Linux Kernel

In the Linux kernel, the following vulnerability has been resolved: crypto: inside-secure/eip93 - fix kernel panic in driver detach During driver detach, the same hash algorithm is unregistered multiple times due to a wrong iterator.Show less

In the Linux kernel, the following vulnerability has been resolved: power: supply: goldfish: Fix use-after-free in power_supply_changed() Using the `devm_` variant for requesting IRQ _before_ the `devm_` variant for allocating/registering the `power_supply` handle, means that the `power_supply` handle will be deallocated/unregistered _before_ the interrupt handler (since `devm_` naturally deallocates in reverse allocation order). This means that during removal, there is a race condition where an interrupt can fire just _after_ the `power_supply` handle has been freed, *but* just _before_ the corresponding unregistration of the IRQ handler has run. This will lead to the IRQ handler calling `power_supply_changed()` with a freed `power_supply` handle. Which usually crashes the system or otherwise silently corrupts the memory... Note that there is a similar situation which can also happen during `probe()`; the possibility of an interrupt firing _before_ registering the `power_supply` handle. This would then lead to the nasty situation of using the `power_supply` handle *uninitialized* in `power_supply_changed()`. Fix this racy use-after-free by making sure the IRQ is requested _after_ the registration of the `power_supply` handle.Show less

In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: Fix slab-out-of-bounds read in DeleteIndexEntryRoot In the 'DeleteIndexEntryRoot' case of the 'do_action' function, the entry size ('esize') is retrieved from the log record without adequate bounds checking. Specifically, the code calculates the end of the entry ('e2') using: e2 = Add2Ptr(e1, esize); It then calculates the size for memmove using 'PtrOffset(e2, ...)', which subtracts the end pointer from the buffer limit. If 'esize' is maliciously large, 'e2' exceeds the used buffer size. This results in a negative offset which, when cast to size_t for memmove, interprets as a massive unsigned integer, leading to a heap buffer overflow. This commit adds a check to ensure that the entry size ('esize') strictly fits within the remaining used space of the index header before performing memory operations.Show less

