Linux Kernel

In the Linux kernel, the following vulnerability has been resolved: md/raid5: avoid BUG_ON() while continue reshape after reassembling Currently, mdadm support --revert-reshape to abort the reshape while reassembling, as the test 07revert-grow. However, following BUG_ON() can be triggerred by the test: kernel BUG at drivers/md/raid5.c:6278! invalid opcode: 0000 [#1] PREEMPT SMP PTI irq event stamp: 158985 CPU: 6 PID: 891 Comm: md0_reshape Not tainted 6.9.0-03335-g7592a0b0049a #94 RIP: 0010:reshape_request+0x3f1/0xe60 Call Trace: <TASK> raid5_sync_request+0x43d/0x550 md_do_sync+0xb7a/0x2110 md_thread+0x294/0x2b0 kthread+0x147/0x1c0 ret_from_fork+0x59/0x70 ret_from_fork_asm+0x1a/0x30 </TASK> Root cause is that --revert-reshape update the raid_disks from 5 to 4, while reshape position is still set, and after reassembling the array, reshape position will be read from super block, then during reshape the checking of 'writepos' that is caculated by old reshape position will fail. Fix this panic the easy way first, by converting the BUG_ON() to WARN_ON(), and stop the reshape if checkings fail. Noted that mdadm must fix --revert-shape as well, and probably md/raid should enhance metadata validation as well, however this means reassemble will fail and there must be user tools to fix the wrong metadata.Show less

In the Linux kernel, the following vulnerability has been resolved: nvme: apple: fix device reference counting Drivers must call nvme_uninit_ctrl after a successful nvme_init_ctrl. Split the allocation side out to make the error handling boundary easier to navigate. The apple driver had been doing this wrong, leaking the controller device memory on a tagset failure.Show less

In the Linux kernel, the following vulnerability has been resolved: wifi: nl80211: disallow setting special AP channel widths Setting the AP channel width is meant for use with the normal 20/40/... MHz channel width progression, and switching around in S1G or narrow channels isn't supported. Disallow that.Show less

