Linux Kernel

In the Linux kernel, the following vulnerability has been resolved: tap: add missing verification for short frame The cited commit missed to check against the validity of the frame length in the tap_get_user_xdp() path, which could cause a corrupted skb to be sent downstack. Even before the skb is transmitted, the tap_get_user_xdp()-->skb_set_network_header() may assume the size is more than ETH_HLEN. Once transmitted, this could either cause out-of-bound access beyond the actual length, or confuse the underlayer with incorrect or inconsistent header length in the skb metadata. In the alternative path, tap_get_user() already prohibits short frame which has the length less than Ethernet header size from being transmitted. This is to drop any frame shorter than the Ethernet header size just like how tap_get_user() does. CVE: CVE-2024-41090Show less

In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: Validate ff offset This adds sanity checks for ff offset. There is a check on rt->first_free at first, but walking through by ff without any check. If the second ff is a large offset. We may encounter an out-of-bound read.Show less

In the Linux kernel, the following vulnerability has been resolved: ocfs2: strict bound check before memcmp in ocfs2_xattr_find_entry() xattr in ocfs2 maybe 'non-indexed', which saved with additional space requested. It's better to check if the memory is out of bound before memcmp, although this possibility mainly comes from crafted poisonous images.Show less

In the Linux kernel, the following vulnerability has been resolved: ocfs2: add bounds checking to ocfs2_check_dir_entry() This adds sanity checks for ocfs2_dir_entry to make sure all members of ocfs2_dir_entry don't stray beyond valid memory region.Show less

In the Linux kernel, the following vulnerability has been resolved: xfs: add bounds checking to xlog_recover_process_data There is a lack of verification of the space occupied by fixed members of xlog_op_header in the xlog_recover_process_data. We can create a crafted image to trigger an out of bounds read by following these steps: 1) Mount an image of xfs, and do some file operations to leave records 2) Before umounting, copy the image for subsequent steps to simulate abnormal exit. Because umount will ensure that tail_blk and head_blk are the same, which will result in the inability to enter xlog_recover_process_data 3) Write a tool to parse and modify the copied image in step 2 4) Make the end of the xlog_op_header entries only 1 byte away from xlog_rec_header->h_size 5) xlog_rec_header->h_num_logops++ 6) Modify xlog_rec_header->h_crc Fix: Add a check to make sure there is sufficient space to access fixed members of xlog_op_header.Show less

In the Linux kernel, the following vulnerability has been resolved: xfs: don't walk off the end of a directory data block This adds sanity checks for xfs_dir2_data_unused and xfs_dir2_data_entry to make sure don't stray beyond valid memory region. Before patching, the loop simply checks that the start offset of the dup and dep is within the range. So in a crafted image, if last entry is xfs_dir2_data_unused, we can change dup->length to dup->length-1 and leave 1 byte of space. In the next traversal, this space will be considered as dup or dep. We may encounter an out of bound read when accessing the fixed members. In the patch, we make sure that the remaining bytes large enough to hold an unused entry before accessing xfs_dir2_data_unused and xfs_dir2_data_unused is XFS_DIR2_DATA_ALIGN byte aligned. We also make sure that the remaining bytes large enough to hold a dirent with a single-byte name before accessing xfs_dir2_data_entry.Show less

In the Linux kernel, the following vulnerability has been resolved: filelock: Remove locks reliably when fcntl/close race is detected When fcntl_setlk() races with close(), it removes the created lock with do_lock_file_wait(). However, LSMs can allow the first do_lock_file_wait() that created the lock while denying the second do_lock_file_wait() that tries to remove the lock. Separately, posix_lock_file() could also fail to remove a lock due to GFP_KERNEL allocation failure (when splitting a range in the middle). After the bug has been triggered, use-after-free reads will occur in lock_get_status() when userspace reads /proc/locks. This can likely be used to read arbitrary kernel memory, but can't corrupt kernel memory. Fix it by calling locks_remove_posix() instead, which is designed to reliably get rid of POSIX locks associated with the given file and files_struct and is also used by filp_flush().Show less