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix EEXIST abort due to non-consecutive gaps in chunk allocation I have been observing a number of systems aborting at insert_dev_extents() in btrfs_create_pending_block_groups(). The following is a sample stack trace of such an abort coming from forced chunk allocation (typically behind CONFIG_BTRFS_EXPERIMENTAL) but this can theoretically happen to any DUP chunk allocation. [81.801] ------------[ cut here ]------------ [81.801] BTRFS: Transaction aborted (error -17) [81.801] WARNING: fs/btrfs/block-group.c:2876 at btrfs_create_pending_block_groups+0x721/0x770 [btrfs], CPU#1: bash/319 [81.802] Modules linked in: virtio_net btrfs xor zstd_compress raid6_pq null_blk [81.803] CPU: 1 UID: 0 PID: 319 Comm: bash Kdump: loaded Not tainted 6.19.0-rc6+ #319 NONE [81.803] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.17.0-2-2 04/01/2014 [81.804] RIP: 0010:btrfs_create_pending_block_groups+0x723/0x770 [btrfs] [81.806] RSP: 0018:ffffa36241a6bce8 EFLAGS: 00010282 [81.806] RAX: 000000000000000d RBX: ffff8e699921e400 RCX: 0000000000000000 [81.807] RDX: 0000000002040001 RSI: 00000000ffffffef RDI: ffffffffc0608bf0 [81.807] RBP: 00000000ffffffef R08: ffff8e69830f6000 R09: 0000000000000007 [81.808] R10: ffff8e699921e5e8 R11: 0000000000000000 R12: ffff8e6999228000 [81.808] R13: ffff8e6984d82000 R14: ffff8e69966a69c0 R15: ffff8e69aa47b000 [81.809] FS: 00007fec6bdd9740(0000) GS:ffff8e6b1b379000(0000) knlGS:0000000000000000 [81.809] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [81.810] CR2: 00005604833670f0 CR3: 0000000116679000 CR4: 00000000000006f0 [81.810] Call Trace: [81.810] <TASK> [81.810] __btrfs_end_transaction+0x3e/0x2b0 [btrfs] [81.811] btrfs_force_chunk_alloc_store+0xcd/0x140 [btrfs] [81.811] kernfs_fop_write_iter+0x15f/0x240 [81.812] vfs_write+0x264/0x500 [81.812] ksys_write+0x6c/0xe0 [81.812] do_syscall_64+0x66/0x770 [81.812] entry_SYSCALL_64_after_hwframe+0x76/0x7e [81.813] RIP: 0033:0x7fec6be66197 [81.814] RSP: 002b:00007fffb159dd30 EFLAGS: 00000202 ORIG_RAX: 0000000000000001 [81.815] RAX: ffffffffffffffda RBX: 00007fec6bdd9740 RCX: 00007fec6be66197 [81.815] RDX: 0000000000000002 RSI: 0000560483374f80 RDI: 0000000000000001 [81.816] RBP: 0000560483374f80 R08: 0000000000000000 R09: 0000000000000000 [81.816] R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000000002 [81.817] R13: 00007fec6bfb85c0 R14: 00007fec6bfb5ee0 R15: 00005604833729c0 [81.817] </TASK> [81.817] irq event stamp: 20039 [81.818] hardirqs last enabled at (20047): [<ffffffff99a68302>] __up_console_sem+0x52/0x60 [81.818] hardirqs last disabled at (20056): [<ffffffff99a682e7>] __up_console_sem+0x37/0x60 [81.819] softirqs last enabled at (19470): [<ffffffff999d2b46>] __irq_exit_rcu+0x96/0xc0 [81.819] softirqs last disabled at (19463): [<ffffffff999d2b46>] __irq_exit_rcu+0x96/0xc0 [81.820] ---[ end trace 0000000000000000 ]--- [81.820] BTRFS: error (device dm-7 state A) in btrfs_create_pending_block_groups:2876: errno=-17 Object already exists Inspecting these aborts with drgn, I observed a pattern of overlapping chunk_maps. Note how stripe 1 of the first chunk overlaps in physical address with stripe 0 of the second chunk. Physical Start Physical End Length Logical Type Stripe ---------------------------------------------------------------------------------------------------- 0x0000000102500000 0x0000000142500000 1.0G 0x0000000641d00000 META|DUP 0/2 0x0000000142500000 0x0000000182500000 1.0G 0x0000000641d00000 META|DUP 1/2 0x0000000142500000 0x0000000182500000 1.0G 0x0000000601d00000 META|DUP 0/2 0x0000000182500000 0x00000001c2500000 1.0G 0x0000000601d00000 META|DUP 1/2 Now how could this possibly happen? All chunk allocation is ---truncated---Show less

In the Linux kernel, the following vulnerability has been resolved: bpf: Preserve id of register in sync_linked_regs() sync_linked_regs() copies the id of known_reg to reg when propagating bounds of known_reg to reg using the off of known_reg, but when known_reg was linked to reg like: known_reg = reg ; both known_reg and reg get same id known_reg += 4 ; known_reg gets off = 4, and its id gets BPF_ADD_CONST now when a call to sync_linked_regs() happens, let's say with the following: if known_reg >= 10 goto pc+2 known_reg's new bounds are propagated to reg but now reg gets BPF_ADD_CONST from the copy. This means if another link to reg is created like: another_reg = reg ; another_reg should get the id of reg but assign_scalar_id_before_mov() sees BPF_ADD_CONST on reg and assigns a new id to it. As reg has a new id now, known_reg's link to reg is broken. If we find new bounds for known_reg, they will not be propagated to reg. This can be seen in the selftest added in the next commit: 0: (85) call bpf_get_prandom_u32#7 ; R0=scalar() 1: (57) r0 &= 255 ; R0=scalar(smin=smin32=0,smax=umax=smax32=umax32=255,var_off=(0x0; 0xff)) 2: (bf) r1 = r0 ; R0=scalar(id=1,smin=smin32=0,smax=umax=smax32=umax32=255,var_off=(0x0; 0xff)) R1=scalar(id=1,smin=smin32=0,smax=umax=smax32=umax32=255,var_off=(0x0; 0xff)) 3: (07) r1 += 4 ; R1=scalar(id=1+4,smin=umin=smin32=umin32=4,smax=umax=smax32=umax32=259,var_off=(0x0; 0x1ff)) 4: (a5) if r1 < 0xa goto pc+4 ; R1=scalar(id=1+4,smin=umin=smin32=umin32=10,smax=umax=smax32=umax32=259,var_off=(0x0; 0x1ff)) 5: (bf) r2 = r0 ; R0=scalar(id=2,smin=umin=smin32=umin32=6,smax=umax=smax32=umax32=255) R2=scalar(id=2,smin=umin=smin32=umin32=6,smax=umax=smax32=umax32=255) 6: (a5) if r1 < 0xe goto pc+2 ; R1=scalar(id=1+4,smin=umin=smin32=umin32=14,smax=umax=smax32=umax32=259,var_off=(0x0; 0x1ff)) 7: (35) if r0 >= 0xa goto pc+1 ; R0=scalar(id=2,smin=umin=smin32=umin32=6,smax=umax=smax32=umax32=9,var_off=(0x0; 0xf)) 8: (37) r0 /= 0 div by zero When 4 is verified, r1's bounds are propagated to r0 but r0 also gets BPF_ADD_CONST (bug). When 5 is verified, r0 gets a new id (2) and its link with r1 is broken. After 6 we know r1 has bounds [14, 259] and therefore r0 should have bounds [10, 255], therefore the branch at 7 is always taken. But because r0's id was changed to 2, r1's new bounds are not propagated to r0. The verifier still thinks r0 has bounds [6, 255] before 7 and execution can reach div by zero. Fix this by preserving id in sync_linked_regs() like off and subreg_def.Show less

