Linux Kernel

In the Linux kernel, the following vulnerability has been resolved: drm/amd: check num of link levels when update pcie param In SR-IOV environment, the value of pcie_table->num_of_link_levels will be 0, and num_of_levels - 1 will cause array index out of boundsShow less

In the Linux kernel, the following vulnerability has been resolved: scsi: ibmvfc: Remove BUG_ON in the case of an empty event pool In practice the driver should never send more commands than are allocated to a queue's event pool. In the unlikely event that this happens, the code asserts a BUG_ON, and in the case that the kernel is not configured to crash on panic returns a junk event pointer from the empty event list causing things to spiral from there. This BUG_ON is a historical artifact of the ibmvfc driver first being upstreamed, and it is well known now that the use of BUG_ON is bad practice except in the most unrecoverable scenario. There is nothing about this scenario that prevents the driver from recovering and carrying on. Remove the BUG_ON in question from ibmvfc_get_event() and return a NULL pointer in the case of an empty event pool. Update all call sites to ibmvfc_get_event() to check for a NULL pointer and perfrom the appropriate failure or recovery action.Show less

In the Linux kernel, the following vulnerability has been resolved: fs/jfs: Add check for negative db_l2nbperpage l2nbperpage is log2(number of blks per page), and the minimum legal value should be 0, not negative. In the case of l2nbperpage being negative, an error will occur when subsequently used as shift exponent. Syzbot reported this bug: UBSAN: shift-out-of-bounds in fs/jfs/jfs_dmap.c:799:12 shift exponent -16777216 is negativeShow less

In the Linux kernel, the following vulnerability has been resolved: scsi: libfc: Fix potential NULL pointer dereference in fc_lport_ptp_setup() fc_lport_ptp_setup() did not check the return value of fc_rport_create() which can return NULL and would cause a NULL pointer dereference. Address this issue by checking return value of fc_rport_create() and log error message on fc_rport_create() failed.Show less

In the Linux kernel, the following vulnerability has been resolved: scsi: hisi_sas: Set debugfs_dir pointer to NULL after removing debugfs If init debugfs failed during device registration due to memory allocation failure, debugfs_remove_recursive() is called, after which debugfs_dir is not set to NULL. debugfs_remove_recursive() will be called again during device removal. As a result, illegal pointer is accessed. [ 1665.467244] hisi_sas_v3_hw 0000:b4:02.0: failed to init debugfs! ... [ 1669.836708] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000a0 [ 1669.872669] pc : down_write+0x24/0x70 [ 1669.876315] lr : down_write+0x1c/0x70 [ 1669.879961] sp : ffff000036f53a30 [ 1669.883260] x29: ffff000036f53a30 x28: ffffa027c31549f8 [ 1669.888547] x27: ffffa027c3140000 x26: 0000000000000000 [ 1669.893834] x25: ffffa027bf37c270 x24: ffffa027bf37c270 [ 1669.899122] x23: ffff0000095406b8 x22: ffff0000095406a8 [ 1669.904408] x21: 0000000000000000 x20: ffffa027bf37c310 [ 1669.909695] x19: 00000000000000a0 x18: ffff8027dcd86f10 [ 1669.914982] x17: 0000000000000000 x16: 0000000000000000 [ 1669.920268] x15: 0000000000000000 x14: ffffa0274014f870 [ 1669.925555] x13: 0000000000000040 x12: 0000000000000228 [ 1669.930842] x11: 0000000000000020 x10: 0000000000000bb0 [ 1669.936129] x9 : ffff000036f537f0 x8 : ffff80273088ca10 [ 1669.941416] x7 : 000000000000001d x6 : 00000000ffffffff [ 1669.946702] x5 : ffff000008a36310 x4 : ffff80273088be00 [ 1669.951989] x3 : ffff000009513e90 x2 : 0000000000000000 [ 1669.957276] x1 : 00000000000000a0 x0 : ffffffff00000001 [ 1669.962563] Call trace: [ 1669.965000] down_write+0x24/0x70 [ 1669.968301] debugfs_remove_recursive+0x5c/0x1b0 [ 1669.972905] hisi_sas_debugfs_exit+0x24/0x30 [hisi_sas_main] [ 1669.978541] hisi_sas_v3_remove+0x130/0x150 [hisi_sas_v3_hw] [ 1669.984175] pci_device_remove+0x48/0xd8 [ 1669.988082] device_release_driver_internal+0x1b4/0x250 [ 1669.993282] device_release_driver+0x28/0x38 [ 1669.997534] pci_stop_bus_device+0x84/0xb8 [ 1670.001611] pci_stop_and_remove_bus_device_locked+0x24/0x40 [ 1670.007244] remove_store+0xfc/0x140 [ 1670.010802] dev_attr_store+0x44/0x60 [ 1670.014448] sysfs_kf_write+0x58/0x80 [ 1670.018095] kernfs_fop_write+0xe8/0x1f0 [ 1670.022000] __vfs_write+0x60/0x190 [ 1670.025472] vfs_write+0xac/0x1c0 [ 1670.028771] ksys_write+0x6c/0xd8 [ 1670.032071] __arm64_sys_write+0x24/0x30 [ 1670.035977] el0_svc_common+0x78/0x130 [ 1670.039710] el0_svc_handler+0x38/0x78 [ 1670.043442] el0_svc+0x8/0xc To fix this, set debugfs_dir to NULL after debugfs_remove_recursive().Show less

