the global VRF / default routing-instance. An affected configuration would be: user@host# show configuration interfaces lo0 | display set set interfaces lo0 unit 1 family inet filter input <filter-name> where a firewall filter is applied to a non-0 loopback interface, but that loopback interface is not referred to in any routing-instance (RI) configuration, which implies that it's used in the default RI. The issue can be observed with the CLI command: user@device> show firewall counter filter <filter_name> not showing any matches. This issue affects Junos OS on MX Series: * all versions before 23.2R2-S6, * 23.4 versions before 23.4R2-S7, * 24.2 versions before 24.2R2, * 24.4 versions before 24.4R2.Show less