Debian

In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: handle hdr_first_de() return value The hdr_first_de() function returns a pointer to a struct NTFS_DE. This pointer may be NULL. To handle the NULL error effectively, it is important to implement an error handler. This will help manage potential errors consistently. Additionally, error handling for the return value already exists at other points where this function is called. Found by Linux Verification Center (linuxtesting.org) with SVACE.Show less

In the Linux kernel, the following vulnerability has been resolved: bpf: fix ktls panic with sockmap [ 2172.936997] ------------[ cut here ]------------ [ 2172.936999] kernel BUG at lib/iov_iter.c:629! ...... [ 2172.944996] PKRU: 55555554 [ 2172.945155] Call Trace: [ 2172.945299] <TASK> [ 2172.945428] ? die+0x36/0x90 [ 2172.945601] ? do_trap+0xdd/0x100 [ 2172.945795] ? iov_iter_revert+0x178/0x180 [ 2172.946031] ? iov_iter_revert+0x178/0x180 [ 2172.946267] ? do_error_trap+0x7d/0x110 [ 2172.946499] ? iov_iter_revert+0x178/0x180 [ 2172.946736] ? exc_invalid_op+0x50/0x70 [ 2172.946961] ? iov_iter_revert+0x178/0x180 [ 2172.947197] ? asm_exc_invalid_op+0x1a/0x20 [ 2172.947446] ? iov_iter_revert+0x178/0x180 [ 2172.947683] ? iov_iter_revert+0x5c/0x180 [ 2172.947913] tls_sw_sendmsg_locked.isra.0+0x794/0x840 [ 2172.948206] tls_sw_sendmsg+0x52/0x80 [ 2172.948420] ? inet_sendmsg+0x1f/0x70 [ 2172.948634] __sys_sendto+0x1cd/0x200 [ 2172.948848] ? find_held_lock+0x2b/0x80 [ 2172.949072] ? syscall_trace_enter+0x140/0x270 [ 2172.949330] ? __lock_release.isra.0+0x5e/0x170 [ 2172.949595] ? find_held_lock+0x2b/0x80 [ 2172.949817] ? syscall_trace_enter+0x140/0x270 [ 2172.950211] ? lockdep_hardirqs_on_prepare+0xda/0x190 [ 2172.950632] ? ktime_get_coarse_real_ts64+0xc2/0xd0 [ 2172.951036] __x64_sys_sendto+0x24/0x30 [ 2172.951382] do_syscall_64+0x90/0x170 ...... After calling bpf_exec_tx_verdict(), the size of msg_pl->sg may increase, e.g., when the BPF program executes bpf_msg_push_data(). If the BPF program sets cork_bytes and sg.size is smaller than cork_bytes, it will return -ENOSPC and attempt to roll back to the non-zero copy logic. However, during rollback, msg->msg_iter is reset, but since msg_pl->sg.size has been increased, subsequent executions will exceed the actual size of msg_iter. ''' iov_iter_revert(&msg->msg_iter, msg_pl->sg.size - orig_size); ''' The changes in this commit are based on the following considerations: 1. When cork_bytes is set, rolling back to non-zero copy logic is pointless and can directly go to zero-copy logic. 2. We can not calculate the correct number of bytes to revert msg_iter. Assume the original data is "abcdefgh" (8 bytes), and after 3 pushes by the BPF program, it becomes 11-byte data: "abc?de?fgh?". Then, we set cork_bytes to 6, which means the first 6 bytes have been processed, and the remaining 5 bytes "?fgh?" will be cached until the length meets the cork_bytes requirement. However, some data in "?fgh?" is not within 'sg->msg_iter' (but in msg_pl instead), especially the data "?" we pushed. So it doesn't seem as simple as just reverting through an offset of msg_iter. 3. For non-TLS sockets in tcp_bpf_sendmsg, when a "cork" situation occurs, the user-space send() doesn't return an error, and the returned length is the same as the input length parameter, even if some data is cached. Additionally, I saw that the current non-zero-copy logic for handling corking is written as: ''' line 1177 else if (ret != -EAGAIN) { if (ret == -ENOSPC) ret = 0; goto send_end; ''' So it's ok to just return 'copied' without error when a "cork" situation occurs.Show less

