Debian

In the Linux kernel, the following vulnerability has been resolved: fs: export anon_inode_make_secure_inode() and fix secretmem LSM bypass Export anon_inode_make_secure_inode() to allow KVM guest_memfd to create anonymous inodes with proper security context. This replaces the current pattern of calling alloc_anon_inode() followed by inode_init_security_anon() for creating security context manually. This change also fixes a security regression in secretmem where the S_PRIVATE flag was not cleared after alloc_anon_inode(), causing LSM/SELinux checks to be bypassed for secretmem file descriptors. As guest_memfd currently resides in the KVM module, we need to export this symbol for use outside the core kernel. In the future, guest_memfd might be moved to core-mm, at which point the symbols no longer would have to be exported. When/if that happens is still unclear.Show less

In the Linux kernel, the following vulnerability has been resolved: regulator: gpio: Fix the out-of-bounds access to drvdata::gpiods drvdata::gpiods is supposed to hold an array of 'gpio_desc' pointers. But the memory is allocated for only one pointer. This will lead to out-of-bounds access later in the code if 'config::ngpios' is > 1. So fix the code to allocate enough memory to hold 'config::ngpios' of GPIO descriptors. While at it, also move the check for memory allocation failure to be below the allocation to make it more readable.Show less

In the Linux kernel, the following vulnerability has been resolved: NFSv4/pNFS: Fix a race to wake on NFS_LAYOUT_DRAIN We found a few different systems hung up in writeback waiting on the same page lock, and one task waiting on the NFS_LAYOUT_DRAIN bit in pnfs_update_layout(), however the pnfs_layout_hdr's plh_outstanding count was zero. It seems most likely that this is another race between the waiter and waker similar to commit ed0172af5d6f ("SUNRPC: Fix a race to wake a sync task"). Fix it up by applying the advised barrier.Show less

In the Linux kernel, the following vulnerability has been resolved: usb: typec: altmodes/displayport: do not index invalid pin_assignments A poorly implemented DisplayPort Alt Mode port partner can indicate that its pin assignment capabilities are greater than the maximum value, DP_PIN_ASSIGN_F. In this case, calls to pin_assignment_show will cause a BRK exception due to an out of bounds array access. Prevent for loop in pin_assignment_show from accessing invalid values in pin_assignments by adding DP_PIN_ASSIGN_MAX value in typec_dp.h and using i < DP_PIN_ASSIGN_MAX as a loop condition.Show less

