In the Linux kernel, the following vulnerability has been resolved:
RDMA/siw: Fix refcounting leak in siw_create_qp()
The atomic_inc() needs to be paired with an atomic_dec() on the error
path. |
In the Linux kernel, the following vulnerability has been resolved:
iommu/vt-d: Fix potential memory leak in intel_setup_irq_remapping()
After commit e3beca48a45b ("irqdomain/treewide: Keep firmware node
unconditionall...Show moreIn the Linux kernel, the following vulnerability has been resolved:
iommu/vt-d: Fix potential memory leak in intel_setup_irq_remapping()
After commit e3beca48a45b ("irqdomain/treewide: Keep firmware node
unconditionally allocated"). For tear down scenario, fn is only freed
after fail to allocate ir_domain, though it also should be freed in case
dmar_enable_qi returns error.
Besides free fn, irq_domain and ir_msi_domain need to be removed as well
if intel_setup_irq_remapping fails to enable queued invalidation.
Improve the rewinding path by add out_free_ir_domain and out_free_fwnode
lables per Baolu's suggestion.Show less |
In the Linux kernel, the following vulnerability has been resolved:
isdn: cpai: check ctr->cnr to avoid array index out of bound
The cmtp_add_connection() would add a cmtp session to a controller
and run a kernel threa...Show moreIn the Linux kernel, the following vulnerability has been resolved:
isdn: cpai: check ctr->cnr to avoid array index out of bound
The cmtp_add_connection() would add a cmtp session to a controller
and run a kernel thread to process cmtp.
__module_get(THIS_MODULE);
session->task = kthread_run(cmtp_session, session, "kcmtpd_ctr_%d",
session->num);
During this process, the kernel thread would call detach_capi_ctr()
to detach a register controller. if the controller
was not attached yet, detach_capi_ctr() would
trigger an array-index-out-bounds bug.
[ 46.866069][ T6479] UBSAN: array-index-out-of-bounds in
drivers/isdn/capi/kcapi.c:483:21
[ 46.867196][ T6479] index -1 is out of range for type 'capi_ctr *[32]'
[ 46.867982][ T6479] CPU: 1 PID: 6479 Comm: kcmtpd_ctr_0 Not tainted
5.15.0-rc2+ #8
[ 46.869002][ T6479] Hardware name: QEMU Standard PC (i440FX + PIIX,
1996), BIOS 1.14.0-2 04/01/2014
[ 46.870107][ T6479] Call Trace:
[ 46.870473][ T6479] dump_stack_lvl+0x57/0x7d
[ 46.870974][ T6479] ubsan_epilogue+0x5/0x40
[ 46.871458][ T6479] __ubsan_handle_out_of_bounds.cold+0x43/0x48
[ 46.872135][ T6479] detach_capi_ctr+0x64/0xc0
[ 46.872639][ T6479] cmtp_session+0x5c8/0x5d0
[ 46.873131][ T6479] ? __init_waitqueue_head+0x60/0x60
[ 46.873712][ T6479] ? cmtp_add_msgpart+0x120/0x120
[ 46.874256][ T6479] kthread+0x147/0x170
[ 46.874709][ T6479] ? set_kthread_struct+0x40/0x40
[ 46.875248][ T6479] ret_from_fork+0x1f/0x30
[ 46.875773][ T6479]Show less |
In the Linux kernel, the following vulnerability has been resolved:
spi: uniphier: fix reference count leak in uniphier_spi_probe()
The issue happens in several error paths in uniphier_spi_probe().
When either dma_get_...Show moreIn the Linux kernel, the following vulnerability has been resolved:
spi: uniphier: fix reference count leak in uniphier_spi_probe()
The issue happens in several error paths in uniphier_spi_probe().
When either dma_get_slave_caps() or devm_spi_register_master() returns
an error code, the function forgets to decrease the refcount of both
`dma_rx` and `dma_tx` objects, which may lead to refcount leaks.
