When a program running on an affected system appends data to a file via an NFS client mount, the bug can cause the NFS client to fail to copy in the data to be written but proceed as though the copy operation had succeed...Show moreWhen a program running on an affected system appends data to a file via an NFS client mount, the bug can cause the NFS client to fail to copy in the data to be written but proceed as though the copy operation had succeeded. This means that the data to be written is instead replaced with whatever data had been in the packet buffer previously. Thus, an unprivileged user with access to an affected system may abuse the bug to trigger disclosure of sensitive information. In particular, the leak is limited to data previously stored in mbufs, which are used for network transmission and reception, and for certain types of inter-process communication.
The bug can also be triggered unintentionally by system applications, in which case the data written by the application to an NFS mount may be corrupted. Corrupted data is written over the network to the NFS server, and thus also susceptible to being snooped by other hosts on the network.
Note that the bug exists only in the NFS client; the version and implementation of the server has no effect on whether a given system is affected by the problem.Show less |
In versions of FreeBSD 14.0-RELEASE before 14-RELEASE-p2, FreeBSD 13.2-RELEASE before 13.2-RELEASE-p7 and FreeBSD 12.4-RELEASE before 12.4-RELEASE-p9, the pf(4) packet filter incorrectly validates TCP sequence numbers....Show moreIn versions of FreeBSD 14.0-RELEASE before 14-RELEASE-p2, FreeBSD 13.2-RELEASE before 13.2-RELEASE-p7 and FreeBSD 12.4-RELEASE before 12.4-RELEASE-p9, the pf(4) packet filter incorrectly validates TCP sequence numbers. This could allow a malicious actor to execute a denial-of-service attack against hosts behind the firewall.Show less |
In versions of FreeBSD 13-RELEASE before 13-RELEASE-p5, under certain circumstances the cap_net libcasper(3) service incorrectly validates that updated constraints are strictly subsets of the active constraints. When on...Show moreIn versions of FreeBSD 13-RELEASE before 13-RELEASE-p5, under certain circumstances the cap_net libcasper(3) service incorrectly validates that updated constraints are strictly subsets of the active constraints. When only a list of resolvable domain names was specified without setting any other limitations, an application could submit a new list of domains including include entries not previously listed. This could permit the application to resolve domain names that were previously restricted.Show less |
In versions of FreeBSD 12.4-RELEASE prior to 12.4-RELEASE-p7 and FreeBSD 13.2-RELEASE prior to 13.2-RELEASE-p5 the __sflush() stdio function in libc does not correctly update FILE objects' write space members for write-b...Show moreIn versions of FreeBSD 12.4-RELEASE prior to 12.4-RELEASE-p7 and FreeBSD 13.2-RELEASE prior to 13.2-RELEASE-p5 the __sflush() stdio function in libc does not correctly update FILE objects' write space members for write-buffered streams when the write(2) system call returns an error. Depending on the nature of an application that calls libc's stdio functions and the presence of errors returned from the write(2) system call (or an overridden stdio write routine) a heap buffer overflow may occur. Such overflows may lead to data corruption or the execution of arbitrary code at the privilege level of the calling program.Show less |
On CPU 0 the check for the SMCCC workaround is called before SMCCC support has been initialized. This resulted in no speculative execution workarounds being installed on CPU 0. |
Before correction, the copy_file_range system call checked only for the CAP_READ and CAP_WRITE capabilities on the input and output file descriptors, respectively. Using an offset is logically equivalent to seeking, and...Show moreBefore correction, the copy_file_range system call checked only for the CAP_READ and CAP_WRITE capabilities on the input and output file descriptors, respectively. Using an offset is logically equivalent to seeking, and the system call must additionally require the CAP_SEEK capability.
This incorrect privilege check enabled sandboxed processes with only read or write but no seek capability on a file descriptor to read data from or write data to an arbitrary location within the file corresponding to that file descriptor.Show less |
On an msdosfs filesystem, the 'truncate' or 'ftruncate' system calls under certain circumstances populate the additional space in the file with unallocated data from the underlying disk device, rather than zero bytes.
T...Show moreOn an msdosfs filesystem, the 'truncate' or 'ftruncate' system calls under certain circumstances populate the additional space in the file with unallocated data from the underlying disk device, rather than zero bytes.