In the Linux kernel, the following vulnerability has been resolved: drm/i915/gt: Fix timeline left held on VMA alloc error The following error has been reported sporadically by CI when a test unbinds the i915 driver on a ring submission platform: <4> [239.330153] ------------[ cut here ]------------ <4> [239.330166] i915 0000:00:02.0: [drm] drm_WARN_ON(dev_priv->mm.shrink_count) <4> [239.330196] WARNING: CPU: 1 PID: 18570 at drivers/gpu/drm/i915/i915_gem.c:1309 i915_gem_cleanup_early+0x13e/0x150 [i915] ... <4> [239.330640] RIP: 0010:i915_gem_cleanup_early+0x13e/0x150 [i915] ... <4> [239.330942] Call Trace: <4> [239.330944] <TASK> <4> [239.330949] i915_driver_late_release+0x2b/0xa0 [i915] <4> [239.331202] i915_driver_release+0x86/0xa0 [i915] <4> [239.331482] devm_drm_dev_init_release+0x61/0x90 <4> [239.331494] devm_action_release+0x15/0x30 <4> [239.331504] release_nodes+0x3d/0x120 <4> [239.331517] devres_release_all+0x96/0xd0 <4> [239.331533] device_unbind_cleanup+0x12/0x80 <4> [239.331543] device_release_driver_internal+0x23a/0x280 <4> [239.331550] ? bus_find_device+0xa5/0xe0 <4> [239.331563] device_driver_detach+0x14/0x20 ... <4> [357.719679] ---[ end trace 0000000000000000 ]--- If the test also unloads the i915 module then that's followed with: <3> [357.787478] ============================================================================= <3> [357.788006] BUG i915_vma (Tainted: G U W N ): Objects remaining on __kmem_cache_shutdown() <3> [357.788031] ----------------------------------------------------------------------------- <3> [357.788204] Object 0xffff888109e7f480 @offset=29824 <3> [357.788670] Allocated in i915_vma_instance+0xee/0xc10 [i915] age=292729 cpu=4 pid=2244 <4> [357.788994] i915_vma_instance+0xee/0xc10 [i915] <4> [357.789290] init_status_page+0x7b/0x420 [i915] <4> [357.789532] intel_engines_init+0x1d8/0x980 [i915] <4> [357.789772] intel_gt_init+0x175/0x450 [i915] <4> [357.790014] i915_gem_init+0x113/0x340 [i915] <4> [357.790281] i915_driver_probe+0x847/0xed0 [i915] <4> [357.790504] i915_pci_probe+0xe6/0x220 [i915] ... Closer analysis of CI results history has revealed a dependency of the error on a few IGT tests, namely: - igt@api_intel_allocator@fork-simple-stress-signal, - igt@api_intel_allocator@two-level-inception-interruptible, - igt@gem_linear_blits@interruptible, - igt@prime_mmap_coherency@ioctl-errors, which invisibly trigger the issue, then exhibited with first driver unbind attempt. All of the above tests perform actions which are actively interrupted with signals. Further debugging has allowed to narrow that scope down to DRM_IOCTL_I915_GEM_EXECBUFFER2, and ring_context_alloc(), specific to ring submission, in particular. If successful then that function, or its execlists or GuC submission equivalent, is supposed to be called only once per GEM context engine, followed by raise of a flag that prevents the function from being called again. The function is expected to unwind its internal errors itself, so it may be safely called once more after it returns an error. In case of ring submission, the function first gets a reference to the engine's legacy timeline and then allocates a VMA. If the VMA allocation fails, e.g. when i915_vma_instance() called from inside is interrupted with a signal, then ring_context_alloc() fails, leaving the timeline held referenced. On next I915_GEM_EXECBUFFER2 IOCTL, another reference to the timeline is got, and only that last one is put on successful completion. As a consequence, the legacy timeline, with its underlying engine status page's VMA object, is still held and not released on driver unbind. Get the legacy timeline only after successful allocation of the context engine's VMA. v2: Add a note on other submission methods (Krzysztof Karas): Both execlists and GuC submission use lrc_alloc() which seems free from a similar issue. (cherry picked from commit cc43422b3cc79eacff4c5a8ba0d224688ca9dd4f)Show less