Fix it by decrementing the reference count of specific objects in
those error paths.Show less |
In the Linux kernel, the following vulnerability has been resolved:
net: ieee802154: ca8210: Stop leaking skb's
Upon error the ieee802154_xmit_complete() helper is not called. Only
ieee802154_wake_queue() is called man...Show moreIn the Linux kernel, the following vulnerability has been resolved:
net: ieee802154: ca8210: Stop leaking skb's
Upon error the ieee802154_xmit_complete() helper is not called. Only
ieee802154_wake_queue() is called manually. We then leak the skb
structure.
Free the skb structure upon error before returning.Show less |
In the Linux kernel, the following vulnerability has been resolved:
net/smc: Forward wakeup to smc socket waitqueue after fallback
When we replace TCP with SMC and a fallback occurs, there may be
some socket waitqueue...Show moreIn the Linux kernel, the following vulnerability has been resolved:
net/smc: Forward wakeup to smc socket waitqueue after fallback
When we replace TCP with SMC and a fallback occurs, there may be
some socket waitqueue entries remaining in smc socket->wq, such
as eppoll_entries inserted by userspace applications.
After the fallback, data flows over TCP/IP and only clcsocket->wq
will be woken up. Applications can't be notified by the entries
which were inserted in smc socket->wq before fallback. So we need
a mechanism to wake up smc socket->wq at the same time if some
entries remaining in it.
The current workaround is to transfer the entries from smc socket->wq
to clcsock->wq during the fallback. But this may cause a crash
like this:
general protection fault, probably for non-canonical address 0xdead000000000100: 0000 [#1] PREEMPT SMP PTI
CPU: 3 PID: 0 Comm: swapper/3 Kdump: loaded Tainted: G E 5.16.0+ #107
RIP: 0010:__wake_up_common+0x65/0x170
Call Trace:
<IRQ>
__wake_up_common_lock+0x7a/0xc0
sock_def_readable+0x3c/0x70
tcp_data_queue+0x4a7/0xc40
tcp_rcv_established+0x32f/0x660
? sk_filter_trim_cap+0xcb/0x2e0
tcp_v4_do_rcv+0x10b/0x260
tcp_v4_rcv+0xd2a/0xde0
ip_protocol_deliver_rcu+0x3b/0x1d0
ip_local_deliver_finish+0x54/0x60
ip_local_deliver+0x6a/0x110
? tcp_v4_early_demux+0xa2/0x140
? tcp_v4_early_demux+0x10d/0x140
ip_sublist_rcv_finish+0x49/0x60
ip_sublist_rcv+0x19d/0x230
ip_list_rcv+0x13e/0x170
__netif_receive_skb_list_core+0x1c2/0x240
netif_receive_skb_list_internal+0x1e6/0x320
napi_complete_done+0x11d/0x190
mlx5e_napi_poll+0x163/0x6b0 [mlx5_core]
__napi_poll+0x3c/0x1b0
net_rx_action+0x27c/0x300
__do_softirq+0x114/0x2d2
irq_exit_rcu+0xb4/0xe0
common_interrupt+0xba/0xe0
</IRQ>
<TASK>
The crash is caused by privately transferring waitqueue entries from
smc socket->wq to clcsock->wq. The owners of these entries, such as
epoll, have no idea that the entries have been transferred to a
different socket wait queue and still use original waitqueue spinlock
(smc socket->wq.wait.lock) to make the entries operation exclusive,
but it doesn't work. The operations to the entries, such as removing
from the waitqueue (now is clcsock->wq after fallback), may cause a
crash when clcsock waitqueue is being iterated over at the moment.
This patch tries to fix this by no longer transferring wait queue
entries privately, but introducing own implementations of clcsock's
callback functions in fallback situation. The callback functions will
forward the wakeup to smc socket->wq if clcsock->wq is actually woken
up and smc socket->wq has remaining entries.Show less |
In the Linux kernel, the following vulnerability has been resolved:
net: macsec: Fix offload support for NETDEV_UNREGISTER event
Current macsec netdev notify handler handles NETDEV_UNREGISTER event by
releasing relevan...Show moreIn the Linux kernel, the following vulnerability has been resolved:
net: macsec: Fix offload support for NETDEV_UNREGISTER event
Current macsec netdev notify handler handles NETDEV_UNREGISTER event by
releasing relevant SW resources only, this causes resources leak in case
of macsec HW offload, as the underlay driver was not notified to clean
it's macsec offload resources.