In the Linux kernel, the following vulnerability has been resolved: net: hns3: fix out-of-bounds access may occur when coalesce info is read via debugfs The hns3 driver define an array of string to show the coalesce info, but if the kernel adds a new mode or a new state, out-of-bounds access may occur when coalesce info is read via debugfs, this patch fix the problem.Show less

In the Linux kernel, the following vulnerability has been resolved: ALSA: hda: Fix possible null-ptr-deref when assigning a stream While AudioDSP drivers assign streams exclusively of HOST or LINK type, nothing blocks a user to attempt to assign a COUPLED stream. As supplied substream instance may be a stub, what is the case when code-loading, such scenario ends with null-ptr-deref.Show less

In the Linux kernel, the following vulnerability has been resolved: jfs: fix array-index-out-of-bounds in diAlloc Currently there is not check against the agno of the iag while allocating new inodes to avoid fragmentation problem. Added the check which is required.Show less

In the Linux kernel, the following vulnerability has been resolved: fs/jfs: Add validity check for db_maxag and db_agpref Both db_maxag and db_agpref are used as the index of the db_agfree array, but there is currently no validity check for db_maxag and db_agpref, which can lead to errors. The following is related bug reported by Syzbot: UBSAN: array-index-out-of-bounds in fs/jfs/jfs_dmap.c:639:20 index 7936 is out of range for type 'atomic_t[128]' Add checking that the values of db_maxag and db_agpref are valid indexes for the db_agfree array.Show less