In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx5: Initialize obj_event->obj_sub_list before xa_insert The obj_event may be loaded immediately after inserted, then if the list_head is not initialized then we may get a poisonous pointer. This fixes the crash below: mlx5_core 0000:03:00.0: MLX5E: StrdRq(1) RqSz(8) StrdSz(2048) RxCqeCmprss(0 enhanced) mlx5_core.sf mlx5_core.sf.4: firmware version: 32.38.3056 mlx5_core 0000:03:00.0 en3f0pf0sf2002: renamed from eth0 mlx5_core.sf mlx5_core.sf.4: Rate limit: 127 rates are supported, range: 0Mbps to 195312Mbps IPv6: ADDRCONF(NETDEV_CHANGE): en3f0pf0sf2002: link becomes ready Unable to handle kernel NULL pointer dereference at virtual address 0000000000000060 Mem abort info: ESR = 0x96000006 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000006 CM = 0, WnR = 0 user pgtable: 4k pages, 48-bit VAs, pgdp=00000007760fb000 [0000000000000060] pgd=000000076f6d7003, p4d=000000076f6d7003, pud=0000000777841003, pmd=0000000000000000 Internal error: Oops: 96000006 [#1] SMP Modules linked in: ipmb_host(OE) act_mirred(E) cls_flower(E) sch_ingress(E) mptcp_diag(E) udp_diag(E) raw_diag(E) unix_diag(E) tcp_diag(E) inet_diag(E) binfmt_misc(E) bonding(OE) rdma_ucm(OE) rdma_cm(OE) iw_cm(OE) ib_ipoib(OE) ib_cm(OE) isofs(E) cdrom(E) mst_pciconf(OE) ib_umad(OE) mlx5_ib(OE) ipmb_dev_int(OE) mlx5_core(OE) kpatch_15237886(OEK) mlxdevm(OE) auxiliary(OE) ib_uverbs(OE) ib_core(OE) psample(E) mlxfw(OE) tls(E) sunrpc(E) vfat(E) fat(E) crct10dif_ce(E) ghash_ce(E) sha1_ce(E) sbsa_gwdt(E) virtio_console(E) ext4(E) mbcache(E) jbd2(E) xfs(E) libcrc32c(E) mmc_block(E) virtio_net(E) net_failover(E) failover(E) sha2_ce(E) sha256_arm64(E) nvme(OE) nvme_core(OE) gpio_mlxbf3(OE) mlx_compat(OE) mlxbf_pmc(OE) i2c_mlxbf(OE) sdhci_of_dwcmshc(OE) pinctrl_mlxbf3(OE) mlxbf_pka(OE) gpio_generic(E) i2c_core(E) mmc_core(E) mlxbf_gige(OE) vitesse(E) pwr_mlxbf(OE) mlxbf_tmfifo(OE) micrel(E) mlxbf_bootctl(OE) virtio_ring(E) virtio(E) ipmi_devintf(E) ipmi_msghandler(E) [last unloaded: mst_pci] CPU: 11 PID: 20913 Comm: rte-worker-11 Kdump: loaded Tainted: G OE K 5.10.134-13.1.an8.aarch64 #1 Hardware name: https://www.mellanox.com BlueField-3 SmartNIC Main Card/BlueField-3 SmartNIC Main Card, BIOS 4.2.2.12968 Oct 26 2023 pstate: a0400089 (NzCv daIf +PAN -UAO -TCO BTYPE=--) pc : dispatch_event_fd+0x68/0x300 [mlx5_ib] lr : devx_event_notifier+0xcc/0x228 [mlx5_ib] sp : ffff80001005bcf0 x29: ffff80001005bcf0 x28: 0000000000000001 x27: ffff244e0740a1d8 x26: ffff244e0740a1d0 x25: ffffda56beff5ae0 x24: ffffda56bf911618 x23: ffff244e0596a480 x22: ffff244e0596a480 x21: ffff244d8312ad90 x20: ffff244e0596a480 x19: fffffffffffffff0 x18: 0000000000000000 x17: 0000000000000000 x16: ffffda56be66d620 x15: 0000000000000000 x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000040 x10: ffffda56bfcafb50 x9 : ffffda5655c25f2c x8 : 0000000000000010 x7 : 0000000000000000 x6 : ffff24545a2e24b8 x5 : 0000000000000003 x4 : ffff80001005bd28 x3 : 0000000000000000 x2 : 0000000000000000 x1 : ffff244e0596a480 x0 : ffff244d8312ad90 Call trace: dispatch_event_fd+0x68/0x300 [mlx5_ib] devx_event_notifier+0xcc/0x228 [mlx5_ib] atomic_notifier_call_chain+0x58/0x80 mlx5_eq_async_int+0x148/0x2b0 [mlx5_core] atomic_notifier_call_chain+0x58/0x80 irq_int_handler+0x20/0x30 [mlx5_core] __handle_irq_event_percpu+0x60/0x220 handle_irq_event_percpu+0x3c/0x90 handle_irq_event+0x58/0x158 handle_fasteoi_irq+0xfc/0x188 generic_handle_irq+0x34/0x48 ...Show less

In the Linux kernel, the following vulnerability has been resolved: ACPICA: Refuse to evaluate a method if arguments are missing As reported in [1], a platform firmware update that increased the number of method parameters and forgot to update a least one of its callers, caused ACPICA to crash due to use-after-free. Since this a result of a clear AML issue that arguably cannot be fixed up by the interpreter (it cannot produce missing data out of thin air), address it by making ACPICA refuse to evaluate a method if the caller attempts to pass fewer arguments than expected to it.Show less