Fix by calling the underlay driver to clean it's relevant resources
by moving offload handling from macsec_dellink() to macsec_common_dellink()
when handling NETDEV_UNREGISTER event.Show less |
In the Linux kernel, the following vulnerability has been resolved:
net, neigh: Do not trigger immediate probes on NUD_FAILED from neigh_managed_work
syzkaller was able to trigger a deadlock for NTF_MANAGED entries [0]...Show moreIn the Linux kernel, the following vulnerability has been resolved:
net, neigh: Do not trigger immediate probes on NUD_FAILED from neigh_managed_work
syzkaller was able to trigger a deadlock for NTF_MANAGED entries [0]:
kworker/0:16/14617 is trying to acquire lock:
ffffffff8d4dd370 (&tbl->lock){++-.}-{2:2}, at: ___neigh_create+0x9e1/0x2990 net/core/neighbour.c:652
[...]
but task is already holding lock:
ffffffff8d4dd370 (&tbl->lock){++-.}-{2:2}, at: neigh_managed_work+0x35/0x250 net/core/neighbour.c:1572
The neighbor entry turned to NUD_FAILED state, where __neigh_event_send()
triggered an immediate probe as per commit cd28ca0a3dd1 ("neigh: reduce
arp latency") via neigh_probe() given table lock was held.
One option to fix this situation is to defer the neigh_probe() back to
the neigh_timer_handler() similarly as pre cd28ca0a3dd1. For the case
of NTF_MANAGED, this deferral is acceptable given this only happens on
actual failure state and regular / expected state is NUD_VALID with the
entry already present.
The fix adds a parameter to __neigh_event_send() in order to communicate
whether immediate probe is allowed or disallowed. Existing call-sites
of neigh_event_send() default as-is to immediate probe. However, the
neigh_managed_work() disables it via use of neigh_event_send_probe().
[0] <TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
print_deadlock_bug kernel/locking/lockdep.c:2956 [inline]
check_deadlock kernel/locking/lockdep.c:2999 [inline]
validate_chain kernel/locking/lockdep.c:3788 [inline]
__lock_acquire.cold+0x149/0x3ab kernel/locking/lockdep.c:5027
lock_acquire kernel/locking/lockdep.c:5639 [inline]
lock_acquire+0x1ab/0x510 kernel/locking/lockdep.c:5604
__raw_write_lock_bh include/linux/rwlock_api_smp.h:202 [inline]
_raw_write_lock_bh+0x2f/0x40 kernel/locking/spinlock.c:334
___neigh_create+0x9e1/0x2990 net/core/neighbour.c:652
ip6_finish_output2+0x1070/0x14f0 net/ipv6/ip6_output.c:123
__ip6_finish_output net/ipv6/ip6_output.c:191 [inline]
__ip6_finish_output+0x61e/0xe90 net/ipv6/ip6_output.c:170
ip6_finish_output+0x32/0x200 net/ipv6/ip6_output.c:201
NF_HOOK_COND include/linux/netfilter.h:296 [inline]
ip6_output+0x1e4/0x530 net/ipv6/ip6_output.c:224
dst_output include/net/dst.h:451 [inline]
NF_HOOK include/linux/netfilter.h:307 [inline]
ndisc_send_skb+0xa99/0x17f0 net/ipv6/ndisc.c:508
ndisc_send_ns+0x3a9/0x840 net/ipv6/ndisc.c:650
ndisc_solicit+0x2cd/0x4f0 net/ipv6/ndisc.c:742
neigh_probe+0xc2/0x110 net/core/neighbour.c:1040
__neigh_event_send+0x37d/0x1570 net/core/neighbour.c:1201
neigh_event_send include/net/neighbour.h:470 [inline]
neigh_managed_work+0x162/0x250 net/core/neighbour.c:1574
process_one_work+0x9ac/0x1650 kernel/workqueue.c:2307
worker_thread+0x657/0x1110 kernel/workqueue.c:2454
kthread+0x2e9/0x3a0 kernel/kthread.c:377
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295
</TASK>Show less |
In the Linux kernel, the following vulnerability has been resolved:
drm: mxsfb: Fix NULL pointer dereference
mxsfb should not ever dereference the NULL pointer which
drm_atomic_get_new_bridge_state is allowed to return...Show moreIn the Linux kernel, the following vulnerability has been resolved:
drm: mxsfb: Fix NULL pointer dereference
mxsfb should not ever dereference the NULL pointer which
drm_atomic_get_new_bridge_state is allowed to return.