In the Linux kernel, the following vulnerability has been resolved: SUNRPC: Fix RPC client cleaned up the freed pipefs dentries RPC client pipefs dentries cleanup is in separated rpc_remove_pipedir() workqueue,which takes care about pipefs superblock locking. In some special scenarios, when kernel frees the pipefs sb of the current client and immediately alloctes a new pipefs sb, rpc_remove_pipedir function would misjudge the existence of pipefs sb which is not the one it used to hold. As a result, the rpc_remove_pipedir would clean the released freed pipefs dentries. To fix this issue, rpc_remove_pipedir should check whether the current pipefs sb is consistent with the original pipefs sb. This error can be catched by KASAN: ========================================================= [ 250.497700] BUG: KASAN: slab-use-after-free in dget_parent+0x195/0x200 [ 250.498315] Read of size 4 at addr ffff88800a2ab804 by task kworker/0:18/106503 [ 250.500549] Workqueue: events rpc_free_client_work [ 250.501001] Call Trace: [ 250.502880] kasan_report+0xb6/0xf0 [ 250.503209] ? dget_parent+0x195/0x200 [ 250.503561] dget_parent+0x195/0x200 [ 250.503897] ? __pfx_rpc_clntdir_depopulate+0x10/0x10 [ 250.504384] rpc_rmdir_depopulate+0x1b/0x90 [ 250.504781] rpc_remove_client_dir+0xf5/0x150 [ 250.505195] rpc_free_client_work+0xe4/0x230 [ 250.505598] process_one_work+0x8ee/0x13b0 ... [ 22.039056] Allocated by task 244: [ 22.039390] kasan_save_stack+0x22/0x50 [ 22.039758] kasan_set_track+0x25/0x30 [ 22.040109] __kasan_slab_alloc+0x59/0x70 [ 22.040487] kmem_cache_alloc_lru+0xf0/0x240 [ 22.040889] __d_alloc+0x31/0x8e0 [ 22.041207] d_alloc+0x44/0x1f0 [ 22.041514] __rpc_lookup_create_exclusive+0x11c/0x140 [ 22.041987] rpc_mkdir_populate.constprop.0+0x5f/0x110 [ 22.042459] rpc_create_client_dir+0x34/0x150 [ 22.042874] rpc_setup_pipedir_sb+0x102/0x1c0 [ 22.043284] rpc_client_register+0x136/0x4e0 [ 22.043689] rpc_new_client+0x911/0x1020 [ 22.044057] rpc_create_xprt+0xcb/0x370 [ 22.044417] rpc_create+0x36b/0x6c0 ... [ 22.049524] Freed by task 0: [ 22.049803] kasan_save_stack+0x22/0x50 [ 22.050165] kasan_set_track+0x25/0x30 [ 22.050520] kasan_save_free_info+0x2b/0x50 [ 22.050921] __kasan_slab_free+0x10e/0x1a0 [ 22.051306] kmem_cache_free+0xa5/0x390 [ 22.051667] rcu_core+0x62c/0x1930 [ 22.051995] __do_softirq+0x165/0x52a [ 22.052347] [ 22.052503] Last potentially related work creation: [ 22.052952] kasan_save_stack+0x22/0x50 [ 22.053313] __kasan_record_aux_stack+0x8e/0xa0 [ 22.053739] __call_rcu_common.constprop.0+0x6b/0x8b0 [ 22.054209] dentry_free+0xb2/0x140 [ 22.054540] __dentry_kill+0x3be/0x540 [ 22.054900] shrink_dentry_list+0x199/0x510 [ 22.055293] shrink_dcache_parent+0x190/0x240 [ 22.055703] do_one_tree+0x11/0x40 [ 22.056028] shrink_dcache_for_umount+0x61/0x140 [ 22.056461] generic_shutdown_super+0x70/0x590 [ 22.056879] kill_anon_super+0x3a/0x60 [ 22.057234] rpc_kill_sb+0x121/0x200Show less

In the Linux kernel, the following vulnerability has been resolved: iommufd: Fix missing update of domains_itree after splitting iopt_area In iopt_area_split(), if the original iopt_area has filled a domain and is linked to domains_itree, pages_nodes have to be properly reinserted. Otherwise the domains_itree becomes corrupted and we will UAF.Show less

In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: fix htt pktlog locking The ath11k active pdevs are protected by RCU but the htt pktlog handling code calling ath11k_mac_get_ar_by_pdev_id() was not marked as a read-side critical section. Mark the code in question as an RCU read-side critical section to avoid any potential use-after-free issues. Compile tested only.Show less

In the Linux kernel, the following vulnerability has been resolved: jfs: fix array-index-out-of-bounds in dbFindLeaf Currently while searching for dmtree_t for sufficient free blocks there is an array out of bounds while getting element in tp->dm_stree. To add the required check for out of bound we first need to determine the type of dmtree. Thus added an extra parameter to dbFindLeaf so that the type of tree can be determined and the required check can be applied.Show less