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: fix NULL dereference at band check in starting tx ba session In MLD connection, link_data/link_conf are dynamically allocated. They don't point to vif->bss_conf. So, there will be no chanreq assigned to vif->bss_conf and then the chan will be NULL. Tweak the code to check ht_supported/vht_supported/has_he/has_eht on sta deflink. Crash log (with rtw89 version under MLO development): [ 9890.526087] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 9890.526102] #PF: supervisor read access in kernel mode [ 9890.526105] #PF: error_code(0x0000) - not-present page [ 9890.526109] PGD 0 P4D 0 [ 9890.526114] Oops: 0000 [#1] PREEMPT SMP PTI [ 9890.526119] CPU: 2 PID: 6367 Comm: kworker/u16:2 Kdump: loaded Tainted: G OE 6.9.0 #1 [ 9890.526123] Hardware name: LENOVO 2356AD1/2356AD1, BIOS G7ETB3WW (2.73 ) 11/28/2018 [ 9890.526126] Workqueue: phy2 rtw89_core_ba_work [rtw89_core] [ 9890.526203] RIP: 0010:ieee80211_start_tx_ba_session (net/mac80211/agg-tx.c:618 (discriminator 1)) mac80211 [ 9890.526279] Code: f7 e8 d5 93 3e ea 48 83 c4 28 89 d8 5b 41 5c 41 5d 41 5e 41 5f 5d c3 cc cc cc cc 49 8b 84 24 e0 f1 ff ff 48 8b 80 90 1b 00 00 <83> 38 03 0f 84 37 fe ff ff bb ea ff ff ff eb cc 49 8b 84 24 10 f3 All code ======== 0: f7 e8 imul %eax 2: d5 (bad) 3: 93 xchg %eax,%ebx 4: 3e ea ds (bad) 6: 48 83 c4 28 add $0x28,%rsp a: 89 d8 mov %ebx,%eax c: 5b pop %rbx d: 41 5c pop %r12 f: 41 5d pop %r13 11: 41 5e pop %r14 13: 41 5f pop %r15 15: 5d pop %rbp 16: c3 retq 17: cc int3 18: cc int3 19: cc int3 1a: cc int3 1b: 49 8b 84 24 e0 f1 ff mov -0xe20(%r12),%rax 22: ff 23: 48 8b 80 90 1b 00 00 mov 0x1b90(%rax),%rax 2a:* 83 38 03 cmpl $0x3,(%rax) <-- trapping instruction 2d: 0f 84 37 fe ff ff je 0xfffffffffffffe6a 33: bb ea ff ff ff mov $0xffffffea,%ebx 38: eb cc jmp 0x6 3a: 49 rex.WB 3b: 8b .byte 0x8b 3c: 84 24 10 test %ah,(%rax,%rdx,1) 3f: f3 repz Code starting with the faulting instruction =========================================== 0: 83 38 03 cmpl $0x3,(%rax) 3: 0f 84 37 fe ff ff je 0xfffffffffffffe40 9: bb ea ff ff ff mov $0xffffffea,%ebx e: eb cc jmp 0xffffffffffffffdc 10: 49 rex.WB 11: 8b .byte 0x8b 12: 84 24 10 test %ah,(%rax,%rdx,1) 15: f3 repz [ 9890.526285] RSP: 0018:ffffb8db09013d68 EFLAGS: 00010246 [ 9890.526291] RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffff9308e0d656c8 [ 9890.526295] RDX: 0000000000000000 RSI: ffffffffab99460b RDI: ffffffffab9a7685 [ 9890.526300] RBP: ffffb8db09013db8 R08: 0000000000000000 R09: 0000000000000873 [ 9890.526304] R10: ffff9308e0d64800 R11: 0000000000000002 R12: ffff9308e5ff6e70 [ 9890.526308] R13: ffff930952500e20 R14: ffff9309192a8c00 R15: 0000000000000000 [ 9890.526313] FS: 0000000000000000(0000) GS:ffff930b4e700000(0000) knlGS:0000000000000000 [ 9890.526316] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 9890.526318] CR2: 0000000000000000 CR3: 0000000391c58005 CR4: 00000000001706f0 [ 9890.526321] Call Trace: [ 9890.526324] <TASK> [ 9890.526327] ? show_regs (arch/x86/kernel/dumpstack.c:479) [ 9890.526335] ? __die (arch/x86/kernel/dumpstack.c:421 arch/x86/kernel/dumpstack.c:434) [ 9890.526340] ? page_fault_oops (arch/x86/mm/fault.c:713) [ 9890.526347] ? search_module_extables (kernel/module/main.c:3256 (discriminator ---truncated---Show less

