Wolfssl

When an application enables both OCSP and CRL revocation checking on one WOLFSSL_CTX or certificate manager, wolfSSL skips the CRL check for any peer certificate that carries no Authority Information Access OCSP URL, and accepts a certificate the loaded CRL lists as revoked. The soft-fail policy for a missing responder collapses the OCSP result onto success before the code decides whether the CRL fallback is still needed, so "no responder exists" becomes indistinguishable from "the responder answered good". Affected builds define both HAVE_OCSP and HAVE_CRL: --enable-ocsp --enable-crl directly, and implicitly --enable-all, --enable-distro, --enable-curl, --enable-nginx, --enable-haproxy, --enable-stunnel, --enable-lighty, --enable-wpas, --enable-strongswan, --enable-mosquitto, --enable-jni, --enable-openvpn and --enable-krb. An application is affected only if it calls both wolfSSL_CTX_EnableOCSP() (or wolfSSL_EnableOCSP() / wolfSSL_CertManagerEnableOCSP()) and wolfSSL_CTX_EnableCRL() (or the equivalents) with a CRL loaded; an application that uses OCSP stapling alone through wolfSSL_CTX_EnableOCSPStapling() is not affected, because that sets up a separate OCSP instance. The defect sits in ProcessPeerCerts() and is reachable over TLS 1.0 through TLS 1.3 and DTLS, both on a client verifying a server certificate and on a server verifying a client certificate under mutual or post-handshake authentication. When the skipped check falls on a chain certificate rather than the leaf, the unchecked intermediate is promoted into the certificate manager and stays a trusted signer for every later connection on that context, so an affected long-running process needs its WOLFSSL_CTX torn down and not only its library replaced. All wolfSSL versions from 5.9.2 and earlier are affected; on versions 5.9.1 and 5.9.2 the WOLFSSL_OCSP_CHECKALL configuration fails closed with OCSP_NEED_URL, which leaves wolfSSL_CTX_EnableOCSP() without CHECKALL as the exposed configuration on 5.9.2.Show less

A (D)TLS 1.2 client can accept a ChangeCipherSpec message before it has sent its ClientKeyExchange. No master secret has been derived at that point, so the client installs read keys derived from a known (deterministic) key and checks the server's Finished against that same key. An out-of-order ChangeCipherSpec can therefore be used by an attacker to complete the handshake in place of the server and send data the client accepts as authentic. The client's own traffic still uses correctly derived keys, so the attacker cannot read it, and the genuine server never completes the handshake. DTLS 1.2 clients are exposed because a datagram read can deliver the out-of-order records on its own. TLS 1.2 clients are exposed when the application supplies received bytes with wolfSSL_inject() or enables read ahead. For certificate suites, the attacker must be in a man-in-the-middle position. For PSK (Pre Shared Key) connections, any fake server can succeed without knowing the PSK.Show less

MatchTrustedPeer ignores the public key used, leading to forged CA clones passing verification. Affected builds are any that enable the macro WOLFSSL_TRUST_PEER_CERT and load CA certificates with wolfSSL_CTX_trust_peer_cert() or wolfSSL_trust_peer_cert(). The peer must know the certificates being loaded to either of those APIs to take advantage of the issue. When OPENSSL_COMPATIBLE_DEFAULTS is also defined this widens the affected API to include all CA certificate loading. Both macros are defined when using autoconf builds such as (nginx, haproxy, stunnel, wpas, apache httpd, hitch, bind, rsyslog, ffmpeg, all, distro). When the certificate is listed as a trusted peer certificate the issue previously allowed for a malicious (D)TLS server to bypass authentication once knowing which CA’s the client would accept. This also affects mutual authentication cases where the client knows which CA’s the server has loaded. If building with any of these configurations and using (D)TLS where the loaded CA’s could be known and authentication of the peer is desired, users should either: update to the latest wolfSSL version, apply the fix patch, or use the configure flag --disable-openssl-compatible-defaults and not load CA’s with wolfSSL_CTX_trust_peer_cert() or wolfSSL_trust_peer_cert() to mitigate the issue.Show less

A failed X509_verify_cert call permanently plants an unverified attacker CA in the shared CertManager, bypassing certificate validation in every type-blind sibling consumer (native TLS, OCSP, CRL, direct CM verify). This affects version 5.8.4 through 5.9.2 of wolfSSL with the macros (OPENSSL_EXTRA && !NO_CERTS && !WOLFCRYPT_ONLY) defined or built with --enable-opensslextra and the application is specifically making calls to the X509_verify_cert function.Show less

