Linux Kernel

In the Linux kernel, the following vulnerability has been resolved: ext4: avoid use-after-free in ext4_ext_show_leaf() In ext4_find_extent(), path may be freed by error or be reallocated, so using a previously saved *ppath may have been freed and thus may trigger use-after-free, as follows: ext4_split_extent path = *ppath; ext4_split_extent_at(ppath) path = ext4_find_extent(ppath) ext4_split_extent_at(ppath) // ext4_find_extent fails to free path // but zeroout succeeds ext4_ext_show_leaf(inode, path) eh = path[depth].p_hdr // path use-after-free !!! Similar to ext4_split_extent_at(), we use *ppath directly as an input to ext4_ext_show_leaf(). Fix a spelling error by the way. Same problem in ext4_ext_handle_unwritten_extents(). Since 'path' is only used in ext4_ext_show_leaf(), remove 'path' and use *ppath directly. This issue is triggered only when EXT_DEBUG is defined and therefore does not affect functionality.Show less

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix a sdiv overflow issue Zac Ecob reported a problem where a bpf program may cause kernel crash due to the following error: Oops: divide error: 0000 [#1] PREEMPT SMP KASAN PTI The failure is due to the below signed divide: LLONG_MIN/-1 where LLONG_MIN equals to -9,223,372,036,854,775,808. LLONG_MIN/-1 is supposed to give a positive number 9,223,372,036,854,775,808, but it is impossible since for 64-bit system, the maximum positive number is 9,223,372,036,854,775,807. On x86_64, LLONG_MIN/-1 will cause a kernel exception. On arm64, the result for LLONG_MIN/-1 is LLONG_MIN. Further investigation found all the following sdiv/smod cases may trigger an exception when bpf program is running on x86_64 platform: - LLONG_MIN/-1 for 64bit operation - INT_MIN/-1 for 32bit operation - LLONG_MIN%-1 for 64bit operation - INT_MIN%-1 for 32bit operation where -1 can be an immediate or in a register. On arm64, there are no exceptions: - LLONG_MIN/-1 = LLONG_MIN - INT_MIN/-1 = INT_MIN - LLONG_MIN%-1 = 0 - INT_MIN%-1 = 0 where -1 can be an immediate or in a register. Insn patching is needed to handle the above cases and the patched codes produced results aligned with above arm64 result. The below are pseudo codes to handle sdiv/smod exceptions including both divisor -1 and divisor 0 and the divisor is stored in a register. sdiv: tmp = rX tmp += 1 /* [-1, 0] -> [0, 1] if tmp >(unsigned) 1 goto L2 if tmp == 0 goto L1 rY = 0 L1: rY = -rY; goto L3 L2: rY /= rX L3: smod: tmp = rX tmp += 1 /* [-1, 0] -> [0, 1] if tmp >(unsigned) 1 goto L1 if tmp == 1 (is64 ? goto L2 : goto L3) rY = 0; goto L2 L1: rY %= rX L2: goto L4 // only when !is64 L3: wY = wY // only when !is64 L4: [1] https://lore.kernel.org/bpf/tPJLTEh7S_DxFEqAI2Ji5MBSoZVg7_G-Py2iaZpAaWtM961fFTWtsnlzwvTbzBzaUzwQAoNATXKUlt0LZOFgnDcIyKCswAnAGdUF3LBrhGQ=@protonmail.com/Show less