In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: don't allow mapping the MMIO HDP page with large pages We don't get the right offset in that case. The GPU has an unused 4K area of the register BAR space into which you can remap registers. We remap the HDP flush registers into this space to allow userspace (CPU or GPU) to flush the HDP when it updates VRAM. However, on systems with >4K pages, we end up exposing PAGE_SIZE of MMIO space.Show less

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix too early release of tcx_entry Pedro Pinto and later independently also Hyunwoo Kim and Wongi Lee reported an issue that the tcx_entry can be released too early leading to a use after free (UAF) when an active old-style ingress or clsact qdisc with a shared tc block is later replaced by another ingress or clsact instance. Essentially, the sequence to trigger the UAF (one example) can be as follows: 1. A network namespace is created 2. An ingress qdisc is created. This allocates a tcx_entry, and &tcx_entry->miniq is stored in the qdisc's miniqp->p_miniq. At the same time, a tcf block with index 1 is created. 3. chain0 is attached to the tcf block. chain0 must be connected to the block linked to the ingress qdisc to later reach the function tcf_chain0_head_change_cb_del() which triggers the UAF. 4. Create and graft a clsact qdisc. This causes the ingress qdisc created in step 1 to be removed, thus freeing the previously linked tcx_entry: rtnetlink_rcv_msg() => tc_modify_qdisc() => qdisc_create() => clsact_init() [a] => qdisc_graft() => qdisc_destroy() => __qdisc_destroy() => ingress_destroy() [b] => tcx_entry_free() => kfree_rcu() // tcx_entry freed 5. Finally, the network namespace is closed. This registers the cleanup_net worker, and during the process of releasing the remaining clsact qdisc, it accesses the tcx_entry that was already freed in step 4, causing the UAF to occur: cleanup_net() => ops_exit_list() => default_device_exit_batch() => unregister_netdevice_many() => unregister_netdevice_many_notify() => dev_shutdown() => qdisc_put() => clsact_destroy() [c] => tcf_block_put_ext() => tcf_chain0_head_change_cb_del() => tcf_chain_head_change_item() => clsact_chain_head_change() => mini_qdisc_pair_swap() // UAF There are also other variants, the gist is to add an ingress (or clsact) qdisc with a specific shared block, then to replace that qdisc, waiting for the tcx_entry kfree_rcu() to be executed and subsequently accessing the current active qdisc's miniq one way or another. The correct fix is to turn the miniq_active boolean into a counter. What can be observed, at step 2 above, the counter transitions from 0->1, at step [a] from 1->2 (in order for the miniq object to remain active during the replacement), then in [b] from 2->1 and finally [c] 1->0 with the eventual release. The reference counter in general ranges from [0,2] and it does not need to be atomic since all access to the counter is protected by the rtnl mutex. With this in place, there is no longer a UAF happening and the tcx_entry is freed at the correct time.Show less