In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: fix dfs radar event locking The ath11k active pdevs are protected by RCU but the DFS radar event handling code calling ath11k_mac_get_ar_by_pdev_id() was not marked as a read-side critical section. Mark the code in question as an RCU read-side critical section to avoid any potential use-after-free issues. Compile tested only.Show less

In the Linux kernel, the following vulnerability has been resolved: drivers: perf: Check find_first_bit() return value We must check the return value of find_first_bit() before using the return value as an index array since it happens to overflow the array and then panic: [ 107.318430] Kernel BUG [#1] [ 107.319434] CPU: 3 PID: 1238 Comm: kill Tainted: G E 6.6.0-rc6ubuntu-defconfig #2 [ 107.319465] Hardware name: riscv-virtio,qemu (DT) [ 107.319551] epc : pmu_sbi_ovf_handler+0x3a4/0x3ae [ 107.319840] ra : pmu_sbi_ovf_handler+0x52/0x3ae [ 107.319868] epc : ffffffff80a0a77c ra : ffffffff80a0a42a sp : ffffaf83fecda350 [ 107.319884] gp : ffffffff823961a8 tp : ffffaf8083db1dc0 t0 : ffffaf83fecda480 [ 107.319899] t1 : ffffffff80cafe62 t2 : 000000000000ff00 s0 : ffffaf83fecda520 [ 107.319921] s1 : ffffaf83fecda380 a0 : 00000018fca29df0 a1 : ffffffffffffffff [ 107.319936] a2 : 0000000001073734 a3 : 0000000000000004 a4 : 0000000000000000 [ 107.319951] a5 : 0000000000000040 a6 : 000000001d1c8774 a7 : 0000000000504d55 [ 107.319965] s2 : ffffffff82451f10 s3 : ffffffff82724e70 s4 : 000000000000003f [ 107.319980] s5 : 0000000000000011 s6 : ffffaf8083db27c0 s7 : 0000000000000000 [ 107.319995] s8 : 0000000000000001 s9 : 00007fffb45d6558 s10: 00007fffb45d81a0 [ 107.320009] s11: ffffaf7ffff60000 t3 : 0000000000000004 t4 : 0000000000000000 [ 107.320023] t5 : ffffaf7f80000000 t6 : ffffaf8000000000 [ 107.320037] status: 0000000200000100 badaddr: 0000000000000000 cause: 0000000000000003 [ 107.320081] [<ffffffff80a0a77c>] pmu_sbi_ovf_handler+0x3a4/0x3ae [ 107.320112] [<ffffffff800b42d0>] handle_percpu_devid_irq+0x9e/0x1a0 [ 107.320131] [<ffffffff800ad92c>] generic_handle_domain_irq+0x28/0x36 [ 107.320148] [<ffffffff8065f9f8>] riscv_intc_irq+0x36/0x4e [ 107.320166] [<ffffffff80caf4a0>] handle_riscv_irq+0x54/0x86 [ 107.320189] [<ffffffff80cb0036>] do_irq+0x64/0x96 [ 107.320271] Code: 85a6 855e b097 ff7f 80e7 9220 b709 9002 4501 bbd9 (9002) 6097 [ 107.320585] ---[ end trace 0000000000000000 ]--- [ 107.320704] Kernel panic - not syncing: Fatal exception in interrupt [ 107.320775] SMP: stopping secondary CPUs [ 107.321219] Kernel Offset: 0x0 from 0xffffffff80000000 [ 107.333051] ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]---Show less