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to don't panic system for no free segment fault injection f2fs: fix to don't panic system for no free segment fault injection syzbot reports a f2fs bug as below: F2FS-fs (loop0): inject no free segment in get_new_segment of __allocate_new_segment+0x1ce/0x940 fs/f2fs/segment.c:3167 F2FS-fs (loop0): Stopped filesystem due to reason: 7 ------------[ cut here ]------------ kernel BUG at fs/f2fs/segment.c:2748! CPU: 0 UID: 0 PID: 5109 Comm: syz-executor304 Not tainted 6.11.0-rc6-syzkaller-00363-g89f5e14d05b4 #0 RIP: 0010:get_new_segment fs/f2fs/segment.c:2748 [inline] RIP: 0010:new_curseg+0x1f61/0x1f70 fs/f2fs/segment.c:2836 Call Trace: __allocate_new_segment+0x1ce/0x940 fs/f2fs/segment.c:3167 f2fs_allocate_new_section fs/f2fs/segment.c:3181 [inline] f2fs_allocate_pinning_section+0xfa/0x4e0 fs/f2fs/segment.c:3195 f2fs_expand_inode_data+0x5d6/0xbb0 fs/f2fs/file.c:1799 f2fs_fallocate+0x448/0x960 fs/f2fs/file.c:1903 vfs_fallocate+0x553/0x6c0 fs/open.c:334 do_vfs_ioctl+0x2592/0x2e50 fs/ioctl.c:886 __do_sys_ioctl fs/ioctl.c:905 [inline] __se_sys_ioctl+0x81/0x170 fs/ioctl.c:893 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0010:get_new_segment fs/f2fs/segment.c:2748 [inline] RIP: 0010:new_curseg+0x1f61/0x1f70 fs/f2fs/segment.c:2836 The root cause is when we inject no free segment fault into f2fs, we should not panic system, fix it.Show less

In the Linux kernel, the following vulnerability has been resolved: platform/x86: ISST: Fix the KASAN report slab-out-of-bounds bug Attaching SST PCI device to VM causes "BUG: KASAN: slab-out-of-bounds". kasan report: [ 19.411889] ================================================================== [ 19.413702] BUG: KASAN: slab-out-of-bounds in _isst_if_get_pci_dev+0x3d5/0x400 [isst_if_common] [ 19.415634] Read of size 8 at addr ffff888829e65200 by task cpuhp/16/113 [ 19.417368] [ 19.418627] CPU: 16 PID: 113 Comm: cpuhp/16 Tainted: G E 6.9.0 #10 [ 19.420435] Hardware name: VMware, Inc. VMware20,1/440BX Desktop Reference Platform, BIOS VMW201.00V.20192059.B64.2207280713 07/28/2022 [ 19.422687] Call Trace: [ 19.424091] <TASK> [ 19.425448] dump_stack_lvl+0x5d/0x80 [ 19.426963] ? _isst_if_get_pci_dev+0x3d5/0x400 [isst_if_common] [ 19.428694] print_report+0x19d/0x52e [ 19.430206] ? __pfx__raw_spin_lock_irqsave+0x10/0x10 [ 19.431837] ? _isst_if_get_pci_dev+0x3d5/0x400 [isst_if_common] [ 19.433539] kasan_report+0xf0/0x170 [ 19.435019] ? _isst_if_get_pci_dev+0x3d5/0x400 [isst_if_common] [ 19.436709] _isst_if_get_pci_dev+0x3d5/0x400 [isst_if_common] [ 19.438379] ? __pfx_sched_clock_cpu+0x10/0x10 [ 19.439910] isst_if_cpu_online+0x406/0x58f [isst_if_common] [ 19.441573] ? __pfx_isst_if_cpu_online+0x10/0x10 [isst_if_common] [ 19.443263] ? ttwu_queue_wakelist+0x2c1/0x360 [ 19.444797] cpuhp_invoke_callback+0x221/0xec0 [ 19.446337] cpuhp_thread_fun+0x21b/0x610 [ 19.447814] ? __pfx_cpuhp_thread_fun+0x10/0x10 [ 19.449354] smpboot_thread_fn+0x2e7/0x6e0 [ 19.450859] ? __pfx_smpboot_thread_fn+0x10/0x10 [ 19.452405] kthread+0x29c/0x350 [ 19.453817] ? __pfx_kthread+0x10/0x10 [ 19.455253] ret_from_fork+0x31/0x70 [ 19.456685] ? __pfx_kthread+0x10/0x10 [ 19.458114] ret_from_fork_asm+0x1a/0x30 [ 19.459573] </TASK> [ 19.460853] [ 19.462055] Allocated by task 1198: [ 19.463410] kasan_save_stack+0x30/0x50 [ 19.464788] kasan_save_track+0x14/0x30 [ 19.466139] __kasan_kmalloc+0xaa/0xb0 [ 19.467465] __kmalloc+0x1cd/0x470 [ 19.468748] isst_if_cdev_register+0x1da/0x350 [isst_if_common] [ 19.470233] isst_if_mbox_init+0x108/0xff0 [isst_if_mbox_msr] [ 19.471670] do_one_initcall+0xa4/0x380 [ 19.472903] do_init_module+0x238/0x760 [ 19.474105] load_module+0x5239/0x6f00 [ 19.475285] init_module_from_file+0xd1/0x130 [ 19.476506] idempotent_init_module+0x23b/0x650 [ 19.477725] __x64_sys_finit_module+0xbe/0x130 [ 19.476506] idempotent_init_module+0x23b/0x650 [ 19.477725] __x64_sys_finit_module+0xbe/0x130 [ 19.478920] do_syscall_64+0x82/0x160 [ 19.480036] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 19.481292] [ 19.482205] The buggy address belongs to the object at ffff888829e65000 which belongs to the cache kmalloc-512 of size 512 [ 19.484818] The buggy address is located 0 bytes to the right of allocated 512-byte region [ffff888829e65000, ffff888829e65200) [ 19.487447] [ 19.488328] The buggy address belongs to the physical page: [ 19.489569] page: refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff888829e60c00 pfn:0x829e60 [ 19.491140] head: order:3 entire_mapcount:0 nr_pages_mapped:0 pincount:0 [ 19.492466] anon flags: 0x57ffffc0000840(slab|head|node=1|zone=2|lastcpupid=0x1fffff) [ 19.493914] page_type: 0xffffffff() [ 19.494988] raw: 0057ffffc0000840 ffff88810004cc80 0000000000000000 0000000000000001 [ 19.496451] raw: ffff888829e60c00 0000000080200018 00000001ffffffff 0000000000000000 [ 19.497906] head: 0057ffffc0000840 ffff88810004cc80 0000000000000000 0000000000000001 [ 19.499379] head: ffff888829e60c00 0000000080200018 00000001ffffffff 0000000000000000 [ 19.500844] head: 0057ffffc0000003 ffffea0020a79801 ffffea0020a79848 00000000ffffffff [ 19.502316] head: 0000000800000000 0000000000000000 00000000ffffffff 0000000000000000 [ 19.503784] page dumped because: k ---truncated---Show less