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix overrunning reservations in ringbuf The BPF ring buffer internally is implemented as a power-of-2 sized circular buffer, with two logical and ever-increasing counters: consumer_pos is the consumer counter to show which logical position the consumer consumed the data, and producer_pos which is the producer counter denoting the amount of data reserved by all producers. Each time a record is reserved, the producer that "owns" the record will successfully advance producer counter. In user space each time a record is read, the consumer of the data advanced the consumer counter once it finished processing. Both counters are stored in separate pages so that from user space, the producer counter is read-only and the consumer counter is read-write. One aspect that simplifies and thus speeds up the implementation of both producers and consumers is how the data area is mapped twice contiguously back-to-back in the virtual memory, allowing to not take any special measures for samples that have to wrap around at the end of the circular buffer data area, because the next page after the last data page would be first data page again, and thus the sample will still appear completely contiguous in virtual memory. Each record has a struct bpf_ringbuf_hdr { u32 len; u32 pg_off; } header for book-keeping the length and offset, and is inaccessible to the BPF program. Helpers like bpf_ringbuf_reserve() return `(void *)hdr + BPF_RINGBUF_HDR_SZ` for the BPF program to use. Bing-Jhong and Muhammad reported that it is however possible to make a second allocated memory chunk overlapping with the first chunk and as a result, the BPF program is now able to edit first chunk's header. For example, consider the creation of a BPF_MAP_TYPE_RINGBUF map with size of 0x4000. Next, the consumer_pos is modified to 0x3000 /before/ a call to bpf_ringbuf_reserve() is made. This will allocate a chunk A, which is in [0x0,0x3008], and the BPF program is able to edit [0x8,0x3008]. Now, lets allocate a chunk B with size 0x3000. This will succeed because consumer_pos was edited ahead of time to pass the `new_prod_pos - cons_pos > rb->mask` check. Chunk B will be in range [0x3008,0x6010], and the BPF program is able to edit [0x3010,0x6010]. Due to the ring buffer memory layout mentioned earlier, the ranges [0x0,0x4000] and [0x4000,0x8000] point to the same data pages. This means that chunk B at [0x4000,0x4008] is chunk A's header. bpf_ringbuf_submit() / bpf_ringbuf_discard() use the header's pg_off to then locate the bpf_ringbuf itself via bpf_ringbuf_restore_from_rec(). Once chunk B modified chunk A's header, then bpf_ringbuf_commit() refers to the wrong page and could cause a crash. Fix it by calculating the oldest pending_pos and check whether the range from the oldest outstanding record to the newest would span beyond the ring buffer size. If that is the case, then reject the request. We've tested with the ring buffer benchmark in BPF selftests (./benchs/run_bench_ringbufs.sh) before/after the fix and while it seems a bit slower on some benchmarks, it is still not significantly enough to matter.Show less

In the Linux kernel, the following vulnerability has been resolved: HID: hid-thrustmaster: fix OOB read in thrustmaster_interrupts Syzbot reported an slab-out-of-bounds Read in thrustmaster_probe() bug. The root case is in missing validation check of actual number of endpoints. Code should not blindly access usb_host_interface::endpoint array, since it may contain less endpoints than code expects. Fix it by adding missing validaion check and print an error if number of endpoints do not match expected numberShow less

In the Linux kernel, the following vulnerability has been resolved: tipc: fix kernel panic when enabling bearer When enabling a bearer on a node, a kernel panic is observed: [ 4.498085] RIP: 0010:tipc_mon_prep+0x4e/0x130 [tipc] ... [ 4.520030] Call Trace: [ 4.520689] <IRQ> [ 4.521236] tipc_link_build_proto_msg+0x375/0x750 [tipc] [ 4.522654] tipc_link_build_state_msg+0x48/0xc0 [tipc] [ 4.524034] __tipc_node_link_up+0xd7/0x290 [tipc] [ 4.525292] tipc_rcv+0x5da/0x730 [tipc] [ 4.526346] ? __netif_receive_skb_core+0xb7/0xfc0 [ 4.527601] tipc_l2_rcv_msg+0x5e/0x90 [tipc] [ 4.528737] __netif_receive_skb_list_core+0x20b/0x260 [ 4.530068] netif_receive_skb_list_internal+0x1bf/0x2e0 [ 4.531450] ? dev_gro_receive+0x4c2/0x680 [ 4.532512] napi_complete_done+0x6f/0x180 [ 4.533570] virtnet_poll+0x29c/0x42e [virtio_net] ... The node in question is receiving activate messages in another thread after changing bearer status to allow message sending/ receiving in current thread: thread 1 | thread 2 -------- | -------- | tipc_enable_bearer() | test_and_set_bit_lock() | tipc_bearer_xmit_skb() | | tipc_l2_rcv_msg() | tipc_rcv() | __tipc_node_link_up() | tipc_link_build_state_msg() | tipc_link_build_proto_msg() | tipc_mon_prep() | { | ... | // null-pointer dereference | u16 gen = mon->dom_gen; | ... | } // Not being executed yet | tipc_mon_create() | { | ... | // allocate | mon = kzalloc(); | ... | } | Monitoring pointer in thread 2 is dereferenced before monitoring data is allocated in thread 1. This causes kernel panic. This commit fixes it by allocating the monitoring data before enabling the bearer to receive messages.Show less