This may permit a user with write access to files on a msdosfs filesystem to read unintended data (e.g. from a previously deleted file).
Show less |
In pf packet processing with a 'scrub fragment reassemble' rule, a packet containing multiple IPv6 fragment headers would be reassembled, and then immediately processed. That is, a packet with multiple fragment extensio...Show moreIn pf packet processing with a 'scrub fragment reassemble' rule, a packet containing multiple IPv6 fragment headers would be reassembled, and then immediately processed. That is, a packet with multiple fragment extension headers would not be recognized as the correct ultimate payload. Instead a packet with multiple IPv6 fragment headers would unexpectedly be interpreted as a fragmented packet, rather than as whatever the real payload is.
As a result, IPv6 fragments may bypass pf firewall rules written on the assumption all fragments have been reassembled and, as a result, be forwarded or processed by the host.Show less |
The fwctl driver implements a state machine which is executed when a bhyve guest accesses certain x86 I/O ports. The interface lets the guest copy a string into a buffer resident in the bhyve process' memory. A bug in...Show moreThe fwctl driver implements a state machine which is executed when a bhyve guest accesses certain x86 I/O ports. The interface lets the guest copy a string into a buffer resident in the bhyve process' memory. A bug in the state machine implementation can result in a buffer overflowing when copying this string. Malicious, privileged software running in a guest VM can exploit the buffer overflow to achieve code execution on the host in the bhyve userspace process, which typically runs as root, mitigated by the capabilities assigned through the Capsicum sandbox available to the bhyve process.Show less |
A set of carefully crafted ipv6 packets can trigger an integer overflow in the calculation of a fragment reassembled packet's payload length field. This allows an attacker to trigger a kernel panic, resulting in a denial...Show moreA set of carefully crafted ipv6 packets can trigger an integer overflow in the calculation of a fragment reassembled packet's payload length field. This allows an attacker to trigger a kernel panic, resulting in a denial of service.Show less |
pam_krb5 authenticates a user by essentially running kinit with the password, getting a ticket-granting ticket (tgt) from the Kerberos KDC (Key Distribution Center) over the network, as a way to verify the password. Howe...Show morepam_krb5 authenticates a user by essentially running kinit with the password, getting a ticket-granting ticket (tgt) from the Kerberos KDC (Key Distribution Center) over the network, as a way to verify the password. However, if a keytab is not provisioned on the system, pam_krb5 has no way to validate the response from the KDC, and essentially trusts the tgt provided over the network as being valid. In a non-default FreeBSD installation that leverages pam_krb5 for authentication and does not have a keytab provisioned, an attacker that is able to control both the password and the KDC responses can return a valid tgt, allowing authentication to occur for any user on the system.
Show less |
When GELI reads a key file from standard input, it does not reuse the key file to initialize multiple providers at once resulting in the second and subsequent devices silently using a NULL key as the user key file. If a...Show moreWhen GELI reads a key file from standard input, it does not reuse the key file to initialize multiple providers at once resulting in the second and subsequent devices silently using a NULL key as the user key file. If a user only uses a key file without a user passphrase, the master key is encrypted with an empty key file allowing trivial recovery of the master key.