In the Linux kernel, the following vulnerability has been resolved: net: usb: lan78xx: fix WARN in __netif_napi_del_locked on disconnect Remove redundant netif_napi_del() call from disconnect path. A WARN may be triggered in __netif_napi_del_locked() during USB device disconnect: WARNING: CPU: 0 PID: 11 at net/core/dev.c:7417 __netif_napi_del_locked+0x2b4/0x350 This happens because netif_napi_del() is called in the disconnect path while NAPI is still enabled. However, it is not necessary to call netif_napi_del() explicitly, since unregister_netdev() will handle NAPI teardown automatically and safely. Removing the redundant call avoids triggering the warning. Full trace: lan78xx 1-1:1.0 enu1: Failed to read register index 0x000000c4. ret = -ENODEV lan78xx 1-1:1.0 enu1: Failed to set MAC down with error -ENODEV lan78xx 1-1:1.0 enu1: Link is Down lan78xx 1-1:1.0 enu1: Failed to read register index 0x00000120. ret = -ENODEV ------------[ cut here ]------------ WARNING: CPU: 0 PID: 11 at net/core/dev.c:7417 __netif_napi_del_locked+0x2b4/0x350 Modules linked in: flexcan can_dev fuse CPU: 0 UID: 0 PID: 11 Comm: kworker/0:1 Not tainted 6.16.0-rc2-00624-ge926949dab03 #9 PREEMPT Hardware name: SKOV IMX8MP CPU revC - bd500 (DT) Workqueue: usb_hub_wq hub_event pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : __netif_napi_del_locked+0x2b4/0x350 lr : __netif_napi_del_locked+0x7c/0x350 sp : ffffffc085b673c0 x29: ffffffc085b673c0 x28: ffffff800b7f2000 x27: ffffff800b7f20d8 x26: ffffff80110bcf58 x25: ffffff80110bd978 x24: 1ffffff0022179eb x23: ffffff80110bc000 x22: ffffff800b7f5000 x21: ffffff80110bc000 x20: ffffff80110bcf38 x19: ffffff80110bcf28 x18: dfffffc000000000 x17: ffffffc081578940 x16: ffffffc08284cee0 x15: 0000000000000028 x14: 0000000000000006 x13: 0000000000040000 x12: ffffffb0022179e8 x11: 1ffffff0022179e7 x10: ffffffb0022179e7 x9 : dfffffc000000000 x8 : 0000004ffdde8619 x7 : ffffff80110bcf3f x6 : 0000000000000001 x5 : ffffff80110bcf38 x4 : ffffff80110bcf38 x3 : 0000000000000000 x2 : 0000000000000000 x1 : 1ffffff0022179e7 x0 : 0000000000000000 Call trace: __netif_napi_del_locked+0x2b4/0x350 (P) lan78xx_disconnect+0xf4/0x360 usb_unbind_interface+0x158/0x718 device_remove+0x100/0x150 device_release_driver_internal+0x308/0x478 device_release_driver+0x1c/0x30 bus_remove_device+0x1a8/0x368 device_del+0x2e0/0x7b0 usb_disable_device+0x244/0x540 usb_disconnect+0x220/0x758 hub_event+0x105c/0x35e0 process_one_work+0x760/0x17b0 worker_thread+0x768/0xce8 kthread+0x3bc/0x690 ret_from_fork+0x10/0x20 irq event stamp: 211604 hardirqs last enabled at (211603): [<ffffffc0828cc9ec>] _raw_spin_unlock_irqrestore+0x84/0x98 hardirqs last disabled at (211604): [<ffffffc0828a9a84>] el1_dbg+0x24/0x80 softirqs last enabled at (211296): [<ffffffc080095f10>] handle_softirqs+0x820/0xbc8 softirqs last disabled at (210993): [<ffffffc080010288>] __do_softirq+0x18/0x20 ---[ end trace 0000000000000000 ]--- lan78xx 1-1:1.0 enu1: failed to kill vid 0081/0Show less

In the Linux kernel, the following vulnerability has been resolved: mtd: spinand: fix memory leak of ECC engine conf Memory allocated for the ECC engine conf is not released during spinand cleanup. Below kmemleak trace is seen for this memory leak: unreferenced object 0xffffff80064f00e0 (size 8): comm "swapper/0", pid 1, jiffies 4294937458 hex dump (first 8 bytes): 00 00 00 00 00 00 00 00 ........ backtrace (crc 0): kmemleak_alloc+0x30/0x40 __kmalloc_cache_noprof+0x208/0x3c0 spinand_ondie_ecc_init_ctx+0x114/0x200 nand_ecc_init_ctx+0x70/0xa8 nanddev_ecc_engine_init+0xec/0x27c spinand_probe+0xa2c/0x1620 spi_mem_probe+0x130/0x21c spi_probe+0xf0/0x170 really_probe+0x17c/0x6e8 __driver_probe_device+0x17c/0x21c driver_probe_device+0x58/0x180 __device_attach_driver+0x15c/0x1f8 bus_for_each_drv+0xec/0x150 __device_attach+0x188/0x24c device_initial_probe+0x10/0x20 bus_probe_device+0x11c/0x160 Fix the leak by calling nanddev_ecc_engine_cleanup() inside spinand_cleanup().Show less