In the Linux kernel, the following vulnerability has been resolved: vdpa/mlx5: add validation for VIRTIO_NET_CTRL_MQ_VQ_PAIRS_SET command When control vq receives a VIRTIO_NET_CTRL_MQ_VQ_PAIRS_SET command request from the driver, presently there is no validation against the number of queue pairs to configure, or even if multiqueue had been negotiated or not is unverified. This may lead to kernel panic due to uninitialized resource for the queues were there any bogus request sent down by untrusted driver. Tie up the loose ends there.Show less

In the Linux kernel, the following vulnerability has been resolved: mISDN: Fix memory leak in dsp_pipeline_build() dsp_pipeline_build() allocates dup pointer by kstrdup(cfg), but then it updates dup variable by strsep(&dup, "|"). As a result when it calls kfree(dup), the dup variable contains NULL. Found by Linux Driver Verification project (linuxtesting.org) with SVACE.Show less

In the Linux kernel, the following vulnerability has been resolved: vhost: fix hung thread due to erroneous iotlb entries In vhost_iotlb_add_range_ctx(), range size can overflow to 0 when start is 0 and last is ULONG_MAX. One instance where it can happen is when userspace sends an IOTLB message with iova=size=uaddr=0 (vhost_process_iotlb_msg). So, an entry with size = 0, start = 0, last = ULONG_MAX ends up in the iotlb. Next time a packet is sent, iotlb_access_ok() loops indefinitely due to that erroneous entry. Call Trace: <TASK> iotlb_access_ok+0x21b/0x3e0 drivers/vhost/vhost.c:1340 vq_meta_prefetch+0xbc/0x280 drivers/vhost/vhost.c:1366 vhost_transport_do_send_pkt+0xe0/0xfd0 drivers/vhost/vsock.c:104 vhost_worker+0x23d/0x3d0 drivers/vhost/vhost.c:372 kthread+0x2e9/0x3a0 kernel/kthread.c:377 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295 </TASK> Reported by syzbot at: https://syzkaller.appspot.com/bug?extid=0abd373e2e50d704db87 To fix this, do two things: 1. Return -EINVAL in vhost_chr_write_iter() when userspace asks to map a range with size 0. 2. Fix vhost_iotlb_add_range_ctx() to handle the range [0, ULONG_MAX] by splitting it into two entries.Show less

In the Linux kernel, the following vulnerability has been resolved: vdpa: fix use-after-free on vp_vdpa_remove When vp_vdpa driver is unbind, vp_vdpa is freed in vdpa_unregister_device and then vp_vdpa->mdev.pci_dev is dereferenced in vp_modern_remove, triggering use-after-free. Call Trace of unbinding driver free vp_vdpa : do_syscall_64 vfs_write kernfs_fop_write_iter device_release_driver_internal pci_device_remove vp_vdpa_remove vdpa_unregister_device kobject_release device_release kfree Call Trace of dereference vp_vdpa->mdev.pci_dev: vp_modern_remove pci_release_selected_regions pci_release_region pci_resource_len pci_resource_end (dev)->resource[(bar)].endShow less

In the Linux kernel, the following vulnerability has been resolved: ethernet: Fix error handling in xemaclite_of_probe This node pointer is returned by of_parse_phandle() with refcount incremented in this function. Calling of_node_put() to avoid the refcount leak. As the remove function do.Show less

In the Linux kernel, the following vulnerability has been resolved: net: marvell: prestera: Add missing of_node_put() in prestera_switch_set_base_mac_addr This node pointer is returned by of_find_compatible_node() with refcount incremented. Calling of_node_put() to aovid the refcount leak.Show less