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix tcx/netkit detach permissions when prog fd isn't given This commit fixes a security issue where BPF_PROG_DETACH on tcx or netkit devices could be executed by any user when no program fd was provided, bypassing permission checks. The fix adds a capability check for CAP_NET_ADMIN or CAP_SYS_ADMIN in this case.Show less

In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: Hold mm structure across iommu_sva_unbind_device() Some tests trigger a crash in iommu_sva_unbind_device() due to accessing iommu_mm after the associated mm structure has been freed. Fix this by taking an explicit reference to the mm structure after successfully binding the device, and releasing it only after the device is unbound. This ensures the mm remains valid for the entire SVA bind/unbind lifetime.Show less

In the Linux kernel, the following vulnerability has been resolved: net: mctp: ensure our nlmsg responses are initialised Syed Faraz Abrar (@farazsth98) from Zellic, and Pumpkin (@u1f383) from DEVCORE Research Team working with Trend Micro Zero Day Initiative report that a RTM_GETNEIGH will return uninitalised data in the pad bytes of the ndmsg data. Ensure we're initialising the netlink data to zero, in the link, addr and neigh response messages.Show less

In the Linux kernel, the following vulnerability has been resolved: ovpn: fix possible use-after-free in ovpn_net_xmit When building the skb_list in ovpn_net_xmit, skb_share_check will free the original skb if it is shared. The current implementation continues to use the stale skb pointer for subsequent operations: - peer lookup, - skb_dst_drop (even though all segments produced by skb_gso_segment will have a dst attached), - ovpn_peer_stats_increment_tx. Fix this by moving the peer lookup and skb_dst_drop before segmentation so that the original skb is still valid when used. Return early if all segments fail skb_share_check and the list ends up empty. Also switch ovpn_peer_stats_increment_tx to use skb_list.next; the next patch fixes the stats logic.Show less

In the Linux kernel, the following vulnerability has been resolved: media: chips-media: wave5: Fix memory leak on codec_info allocation failure In wave5_vpu_open_enc() and wave5_vpu_open_dec(), a vpu instance is allocated via kzalloc(). If the subsequent allocation for inst->codec_info fails, the functions return -ENOMEM without freeing the previously allocated instance, causing a memory leak. Fix this by calling kfree() on the instance in this error path to ensure it is properly released.Show less

In the Linux kernel, the following vulnerability has been resolved: bpf: Require frozen map for calculating map hash Currently, bpf_map_get_info_by_fd calculates and caches the hash of the map regardless of the map's frozen state. This leads to a TOCTOU bug where userspace can call BPF_OBJ_GET_INFO_BY_FD to cache the hash and then modify the map contents before freezing. Therefore, a trusted loader can be tricked into verifying the stale hash while loading the modified contents. Fix this by returning -EPERM if the map is not frozen when the hash is requested. This ensures the hash is only generated for the final, immutable state of the map.Show less