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix iteration of extrefs during log replay At __inode_add_ref() when processing extrefs, if we jump into the next label we have an undefined value of victim_name.len, since we haven't initialized it before we did the goto. This results in an invalid memory access in the next iteration of the loop since victim_name.len was not initialized to the length of the name of the current extref. Fix this by initializing victim_name.len with the current extref's name length.Show less

In the Linux kernel, the following vulnerability has been resolved: rose: fix dangling neighbour pointers in rose_rt_device_down() There are two bugs in rose_rt_device_down() that can cause use-after-free: 1. The loop bound `t->count` is modified within the loop, which can cause the loop to terminate early and miss some entries. 2. When removing an entry from the neighbour array, the subsequent entries are moved up to fill the gap, but the loop index `i` is still incremented, causing the next entry to be skipped. For example, if a node has three neighbours (A, A, B) with count=3 and A is being removed, the second A is not checked. i=0: (A, A, B) -> (A, B) with count=2 ^ checked i=1: (A, B) -> (A, B) with count=2 ^ checked (B, not A!) i=2: (doesn't occur because i < count is false) This leaves the second A in the array with count=2, but the rose_neigh structure has been freed. Code that accesses these entries assumes that the first `count` entries are valid pointers, causing a use-after-free when it accesses the dangling pointer. Fix both issues by iterating over the array in reverse order with a fixed loop bound. This ensures that all entries are examined and that the removal of an entry doesn't affect subsequent iterations.Show less

In the Linux kernel, the following vulnerability has been resolved: virtio-net: ensure the received length does not exceed allocated size In xdp_linearize_page, when reading the following buffers from the ring, we forget to check the received length with the true allocate size. This can lead to an out-of-bound read. This commit adds that missing check.Show less