In the Linux kernel, the following vulnerability has been resolved: ipvlan: add ipvlan_route_v6_outbound() helper Inspired by syzbot reports using a stack of multiple ipvlan devices. Reduce stack size needed in ipvlan_process_v6_outbound() by moving the flowi6 struct used for the route lookup in an non inlined helper. ipvlan_route_v6_outbound() needs 120 bytes on the stack, immediately reclaimed. Also make sure ipvlan_process_v4_outbound() is not inlined. We might also have to lower MAX_NEST_DEV, because only syzbot uses setups with more than four stacked devices. BUG: TASK stack guard page was hit at ffffc9000e803ff8 (stack is ffffc9000e804000..ffffc9000e808000) stack guard page: 0000 [#1] SMP KASAN CPU: 0 PID: 13442 Comm: syz-executor.4 Not tainted 6.1.52-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/09/2023 RIP: 0010:kasan_check_range+0x4/0x2a0 mm/kasan/generic.c:188 Code: 48 01 c6 48 89 c7 e8 db 4e c1 03 31 c0 5d c3 cc 0f 0b eb 02 0f 0b b8 ea ff ff ff 5d c3 cc 00 00 cc cc 00 00 cc cc 55 48 89 e5 <41> 57 41 56 41 55 41 54 53 b0 01 48 85 f6 0f 84 a4 01 00 00 48 89 RSP: 0018:ffffc9000e804000 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffff817e5bf2 RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffffffff887c6568 RBP: ffffc9000e804000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: dffffc0000000001 R12: 1ffff92001d0080c R13: dffffc0000000000 R14: ffffffff87e6b100 R15: 0000000000000000 FS: 00007fd0c55826c0(0000) GS:ffff8881f6800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffc9000e803ff8 CR3: 0000000170ef7000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <#DF> </#DF> <TASK> [<ffffffff81f281d1>] __kasan_check_read+0x11/0x20 mm/kasan/shadow.c:31 [<ffffffff817e5bf2>] instrument_atomic_read include/linux/instrumented.h:72 [inline] [<ffffffff817e5bf2>] _test_bit include/asm-generic/bitops/instrumented-non-atomic.h:141 [inline] [<ffffffff817e5bf2>] cpumask_test_cpu include/linux/cpumask.h:506 [inline] [<ffffffff817e5bf2>] cpu_online include/linux/cpumask.h:1092 [inline] [<ffffffff817e5bf2>] trace_lock_acquire include/trace/events/lock.h:24 [inline] [<ffffffff817e5bf2>] lock_acquire+0xe2/0x590 kernel/locking/lockdep.c:5632 [<ffffffff8563221e>] rcu_lock_acquire+0x2e/0x40 include/linux/rcupdate.h:306 [<ffffffff8561464d>] rcu_read_lock include/linux/rcupdate.h:747 [inline] [<ffffffff8561464d>] ip6_pol_route+0x15d/0x1440 net/ipv6/route.c:2221 [<ffffffff85618120>] ip6_pol_route_output+0x50/0x80 net/ipv6/route.c:2606 [<ffffffff856f65b5>] pol_lookup_func include/net/ip6_fib.h:584 [inline] [<ffffffff856f65b5>] fib6_rule_lookup+0x265/0x620 net/ipv6/fib6_rules.c:116 [<ffffffff85618009>] ip6_route_output_flags_noref+0x2d9/0x3a0 net/ipv6/route.c:2638 [<ffffffff8561821a>] ip6_route_output_flags+0xca/0x340 net/ipv6/route.c:2651 [<ffffffff838bd5a3>] ip6_route_output include/net/ip6_route.h:100 [inline] [<ffffffff838bd5a3>] ipvlan_process_v6_outbound drivers/net/ipvlan/ipvlan_core.c:473 [inline] [<ffffffff838bd5a3>] ipvlan_process_outbound drivers/net/ipvlan/ipvlan_core.c:529 [inline] [<ffffffff838bd5a3>] ipvlan_xmit_mode_l3 drivers/net/ipvlan/ipvlan_core.c:602 [inline] [<ffffffff838bd5a3>] ipvlan_queue_xmit+0xc33/0x1be0 drivers/net/ipvlan/ipvlan_core.c:677 [<ffffffff838c2909>] ipvlan_start_xmit+0x49/0x100 drivers/net/ipvlan/ipvlan_main.c:229 [<ffffffff84d03900>] netdev_start_xmit include/linux/netdevice.h:4966 [inline] [<ffffffff84d03900>] xmit_one net/core/dev.c:3644 [inline] [<ffffffff84d03900>] dev_hard_start_xmit+0x320/0x980 net/core/dev.c:3660 [<ffffffff84d080e2>] __dev_queue_xmit+0x16b2/0x3370 net/core/dev.c:4324 [<ffffffff855ce4cd>] dev_queue_xmit include/linux/netdevice.h:3067 [inline] [<ffffffff855ce4cd>] neigh_hh_output include/net/neighbour.h:529 [inline] [<f ---truncated---Show less