In the Linux kernel, the following vulnerability has been resolved: bpf: add missing check_func_arg_reg_off() to prevent out-of-bounds memory accesses Currently, it's possible to pass in a modified CONST_PTR_TO_DYNPTR to a global function as an argument. The adverse effects of this is that BPF helpers can continue to make use of this modified CONST_PTR_TO_DYNPTR from within the context of the global function, which can unintentionally result in out-of-bounds memory accesses and therefore compromise overall system stability i.e. [ 244.157771] BUG: KASAN: slab-out-of-bounds in bpf_dynptr_data+0x137/0x140 [ 244.161345] Read of size 8 at addr ffff88810914be68 by task test_progs/302 [ 244.167151] CPU: 0 PID: 302 Comm: test_progs Tainted: G O E 6.10.0-rc3-00131-g66b586715063 #533 [ 244.174318] Call Trace: [ 244.175787] <TASK> [ 244.177356] dump_stack_lvl+0x66/0xa0 [ 244.179531] print_report+0xce/0x670 [ 244.182314] ? __virt_addr_valid+0x200/0x3e0 [ 244.184908] kasan_report+0xd7/0x110 [ 244.187408] ? bpf_dynptr_data+0x137/0x140 [ 244.189714] ? bpf_dynptr_data+0x137/0x140 [ 244.192020] bpf_dynptr_data+0x137/0x140 [ 244.194264] bpf_prog_b02a02fdd2bdc5fa_global_call_bpf_dynptr_data+0x22/0x26 [ 244.198044] bpf_prog_b0fe7b9d7dc3abde_callback_adjust_bpf_dynptr_reg_off+0x1f/0x23 [ 244.202136] bpf_user_ringbuf_drain+0x2c7/0x570 [ 244.204744] ? 0xffffffffc0009e58 [ 244.206593] ? __pfx_bpf_user_ringbuf_drain+0x10/0x10 [ 244.209795] bpf_prog_33ab33f6a804ba2d_user_ringbuf_callback_const_ptr_to_dynptr_reg_off+0x47/0x4b [ 244.215922] bpf_trampoline_6442502480+0x43/0xe3 [ 244.218691] __x64_sys_prlimit64+0x9/0xf0 [ 244.220912] do_syscall_64+0xc1/0x1d0 [ 244.223043] entry_SYSCALL_64_after_hwframe+0x77/0x7f [ 244.226458] RIP: 0033:0x7ffa3eb8f059 [ 244.228582] Code: 08 89 e8 5b 5d c3 66 2e 0f 1f 84 00 00 00 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 8f 1d 0d 00 f7 d8 64 89 01 48 [ 244.241307] RSP: 002b:00007ffa3e9c6eb8 EFLAGS: 00000206 ORIG_RAX: 000000000000012e [ 244.246474] RAX: ffffffffffffffda RBX: 00007ffa3e9c7cdc RCX: 00007ffa3eb8f059 [ 244.250478] RDX: 00007ffa3eb162b4 RSI: 0000000000000000 RDI: 00007ffa3e9c7fb0 [ 244.255396] RBP: 00007ffa3e9c6ed0 R08: 00007ffa3e9c76c0 R09: 0000000000000000 [ 244.260195] R10: 0000000000000000 R11: 0000000000000206 R12: ffffffffffffff80 [ 244.264201] R13: 000000000000001c R14: 00007ffc5d6b4260 R15: 00007ffa3e1c7000 [ 244.268303] </TASK> Add a check_func_arg_reg_off() to the path in which the BPF verifier verifies the arguments of global function arguments, specifically those which take an argument of type ARG_PTR_TO_DYNPTR | MEM_RDONLY. Also, process_dynptr_func() doesn't appear to perform any explicit and strict type matching on the supplied register type, so let's also enforce that a register either type PTR_TO_STACK or CONST_PTR_TO_DYNPTR is by the caller.Show less

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/pm: Fix the null pointer dereference for smu7 optimize the code to avoid pass a null pointer (hwmgr->backend) to function smu7_update_edc_leakage_table.Show less

In the Linux kernel, the following vulnerability has been resolved: drm/admgpu: fix dereferencing null pointer context When user space sets an invalid ta type, the pointer context will be empty. So it need to check the pointer context before using itShow less

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Add null checks for 'stream' and 'plane' before dereferencing This commit adds null checks for the 'stream' and 'plane' variables in the dcn30_apply_idle_power_optimizations function. These variables were previously assumed to be null at line 922, but they were used later in the code without checking if they were null. This could potentially lead to a null pointer dereference, which would cause a crash. The null checks ensure that 'stream' and 'plane' are not null before they are used, preventing potential crashes. Fixes the below static smatch checker: drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn30/dcn30_hwseq.c:938 dcn30_apply_idle_power_optimizations() error: we previously assumed 'stream' could be null (see line 922) drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn30/dcn30_hwseq.c:940 dcn30_apply_idle_power_optimizations() error: we previously assumed 'plane' could be null (see line 922)Show less

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Add null checker before passing variables Checks null pointer before passing variables to functions. This fixes 3 NULL_RETURNS issues reported by Coverity.Show less