In the Linux kernel, the following vulnerability has been resolved: bpf, sockmap: Fix panic when calling skb_linearize The panic can be reproduced by executing the command: ./bench sockmap -c 2 -p 1 -a --rx-verdict-ingress --rx-strp 100000 Then a kernel panic was captured: ''' [ 657.460555] kernel BUG at net/core/skbuff.c:2178! [ 657.462680] Tainted: [W]=WARN [ 657.463287] Workqueue: events sk_psock_backlog ... [ 657.469610] <TASK> [ 657.469738] ? die+0x36/0x90 [ 657.469916] ? do_trap+0x1d0/0x270 [ 657.470118] ? pskb_expand_head+0x612/0xf40 [ 657.470376] ? pskb_expand_head+0x612/0xf40 [ 657.470620] ? do_error_trap+0xa3/0x170 [ 657.470846] ? pskb_expand_head+0x612/0xf40 [ 657.471092] ? handle_invalid_op+0x2c/0x40 [ 657.471335] ? pskb_expand_head+0x612/0xf40 [ 657.471579] ? exc_invalid_op+0x2d/0x40 [ 657.471805] ? asm_exc_invalid_op+0x1a/0x20 [ 657.472052] ? pskb_expand_head+0xd1/0xf40 [ 657.472292] ? pskb_expand_head+0x612/0xf40 [ 657.472540] ? lock_acquire+0x18f/0x4e0 [ 657.472766] ? find_held_lock+0x2d/0x110 [ 657.472999] ? __pfx_pskb_expand_head+0x10/0x10 [ 657.473263] ? __kmalloc_cache_noprof+0x5b/0x470 [ 657.473537] ? __pfx___lock_release.isra.0+0x10/0x10 [ 657.473826] __pskb_pull_tail+0xfd/0x1d20 [ 657.474062] ? __kasan_slab_alloc+0x4e/0x90 [ 657.474707] sk_psock_skb_ingress_enqueue+0x3bf/0x510 [ 657.475392] ? __kasan_kmalloc+0xaa/0xb0 [ 657.476010] sk_psock_backlog+0x5cf/0xd70 [ 657.476637] process_one_work+0x858/0x1a20 ''' The panic originates from the assertion BUG_ON(skb_shared(skb)) in skb_linearize(). A previous commit(see Fixes tag) introduced skb_get() to avoid race conditions between skb operations in the backlog and skb release in the recvmsg path. However, this caused the panic to always occur when skb_linearize is executed. The "--rx-strp 100000" parameter forces the RX path to use the strparser module which aggregates data until it reaches 100KB before calling sockmap logic. The 100KB payload exceeds MAX_MSG_FRAGS, triggering skb_linearize. To fix this issue, just move skb_get into sk_psock_skb_ingress_enqueue. ''' sk_psock_backlog: sk_psock_handle_skb skb_get(skb) <== we move it into 'sk_psock_skb_ingress_enqueue' sk_psock_skb_ingress____________ ↓ | | → sk_psock_skb_ingress_self | sk_psock_skb_ingress_enqueue sk_psock_verdict_apply_________________↑ skb_linearize ''' Note that for verdict_apply path, the skb_get operation is unnecessary so we add 'take_ref' param to control it's behavior.Show less

