Google

An issue was discovered on Samsung mobile devices with O(8.x), P(9.0), and Q(10.0) software. Sticker Center allows directory traversal for an unprivileged process to read arbitrary files. The Samsung ID is SVE-2020-18433 (October 2020).Show less

An issue was discovered in EthernetNetwork on Samsung mobile devices with O(8.1), P(9.0), Q(10.0), and R(11.0) software. PendingIntent allows sdcard access by an unprivileged process. The Samsung ID is SVE-2020-18392 (October 2020).Show less

An issue was discovered in DirEncryptService on Samsung mobile devices with O(8.x), P(9.0), and Q(10.0) software. PendingIntent with an empty intent is mishandled, allowing an attacker to perform a privileged action via a modified intent. The Samsung ID is SVE-2020-18034 (October 2020).Show less

An issue was discovered on LG mobile devices with Android OS 8.0, 8.1, and 9.0 software. The Network Management component could allow an unauthorized actor to kill a TCP connection. The LG ID is LVE-SMP-200023 (October 2020).Show less

An issue was discovered in the GAEN (aka Google/Apple Exposure Notifications) protocol through 2020-09-29, as used in COVID-19 applications on Android and iOS. It allows a user to be put in a position where he or she can be coerced into proving or disproving an exposure notification, because of the persistent state of a private framework.Show less

In TensorFlow Lite before versions 2.2.1 and 2.3.1, models using segment sum can trigger a write out bounds / segmentation fault if the segment ids are not sorted. Code assumes that the segment ids are in increasing order, using the last element of the tensor holding them to determine the dimensionality of output tensor. This results in allocating insufficient memory for the output tensor and in a write outside the bounds of the output array. This usually results in a segmentation fault, but depending on runtime conditions it can provide for a write gadget to be used in future memory corruption-based exploits. The issue is patched in commit 204945b19e44b57906c9344c0d00120eeeae178a and is released in TensorFlow versions 2.2.1, or 2.3.1. A potential workaround would be to add a custom `Verifier` to the model loading code to ensure that the segment ids are sorted, although this only handles the case when the segment ids are stored statically in the model. A similar validation could be done if the segment ids are generated at runtime between inference steps. If the segment ids are generated as outputs of a tensor during inference steps, then there are no possible workaround and users are advised to upgrade to patched code.Show less

In TensorFlow Lite before versions 2.2.1 and 2.3.1, models using segment sum can trigger a denial of service by causing an out of memory allocation in the implementation of segment sum. Since code uses the last element of the tensor holding them to determine the dimensionality of output tensor, attackers can use a very large value to trigger a large allocation. The issue is patched in commit 204945b19e44b57906c9344c0d00120eeeae178a and is released in TensorFlow versions 2.2.1, or 2.3.1. A potential workaround would be to add a custom `Verifier` to limit the maximum value in the segment ids tensor. This only handles the case when the segment ids are stored statically in the model, but a similar validation could be done if the segment ids are generated at runtime, between inference steps. However, if the segment ids are generated as outputs of a tensor during inference steps, then there are no possible workaround and users are advised to upgrade to patched code.Show less

In TensorFlow Lite before versions 2.2.1 and 2.3.1, models using segment sum can trigger writes outside of bounds of heap allocated buffers by inserting negative elements in the segment ids tensor. Users having access to `segment_ids_data` can alter `output_index` and then write to outside of `output_data` buffer. This might result in a segmentation fault but it can also be used to further corrupt the memory and can be chained with other vulnerabilities to create more advanced exploits. The issue is patched in commit 204945b19e44b57906c9344c0d00120eeeae178a and is released in TensorFlow versions 2.2.1, or 2.3.1. A potential workaround would be to add a custom `Verifier` to the model loading code to ensure that the segment ids are all positive, although this only handles the case when the segment ids are stored statically in the model. A similar validation could be done if the segment ids are generated at runtime between inference steps. If the segment ids are generated as outputs of a tensor during inference steps, then there are no possible workaround and users are advised to upgrade to patched code.Show less

In TensorFlow Lite before versions 1.15.4, 2.0.3, 2.1.2, 2.2.1 and 2.3.1, saved models in the flatbuffer format use a double indexing scheme: a model has a set of subgraphs, each subgraph has a set of operators and each operator has a set of input/output tensors. The flatbuffer format uses indices for the tensors, indexing into an array of tensors that is owned by the subgraph. This results in a pattern of double array indexing when trying to get the data of each tensor. However, some operators can have some tensors be optional. To handle this scenario, the flatbuffer model uses a negative `-1` value as index for these tensors. This results in special casing during validation at model loading time. Unfortunately, this means that the `-1` index is a valid tensor index for any operator, including those that don't expect optional inputs and including for output tensors. Thus, this allows writing and reading from outside the bounds of heap allocated arrays, although only at a specific offset from the start of these arrays. This results in both read and write gadgets, albeit very limited in scope. The issue is patched in several commits (46d5b0852, 00302787b7, e11f5558, cd31fd0ce, 1970c21, and fff2c83), and is released in TensorFlow versions 1.15.4, 2.0.3, 2.1.2, 2.2.1, or 2.3.1. A potential workaround would be to add a custom `Verifier` to the model loading code to ensure that only operators which accept optional inputs use the `-1` special value and only for the tensors that they expect to be optional. Since this allow-list type approach is erro-prone, we advise upgrading to the patched code.Show less