Assume a fixed format instead.Show less |
In the Linux kernel, the following vulnerability has been resolved:
ASoC: max9759: fix underflow in speaker_gain_control_put()
Check for negative values of "priv->gain" to prevent an out of bounds
access. The concern...Show moreIn the Linux kernel, the following vulnerability has been resolved:
ASoC: max9759: fix underflow in speaker_gain_control_put()
Check for negative values of "priv->gain" to prevent an out of bounds
access. The concern is that these might come from the user via:
-> snd_ctl_elem_write_user()
-> snd_ctl_elem_write()
-> kctl->put()Show less |
In the Linux kernel, the following vulnerability has been resolved:
ASoC: codecs: wcd938x: fix incorrect used of portid
Mixer controls have the channel id in mixer->reg, which is not same
as port id. port id should be...Show moreIn the Linux kernel, the following vulnerability has been resolved:
ASoC: codecs: wcd938x: fix incorrect used of portid
Mixer controls have the channel id in mixer->reg, which is not same
as port id. port id should be derived from chan_info array.
So fix this. Without this, its possible that we could corrupt
struct wcd938x_sdw_priv by accessing port_map array out of range
with channel id instead of port id.Show less |
In the Linux kernel, the following vulnerability has been resolved:
scsi: bnx2fc: Make bnx2fc_recv_frame() mp safe
Running tests with a debug kernel shows that bnx2fc_recv_frame() is
modifying the per_cpu lport stats c...Show moreIn the Linux kernel, the following vulnerability has been resolved:
scsi: bnx2fc: Make bnx2fc_recv_frame() mp safe
Running tests with a debug kernel shows that bnx2fc_recv_frame() is
modifying the per_cpu lport stats counters in a non-mpsafe way. Just boot
a debug kernel and run the bnx2fc driver with the hardware enabled.
[ 1391.699147] BUG: using smp_processor_id() in preemptible [00000000] code: bnx2fc_
[ 1391.699160] caller is bnx2fc_recv_frame+0xbf9/0x1760 [bnx2fc]
[ 1391.699174] CPU: 2 PID: 4355 Comm: bnx2fc_l2_threa Kdump: loaded Tainted: G B
[ 1391.699180] Hardware name: HP ProLiant DL120 G7, BIOS J01 07/01/2013
[ 1391.699183] Call Trace:
[ 1391.699188] dump_stack_lvl+0x57/0x7d
[ 1391.699198] check_preemption_disabled+0xc8/0xd0
[ 1391.699205] bnx2fc_recv_frame+0xbf9/0x1760 [bnx2fc]
[ 1391.699215] ? do_raw_spin_trylock+0xb5/0x180
[ 1391.699221] ? bnx2fc_npiv_create_vports.isra.0+0x4e0/0x4e0 [bnx2fc]
[ 1391.699229] ? bnx2fc_l2_rcv_thread+0xb7/0x3a0 [bnx2fc]
[ 1391.699240] bnx2fc_l2_rcv_thread+0x1af/0x3a0 [bnx2fc]
[ 1391.699250] ? bnx2fc_ulp_init+0xc0/0xc0 [bnx2fc]
[ 1391.699258] kthread+0x364/0x420
[ 1391.699263] ? _raw_spin_unlock_irq+0x24/0x50
[ 1391.699268] ? set_kthread_struct+0x100/0x100
[ 1391.699273] ret_from_fork+0x22/0x30
Restore the old get_cpu/put_cpu code with some modifications to reduce the
size of the critical section.Show less |
In the Linux kernel, the following vulnerability has been resolved:
bpf: Use VM_MAP instead of VM_ALLOC for ringbuf
After commit 2fd3fb0be1d1 ("kasan, vmalloc: unpoison VM_ALLOC pages
after mapping"), non-VM_ALLOC mapp...Show moreIn the Linux kernel, the following vulnerability has been resolved:
bpf: Use VM_MAP instead of VM_ALLOC for ringbuf
After commit 2fd3fb0be1d1 ("kasan, vmalloc: unpoison VM_ALLOC pages
after mapping"), non-VM_ALLOC mappings will be marked as accessible
in __get_vm_area_node() when KASAN is enabled. But now the flag for
ringbuf area is VM_ALLOC, so KASAN will complain out-of-bound access
after vmap() returns. Because the ringbuf area is created by mapping
allocated pages, so use VM_MAP instead.
