Espressif

arduino-esp32 is an Arduino core for the ESP32, ESP32-S2, ESP32-S3, ESP32-C3, ESP32-C6 and ESP32-H2 microcontrollers. Prior to 3.3.8, the WebServer Digest authentication implementation in arduino-esp32 computes the authentication hash using the URI field from the client's Authorization header, without verifying that it matches the actual requested URI. This allows an attacker who possesses any valid digest response (computed for URI-A) to authenticate requests to a completely different protected URI (URI-B), bypassing per-resource access control. This vulnerability is fixed in 3.3.8.Show less

arduino-esp32 is an Arduino core for the ESP32, ESP32-S2, ESP32-S3, ESP32-C3, ESP32-C6 and ESP32-H2 microcontrollers. Prior to 3.3.8, the WebServer multipart form parser in arduino-esp32 allocates a Variable Length Array (VLA) on the stack whose size is derived from an attacker-controlled HTTP header field (Content-Type: multipart/form-data; boundary=...) without enforcing any length limit. Sending a boundary string longer than ~8000 characters overflows the 8192-byte task stack of the loopTask, causing a crash and potential remote code execution. This vulnerability is fixed in 3.3.8.Show less

arduino-esp32 is an Arduino core for the ESP32, ESP32-S2, ESP32-S3, ESP32-C3, ESP32-C6 and ESP32-H2 microcontrollers. Prior to 3.3.8, there is a remotely reachable memory corruption issue in the NBNS packet handling path. When NetBIOS is enabled by calling NBNS.begin(...), the device listens on UDP port 137 and processes untrusted NBNS requests from the local network. The request parser trusts the attacker-controlled name_len field without enforcing a bound consistent with the fixed-size destination buffers used later in the flow. This vulnerability is fixed in 3.3.8.Show less

ESF-IDF is the Espressif Internet of Things (IOT) Development Framework. In versions 5.5.2, 5.4.3, 5.3.4, 5.2.6, and 5.1.6, a vulnerability exists in the WPS (Wi-Fi Protected Setup) Enrollee implementation where malformed EAP-WSC packets with truncated payloads can cause integer underflow during fragment length calculation. When processing EAP-Expanded (WSC) messages, the code computes frag_len by subtracting header sizes from the total packet length. If an attacker sends a packet where the EAP Length field covers only the header and flags but omits the expected payload (such as the 2-byte Message Length field when WPS_MSG_FLAG_LEN is set), frag_len becomes negative. This negative value is then implicitly cast to size_t when passed to wpabuf_put_data(), resulting in a very large unsigned value. This issue has been patched in versions 5.5.3, 5.4.4, 5.3.5, 5.2.7, and 5.1.7.Show less

ESF-IDF is the Espressif Internet of Things (IOT) Development Framework. In versions 5.5.2, 5.4.3, 5.3.4, 5.2.6, and 5.1.6, an out-of-bounds read vulnerability was reported in the BLE ATT Prepare Write handling of the BLE provisioning transport (protocomm_ble). The issue can be triggered by a remote BLE client while the device is in provisioning mode. The transport accumulated prepared-write fragments in a fixed-size buffer but incorrectly tracked the cumulative length. By sending repeated prepare write requests with overlapping offsets, a remote client could cause the reported length to exceed the allocated buffer size. This inflated length was then passed to provisioning handlers during execute-write processing, resulting in an out-of-bounds read and potential memory corruption. This issue has been patched in versions 5.5.3, 5.4.4, 5.3.5, 5.2.7, and 5.1.7.Show less

ESF-IDF is the Espressif Internet of Things (IOT) Development Framework. In versions 5.5.2, 5.4.3, 5.3.4, 5.2.6, and 5.1.6, a use-after-free vulnerability was reported in the BLE provisioning transport (protocomm_ble) layer. The issue can be triggered by a remote BLE client while the device is in provisioning mode. The vulnerability occurred when provisioning was stopped with keep_ble_on = true. In this configuration, internal protocomm_ble state and GATT metadata were freed while the BLE stack and GATT services remained active. Subsequent BLE read or write callbacks dereferenced freed memory, allowing a connected or newly connected client to trigger invalid memory acces. This issue has been patched in versions 5.5.3, 5.4.4, 5.3.5, 5.2.7, and 5.1.7.Show less

Espressif ESP-IDF USB Host HID (Human Interface Device) Driver allows access to HID devices. Prior to 1.1.0, calls to hid_host_device_close() can free the same usb_transfer_t twice. The USB event callback and user code share the hid_iface_t state without locking, so both can tear down a READY interface simultaneously, corrupting heap metadata inside the ESP USB host stack. This vulnerability is fixed in 1.1.0.Show less

Espressif ESP-IDF USB Host HID (Human Interface Device) Driver allows access to HID devices. Prior to 1.1.0, usb_class_request_get_descriptor() frees and reallocates hid_device->ctrl_xfer when an oversized descriptor is requested but continues to use the stale local pointer, leading to an immediate use-after-free when processing attacker-controlled Report Descriptor lengths. This vulnerability is fixed in 1.1.0.Show less