In tensorflow-lite before versions 1.15.4, 2.0.3, 2.1.2, 2.2.1 and 2.3.1, if a TFLite saved model uses the same tensor as both input and output of an operator, then, depending on the operator, we can observe a segmentation fault or just memory corruption. We have patched the issue in d58c96946b and will release patch releases for all versions between 1.15 and 2.3. We recommend users to upgrade to TensorFlow 1.15.4, 2.0.3, 2.1.2, 2.2.1, or 2.3.1.Show less

In tensorflow-lite before versions 1.15.4, 2.0.3, 2.1.2, 2.2.1 and 2.3.1, a crafted TFLite model can force a node to have as input a tensor backed by a `nullptr` buffer. This can be achieved by changing a buffer index in the flatbuffer serialization to convert a read-only tensor to a read-write one. The runtime assumes that these buffers are written to before a possible read, hence they are initialized with `nullptr`. However, by changing the buffer index for a tensor and implicitly converting that tensor to be a read-write one, as there is nothing in the model that writes to it, we get a null pointer dereference. The issue is patched in commit 0b5662bc, and is released in TensorFlow versions 1.15.4, 2.0.3, 2.1.2, 2.2.1, or 2.3.1.Show less

In tensorflow-lite before versions 1.15.4, 2.0.3, 2.1.2, 2.2.1 and 2.3.1, when determining the common dimension size of two tensors, TFLite uses a `DCHECK` which is no-op outside of debug compilation modes. Since the function always returns the dimension of the first tensor, malicious attackers can craft cases where this is larger than that of the second tensor. In turn, this would result in reads/writes outside of bounds since the interpreter will wrongly assume that there is enough data in both tensors. The issue is patched in commit 8ee24e7949a203d234489f9da2c5bf45a7d5157d, and is released in TensorFlow versions 1.15.4, 2.0.3, 2.1.2, 2.2.1, or 2.3.1.Show less

In tensorflow-lite before versions 1.15.4, 2.0.3, 2.1.2, 2.2.1 and 2.3.1, to mimic Python's indexing with negative values, TFLite uses `ResolveAxis` to convert negative values to positive indices. However, the only check that the converted index is now valid is only present in debug builds. If the `DCHECK` does not trigger, then code execution moves ahead with a negative index. This, in turn, results in accessing data out of bounds which results in segfaults and/or data corruption. The issue is patched in commit 2d88f470dea2671b430884260f3626b1fe99830a, and is released in TensorFlow versions 1.15.4, 2.0.3, 2.1.2, 2.2.1, or 2.3.1.Show less

In Tensorflow before versions 1.15.4, 2.0.3, 2.1.2, 2.2.1 and 2.3.1, changing the TensorFlow's `SavedModel` protocol buffer and altering the name of required keys results in segfaults and data corruption while loading the model. This can cause a denial of service in products using `tensorflow-serving` or other inference-as-a-service installments. Fixed were added in commits f760f88b4267d981e13f4b302c437ae800445968 and fcfef195637c6e365577829c4d67681695956e7d (both going into TensorFlow 2.2.0 and 2.3.0 but not yet backported to earlier versions). However, this was not enough, as #41097 reports a different failure mode. The issue is patched in commit adf095206f25471e864a8e63a0f1caef53a0e3a6, and is released in TensorFlow versions 1.15.4, 2.0.3, 2.1.2, 2.2.1, or 2.3.1.Show less

In Tensorflow before versions 1.15.4, 2.0.3, 2.1.2, 2.2.1 and 2.3.1, the `data_splits` argument of `tf.raw_ops.StringNGrams` lacks validation. This allows a user to pass values that can cause heap overflow errors and even leak contents of memory In the linked code snippet, all the binary strings after `ee ff` are contents from the memory stack. Since these can contain return addresses, this data leak can be used to defeat ASLR. The issue is patched in commit 0462de5b544ed4731aa2fb23946ac22c01856b80, and is released in TensorFlow versions 1.15.4, 2.0.3, 2.1.2, 2.2.1, or 2.3.1.Show less

In eager mode, TensorFlow before versions 1.15.4, 2.0.3, 2.1.2, 2.2.1 and 2.3.1 does not set the session state. Hence, calling `tf.raw_ops.GetSessionHandle` or `tf.raw_ops.GetSessionHandleV2` results in a null pointer dereference In linked snippet, in eager mode, `ctx->session_state()` returns `nullptr`. Since code immediately dereferences this, we get a segmentation fault. The issue is patched in commit 9a133d73ae4b4664d22bd1aa6d654fec13c52ee1, and is released in TensorFlow versions 1.15.4, 2.0.3, 2.1.2, 2.2.1, or 2.3.1.Show less

In Tensorflow before versions 1.15.4, 2.0.3, 2.1.2, 2.2.1 and 2.3.1, by controlling the `fill` argument of tf.strings.as_string, a malicious attacker is able to trigger a format string vulnerability due to the way the internal format use in a `printf` call is constructed. This may result in segmentation fault. The issue is patched in commit 33be22c65d86256e6826666662e40dbdfe70ee83, and is released in TensorFlow versions 1.15.4, 2.0.3, 2.1.2, 2.2.1, or 2.3.1.Show less