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix NULL pointer dereference for DTN log in DCN401 When users run the command: cat /sys/kernel/debug/dri/0/amdgpu_dm_dtn_log The following NULL pointer dereference happens: [ +0.000003] BUG: kernel NULL pointer dereference, address: NULL [ +0.000005] #PF: supervisor instruction fetch in kernel mode [ +0.000002] #PF: error_code(0x0010) - not-present page [ +0.000002] PGD 0 P4D 0 [ +0.000004] Oops: 0010 [#1] PREEMPT SMP NOPTI [ +0.000003] RIP: 0010:0x0 [ +0.000008] Code: Unable to access opcode bytes at 0xffffffffffffffd6. [...] [ +0.000002] PKRU: 55555554 [ +0.000002] Call Trace: [ +0.000002] <TASK> [ +0.000003] ? show_regs+0x65/0x70 [ +0.000006] ? __die+0x24/0x70 [ +0.000004] ? page_fault_oops+0x160/0x470 [ +0.000006] ? do_user_addr_fault+0x2b5/0x690 [ +0.000003] ? prb_read_valid+0x1c/0x30 [ +0.000005] ? exc_page_fault+0x8c/0x1a0 [ +0.000005] ? asm_exc_page_fault+0x27/0x30 [ +0.000012] dcn10_log_color_state+0xf9/0x510 [amdgpu] [ +0.000306] ? srso_alias_return_thunk+0x5/0xfbef5 [ +0.000003] ? vsnprintf+0x2fb/0x600 [ +0.000009] dcn10_log_hw_state+0xfd0/0xfe0 [amdgpu] [ +0.000218] ? __mod_memcg_lruvec_state+0xe8/0x170 [ +0.000008] ? srso_alias_return_thunk+0x5/0xfbef5 [ +0.000002] ? debug_smp_processor_id+0x17/0x20 [ +0.000003] ? srso_alias_return_thunk+0x5/0xfbef5 [ +0.000002] ? srso_alias_return_thunk+0x5/0xfbef5 [ +0.000002] ? set_ptes.isra.0+0x2b/0x90 [ +0.000004] ? srso_alias_return_thunk+0x5/0xfbef5 [ +0.000002] ? _raw_spin_unlock+0x19/0x40 [ +0.000004] ? srso_alias_return_thunk+0x5/0xfbef5 [ +0.000002] ? do_anonymous_page+0x337/0x700 [ +0.000004] dtn_log_read+0x82/0x120 [amdgpu] [ +0.000207] full_proxy_read+0x66/0x90 [ +0.000007] vfs_read+0xb0/0x340 [ +0.000005] ? __count_memcg_events+0x79/0xe0 [ +0.000002] ? srso_alias_return_thunk+0x5/0xfbef5 [ +0.000003] ? count_memcg_events.constprop.0+0x1e/0x40 [ +0.000003] ? handle_mm_fault+0xb2/0x370 [ +0.000003] ksys_read+0x6b/0xf0 [ +0.000004] __x64_sys_read+0x19/0x20 [ +0.000003] do_syscall_64+0x60/0x130 [ +0.000004] entry_SYSCALL_64_after_hwframe+0x6e/0x76 [ +0.000003] RIP: 0033:0x7fdf32f147e2 [...] This error happens when the color log tries to read the gamut remap information from DCN401 which is not initialized in the dcn401_dpp_funcs which leads to a null pointer dereference. This commit addresses this issue by adding a proper guard to access the gamut_remap callback in case the specific ASIC did not implement this function.Show less

