Fl Mguard Rs4004 Tx/dtx Vpn Firmware

A low privileged remote attacker can perform configuration changes of the firewall services, including packet filter, packet forwarding, network access control or NAT through the FW_INCOMING.FROM_IP FW_INCOMING.IN_IP FW_OUTGOING.FROM_IP FW_OUTGOING.IN_IP FW_RULESETS.FROM_IP FW_RULESETS.IN_IP environment variable which can lead to a DoS.Show less

A low privileged remote attacker can perform configuration changes of the firewall services, including packet filter, packet forwarding, network access control or NAT through the FW_INCOMING.FROM_IP FW_INCOMING.IN_IP FW_OUTGOING.FROM_IP FW_OUTGOING.IN_IP environment variable which can lead to a DoS.Show less

A low privileged remote attacker can perform configuration changes of the firewall services, including packet filter, packet forwarding, network access control or NAT through the FW_PORTFORWARDING.SRC_IP environment variable which can lead to a DoS.Show less

An unauthenticated remote attacker can exploit the behavior of the pathfinder TCP encapsulation service by establishing a high number of TCP connections to the pathfinder TCP encapsulation service. The impact is limited to blocking of valid IPsec VPN peers.Show less

Improper Input Validation vulnerability in PHOENIX CONTACT FL/TC MGUARD Family in multiple versions may allow UDP packets to bypass the filter rules and access the solely connected device behind the MGUARD which can be used for flooding attacks.Show less

A remote, unauthenticated attacker could cause a denial-of-service of PHOENIX CONTACT FL MGUARD and TC MGUARD devices below version 8.9.0 by sending a larger number of unauthenticated HTTPS connections originating from different source IP’s. Configuring firewall limits for incoming connections cannot prevent the issue. Show less

On Phoenix Contact mGuard Devices versions before 8.8.3 LAN ports get functional after reboot even if they are disabled in the device configuration. For mGuard devices with integrated switch on the LAN side, single switch ports can be disabled by device configuration. After a reboot these ports get functional independent from their configuration setting: Missing Initialization of ResourceShow less