In the Linux kernel, the following vulnerability has been resolved: drm/v3d: Disable interrupts before resetting the GPU Currently, an interrupt can be triggered during a GPU reset, which can lead to GPU hangs and NULL pointer dereference in an interrupt context as shown in the following trace: [ 314.035040] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000c0 [ 314.043822] Mem abort info: [ 314.046606] ESR = 0x0000000096000005 [ 314.050347] EC = 0x25: DABT (current EL), IL = 32 bits [ 314.055651] SET = 0, FnV = 0 [ 314.058695] EA = 0, S1PTW = 0 [ 314.061826] FSC = 0x05: level 1 translation fault [ 314.066694] Data abort info: [ 314.069564] ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000 [ 314.075039] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 314.080080] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 314.085382] user pgtable: 4k pages, 39-bit VAs, pgdp=0000000102728000 [ 314.091814] [00000000000000c0] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 [ 314.100511] Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP [ 314.106770] Modules linked in: v3d i2c_brcmstb vc4 snd_soc_hdmi_codec gpu_sched drm_shmem_helper drm_display_helper cec drm_dma_helper drm_kms_helper drm drm_panel_orientation_quirks snd_soc_core snd_compress snd_pcm_dmaengine snd_pcm snd_timer snd backlight [ 314.129654] CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.12.25+rpt-rpi-v8 #1 Debian 1:6.12.25-1+rpt1 [ 314.139388] Hardware name: Raspberry Pi 4 Model B Rev 1.4 (DT) [ 314.145211] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 314.152165] pc : v3d_irq+0xec/0x2e0 [v3d] [ 314.156187] lr : v3d_irq+0xe0/0x2e0 [v3d] [ 314.160198] sp : ffffffc080003ea0 [ 314.163502] x29: ffffffc080003ea0 x28: ffffffec1f184980 x27: 021202b000000000 [ 314.170633] x26: ffffffec1f17f630 x25: ffffff8101372000 x24: ffffffec1f17d9f0 [ 314.177764] x23: 000000000000002a x22: 000000000000002a x21: ffffff8103252000 [ 314.184895] x20: 0000000000000001 x19: 00000000deadbeef x18: 0000000000000000 [ 314.192026] x17: ffffff94e51d2000 x16: ffffffec1dac3cb0 x15: c306000000000000 [ 314.199156] x14: 0000000000000000 x13: b2fc982e03cc5168 x12: 0000000000000001 [ 314.206286] x11: ffffff8103f8bcc0 x10: ffffffec1f196868 x9 : ffffffec1dac3874 [ 314.213416] x8 : 0000000000000000 x7 : 0000000000042a3a x6 : ffffff810017a180 [ 314.220547] x5 : ffffffec1ebad400 x4 : ffffffec1ebad320 x3 : 00000000000bebeb [ 314.227677] x2 : 0000000000000000 x1 : 0000000000000000 x0 : 0000000000000000 [ 314.234807] Call trace: [ 314.237243] v3d_irq+0xec/0x2e0 [v3d] [ 314.240906] __handle_irq_event_percpu+0x58/0x218 [ 314.245609] handle_irq_event+0x54/0xb8 [ 314.249439] handle_fasteoi_irq+0xac/0x240 [ 314.253527] handle_irq_desc+0x48/0x68 [ 314.257269] generic_handle_domain_irq+0x24/0x38 [ 314.261879] gic_handle_irq+0x48/0xd8 [ 314.265533] call_on_irq_stack+0x24/0x58 [ 314.269448] do_interrupt_handler+0x88/0x98 [ 314.273624] el1_interrupt+0x34/0x68 [ 314.277193] el1h_64_irq_handler+0x18/0x28 [ 314.281281] el1h_64_irq+0x64/0x68 [ 314.284673] default_idle_call+0x3c/0x168 [ 314.288675] do_idle+0x1fc/0x230 [ 314.291895] cpu_startup_entry+0x3c/0x50 [ 314.295810] rest_init+0xe4/0xf0 [ 314.299030] start_kernel+0x5e8/0x790 [ 314.302684] __primary_switched+0x80/0x90 [ 314.306691] Code: 940029eb 360ffc13 f9442ea0 52800001 (f9406017) [ 314.312775] ---[ end trace 0000000000000000 ]--- [ 314.317384] Kernel panic - not syncing: Oops: Fatal exception in interrupt [ 314.324249] SMP: stopping secondary CPUs [ 314.328167] Kernel Offset: 0x2b9da00000 from 0xffffffc080000000 [ 314.334076] PHYS_OFFSET: 0x0 [ 314.336946] CPU features: 0x08,00002013,c0200000,0200421b [ 314.342337] Memory Limit: none [ 314.345382] ---[ end Kernel panic - not syncing: Oops: Fatal exception in interrupt ]--- Before resetting the G ---truncated---Show less