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to do sanity check on sbi->total_valid_block_count syzbot reported a f2fs bug as below: ------------[ cut here ]------------ kernel BUG at fs/f2fs/f2fs.h:2521! RIP: 0010:dec_valid_block_count+0x3b2/0x3c0 fs/f2fs/f2fs.h:2521 Call Trace: f2fs_truncate_data_blocks_range+0xc8c/0x11a0 fs/f2fs/file.c:695 truncate_dnode+0x417/0x740 fs/f2fs/node.c:973 truncate_nodes+0x3ec/0xf50 fs/f2fs/node.c:1014 f2fs_truncate_inode_blocks+0x8e3/0x1370 fs/f2fs/node.c:1197 f2fs_do_truncate_blocks+0x840/0x12b0 fs/f2fs/file.c:810 f2fs_truncate_blocks+0x10d/0x300 fs/f2fs/file.c:838 f2fs_truncate+0x417/0x720 fs/f2fs/file.c:888 f2fs_setattr+0xc4f/0x12f0 fs/f2fs/file.c:1112 notify_change+0xbca/0xe90 fs/attr.c:552 do_truncate+0x222/0x310 fs/open.c:65 handle_truncate fs/namei.c:3466 [inline] do_open fs/namei.c:3849 [inline] path_openat+0x2e4f/0x35d0 fs/namei.c:4004 do_filp_open+0x284/0x4e0 fs/namei.c:4031 do_sys_openat2+0x12b/0x1d0 fs/open.c:1429 do_sys_open fs/open.c:1444 [inline] __do_sys_creat fs/open.c:1522 [inline] __se_sys_creat fs/open.c:1516 [inline] __x64_sys_creat+0x124/0x170 fs/open.c:1516 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/syscall_64.c:94 The reason is: in fuzzed image, sbi->total_valid_block_count is inconsistent w/ mapped blocks indexed by inode, so, we should not trigger panic for such case, instead, let's print log and set fsck flag.Show less

In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx5: Fix error flow upon firmware failure for RQ destruction Upon RQ destruction if the firmware command fails which is the last resource to be destroyed some SW resources were already cleaned regardless of the failure. Now properly rollback the object to its original state upon such failure. In order to avoid a use-after free in case someone tries to destroy the object again, which results in the following kernel trace: refcount_t: underflow; use-after-free. WARNING: CPU: 0 PID: 37589 at lib/refcount.c:28 refcount_warn_saturate+0xf4/0x148 Modules linked in: rdma_ucm(OE) rdma_cm(OE) iw_cm(OE) ib_ipoib(OE) ib_cm(OE) ib_umad(OE) mlx5_ib(OE) rfkill mlx5_core(OE) mlxdevm(OE) ib_uverbs(OE) ib_core(OE) psample mlxfw(OE) mlx_compat(OE) macsec tls pci_hyperv_intf sunrpc vfat fat virtio_net net_failover failover fuse loop nfnetlink vsock_loopback vmw_vsock_virtio_transport_common vmw_vsock_vmci_transport vmw_vmci vsock xfs crct10dif_ce ghash_ce sha2_ce sha256_arm64 sha1_ce virtio_console virtio_gpu virtio_blk virtio_dma_buf virtio_mmio dm_mirror dm_region_hash dm_log dm_mod xpmem(OE) CPU: 0 UID: 0 PID: 37589 Comm: python3 Kdump: loaded Tainted: G OE ------- --- 6.12.0-54.el10.aarch64 #1 Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : refcount_warn_saturate+0xf4/0x148 lr : refcount_warn_saturate+0xf4/0x148 sp : ffff80008b81b7e0 x29: ffff80008b81b7e0 x28: ffff000133d51600 x27: 0000000000000001 x26: 0000000000000000 x25: 00000000ffffffea x24: ffff00010ae80f00 x23: ffff00010ae80f80 x22: ffff0000c66e5d08 x21: 0000000000000000 x20: ffff0000c66e0000 x19: ffff00010ae80340 x18: 0000000000000006 x17: 0000000000000000 x16: 0000000000000020 x15: ffff80008b81b37f x14: 0000000000000000 x13: 2e656572662d7265 x12: ffff80008283ef78 x11: ffff80008257efd0 x10: ffff80008283efd0 x9 : ffff80008021ed90 x8 : 0000000000000001 x7 : 00000000000bffe8 x6 : c0000000ffff7fff x5 : ffff0001fb8e3408 x4 : 0000000000000000 x3 : ffff800179993000 x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff000133d51600 Call trace: refcount_warn_saturate+0xf4/0x148 mlx5_core_put_rsc+0x88/0xa0 [mlx5_ib] mlx5_core_destroy_rq_tracked+0x64/0x98 [mlx5_ib] mlx5_ib_destroy_wq+0x34/0x80 [mlx5_ib] ib_destroy_wq_user+0x30/0xc0 [ib_core] uverbs_free_wq+0x28/0x58 [ib_uverbs] destroy_hw_idr_uobject+0x34/0x78 [ib_uverbs] uverbs_destroy_uobject+0x48/0x240 [ib_uverbs] __uverbs_cleanup_ufile+0xd4/0x1a8 [ib_uverbs] uverbs_destroy_ufile_hw+0x48/0x120 [ib_uverbs] ib_uverbs_close+0x2c/0x100 [ib_uverbs] __fput+0xd8/0x2f0 __fput_sync+0x50/0x70 __arm64_sys_close+0x40/0x90 invoke_syscall.constprop.0+0x74/0xd0 do_el0_svc+0x48/0xe8 el0_svc+0x44/0x1d0 el0t_64_sync_handler+0x120/0x130 el0t_64_sync+0x1a4/0x1a8Show less