In the Linux kernel, the following vulnerability has been resolved: media: xc2028: avoid use-after-free in load_firmware_cb() syzkaller reported use-after-free in load_firmware_cb() [1]. The reason is because the module allocated a struct tuner in tuner_probe(), and then the module initialization failed, the struct tuner was released. A worker which created during module initialization accesses this struct tuner later, it caused use-after-free. The process is as follows: task-6504 worker_thread tuner_probe <= alloc dvb_frontend [2] ... request_firmware_nowait <= create a worker ... tuner_remove <= free dvb_frontend ... request_firmware_work_func <= the firmware is ready load_firmware_cb <= but now the dvb_frontend has been freed To fix the issue, check the dvd_frontend in load_firmware_cb(), if it is null, report a warning and just return. [1]: ================================================================== BUG: KASAN: use-after-free in load_firmware_cb+0x1310/0x17a0 Read of size 8 at addr ffff8000d7ca2308 by task kworker/2:3/6504 Call trace: load_firmware_cb+0x1310/0x17a0 request_firmware_work_func+0x128/0x220 process_one_work+0x770/0x1824 worker_thread+0x488/0xea0 kthread+0x300/0x430 ret_from_fork+0x10/0x20 Allocated by task 6504: kzalloc tuner_probe+0xb0/0x1430 i2c_device_probe+0x92c/0xaf0 really_probe+0x678/0xcd0 driver_probe_device+0x280/0x370 __device_attach_driver+0x220/0x330 bus_for_each_drv+0x134/0x1c0 __device_attach+0x1f4/0x410 device_initial_probe+0x20/0x30 bus_probe_device+0x184/0x200 device_add+0x924/0x12c0 device_register+0x24/0x30 i2c_new_device+0x4e0/0xc44 v4l2_i2c_new_subdev_board+0xbc/0x290 v4l2_i2c_new_subdev+0xc8/0x104 em28xx_v4l2_init+0x1dd0/0x3770 Freed by task 6504: kfree+0x238/0x4e4 tuner_remove+0x144/0x1c0 i2c_device_remove+0xc8/0x290 __device_release_driver+0x314/0x5fc device_release_driver+0x30/0x44 bus_remove_device+0x244/0x490 device_del+0x350/0x900 device_unregister+0x28/0xd0 i2c_unregister_device+0x174/0x1d0 v4l2_device_unregister+0x224/0x380 em28xx_v4l2_init+0x1d90/0x3770 The buggy address belongs to the object at ffff8000d7ca2000 which belongs to the cache kmalloc-2k of size 2048 The buggy address is located 776 bytes inside of 2048-byte region [ffff8000d7ca2000, ffff8000d7ca2800) The buggy address belongs to the page: page:ffff7fe00035f280 count:1 mapcount:0 mapping:ffff8000c001f000 index:0x0 flags: 0x7ff800000000100(slab) raw: 07ff800000000100 ffff7fe00049d880 0000000300000003 ffff8000c001f000 raw: 0000000000000000 0000000080100010 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8000d7ca2200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8000d7ca2280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8000d7ca2300: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8000d7ca2380: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8000d7ca2400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== [2] Actually, it is allocated for struct tuner, and dvb_frontend is inside.Show less

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix null pointer deref in dcn20_resource.c Fixes a hang thats triggered when MPV is run on a DCN401 dGPU: mpv --hwdec=vaapi --vo=gpu --hwdec-codecs=all and then enabling fullscreen playback (double click on the video) The following calltrace will be seen: [ 181.843989] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 181.843997] #PF: supervisor instruction fetch in kernel mode [ 181.844003] #PF: error_code(0x0010) - not-present page [ 181.844009] PGD 0 P4D 0 [ 181.844020] Oops: 0010 [#1] PREEMPT SMP NOPTI [ 181.844028] CPU: 6 PID: 1892 Comm: gnome-shell Tainted: G W OE 6.5.0-41-generic #41~22.04.2-Ubuntu [ 181.844038] Hardware name: System manufacturer System Product Name/CROSSHAIR VI HERO, BIOS 6302 10/23/2018 [ 181.844044] RIP: 0010:0x0 [ 181.844079] Code: Unable to access opcode bytes at 0xffffffffffffffd6. [ 181.844084] RSP: 0018:ffffb593c2b8f7b0 EFLAGS: 00010246 [ 181.844093] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000004 [ 181.844099] RDX: ffffb593c2b8f804 RSI: ffffb593c2b8f7e0 RDI: ffff9e3c8e758400 [ 181.844105] RBP: ffffb593c2b8f7b8 R08: ffffb593c2b8f9c8 R09: ffffb593c2b8f96c [ 181.844110] R10: 0000000000000000 R11: 0000000000000000 R12: ffffb593c2b8f9c8 [ 181.844115] R13: 0000000000000001 R14: ffff9e3c88000000 R15: 0000000000000005 [ 181.844121] FS: 00007c6e323bb5c0(0000) GS:ffff9e3f85f80000(0000) knlGS:0000000000000000 [ 181.844128] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 181.844134] CR2: ffffffffffffffd6 CR3: 0000000140fbe000 CR4: 00000000003506e0 [ 181.844141] Call Trace: [ 181.844146] <TASK> [ 181.844153] ? show_regs+0x6d/0x80 [ 181.844167] ? __die+0x24/0x80 [ 181.844179] ? page_fault_oops+0x99/0x1b0 [ 181.844192] ? do_user_addr_fault+0x31d/0x6b0 [ 181.844204] ? exc_page_fault+0x83/0x1b0 [ 181.844216] ? asm_exc_page_fault+0x27/0x30 [ 181.844237] dcn20_get_dcc_compression_cap+0x23/0x30 [amdgpu] [ 181.845115] amdgpu_dm_plane_validate_dcc.constprop.0+0xe5/0x180 [amdgpu] [ 181.845985] amdgpu_dm_plane_fill_plane_buffer_attributes+0x300/0x580 [amdgpu] [ 181.846848] fill_dc_plane_info_and_addr+0x258/0x350 [amdgpu] [ 181.847734] fill_dc_plane_attributes+0x162/0x350 [amdgpu] [ 181.848748] dm_update_plane_state.constprop.0+0x4e3/0x6b0 [amdgpu] [ 181.849791] ? dm_update_plane_state.constprop.0+0x4e3/0x6b0 [amdgpu] [ 181.850840] amdgpu_dm_atomic_check+0xdfe/0x1760 [amdgpu]Show less