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix a race between renames and directory logging We have a race between a rename and directory inode logging that if it happens and we crash/power fail before the rename completes, the next time the filesystem is mounted, the log replay code will end up deleting the file that was being renamed. This is best explained following a step by step analysis of an interleaving of steps that lead into this situation. Consider the initial conditions: 1) We are at transaction N; 2) We have directories A and B created in a past transaction (< N); 3) We have inode X corresponding to a file that has 2 hardlinks, one in directory A and the other in directory B, so we'll name them as "A/foo_link1" and "B/foo_link2". Both hard links were persisted in a past transaction (< N); 4) We have inode Y corresponding to a file that as a single hard link and is located in directory A, we'll name it as "A/bar". This file was also persisted in a past transaction (< N). The steps leading to a file loss are the following and for all of them we are under transaction N: 1) Link "A/foo_link1" is removed, so inode's X last_unlink_trans field is updated to N, through btrfs_unlink() -> btrfs_record_unlink_dir(); 2) Task A starts a rename for inode Y, with the goal of renaming from "A/bar" to "A/baz", so we enter btrfs_rename(); 3) Task A inserts the new BTRFS_INODE_REF_KEY for inode Y by calling btrfs_insert_inode_ref(); 4) Because the rename happens in the same directory, we don't set the last_unlink_trans field of directoty A's inode to the current transaction id, that is, we don't cal btrfs_record_unlink_dir(); 5) Task A then removes the entries from directory A (BTRFS_DIR_ITEM_KEY and BTRFS_DIR_INDEX_KEY items) when calling __btrfs_unlink_inode() (actually the dir index item is added as a delayed item, but the effect is the same); 6) Now before task A adds the new entry "A/baz" to directory A by calling btrfs_add_link(), another task, task B is logging inode X; 7) Task B starts a fsync of inode X and after logging inode X, at btrfs_log_inode_parent() it calls btrfs_log_all_parents(), since inode X has a last_unlink_trans value of N, set at in step 1; 8) At btrfs_log_all_parents() we search for all parent directories of inode X using the commit root, so we find directories A and B and log them. Bu when logging direct A, we don't have a dir index item for inode Y anymore, neither the old name "A/bar" nor for the new name "A/baz" since the rename has deleted the old name but has not yet inserted the new name - task A hasn't called yet btrfs_add_link() to do that. Note that logging directory A doesn't fallback to a transaction commit because its last_unlink_trans has a lower value than the current transaction's id (see step 4); 9) Task B finishes logging directories A and B and gets back to btrfs_sync_file() where it calls btrfs_sync_log() to persist the log tree; 10) Task B successfully persisted the log tree, btrfs_sync_log() completed with success, and a power failure happened. We have a log tree without any directory entry for inode Y, so the log replay code deletes the entry for inode Y, name "A/bar", from the subvolume tree since it doesn't exist in the log tree and the log tree is authorative for its index (we logged a BTRFS_DIR_LOG_INDEX_KEY item that covers the index range for the dentry that corresponds to "A/bar"). Since there's no other hard link for inode Y and the log replay code deletes the name "A/bar", the file is lost. The issue wouldn't happen if task B synced the log only after task A called btrfs_log_new_name(), which would update the log with the new name for inode Y ("A/bar"). Fix this by pinning the log root during renames before removing the old directory entry, and unpinning af ---truncated---Show less

In the Linux kernel, the following vulnerability has been resolved: maple_tree: fix MA_STATE_PREALLOC flag in mas_preallocate() Temporarily clear the preallocation flag when explicitly requesting allocations. Pre-existing allocations are already counted against the request through mas_node_count_gfp(), but the allocations will not happen if the MA_STATE_PREALLOC flag is set. This flag is meant to avoid re-allocating in bulk allocation mode, and to detect issues with preallocation calculations. The MA_STATE_PREALLOC flag should also always be set on zero allocations so that detection of underflow allocations will print a WARN_ON() during consumption. User visible effect of this flaw is a WARN_ON() followed by a null pointer dereference when subsequent requests for larger number of nodes is ignored, such as the vma merge retry in mmap_region() caused by drivers altering the vma flags (which happens in v6.6, at least)Show less

In the Linux kernel, the following vulnerability has been resolved: drm/tegra: Fix a possible null pointer dereference In tegra_crtc_reset(), new memory is allocated with kzalloc(), but no check is performed. Before calling __drm_atomic_helper_crtc_reset, state should be checked to prevent possible null pointer dereference.Show less

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Add null pointer check for get_first_active_display() The function mod_hdcp_hdcp1_enable_encryption() calls the function get_first_active_display(), but does not check its return value. The return value is a null pointer if the display list is empty. This will lead to a null pointer dereference in mod_hdcp_hdcp2_enable_encryption(). Add a null pointer check for get_first_active_display() and return MOD_HDCP_STATUS_DISPLAY_NOT_FOUND if the function return null.Show less