Espressif ESP-IDF USB Host UVC Class Driver allows video streaming from USB cameras. Prior to 2.4.0, a vulnerability in the esp-usb UVC host implementation allows a malicious USB Video Class (UVC) device to trigger a stack buffer overflow during configuration-descriptor parsing. When UVC configuration-descriptor printing is enabled, the host prints detailed descriptor information provided by the connected USB device. A specially crafted UVC descriptor may advertise an excessively large length. Because this value is not validated before being copied into a fixed-size stack buffer, an attacker can overflow the buffer and corrupt memory. This vulnerability is fixed in 2.4.0.Show less

ESF-IDF is the Espressif Internet of Things (IOT) Development Framework. In versions 5.5.1, 5.4.3, 5.3.4, 5.2.6, 5.1.6, and earlier, in the avrc_vendor_msg() function of the ESP-IDF BlueDroid AVRCP stack, the allocated buffer size was validated using AVRC_MIN_CMD_LEN (20 bytes). However, the actual fixed header data written before the vendor payload exceeds this value. This totals 29 bytes written before p_msg->p_vendor_data is copied. Using the old AVRC_MIN_CMD_LEN could allow an out-of-bounds write if vendor_len approaches the buffer limit. For commands where vendor_len is large, the original buffer allocation may be insufficient, causing writes beyond the allocated memory. This can lead to memory corruption, crashes, or other undefined behavior. The overflow could be larger when assertions are disabled.Show less

ESF-IDF is the Espressif Internet of Things (IOT) Development Framework. In versions 5.5.1, 5.4.3, 5.3.4, 5.2.6, 5.1.6, and earlier, in the ESP-IDF Bluetooth host stack (BlueDroid), the function bta_dm_sdp_result() used a fixed-size array uuid_list[32][MAX_UUID_SIZE] to store discovered service UUIDs during the SDP (Service Discovery Protocol) process. On modern Bluetooth devices, it is possible for the number of available services to exceed this fixed limit (32). In such cases, if more than 32 services are discovered, subsequent writes to uuid_list could exceed the bounds of the array, resulting in a potential out-of-bounds write condition.Show less

ESF-IDF is the Espressif Internet of Things (IOT) Development Framework. In 5.5.1, 5.4.3, 5.3.4, 5.2.6, 5.1.6, and earlier, when AVRCP is enabled on ESP32, receiving a malformed VENDOR DEPENDENT command from a peer device can cause the Bluetooth stack to access memory before validating the command buffer length. This may lead to an out-of-bounds read, potentially exposing unintended memory content or causing unexpected behavior.Show less

ESF-IDF is the Espressif Internet of Things (IOT) Development Framework. The BluFi example bundled in ESP-IDF was vulnerable to memory overflows in two areas: Wi-Fi credential handling and Diffie–Hellman key exchange. This vulnerability is fixed in 5.4.1, 5.3.3, 5.1.6, and 5.0.9.Show less

ESF-IDF is the Espressif Internet of Things (IOT) Development Framework. An integer underflow vulnerability has been identified in the ESP-NOW protocol implementation within the ESP Wi-Fi component of versions 5.4.1, 5.3.3, 5.2.5, and 5.1.6 of the ESP-IDF framework. This issue stems from insufficient validation of user-supplied data length in the packet receive function. Under certain conditions, this may lead to out-of-bounds memory access and may allow arbitrary memory write operations. On systems without a memory protection scheme, this behavior could potentially be used to achieve remote code execution (RCE) on the target device. In versions 5.4.2, 5.3.4, 5.2.6, and 5.1.6, ESP-NOW has added more comprehensive validation logic on user-supplied data length during packet reception to prevent integer underflow caused by negative value calculations. For ESP-IDF v5.3 and earlier, a workaround can be applied by validating that the `data_len` parameter received in the RX callback (registered via `esp_now_register_recv_cb()`) is a positive value before further processing. For ESP-IDF v5.4 and later, no application-level workaround is available. Users are advised to upgrade to a patched version of ESP-IDF to take advantage of the built-in mitigation.Show less

Espressif Esp idf v5.3.0 is vulnerable to Insecure Permissions resulting in Authentication bypass. In the reconnection phase, the device reuses the session key from a previous connection session, creating an opportunity for attackers to execute security bypass attacks.Show less

ESP-NOW Component provides a connectionless Wi-Fi communication protocol. An replay attacks vulnerability was discovered in the implementation of the ESP-NOW because the caches is not differentiated by message types, it is a single, shared resource for all kinds of messages, whether they are broadcast or unicast, and regardless of whether they are ciphertext or plaintext. This can result an attacker to clear the cache of its legitimate entries, there by creating an opportunity to re-inject previously captured packets. This vulnerability is fixed in 2.5.2.Show less