In the Linux kernel, the following vulnerability has been resolved: net: drop bad gso csum_start and offset in virtio_net_hdr Tighten csum_start and csum_offset checks in virtio_net_hdr_to_skb for GSO packets. The function already checks that a checksum requested with VIRTIO_NET_HDR_F_NEEDS_CSUM is in skb linear. But for GSO packets this might not hold for segs after segmentation. Syzkaller demonstrated to reach this warning in skb_checksum_help offset = skb_checksum_start_offset(skb); ret = -EINVAL; if (WARN_ON_ONCE(offset >= skb_headlen(skb))) By injecting a TSO packet: WARNING: CPU: 1 PID: 3539 at net/core/dev.c:3284 skb_checksum_help+0x3d0/0x5b0 ip_do_fragment+0x209/0x1b20 net/ipv4/ip_output.c:774 ip_finish_output_gso net/ipv4/ip_output.c:279 [inline] __ip_finish_output+0x2bd/0x4b0 net/ipv4/ip_output.c:301 iptunnel_xmit+0x50c/0x930 net/ipv4/ip_tunnel_core.c:82 ip_tunnel_xmit+0x2296/0x2c70 net/ipv4/ip_tunnel.c:813 __gre_xmit net/ipv4/ip_gre.c:469 [inline] ipgre_xmit+0x759/0xa60 net/ipv4/ip_gre.c:661 __netdev_start_xmit include/linux/netdevice.h:4850 [inline] netdev_start_xmit include/linux/netdevice.h:4864 [inline] xmit_one net/core/dev.c:3595 [inline] dev_hard_start_xmit+0x261/0x8c0 net/core/dev.c:3611 __dev_queue_xmit+0x1b97/0x3c90 net/core/dev.c:4261 packet_snd net/packet/af_packet.c:3073 [inline] The geometry of the bad input packet at tcp_gso_segment: [ 52.003050][ T8403] skb len=12202 headroom=244 headlen=12093 tailroom=0 [ 52.003050][ T8403] mac=(168,24) mac_len=24 net=(192,52) trans=244 [ 52.003050][ T8403] shinfo(txflags=0 nr_frags=1 gso(size=1552 type=3 segs=0)) [ 52.003050][ T8403] csum(0x60000c7 start=199 offset=1536 ip_summed=3 complete_sw=0 valid=0 level=0) Mitigate with stricter input validation. csum_offset: for GSO packets, deduce the correct value from gso_type. This is already done for USO. Extend it to TSO. Let UFO be: udp[46]_ufo_fragment ignores these fields and always computes the checksum in software. csum_start: finding the real offset requires parsing to the transport header. Do not add a parser, use existing segmentation parsing. Thanks to SKB_GSO_DODGY, that also catches bad packets that are hw offloaded. Again test both TSO and USO. Do not test UFO for the above reason, and do not test UDP tunnel offload. GSO packet are almost always CHECKSUM_PARTIAL. USO packets may be CHECKSUM_NONE since commit 10154dbded6d6 ("udp: Allow GSO transmit from devices with no checksum offload"), but then still these fields are initialized correctly in udp4_hwcsum/udp6_hwcsum_outgoing. So no need to test for ip_summed == CHECKSUM_PARTIAL first. This revises an existing fix mentioned in the Fixes tag, which broke small packets with GSO offload, as detected by kselftests.Show less