In the Linux kernel, the following vulnerability has been resolved: drm/msm/gpu: Fix crash when throttling GPU immediately during boot There is a small chance that the GPU is already hot during boot. In that case, the call to of_devfreq_cooling_register() will immediately try to apply devfreq cooling, as seen in the following crash: Unable to handle kernel paging request at virtual address 0000000000014110 pc : a6xx_gpu_busy+0x1c/0x58 [msm] lr : msm_devfreq_get_dev_status+0xbc/0x140 [msm] Call trace: a6xx_gpu_busy+0x1c/0x58 [msm] (P) devfreq_simple_ondemand_func+0x3c/0x150 devfreq_update_target+0x44/0xd8 qos_max_notifier_call+0x30/0x84 blocking_notifier_call_chain+0x6c/0xa0 pm_qos_update_target+0xd0/0x110 freq_qos_apply+0x3c/0x74 apply_constraint+0x88/0x148 __dev_pm_qos_update_request+0x7c/0xcc dev_pm_qos_update_request+0x38/0x5c devfreq_cooling_set_cur_state+0x98/0xf0 __thermal_cdev_update+0x64/0xb4 thermal_cdev_update+0x4c/0x58 step_wise_manage+0x1f0/0x318 __thermal_zone_device_update+0x278/0x424 __thermal_cooling_device_register+0x2bc/0x308 thermal_of_cooling_device_register+0x10/0x1c of_devfreq_cooling_register_power+0x240/0x2bc of_devfreq_cooling_register+0x14/0x20 msm_devfreq_init+0xc4/0x1a0 [msm] msm_gpu_init+0x304/0x574 [msm] adreno_gpu_init+0x1c4/0x2e0 [msm] a6xx_gpu_init+0x5c8/0x9c8 [msm] adreno_bind+0x2a8/0x33c [msm] ... At this point we haven't initialized the GMU at all yet, so we cannot read the GMU registers inside a6xx_gpu_busy(). A similar issue was fixed before in commit 6694482a70e9 ("drm/msm: Avoid unclocked GMU register access in 6xx gpu_busy"): msm_devfreq_init() does call devfreq_suspend_device(), but unlike msm_devfreq_suspend(), it doesn't set the df->suspended flag accordingly. This means the df->suspended flag does not match the actual devfreq state after initialization and msm_devfreq_get_dev_status() will end up accessing GMU registers, causing the crash. Fix this by setting df->suspended correctly during initialization. Patchwork: https://patchwork.freedesktop.org/patch/650772/Show less

In the Linux kernel, the following vulnerability has been resolved: posix-cpu-timers: fix race between handle_posix_cpu_timers() and posix_cpu_timer_del() If an exiting non-autoreaping task has already passed exit_notify() and calls handle_posix_cpu_timers() from IRQ, it can be reaped by its parent or debugger right after unlock_task_sighand(). If a concurrent posix_cpu_timer_del() runs at that moment, it won't be able to detect timer->it.cpu.firing != 0: cpu_timer_task_rcu() and/or lock_task_sighand() will fail. Add the tsk->exit_state check into run_posix_cpu_timers() to fix this. This fix is not needed if CONFIG_POSIX_CPU_TIMERS_TASK_WORK=y, because exit_task_work() is called before exit_notify(). But the check still makes sense, task_work_add(&tsk->posix_cputimers_work.work) will fail anyway in this case.Show less

In the Linux kernel, the following vulnerability has been resolved: net/sched: Always pass notifications when child class becomes empty Certain classful qdiscs may invoke their classes' dequeue handler on an enqueue operation. This may unexpectedly empty the child qdisc and thus make an in-flight class passive via qlen_notify(). Most qdiscs do not expect such behaviour at this point in time and may re-activate the class eventually anyways which will lead to a use-after-free. The referenced fix commit attempted to fix this behavior for the HFSC case by moving the backlog accounting around, though this turned out to be incomplete since the parent's parent may run into the issue too. The following reproducer demonstrates this use-after-free: tc qdisc add dev lo root handle 1: drr tc filter add dev lo parent 1: basic classid 1:1 tc class add dev lo parent 1: classid 1:1 drr tc qdisc add dev lo parent 1:1 handle 2: hfsc def 1 tc class add dev lo parent 2: classid 2:1 hfsc rt m1 8 d 1 m2 0 tc qdisc add dev lo parent 2:1 handle 3: netem tc qdisc add dev lo parent 3:1 handle 4: blackhole echo 1 | socat -u STDIN UDP4-DATAGRAM:127.0.0.1:8888 tc class delete dev lo classid 1:1 echo 1 | socat -u STDIN UDP4-DATAGRAM:127.0.0.1:8888 Since backlog accounting issues leading to a use-after-frees on stale class pointers is a recurring pattern at this point, this patch takes a different approach. Instead of trying to fix the accounting, the patch ensures that qdisc_tree_reduce_backlog always calls qlen_notify when the child qdisc is empty. This solves the problem because deletion of qdiscs always involves a call to qdisc_reset() and / or qdisc_purge_queue() which ultimately resets its qlen to 0 thus causing the following qdisc_tree_reduce_backlog() to report to the parent. Note that this may call qlen_notify on passive classes multiple times. This is not a problem after the recent patch series that made all the classful qdiscs qlen_notify() handlers idempotent.Show less