In the Linux kernel, the following vulnerability has been resolved: clk: bcm: rpi: Add NULL check in raspberrypi_clk_register() devm_kasprintf() returns NULL when memory allocation fails. Currently, raspberrypi_clk_register() does not check for this case, which results in a NULL pointer dereference. Add NULL check after devm_kasprintf() to prevent this issue.Show less

In the Linux kernel, the following vulnerability has been resolved: wifi: rtw88: fix the 'para' buffer size to avoid reading out of bounds Set the size to 6 instead of 2, since 'para' array is passed to 'rtw_fw_bt_wifi_control(rtwdev, para[0], &para[1])', which reads 5 bytes: void rtw_fw_bt_wifi_control(struct rtw_dev *rtwdev, u8 op_code, u8 *data) { ... SET_BT_WIFI_CONTROL_DATA1(h2c_pkt, *data); SET_BT_WIFI_CONTROL_DATA2(h2c_pkt, *(data + 1)); ... SET_BT_WIFI_CONTROL_DATA5(h2c_pkt, *(data + 4)); Detected using the static analysis tool - Svace.Show less

In the Linux kernel, the following vulnerability has been resolved: hisi_acc_vfio_pci: fix XQE dma address error The dma addresses of EQE and AEQE are wrong after migration and results in guest kernel-mode encryption services failure. Comparing the definition of hardware registers, we found that there was an error when the data read from the register was combined into an address. Therefore, the address combination sequence needs to be corrected. Even after fixing the above problem, we still have an issue where the Guest from an old kernel can get migrated to new kernel and may result in wrong data. In order to ensure that the address is correct after migration, if an old magic number is detected, the dma address needs to be updated.Show less

In the Linux kernel, the following vulnerability has been resolved: wifi: ath9k_htc: Abort software beacon handling if disabled A malicious USB device can send a WMI_SWBA_EVENTID event from an ath9k_htc-managed device before beaconing has been enabled. This causes a device-by-zero error in the driver, leading to either a crash or an out of bounds read. Prevent this by aborting the handling in ath9k_htc_swba() if beacons are not enabled.Show less

In the Linux kernel, the following vulnerability has been resolved: bpf, sockmap: Avoid using sk_socket after free when sending The sk->sk_socket is not locked or referenced in backlog thread, and during the call to skb_send_sock(), there is a race condition with the release of sk_socket. All types of sockets(tcp/udp/unix/vsock) will be affected. Race conditions: ''' CPU0 CPU1 backlog::skb_send_sock sendmsg_unlocked sock_sendmsg sock_sendmsg_nosec close(fd): ... ops->release() -> sock_map_close() sk_socket->ops = NULL free(socket) sock->ops->sendmsg ^ panic here ''' The ref of psock become 0 after sock_map_close() executed. ''' void sock_map_close() { ... if (likely(psock)) { ... // !! here we remove psock and the ref of psock become 0 sock_map_remove_links(sk, psock) psock = sk_psock_get(sk); if (unlikely(!psock)) goto no_psock; <=== Control jumps here via goto ... cancel_delayed_work_sync(&psock->work); <=== not executed sk_psock_put(sk, psock); ... } ''' Based on the fact that we already wait for the workqueue to finish in sock_map_close() if psock is held, we simply increase the psock reference count to avoid race conditions. With this patch, if the backlog thread is running, sock_map_close() will wait for the backlog thread to complete and cancel all pending work. If no backlog running, any pending work that hasn't started by then will fail when invoked by sk_psock_get(), as the psock reference count have been zeroed, and sk_psock_drop() will cancel all jobs via cancel_delayed_work_sync(). In summary, we require synchronization to coordinate the backlog thread and close() thread. The panic I catched: ''' Workqueue: events sk_psock_backlog RIP: 0010:sock_sendmsg+0x21d/0x440 RAX: 0000000000000000 RBX: ffffc9000521fad8 RCX: 0000000000000001 ... Call Trace: <TASK> ? die_addr+0x40/0xa0 ? exc_general_protection+0x14c/0x230 ? asm_exc_general_protection+0x26/0x30 ? sock_sendmsg+0x21d/0x440 ? sock_sendmsg+0x3e0/0x440 ? __pfx_sock_sendmsg+0x10/0x10 __skb_send_sock+0x543/0xb70 sk_psock_backlog+0x247/0xb80 ... '''Show less