In the Linux kernel, the following vulnerability has been resolved: mm, slub: avoid zeroing kmalloc redzone Since commit 946fa0dbf2d8 ("mm/slub: extend redzone check to extra allocated kmalloc space than requested"), setting orig_size treats the wasted space (object_size - orig_size) as a redzone. However with init_on_free=1 we clear the full object->size, including the redzone. Additionally we clear the object metadata, including the stored orig_size, making it zero, which makes check_object() treat the whole object as a redzone. These issues lead to the following BUG report with "slub_debug=FUZ init_on_free=1": [ 0.000000] ============================================================================= [ 0.000000] BUG kmalloc-8 (Not tainted): kmalloc Redzone overwritten [ 0.000000] ----------------------------------------------------------------------------- [ 0.000000] [ 0.000000] 0xffff000010032858-0xffff00001003285f @offset=2136. First byte 0x0 instead of 0xcc [ 0.000000] FIX kmalloc-8: Restoring kmalloc Redzone 0xffff000010032858-0xffff00001003285f=0xcc [ 0.000000] Slab 0xfffffdffc0400c80 objects=36 used=23 fp=0xffff000010032a18 flags=0x3fffe0000000200(workingset|node=0|zone=0|lastcpupid=0x1ffff) [ 0.000000] Object 0xffff000010032858 @offset=2136 fp=0xffff0000100328c8 [ 0.000000] [ 0.000000] Redzone ffff000010032850: cc cc cc cc cc cc cc cc ........ [ 0.000000] Object ffff000010032858: cc cc cc cc cc cc cc cc ........ [ 0.000000] Redzone ffff000010032860: cc cc cc cc cc cc cc cc ........ [ 0.000000] Padding ffff0000100328b4: 00 00 00 00 00 00 00 00 00 00 00 00 ............ [ 0.000000] CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.11.0-rc3-next-20240814-00004-g61844c55c3f4 #144 [ 0.000000] Hardware name: NXP i.MX95 19X19 board (DT) [ 0.000000] Call trace: [ 0.000000] dump_backtrace+0x90/0xe8 [ 0.000000] show_stack+0x18/0x24 [ 0.000000] dump_stack_lvl+0x74/0x8c [ 0.000000] dump_stack+0x18/0x24 [ 0.000000] print_trailer+0x150/0x218 [ 0.000000] check_object+0xe4/0x454 [ 0.000000] free_to_partial_list+0x2f8/0x5ec To address the issue, use orig_size to clear the used area. And restore the value of orig_size after clear the remaining area. When CONFIG_SLUB_DEBUG not defined, (get_orig_size()' directly returns s->object_size. So when using memset to init the area, the size can simply be orig_size, as orig_size returns object_size when CONFIG_SLUB_DEBUG not enabled. And orig_size can never be bigger than object_size.Show less