In the Linux kernel, the following vulnerability has been resolved: ASoC: cs-amp-lib: Fix NULL pointer crash if efi.get_variable is NULL Call efi_rt_services_supported() to check that efi.get_variable exists before calling it.Show less

In the Linux kernel, the following vulnerability has been resolved: drm/client: fix null pointer dereference in drm_client_modeset_probe In drm_client_modeset_probe(), the return value of drm_mode_duplicate() is assigned to modeset->mode, which will lead to a possible NULL pointer dereference on failure of drm_mode_duplicate(). Add a check to avoid npd.Show less

In the Linux kernel, the following vulnerability has been resolved: serial: core: check uartclk for zero to avoid divide by zero Calling ioctl TIOCSSERIAL with an invalid baud_base can result in uartclk being zero, which will result in a divide by zero error in uart_get_divisor(). The check for uartclk being zero in uart_set_info() needs to be done before other settings are made as subsequent calls to ioctl TIOCSSERIAL for the same port would be impacted if the uartclk check was done where uartclk gets set. Oops: divide error: 0000 PREEMPT SMP KASAN PTI RIP: 0010:uart_get_divisor (drivers/tty/serial/serial_core.c:580) Call Trace: <TASK> serial8250_get_divisor (drivers/tty/serial/8250/8250_port.c:2576 drivers/tty/serial/8250/8250_port.c:2589) serial8250_do_set_termios (drivers/tty/serial/8250/8250_port.c:502 drivers/tty/serial/8250/8250_port.c:2741) serial8250_set_termios (drivers/tty/serial/8250/8250_port.c:2862) uart_change_line_settings (./include/linux/spinlock.h:376 ./include/linux/serial_core.h:608 drivers/tty/serial/serial_core.c:222) uart_port_startup (drivers/tty/serial/serial_core.c:342) uart_startup (drivers/tty/serial/serial_core.c:368) uart_set_info (drivers/tty/serial/serial_core.c:1034) uart_set_info_user (drivers/tty/serial/serial_core.c:1059) tty_set_serial (drivers/tty/tty_io.c:2637) tty_ioctl (drivers/tty/tty_io.c:2647 drivers/tty/tty_io.c:2791) __x64_sys_ioctl (fs/ioctl.c:52 fs/ioctl.c:907 fs/ioctl.c:893 fs/ioctl.c:893) do_syscall_64 (arch/x86/entry/common.c:52 (discriminator 1) arch/x86/entry/common.c:83 (discriminator 1)) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) Rule: addShow less

In the Linux kernel, the following vulnerability has been resolved: memcg: protect concurrent access to mem_cgroup_idr Commit 73f576c04b94 ("mm: memcontrol: fix cgroup creation failure after many small jobs") decoupled the memcg IDs from the CSS ID space to fix the cgroup creation failures. It introduced IDR to maintain the memcg ID space. The IDR depends on external synchronization mechanisms for modifications. For the mem_cgroup_idr, the idr_alloc() and idr_replace() happen within css callback and thus are protected through cgroup_mutex from concurrent modifications. However idr_remove() for mem_cgroup_idr was not protected against concurrency and can be run concurrently for different memcgs when they hit their refcnt to zero. Fix that. We have been seeing list_lru based kernel crashes at a low frequency in our fleet for a long time. These crashes were in different part of list_lru code including list_lru_add(), list_lru_del() and reparenting code. Upon further inspection, it looked like for a given object (dentry and inode), the super_block's list_lru didn't have list_lru_one for the memcg of that object. The initial suspicions were either the object is not allocated through kmem_cache_alloc_lru() or somehow memcg_list_lru_alloc() failed to allocate list_lru_one() for a memcg but returned success. No evidence were found for these cases. Looking more deeply, we started seeing situations where valid memcg's id is not present in mem_cgroup_idr and in some cases multiple valid memcgs have same id and mem_cgroup_idr is pointing to one of them. So, the most reasonable explanation is that these situations can happen due to race between multiple idr_remove() calls or race between idr_alloc()/idr_replace() and idr_remove(). These races are causing multiple memcgs to acquire the same ID and then offlining of one of them would cleanup list_lrus on the system for all of them. Later access from other memcgs to the list_lru cause crashes due to missing list_lru_one.Show less