In the Linux kernel, the following vulnerability has been resolved: net: usb: aqc111: fix error handling of usbnet read calls Syzkaller, courtesy of syzbot, identified an error (see report [1]) in aqc111 driver, caused by incomplete sanitation of usb read calls' results. This problem is quite similar to the one fixed in commit 920a9fa27e78 ("net: asix: add proper error handling of usb read errors"). For instance, usbnet_read_cmd() may read fewer than 'size' bytes, even if the caller expected the full amount, and aqc111_read_cmd() will not check its result properly. As [1] shows, this may lead to MAC address in aqc111_bind() being only partly initialized, triggering KMSAN warnings. Fix the issue by verifying that the number of bytes read is as expected and not less. [1] Partial syzbot report: BUG: KMSAN: uninit-value in is_valid_ether_addr include/linux/etherdevice.h:208 [inline] BUG: KMSAN: uninit-value in usbnet_probe+0x2e57/0x4390 drivers/net/usb/usbnet.c:1830 is_valid_ether_addr include/linux/etherdevice.h:208 [inline] usbnet_probe+0x2e57/0x4390 drivers/net/usb/usbnet.c:1830 usb_probe_interface+0xd01/0x1310 drivers/usb/core/driver.c:396 call_driver_probe drivers/base/dd.c:-1 [inline] really_probe+0x4d1/0xd90 drivers/base/dd.c:658 __driver_probe_device+0x268/0x380 drivers/base/dd.c:800 ... Uninit was stored to memory at: dev_addr_mod+0xb0/0x550 net/core/dev_addr_lists.c:582 __dev_addr_set include/linux/netdevice.h:4874 [inline] eth_hw_addr_set include/linux/etherdevice.h:325 [inline] aqc111_bind+0x35f/0x1150 drivers/net/usb/aqc111.c:717 usbnet_probe+0xbe6/0x4390 drivers/net/usb/usbnet.c:1772 usb_probe_interface+0xd01/0x1310 drivers/usb/core/driver.c:396 ... Uninit was stored to memory at: ether_addr_copy include/linux/etherdevice.h:305 [inline] aqc111_read_perm_mac drivers/net/usb/aqc111.c:663 [inline] aqc111_bind+0x794/0x1150 drivers/net/usb/aqc111.c:713 usbnet_probe+0xbe6/0x4390 drivers/net/usb/usbnet.c:1772 usb_probe_interface+0xd01/0x1310 drivers/usb/core/driver.c:396 call_driver_probe drivers/base/dd.c:-1 [inline] ... Local variable buf.i created at: aqc111_read_perm_mac drivers/net/usb/aqc111.c:656 [inline] aqc111_bind+0x221/0x1150 drivers/net/usb/aqc111.c:713 usbnet_probe+0xbe6/0x4390 drivers/net/usb/usbnet.c:1772Show less

In the Linux kernel, the following vulnerability has been resolved: RDMA/cma: Fix hang when cma_netevent_callback fails to queue_work The cited commit fixed a crash when cma_netevent_callback was called for a cma_id while work on that id from a previous call had not yet started. The work item was re-initialized in the second call, which corrupted the work item currently in the work queue. However, it left a problem when queue_work fails (because the item is still pending in the work queue from a previous call). In this case, cma_id_put (which is called in the work handler) is therefore not called. This results in a userspace process hang (zombie process). Fix this by calling cma_id_put() if queue_work fails.Show less