In the Linux kernel, the following vulnerability has been resolved: rust: pwm: Fix potential memory leak on init error When initializing a PWM chip using pwmchip_alloc(), the allocated device owns an initial reference that must be released on all error paths. If __pinned_init() were to fail, the allocated pwm_chip would currently leak because the error path returns without calling pwmchip_put().Show less

In the Linux kernel, the following vulnerability has been resolved: thermal/of: Fix reference leak in thermal_of_cm_lookup() In thermal_of_cm_lookup(), tr_np is obtained via of_parse_phandle(), but never released. Use the __free(device_node) cleanup attribute to automatically release the node and fix the leak. [ rjw: Changelog edits ]Show less

In the Linux kernel, the following vulnerability has been resolved: ksmbd: call ksmbd_vfs_kern_path_end_removing() on some error paths There are two places where ksmbd_vfs_kern_path_end_removing() needs to be called in order to balance what the corresponding successful call to ksmbd_vfs_kern_path_start_removing() has done, i.e. drop inode locks and put the taken references. Otherwise there might be potential deadlocks and unbalanced locks which are caught like: BUG: workqueue leaked lock or atomic: kworker/5:21/0x00000000/7596 last function: handle_ksmbd_work 2 locks held by kworker/5:21/7596: #0: ffff8881051ae448 (sb_writers#3){.+.+}-{0:0}, at: ksmbd_vfs_kern_path_locked+0x142/0x660 #1: ffff888130e966c0 (&type->i_mutex_dir_key#3/1){+.+.}-{4:4}, at: ksmbd_vfs_kern_path_locked+0x17d/0x660 CPU: 5 PID: 7596 Comm: kworker/5:21 Not tainted 6.1.162-00456-gc29b353f383b #138 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-debian-1.17.0-1 04/01/2014 Workqueue: ksmbd-io handle_ksmbd_work Call Trace: <TASK> dump_stack_lvl+0x44/0x5b process_one_work.cold+0x57/0x5c worker_thread+0x82/0x600 kthread+0x153/0x190 ret_from_fork+0x22/0x30 </TASK> Found by Linux Verification Center (linuxtesting.org).Show less

In the Linux kernel, the following vulnerability has been resolved: net: usb: catc: enable basic endpoint checking catc_probe() fills three URBs with hardcoded endpoint pipes without verifying the endpoint descriptors: - usb_sndbulkpipe(usbdev, 1) and usb_rcvbulkpipe(usbdev, 1) for TX/RX - usb_rcvintpipe(usbdev, 2) for interrupt status A malformed USB device can present these endpoints with transfer types that differ from what the driver assumes. Add a catc_usb_ep enum for endpoint numbers, replacing magic constants throughout. Add usb_check_bulk_endpoints() and usb_check_int_endpoints() calls after usb_set_interface() to verify endpoint types before use, rejecting devices with mismatched descriptors at probe time. Similar to - commit 90b7f2961798 ("net: usb: rtl8150: enable basic endpoint checking") which fixed the issue in rtl8150.Show less

In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx5: Fix memory leak in GET_DATA_DIRECT_SYSFS_PATH handler The UVERBS_HANDLER(MLX5_IB_METHOD_GET_DATA_DIRECT_SYSFS_PATH) function allocates memory for the device path using kobject_get_path(). If the length of the device path exceeds the output buffer length, the function returns -ENOSPC but does not free the allocated memory, resulting in a memory leak. Add a kfree() call to the error path to ensure the allocated memory is properly freed. Compile tested only. Issue found using a prototype static analysis tool and code review.Show less

In the Linux kernel, the following vulnerability has been resolved: mtd: parsers: Fix memory leak in mtd_parser_tplink_safeloader_parse() The function mtd_parser_tplink_safeloader_parse() allocates buf via mtd_parser_tplink_safeloader_read_table(). If the allocation for parts[idx].name fails inside the loop, the code jumps to the err_free label without freeing buf, leading to a memory leak. Fix this by freeing the temporary buffer buf in the err_free label. Compile tested only. Issue found using a prototype static analysis tool and code review.Show less