After the change, info in /proc/vmallocinfo also changes from
[start]-[end] 24576 ringbuf_map_alloc+0x171/0x290 vmalloc user
to
[start]-[end] 24576 ringbuf_map_alloc+0x171/0x290 vmap userShow less |
In the Linux kernel, the following vulnerability has been resolved:
perf/x86/intel/pt: Fix crash with stop filters in single-range mode
Add a check for !buf->single before calling pt_buffer_region_size in a
place where...Show moreIn the Linux kernel, the following vulnerability has been resolved:
perf/x86/intel/pt: Fix crash with stop filters in single-range mode
Add a check for !buf->single before calling pt_buffer_region_size in a
place where a missing check can cause a kernel crash.
Fixes a bug introduced by commit 670638477aed ("perf/x86/intel/pt:
Opportunistically use single range output mode"), which added a
support for PT single-range output mode. Since that commit if a PT
stop filter range is hit while tracing, the kernel will crash because
of a null pointer dereference in pt_handle_status due to calling
pt_buffer_region_size without a ToPA configured.
The commit which introduced single-range mode guarded almost all uses of
the ToPA buffer variables with checks of the buf->single variable, but
missed the case where tracing was stopped by the PT hardware, which
happens when execution hits a configured stop filter.
Tested that hitting a stop filter while PT recording successfully
records a trace with this patch but crashes without this patch.Show less |
In the Linux kernel, the following vulnerability has been resolved:
ext4: fix error handling in ext4_fc_record_modified_inode()
Current code does not fully takes care of krealloc() error case, which
could lead to silen...Show moreIn the Linux kernel, the following vulnerability has been resolved:
ext4: fix error handling in ext4_fc_record_modified_inode()
Current code does not fully takes care of krealloc() error case, which
could lead to silent memory corruption or a kernel bug. This patch
fixes that.
Also it cleans up some duplicated error handling logic from various
functions in fast_commit.c file.Show less |
In the Linux kernel, the following vulnerability has been resolved:
tipc: improve size validations for received domain records
The function tipc_mon_rcv() allows a node to receive and process
domain_record structs from...Show moreIn the Linux kernel, the following vulnerability has been resolved:
tipc: improve size validations for received domain records
The function tipc_mon_rcv() allows a node to receive and process
domain_record structs from peer nodes to track their views of the
network topology.
This patch verifies that the number of members in a received domain
record does not exceed the limit defined by MAX_MON_DOMAIN, something
that may otherwise lead to a stack overflow.
tipc_mon_rcv() is called from the function tipc_link_proto_rcv(), where
we are reading a 32 bit message data length field into a uint16. To
avert any risk of bit overflow, we add an extra sanity check for this in
that function. We cannot see that happen with the current code, but
future designers being unaware of this risk, may introduce it by
allowing delivery of very large (> 64k) sk buffers from the bearer
layer. This potential problem was identified by Eric Dumazet.