In the Linux kernel, the following vulnerability has been resolved: net: phy: mscc: Fix memory leak when using one step timestamping Fix memory leak when running one-step timestamping. When running one-step sync timestamping, the HW is configured to insert the TX time into the frame, so there is no reason to keep the skb anymore. As in this case the HW will never generate an interrupt to say that the frame was timestamped, then the frame will never released. Fix this by freeing the frame in case of one-step timestamping.Show less

In the Linux kernel, the following vulnerability has been resolved: calipso: Don't call calipso functions for AF_INET sk. syzkaller reported a null-ptr-deref in txopt_get(). [0] The offset 0x70 was of struct ipv6_txoptions in struct ipv6_pinfo, so struct ipv6_pinfo was NULL there. However, this never happens for IPv6 sockets as inet_sk(sk)->pinet6 is always set in inet6_create(), meaning the socket was not IPv6 one. The root cause is missing validation in netlbl_conn_setattr(). netlbl_conn_setattr() switches branches based on struct sockaddr.sa_family, which is passed from userspace. However, netlbl_conn_setattr() does not check if the address family matches the socket. The syzkaller must have called connect() for an IPv6 address on an IPv4 socket. We have a proper validation in tcp_v[46]_connect(), but security_socket_connect() is called in the earlier stage. Let's copy the validation to netlbl_conn_setattr(). [0]: Oops: general protection fault, probably for non-canonical address 0xdffffc000000000e: 0000 [#1] PREEMPT SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000070-0x0000000000000077] CPU: 2 UID: 0 PID: 12928 Comm: syz.9.1677 Not tainted 6.12.0 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 RIP: 0010:txopt_get include/net/ipv6.h:390 [inline] RIP: 0010: Code: 02 00 00 49 8b ac 24 f8 02 00 00 e8 84 69 2a fd e8 ff 00 16 fd 48 8d 7d 70 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 53 02 00 00 48 8b 6d 70 48 85 ed 0f 84 ab 01 00 RSP: 0018:ffff88811b8afc48 EFLAGS: 00010212 RAX: dffffc0000000000 RBX: 1ffff11023715f8a RCX: ffffffff841ab00c RDX: 000000000000000e RSI: ffffc90007d9e000 RDI: 0000000000000070 RBP: 0000000000000000 R08: ffffed1023715f9d R09: ffffed1023715f9e R10: ffffed1023715f9d R11: 0000000000000003 R12: ffff888123075f00 R13: ffff88810245bd80 R14: ffff888113646780 R15: ffff888100578a80 FS: 00007f9019bd7640(0000) GS:ffff8882d2d00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f901b927bac CR3: 0000000104788003 CR4: 0000000000770ef0 PKRU: 80000000 Call Trace: <TASK> calipso_sock_setattr+0x56/0x80 net/netlabel/netlabel_calipso.c:557 netlbl_conn_setattr+0x10c/0x280 net/netlabel/netlabel_kapi.c:1177 selinux_netlbl_socket_connect_helper+0xd3/0x1b0 security/selinux/netlabel.c:569 selinux_netlbl_socket_connect_locked security/selinux/netlabel.c:597 [inline] selinux_netlbl_socket_connect+0xb6/0x100 security/selinux/netlabel.c:615 selinux_socket_connect+0x5f/0x80 security/selinux/hooks.c:4931 security_socket_connect+0x50/0xa0 security/security.c:4598 __sys_connect_file+0xa4/0x190 net/socket.c:2067 __sys_connect+0x12c/0x170 net/socket.c:2088 __do_sys_connect net/socket.c:2098 [inline] __se_sys_connect net/socket.c:2095 [inline] __x64_sys_connect+0x73/0xb0 net/socket.c:2095 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xaa/0x1b0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f901b61a12d Code: 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f9019bd6fa8 EFLAGS: 00000246 ORIG_RAX: 000000000000002a RAX: ffffffffffffffda RBX: 00007f901b925fa0 RCX: 00007f901b61a12d RDX: 000000000000001c RSI: 0000200000000140 RDI: 0000000000000003 RBP: 00007f901b701505 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000000 R14: 00007f901b5b62a0 R15: 00007f9019bb7000 </TASK> Modules linked in:Show less