In the Linux kernel, the following vulnerability has been resolved: ext4: fix dirtyclusters double decrement on fs shutdown fstests test generic/388 occasionally reproduces a warning in ext4_put_super() associated with the dirty clusters count: WARNING: CPU: 7 PID: 76064 at fs/ext4/super.c:1324 ext4_put_super+0x48c/0x590 [ext4] Tracing the failure shows that the warning fires due to an s_dirtyclusters_counter value of -1. IOW, this appears to be a spurious decrement as opposed to some sort of leak. Further tracing of the dirty cluster count deltas and an LLM scan of the resulting output identified the cause as a double decrement in the error path between ext4_mb_mark_diskspace_used() and the caller ext4_mb_new_blocks(). First, note that generic/388 is a shutdown vs. fsstress test and so produces a random set of operations and shutdown injections. In the problematic case, the shutdown triggers an error return from the ext4_handle_dirty_metadata() call(s) made from ext4_mb_mark_context(). The changed value is non-zero at this point, so ext4_mb_mark_diskspace_used() does not exit after the error bubbles up from ext4_mb_mark_context(). Instead, the former decrements both cluster counters and returns the error up to ext4_mb_new_blocks(). The latter falls into the !ar->len out path which decrements the dirty clusters counter a second time, creating the inconsistency. To avoid this problem and simplify ownership of the cluster reservation in this codepath, lift the counter reduction to a single place in the caller. This makes it more clear that ext4_mb_new_blocks() is responsible for acquiring cluster reservation (via ext4_claim_free_clusters()) in the !delalloc case as well as releasing it, regardless of whether it ends up consumed or returned due to failure.Show less

In the Linux kernel, the following vulnerability has been resolved: sched/rt: Skip currently executing CPU in rto_next_cpu() CPU0 becomes overloaded when hosting a CPU-bound RT task, a non-CPU-bound RT task, and a CFS task stuck in kernel space. When other CPUs switch from RT to non-RT tasks, RT load balancing (LB) is triggered; with HAVE_RT_PUSH_IPI enabled, they send IPIs to CPU0 to drive the execution of rto_push_irq_work_func. During push_rt_task on CPU0, if next_task->prio < rq->donor->prio, resched_curr() sets NEED_RESCHED and after the push operation completes, CPU0 calls rto_next_cpu(). Since only CPU0 is overloaded in this scenario, rto_next_cpu() should ideally return -1 (no further IPI needed). However, multiple CPUs invoking tell_cpu_to_push() during LB increments rd->rto_loop_next. Even when rd->rto_cpu is set to -1, the mismatch between rd->rto_loop and rd->rto_loop_next forces rto_next_cpu() to restart its search from -1. With CPU0 remaining overloaded (satisfying rt_nr_migratory && rt_nr_total > 1), it gets reselected, causing CPU0 to queue irq_work to itself and send self-IPIs repeatedly. As long as CPU0 stays overloaded and other CPUs run pull_rt_tasks(), it falls into an infinite self-IPI loop, which triggers a CPU hardlockup due to continuous self-interrupts. The trigging scenario is as follows: cpu0 cpu1 cpu2 pull_rt_task tell_cpu_to_push <------------irq_work_queue_on rto_push_irq_work_func push_rt_task resched_curr(rq) pull_rt_task rto_next_cpu tell_cpu_to_push <-------------------------- atomic_inc(rto_loop_next) rd->rto_loop != next rto_next_cpu irq_work_queue_on rto_push_irq_work_func Fix redundant self-IPI by filtering the initiating CPU in rto_next_cpu(). This solution has been verified to effectively eliminate spurious self-IPIs and prevent CPU hardlockup scenarios.Show less

In the Linux kernel, the following vulnerability has been resolved: ovpn: tcp - don't deref NULL sk_socket member after tcp_close() When deleting a peer in case of keepalive expiration, the peer is removed from the OpenVPN hashtable and is temporary inserted in a "release list" for further processing. This happens in: ovpn_peer_keepalive_work() unlock_ovpn(release_list) This processing includes detaching from the socket being used to talk to this peer, by restoring its original proto and socket ops/callbacks. In case of TCP it may happen that, while the peer is sitting in the release list, userspace decides to close the socket. This will result in a concurrent execution of: tcp_close(sk) __tcp_close(sk) sock_orphan(sk) sk_set_socket(sk, NULL) The last function call will set sk->sk_socket to NULL. When the releasing routine is resumed, ovpn_tcp_socket_detach() will attempt to dereference sk->sk_socket to restore its original ops member. This operation will crash due to sk->sk_socket being NULL. Fix this race condition by testing-and-accessing sk->sk_socket atomically under sk->sk_callback_lock.Show less