Show less |
sys/netinet/tcp_timer.h in FreeBSD before 7.0 contains a denial-of-service (DoS) vulnerability due to improper handling of TSopt on TCP connections. NOTE: This vulnerability only affects products that are no longer suppo...Show moresys/netinet/tcp_timer.h in FreeBSD before 7.0 contains a denial-of-service (DoS) vulnerability due to improper handling of TSopt on TCP connections. NOTE: This vulnerability only affects products that are no longer supported by the maintainerShow less |
In FreeBSD 13.0-STABLE before n247428-9352de39c3dc, 12.2-STABLE before r370674, 13.0-RELEASE before p6, and 12.2-RELEASE before p12, certain conditions involving use of the highlight buffer while text is scrolling on the...Show moreIn FreeBSD 13.0-STABLE before n247428-9352de39c3dc, 12.2-STABLE before r370674, 13.0-RELEASE before p6, and 12.2-RELEASE before p12, certain conditions involving use of the highlight buffer while text is scrolling on the console, console data may overwrite data structures associated with the system console or other kernel memory.Show less |
FreeBSD's crontab calculates the MD5 sum of the previous and new cronjob to determine if any changes have been made before copying the new version in. In particular, it uses the MD5File() function, which takes a pathname...Show moreFreeBSD's crontab calculates the MD5 sum of the previous and new cronjob to determine if any changes have been made before copying the new version in. In particular, it uses the MD5File() function, which takes a pathname as an argument, and is called with euid 0. A race condition in this process may lead to an arbitrary MD5 comparison regardless of the read permissions.Show less |
In FreeBSD 13.0-STABLE before n246938-0729ba2f49c9, 12.2-STABLE before r370383, 11.4-STABLE before r370381, 13.0-RELEASE before p4, 12.2-RELEASE before p10, and 11.4-RELEASE before p13, the ggatec daemon does not validat...Show moreIn FreeBSD 13.0-STABLE before n246938-0729ba2f49c9, 12.2-STABLE before r370383, 11.4-STABLE before r370381, 13.0-RELEASE before p4, 12.2-RELEASE before p10, and 11.4-RELEASE before p13, the ggatec daemon does not validate the size of a response before writing it to a fixed-sized buffer allowing a malicious attacker in a privileged network position to overwrite the stack of ggatec and potentially execute arbitrary code.Show less |
In FreeBSD 13.0-STABLE before n246941-20f96f215562, 12.2-STABLE before r370400, 11.4-STABLE before r370399, 13.0-RELEASE before p4, 12.2-RELEASE before p10, and 11.4-RELEASE before p13, certain VirtIO-based device models...Show moreIn FreeBSD 13.0-STABLE before n246941-20f96f215562, 12.2-STABLE before r370400, 11.4-STABLE before r370399, 13.0-RELEASE before p4, 12.2-RELEASE before p10, and 11.4-RELEASE before p13, certain VirtIO-based device models in bhyve failed to handle errors when fetching I/O descriptors. A malicious guest may cause the device model to operate on uninitialized I/O vectors leading to memory corruption, crashing of the bhyve process, and possibly arbitrary code execution in the bhyve process.Show less |
libfetch before 2021-07-26, as used in apk-tools, xbps, and other products, mishandles numeric strings for the FTP and HTTP protocols. The FTP passive mode implementation allows an out-of-bounds read because strtol is us...Show morelibfetch before 2021-07-26, as used in apk-tools, xbps, and other products, mishandles numeric strings for the FTP and HTTP protocols. The FTP passive mode implementation allows an out-of-bounds read because strtol is used to parse the relevant numbers into address bytes. It does not check if the line ends prematurely. If it does, the for-loop condition checks for the '\0' terminator one byte too late.Show less |
In FreeBSD 12.2-STABLE before r367402, 11.4-STABLE before r368202, 12.2-RELEASE before p1, 12.1-RELEASE before p11 and 11.4-RELEASE before p5 the handler for a routing option caches a pointer into the packet buffer holdi...Show moreIn FreeBSD 12.2-STABLE before r367402, 11.4-STABLE before r368202, 12.2-RELEASE before p1, 12.1-RELEASE before p11 and 11.4-RELEASE before p5 the handler for a routing option caches a pointer into the packet buffer holding the ICMPv6 message. However, when processing subsequent options the packet buffer may be freed, rendering the cached pointer invalid. The network stack may later dereference the pointer, potentially triggering a use-after-free.Show less |
In FreeBSD 13.0-STABLE before n245765-bec0d2c9c841, 12.2-STABLE before r369859, 11.4-STABLE before r369866, 13.0-RELEASE before p1, 12.2-RELEASE before p7, and 11.4-RELEASE before p10, missing message validation in libra...Show moreIn FreeBSD 13.0-STABLE before n245765-bec0d2c9c841, 12.2-STABLE before r369859, 11.4-STABLE before r369866, 13.0-RELEASE before p1, 12.2-RELEASE before p7, and 11.4-RELEASE before p10, missing message validation in libradius(3) could allow malicious clients or servers to trigger denial of service in vulnerable servers or clients respectively.Show less |