In the Linux kernel, the following vulnerability has been resolved: net: openvswitch: Fix the dead loop of MPLS parse The unexpected MPLS packet may not end with the bottom label stack. When there are many stacks, The label count value has wrapped around. A dead loop occurs, soft lockup/CPU stuck finally. stack backtrace: UBSAN: array-index-out-of-bounds in /build/linux-0Pa0xK/linux-5.15.0/net/openvswitch/flow.c:662:26 index -1 is out of range for type '__be32 [3]' CPU: 34 PID: 0 Comm: swapper/34 Kdump: loaded Tainted: G OE 5.15.0-121-generic #131-Ubuntu Hardware name: Dell Inc. PowerEdge C6420/0JP9TF, BIOS 2.12.2 07/14/2021 Call Trace: <IRQ> show_stack+0x52/0x5c dump_stack_lvl+0x4a/0x63 dump_stack+0x10/0x16 ubsan_epilogue+0x9/0x36 __ubsan_handle_out_of_bounds.cold+0x44/0x49 key_extract_l3l4+0x82a/0x840 [openvswitch] ? kfree_skbmem+0x52/0xa0 key_extract+0x9c/0x2b0 [openvswitch] ovs_flow_key_extract+0x124/0x350 [openvswitch] ovs_vport_receive+0x61/0xd0 [openvswitch] ? kernel_init_free_pages.part.0+0x4a/0x70 ? get_page_from_freelist+0x353/0x540 netdev_port_receive+0xc4/0x180 [openvswitch] ? netdev_port_receive+0x180/0x180 [openvswitch] netdev_frame_hook+0x1f/0x40 [openvswitch] __netif_receive_skb_core.constprop.0+0x23a/0xf00 __netif_receive_skb_list_core+0xfa/0x240 netif_receive_skb_list_internal+0x18e/0x2a0 napi_complete_done+0x7a/0x1c0 bnxt_poll+0x155/0x1c0 [bnxt_en] __napi_poll+0x30/0x180 net_rx_action+0x126/0x280 ? bnxt_msix+0x67/0x80 [bnxt_en] handle_softirqs+0xda/0x2d0 irq_exit_rcu+0x96/0xc0 common_interrupt+0x8e/0xa0 </IRQ>Show less

In the Linux kernel, the following vulnerability has been resolved: soc: aspeed: Add NULL check in aspeed_lpc_enable_snoop() devm_kasprintf() returns NULL when memory allocation fails. Currently, aspeed_lpc_enable_snoop() does not check for this case, which results in a NULL pointer dereference. Add NULL check after devm_kasprintf() to prevent this issue. [arj: Fix Fixes: tag to use subject from 3772e5da4454]Show less

In the Linux kernel, the following vulnerability has been resolved: backlight: pm8941: Add NULL check in wled_configure() devm_kasprintf() returns NULL when memory allocation fails. Currently, wled_configure() does not check for this case, which results in a NULL pointer dereference. Add NULL check after devm_kasprintf() to prevent this issue.Show less

In the Linux kernel, the following vulnerability has been resolved: hwmon: (asus-ec-sensors) check sensor index in read_string() Prevent a potential invalid memory access when the requested sensor is not found. find_ec_sensor_index() may return a negative value (e.g. -ENOENT), but its result was used without checking, which could lead to undefined behavior when passed to get_sensor_info(). Add a proper check to return -EINVAL if sensor_index is negative. Found by Linux Verification Center (linuxtesting.org) with SVACE. [groeck: Return error code returned from find_ec_sensor_index]Show less

In the Linux kernel, the following vulnerability has been resolved: dmaengine: ti: Add NULL check in udma_probe() devm_kasprintf() returns NULL when memory allocation fails. Currently, udma_probe() does not check for this case, which results in a NULL pointer dereference. Add NULL check after devm_kasprintf() to prevent this issue.Show less