A certificate with no dNSName SAN but another SAN type present (e.g. registeredID or iPAddress) bypassed the Subject CN dNSName name-constraint check. The CN-as-DNS fallback was gated on cert->subjectCN != NULL && cert->altNames == NULL && !cert->isCA instead of "no dNSName SAN", so an out-of-scope CN was accepted. This incomplete fix from CVE-2026-6731, leading to the name-constraint check issue, was introduced in wolfSSL version 5.9.2.Show less

wolfSSL versions 5.9.2 and earlier contain a flaw in the X.509 certificate validation logic where it fails to properly enforce NameConstraints extensions when there is an unconstrained CA tier between a name-constrained intermediate CA and the leaf certificate. wolfSSL incorrectly accepted certificates for hostnames they shouldn't be allowed to cover, due to a chain-walking state-machine bug that resets the validation state when encountering an intermediate without NameConstraints, thereby bypassing cryptographic delegation controls. This defect exists in the default build configuration that makes use of certificates where name constraint extensions are used. Thanks to Jack Lloyd, PathDiff, and Ben Smyth for reporting the issue.Show less

In wolfSSL versions 5.7.2 through 5.9.2 there is a client-side implementation flaw in RFC 6961, multiple OCSP response stapling, which can lead to certificate forgery. When a wolfSSL client enables OCSP stapling with the HAVE_CERTIFICATE_STATUS_REQUEST_V2 feature and calls wolfSSL_UseOCSPStaplingV2(ssl, WOLFSSL_CSR2_OCSP_MULTI, options), the client accepts any certificate in the peer's chain as a certificate authority without verifying that the certificate is actually authorized to act as one. This means that an attacker who possesses any certificate that chains to a CA trusted by the client (along with its private key) can forge certificates for arbitrary identities that will be accepted as valid by the client. The end entity certificate of the server is stored in the persistent trust store, affecting subsequent connections that reuse the context even when OCSP multi usage is not employed. Found by internal wolfSSL testing.Show less

In all builds that make use of (D)TLS, including default builds, there is a series of conditional states during the TLS shutdown which could lead to a heap-use-after free. If an application ended up getting a partial wolfSSL_read() which is sometimes caused by a small user buffer passed in, then called wolfSSL_shutdown for a bidirectional close and attempted to wolfSSL_read() again while the peer continues trying to send data during the shutdown it would lead to a state where a potential heap-use-after free happened.Show less

Without NO_SESSION_CACHE_REF, wolfSSL_get_session() does not return a session object but a ClientSession reference of the form {row, index, hash(sessionID)} into the process-global SessionCache, and ClientSessionToSession() validates it against that hash alone. Because the TLS 1.2 session ID is chosen by the server and sent in clear, AddSessionToCache() matches any other server's session on the same ID and overwrites the client-side entry with that server's master secret, cipher suite and version, while the handle continues to resolve; nothing on the write path compares the peer, the application's server ID or the WOLFSSL_CTX. Resuming through the handle then produces an abbreviated handshake in which no Certificate message is sent, so neither chain verification nor wolfSSL_check_domain_name() runs, and the attacker is accepted as the original server for the whole of that connection. Affected builds are those leaving NO_SESSION_CACHE_REF, NO_SESSION_CACHE, NO_CLIENT_CACHE and TITAN_SESSION_CACHE all undefined, which includes a plain ./configure, --enable-opensslextra and --enable-opensslall; fifteen integration options define NO_SESSION_CACHE_REF and are therefore not affected, among them --enable-all, --enable-distro, --enable-curl, --enable-nginx, --enable-haproxy, --enable-stunnel, --enable-wpas and the rest of the OPENSSL_COMPATIBLE_DEFAULTS family, and --enable-leanpsk, --enable-leantls, --enable-lowresource and --enable-tinytls13 disable the cache outright. The application must use the legacy reference flow, wolfSSL_get_session() or SSL_get_session() followed by wolfSSL_set_session(); wolfSSL_get1_session() returns the session object itself and is not affected, nor are wolfSSL_SetServerID() lookups. Only TLS 1.2 and below and DTLS 1.2 and below are reachable, since TLS 1.3 and ticket resumption with an empty ServerHello session ID both use a client-chosen cache key. The poisoned entry lives in the process-global cache, so it crosses WOLFSSL_CTX boundaries and persists until the entry is evicted or the session times out, 500 seconds by default. Releases v5.3.0 through v5.9.2 are affected; the fix adds a per-write generation counter to the cache and raises WOLFSSL_CACHE_VERSION from 2 to 3, so a cache persisted by an older build is rejected by a fixed one.Show less