In the Linux kernel, the following vulnerability has been resolved: vhost-vdpa: fix use after free in vhost_vdpa_probe() The put_device() calls vhost_vdpa_release_dev() which calls ida_simple_remove() and frees "v". So this call to ida_simple_remove() is a use after free and a double free.Show less

In the Linux kernel, the following vulnerability has been resolved: thermal: intel: powerclamp: fix mismatch in get function for max_idle KASAN reported this [ 444.853098] BUG: KASAN: global-out-of-bounds in param_get_int+0x77/0x90 [ 444.853111] Read of size 4 at addr ffffffffc16c9220 by task cat/2105 ... [ 444.853442] The buggy address belongs to the variable: [ 444.853443] max_idle+0x0/0xffffffffffffcde0 [intel_powerclamp] There is a mismatch between the param_get_int and the definition of max_idle. Replacing param_get_int with param_get_byte resolves this issue.Show less

In the Linux kernel, the following vulnerability has been resolved: cxl/region: Do not try to cleanup after cxl_region_setup_targets() fails Commit 5e42bcbc3fef ("cxl/region: decrement ->nr_targets on error in cxl_region_attach()") tried to avoid 'eiw' initialization errors when ->nr_targets exceeded 16, by just decrementing ->nr_targets when cxl_region_setup_targets() failed. Commit 86987c766276 ("cxl/region: Cleanup target list on attach error") extended that cleanup to also clear cxled->pos and p->targets[pos]. The initialization error was incidentally fixed separately by: Commit 8d4285425714 ("cxl/region: Fix port setup uninitialized variable warnings") which was merged a few days after 5e42bcbc3fef. But now the original cleanup when cxl_region_setup_targets() fails prevents endpoint and switch decoder resources from being reused: 1) the cleanup does not set the decoder's region to NULL, which results in future dpa_size_store() calls returning -EBUSY 2) the decoder is not properly freed, which results in future commit errors associated with the upstream switch Now that the initialization errors were fixed separately, the proper cleanup for this case is to just return immediately. Then the resources associated with this target get cleanup up as normal when the failed region is deleted. The ->nr_targets decrement in the error case also helped prevent a p->targets[] array overflow, so add a new check to prevent against that overflow. Tested by trying to create an invalid region for a 2 switch * 2 endpoint topology, and then following up with creating a valid region.Show less

In the Linux kernel, the following vulnerability has been resolved: i2c: core: Run atomic i2c xfer when !preemptible Since bae1d3a05a8b, i2c transfers are non-atomic if preemption is disabled. However, non-atomic i2c transfers require preemption (e.g. in wait_for_completion() while waiting for the DMA). panic() calls preempt_disable_notrace() before calling emergency_restart(). Therefore, if an i2c device is used for the restart, the xfer should be atomic. This avoids warnings like: [ 12.667612] WARNING: CPU: 1 PID: 1 at kernel/rcu/tree_plugin.h:318 rcu_note_context_switch+0x33c/0x6b0 [ 12.676926] Voluntary context switch within RCU read-side critical section! ... [ 12.742376] schedule_timeout from wait_for_completion_timeout+0x90/0x114 [ 12.749179] wait_for_completion_timeout from tegra_i2c_wait_completion+0x40/0x70 ... [ 12.994527] atomic_notifier_call_chain from machine_restart+0x34/0x58 [ 13.001050] machine_restart from panic+0x2a8/0x32c Use !preemptible() instead, which is basically the same check as pre-v5.2.Show less