In the Linux kernel, the following vulnerability has been resolved: usb: renesas_usbhs: Reorder clock handling and power management in probe Reorder the initialization sequence in `usbhs_probe()` to enable runtime PM before accessing registers, preventing potential crashes due to uninitialized clocks. Currently, in the probe path, registers are accessed before enabling the clocks, leading to a synchronous external abort on the RZ/V2H SoC. The problematic call flow is as follows: usbhs_probe() usbhs_sys_clock_ctrl() usbhs_bset() usbhs_write() iowrite16() <-- Register access before enabling clocks Since `iowrite16()` is performed without ensuring the required clocks are enabled, this can lead to access errors. To fix this, enable PM runtime early in the probe function and ensure clocks are acquired before register access, preventing crashes like the following on RZ/V2H: [13.272640] Internal error: synchronous external abort: 0000000096000010 [#1] PREEMPT SMP [13.280814] Modules linked in: cec renesas_usbhs(+) drm_kms_helper fuse drm backlight ipv6 [13.289088] CPU: 1 UID: 0 PID: 195 Comm: (udev-worker) Not tainted 6.14.0-rc7+ #98 [13.296640] Hardware name: Renesas RZ/V2H EVK Board based on r9a09g057h44 (DT) [13.303834] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [13.310770] pc : usbhs_bset+0x14/0x4c [renesas_usbhs] [13.315831] lr : usbhs_probe+0x2e4/0x5ac [renesas_usbhs] [13.321138] sp : ffff8000827e3850 [13.324438] x29: ffff8000827e3860 x28: 0000000000000000 x27: ffff8000827e3ca0 [13.331554] x26: ffff8000827e3ba0 x25: ffff800081729668 x24: 0000000000000025 [13.338670] x23: ffff0000c0f08000 x22: 0000000000000000 x21: ffff0000c0f08010 [13.345783] x20: 0000000000000000 x19: ffff0000c3b52080 x18: 00000000ffffffff [13.352895] x17: 0000000000000000 x16: 0000000000000000 x15: ffff8000827e36ce [13.360009] x14: 00000000000003d7 x13: 00000000000003d7 x12: 0000000000000000 [13.367122] x11: 0000000000000000 x10: 0000000000000aa0 x9 : ffff8000827e3750 [13.374235] x8 : ffff0000c1850b00 x7 : 0000000003826060 x6 : 000000000000001c [13.381347] x5 : 000000030d5fcc00 x4 : ffff8000825c0000 x3 : 0000000000000000 [13.388459] x2 : 0000000000000400 x1 : 0000000000000000 x0 : ffff0000c3b52080 [13.395574] Call trace: [13.398013] usbhs_bset+0x14/0x4c [renesas_usbhs] (P) [13.403076] platform_probe+0x68/0xdc [13.406738] really_probe+0xbc/0x2c0 [13.410306] __driver_probe_device+0x78/0x120 [13.414653] driver_probe_device+0x3c/0x154 [13.418825] __driver_attach+0x90/0x1a0 [13.422647] bus_for_each_dev+0x7c/0xe0 [13.426470] driver_attach+0x24/0x30 [13.430032] bus_add_driver+0xe4/0x208 [13.433766] driver_register+0x68/0x130 [13.437587] __platform_driver_register+0x24/0x30 [13.442273] renesas_usbhs_driver_init+0x20/0x1000 [renesas_usbhs] [13.448450] do_one_initcall+0x60/0x1d4 [13.452276] do_init_module+0x54/0x1f8 [13.456014] load_module+0x1754/0x1c98 [13.459750] init_module_from_file+0x88/0xcc [13.464004] __arm64_sys_finit_module+0x1c4/0x328 [13.468689] invoke_syscall+0x48/0x104 [13.472426] el0_svc_common.constprop.0+0xc0/0xe0 [13.477113] do_el0_svc+0x1c/0x28 [13.480415] el0_svc+0x30/0xcc [13.483460] el0t_64_sync_handler+0x10c/0x138 [13.487800] el0t_64_sync+0x198/0x19c [13.491453] Code: 2a0103e1 12003c42 12003c63 8b010084 (79400084) [13.497522] ---[ end trace 0000000000000000 ]---Show less