This fixes CVE-2022-0435Show less |
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: refactor malicious adv data check
Check for out-of-bound read was being performed at the end of while
num_reports loop, and would fill jour...Show moreIn the Linux kernel, the following vulnerability has been resolved:
Bluetooth: refactor malicious adv data check
Check for out-of-bound read was being performed at the end of while
num_reports loop, and would fill journal with false positives. Added
check to beginning of loop processing so that it doesn't get checked
after ptr has been advanced.Show less |
In the Linux kernel, the following vulnerability has been resolved:
i40e: Fix queues reservation for XDP
When XDP was configured on a system with large number of CPUs
and X722 NIC there was a call trace with NULL point...Show moreIn the Linux kernel, the following vulnerability has been resolved:
i40e: Fix queues reservation for XDP
When XDP was configured on a system with large number of CPUs
and X722 NIC there was a call trace with NULL pointer dereference.
i40e 0000:87:00.0: failed to get tracking for 256 queues for VSI 0 err -12
i40e 0000:87:00.0: setup of MAIN VSI failed
BUG: kernel NULL pointer dereference, address: 0000000000000000
RIP: 0010:i40e_xdp+0xea/0x1b0 [i40e]
Call Trace:
? i40e_reconfig_rss_queues+0x130/0x130 [i40e]
dev_xdp_install+0x61/0xe0
dev_xdp_attach+0x18a/0x4c0
dev_change_xdp_fd+0x1e6/0x220
do_setlink+0x616/0x1030
? ahci_port_stop+0x80/0x80
? ata_qc_issue+0x107/0x1e0
? lock_timer_base+0x61/0x80
? __mod_timer+0x202/0x380
rtnl_setlink+0xe5/0x170
? bpf_lsm_binder_transaction+0x10/0x10
? security_capable+0x36/0x50
rtnetlink_rcv_msg+0x121/0x350
? rtnl_calcit.isra.0+0x100/0x100
netlink_rcv_skb+0x50/0xf0
netlink_unicast+0x1d3/0x2a0
netlink_sendmsg+0x22a/0x440
sock_sendmsg+0x5e/0x60
__sys_sendto+0xf0/0x160
? __sys_getsockname+0x7e/0xc0
? _copy_from_user+0x3c/0x80
? __sys_setsockopt+0xc8/0x1a0
__x64_sys_sendto+0x20/0x30
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f83fa7a39e0
This was caused by PF queue pile fragmentation due to
flow director VSI queue being placed right after main VSI.
Because of this main VSI was not able to resize its
queue allocation for XDP resulting in no queues allocated
for main VSI when XDP was turned on.
Fix this by always allocating last queue in PF queue pile
for a flow director VSI.Show less |
In the Linux kernel, the following vulnerability has been resolved:
ARM: 9170/1: fix panic when kasan and kprobe are enabled
arm32 uses software to simulate the instruction replaced
by kprobe. some instructions may be...Show moreIn the Linux kernel, the following vulnerability has been resolved:
ARM: 9170/1: fix panic when kasan and kprobe are enabled
arm32 uses software to simulate the instruction replaced
by kprobe. some instructions may be simulated by constructing
assembly functions. therefore, before executing instruction
simulation, it is necessary to construct assembly function
execution environment in C language through binding registers.
after kasan is enabled, the register binding relationship will
be destroyed, resulting in instruction simulation errors and
causing kernel panic.
the kprobe emulate instruction function is distributed in three
files: actions-common.c actions-arm.c actions-thumb.c, so disable
KASAN when compiling these files.
for example, use kprobe insert on cap_capable+20 after kasan
enabled, the cap_capable assembly code is as follows:
<cap_capable>:
e92d47f0 push {r4, r5, r6, r7, r8, r9, sl, lr}
e1a05000 mov r5, r0
e280006c add r0, r0, #108 ; 0x6c
e1a04001 mov r4, r1
e1a06002 mov r6, r2
e59fa090 ldr sl, [pc, #144] ;
ebfc7bf8 bl c03aa4b4 <__asan_load4>
e595706c ldr r7, [r5, #108] ; 0x6c
e2859014 add r9, r5, #20
......