Under WOLFSSL_SMALL_CERT_VERIFY, ProcessPeerCertParse() runs the certificate signature check separately from the parse to keep peak memory down, then merges the two results, but it merged the signature result back only when the parse returned 0, so any parse error hid it. ParseCertRelative() reaches its validity-date, name-constraint and critical-extension checks only after ConfirmSignature() has passed, so splitting the signature check out inverts the precedence that makes "override date errors" a sound policy, and ASN_SIG_CONFIRM_E is never surfaced anywhere. The attacker needs no key material from the real PKI and no CA compromise: a self-made certificate carrying the expected subject name, the trusted CA's subject as its issuer, arbitrary bytes where the signature goes, a validity window in the past and the attacker's own key pair is sufficient. Affected builds define WOLFSSL_SMALL_CERT_VERIFY, which is off by default, is not set implicitly by any platform or preset header, and is not reachable from any CMake option; the autotools routes are --enable-lowresource, --enable-leantls, --enable-tinytls13=cert and --enable-tinytls13=mutualauth, and examples/configs/user_settings_embedded.h reaches it through WC_CFG_SMALL_CERT_VERIFY, which ships as 0, while neither --enable-all nor --enable-distro enables it at all. The application must additionally install a verify callback through wolfSSL_CTX_set_verify() or wolfSSL_set_verify() with WOLFSSL_VERIFY_PEER that returns 1 for ASN_BEFORE_DATE_E or ASN_AFTER_DATE_E; wolfSSL ships this exact shape as myVerify() in wolfssl/test.h under VERIFY_OVERRIDE_DATE_ERR, which examples/client -D selects. An application with no callback, or whose callback returns preverify for date errors, still fails the handshake, and wolfSSL_CertManagerVerifyBuffer() and wc_CheckCertSignature() report ASN_SIG_CONFIRM_E correctly in the same binary. TLS 1.2 and TLS 1.3 are affected in both directions, and DTLS reaches the same function; where the forged certificate is a chain certificate the callback's consent causes it to be cached in the WOLFSSL_CTX certificate manager, so an exposed deployment must restart the context or the process rather than merely reconnect.Show less

wc_Blake2bHmacFinal and wc_Blake2sHmacFinal discard the message when the key length exceeds the block size, producing a MAC that is independent of the input. When the supplied key is longer than the BLAKE2 block size the key-hashing branch reinitialized the running hash state, discarding the accumulated message data, so the resulting MAC depended only on the key and not on the message being authenticated. This bug is specific to the HMAC-BLAKE2 APIs that were added in wolfSSL version 5.9.0.Show less

HMAC zero-length tag forgery in EVP_DigestVerifyFinal, where a zero-length tag could be accepted as valid during HMAC verification. In the OpenSSL-compatibility HMAC verify path the supplied signature length was only checked as not exceeding the MAC length, so a zero-length or otherwise truncated tag could pass verification. The fix requires the supplied tag length to exactly equal the MAC length and rejects a zero-length MAC, so a forged short or empty tag is no longer accepted.Show less

The ML-KEM ARM64 NEON ciphertext comparison only compares half of the input, breaking the Fujisaki-Okamoto transform's implicit rejection and weakening IND-CCA2 security on that code path. The constant-time comparison effectively ignored part of the re-encrypted ciphertext, so a decapsulating party could fail to detect a manipulated ciphertext and proceed without the standard's required implicit rejection.Show less

PKCS#12 MAC verification uses an attacker-controlled comparison length, weakening the integrity check on the MAC and allowing a mismatched MAC to be accepted. The PKCS#12 verify path compared the locally computed HMAC against the MAC parsed from the PKCS#12 structure using a length taken directly from the attacker-supplied input, without first verifying that it equals the length of the digest actually produced by the configured algorithm. A truncated or zero-length stored MAC could therefore be accepted, defeating the integrity protection of the MAC.Show less

TLS 1.3 post-handshake authentication (PHA) issue where a server could accept a client's Finished message without the client having sent a Certificate and CertificateVerify. The post-handshake-auth exemption that allows an empty/absent peer certificate was only intended for the initial handshake, but it was also being applied while a post-handshake CertificateRequest was still outstanding. The check is now scoped to the initial handshake only: on the server, once a post-handshake CertificateRequest has been sent (certReqCtx is set), a peer certificate and a valid CertificateVerify are required again before the Finished is accepted, with empty-certificate handling following the configured verify mode (FAIL_IF_NO_PEER_CERT) just as during first-handshake client authentication. Only affects TLS 1.3 servers built with post-handshake authentication support (WOLFSSL_POST_HANDSHAKE_AUTH / --enable-postauth, included in --enable-all) that enable WOLFSSL_VERIFY_POST_HANDSHAKE and request a client certificate after the handshake via wolfSSL_request_certificate(). Clients, and servers that do not use post-handshake authentication, are unaffected.Show less

Missing SNI/ALPN binding on stateful (session-ID) resumption, which previously skipped the binding check performed for ticket-based resumption. A cached session could be resumed under a different SNI/ALPN than originally negotiated and, where client-authentication policy differs across virtual hosts, carry the cached peer-authentication state into a context it was not established for. Resumption now verifies the SNI/ALPN binding for all paths and declines (falling back to a full handshake) on mismatch.Show less