The emulate_ldr assembly code after enabling kasan is as follows:
c06f1384 <emulate_ldr>:
e92d47f0 push {r4, r5, r6, r7, r8, r9, sl, lr}
e282803c add r8, r2, #60 ; 0x3c
e1a05000 mov r5, r0
e7e37855 ubfx r7, r5, #16, #4
e1a00008 mov r0, r8
e1a09001 mov r9, r1
e1a04002 mov r4, r2
ebf35462 bl c03c6530 <__asan_load4>
e357000f cmp r7, #15
e7e36655 ubfx r6, r5, #12, #4
e205a00f and sl, r5, #15
0a000001 beq c06f13bc <emulate_ldr+0x38>
e0840107 add r0, r4, r7, lsl #2
ebf3545c bl c03c6530 <__asan_load4>
e084010a add r0, r4, sl, lsl #2
ebf3545a bl c03c6530 <__asan_load4>
e2890010 add r0, r9, #16
ebf35458 bl c03c6530 <__asan_load4>
e5990010 ldr r0, [r9, #16]
e12fff30 blx r0
e356000f cm r6, #15
1a000014 bne c06f1430 <emulate_ldr+0xac>
e1a06000 mov r6, r0
e2840040 add r0, r4, #64 ; 0x40
......
when running in emulate_ldr to simulate the ldr instruction, panic
occurred, and the log is as follows:
Unable to handle kernel NULL pointer dereference at virtual address
00000090
pgd = ecb46400
[00000090] *pgd=2e0fa003, *pmd=00000000
Internal error: Oops: 206 [#1] SMP ARM
PC is at cap_capable+0x14/0xb0
LR is at emulate_ldr+0x50/0xc0
psr: 600d0293 sp : ecd63af8 ip : 00000004 fp : c0a7c30c
r10: 00000000 r9 : c30897f4 r8 : ecd63cd4
r7 : 0000000f r6 : 0000000a r5 : e59fa090 r4 : ecd63c98
r3 : c06ae294 r2 : 00000000 r1 : b7611300 r0 : bf4ec008
Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user
Control: 32c5387d Table: 2d546400 DAC: 55555555
Process bash (pid: 1643, stack limit = 0xecd60190)
(cap_capable) from (kprobe_handler+0x218/0x340)
(kprobe_handler) from (kprobe_trap_handler+0x24/0x48)
(kprobe_trap_handler) from (do_undefinstr+0x13c/0x364)
(do_undefinstr) from (__und_svc_finish+0x0/0x30)
(__und_svc_finish) from (cap_capable+0x18/0xb0)
(cap_capable) from (cap_vm_enough_memory+0x38/0x48)
(cap_vm_enough_memory) from
(security_vm_enough_memory_mm+0x48/0x6c)
(security_vm_enough_memory_mm) from
(copy_process.constprop.5+0x16b4/0x25c8)
(copy_process.constprop.5) from (_do_fork+0xe8/0x55c)
(_do_fork) from (SyS_clone+0x1c/0x24)
(SyS_clone) from (__sys_trace_return+0x0/0x10)
Code: 0050a0e1 6c0080e2 0140a0e1 0260a0e1 (f801f0e7)Show less |
In the Linux kernel, the following vulnerability has been resolved:
PCI: pciehp: Fix infinite loop in IRQ handler upon power fault
The Power Fault Detected bit in the Slot Status register differs from
all other hotplug...Show moreIn the Linux kernel, the following vulnerability has been resolved:
PCI: pciehp: Fix infinite loop in IRQ handler upon power fault
The Power Fault Detected bit in the Slot Status register differs from
all other hotplug events in that it is sticky: It can only be cleared
after turning off slot power. Per PCIe r5.0, sec. 6.7.1.8:
If a power controller detects a main power fault on the hot-plug slot,
it must automatically set its internal main power fault latch [...].
The main power fault latch is cleared when software turns off power to
the hot-plug slot.
The stickiness used to cause interrupt storms and infinite loops which
were fixed in 2009 by commits 5651c48cfafe ("PCI pciehp: fix power fault
interrupt storm problem") and 99f0169c17f3 ("PCI: pciehp: enable
software notification on empty slots").
Unfortunately in 2020 the infinite loop issue was inadvertently
reintroduced by commit 8edf5332c393 ("PCI: pciehp: Fix MSI interrupt
race"): The hardirq handler pciehp_isr() clears the PFD bit until
pciehp's power_fault_detected flag is set. That happens in the IRQ
thread pciehp_ist(), which never learns of the event because the hardirq
handler is stuck in an infinite loop. Fix by setting the
power_fault_detected flag already in the hardirq handler.Show less |