In the Linux kernel, the following vulnerability has been resolved: ext4: fix slab-use-after-free in ext4_split_extent_at() We hit the following use-after-free: ================================================================== BUG: KASAN: slab-use-after-free in ext4_split_extent_at+0xba8/0xcc0 Read of size 2 at addr ffff88810548ed08 by task kworker/u20:0/40 CPU: 0 PID: 40 Comm: kworker/u20:0 Not tainted 6.9.0-dirty #724 Call Trace: <TASK> kasan_report+0x93/0xc0 ext4_split_extent_at+0xba8/0xcc0 ext4_split_extent.isra.0+0x18f/0x500 ext4_split_convert_extents+0x275/0x750 ext4_ext_handle_unwritten_extents+0x73e/0x1580 ext4_ext_map_blocks+0xe20/0x2dc0 ext4_map_blocks+0x724/0x1700 ext4_do_writepages+0x12d6/0x2a70 [...] Allocated by task 40: __kmalloc_noprof+0x1ac/0x480 ext4_find_extent+0xf3b/0x1e70 ext4_ext_map_blocks+0x188/0x2dc0 ext4_map_blocks+0x724/0x1700 ext4_do_writepages+0x12d6/0x2a70 [...] Freed by task 40: kfree+0xf1/0x2b0 ext4_find_extent+0xa71/0x1e70 ext4_ext_insert_extent+0xa22/0x3260 ext4_split_extent_at+0x3ef/0xcc0 ext4_split_extent.isra.0+0x18f/0x500 ext4_split_convert_extents+0x275/0x750 ext4_ext_handle_unwritten_extents+0x73e/0x1580 ext4_ext_map_blocks+0xe20/0x2dc0 ext4_map_blocks+0x724/0x1700 ext4_do_writepages+0x12d6/0x2a70 [...] ================================================================== The flow of issue triggering is as follows: ext4_split_extent_at path = *ppath ext4_ext_insert_extent(ppath) ext4_ext_create_new_leaf(ppath) ext4_find_extent(orig_path) path = *orig_path read_extent_tree_block // return -ENOMEM or -EIO ext4_free_ext_path(path) kfree(path) *orig_path = NULL a. If err is -ENOMEM: ext4_ext_dirty(path + path->p_depth) // path use-after-free !!! b. If err is -EIO and we have EXT_DEBUG defined: ext4_ext_show_leaf(path) eh = path[depth].p_hdr // path also use-after-free !!! So when trying to zeroout or fix the extent length, call ext4_find_extent() to update the path. In addition we use *ppath directly as an ext4_ext_show_leaf() input to avoid possible use-after-free when EXT_DEBUG is defined, and to avoid unnecessary path updates.Show less

In the Linux kernel, the following vulnerability has been resolved: ext4: aovid use-after-free in ext4_ext_insert_extent() As Ojaswin mentioned in Link, in ext4_ext_insert_extent(), if the path is reallocated in ext4_ext_create_new_leaf(), we'll use the stale path and cause UAF. Below is a sample trace with dummy values: ext4_ext_insert_extent path = *ppath = 2000 ext4_ext_create_new_leaf(ppath) ext4_find_extent(ppath) path = *ppath = 2000 if (depth > path[0].p_maxdepth) kfree(path = 2000); *ppath = path = NULL; path = kcalloc() = 3000 *ppath = 3000; return path; /* here path is still 2000, UAF! */ eh = path[depth].p_hdr ================================================================== BUG: KASAN: slab-use-after-free in ext4_ext_insert_extent+0x26d4/0x3330 Read of size 8 at addr ffff8881027bf7d0 by task kworker/u36:1/179 CPU: 3 UID: 0 PID: 179 Comm: kworker/u6:1 Not tainted 6.11.0-rc2-dirty #866 Call Trace: <TASK> ext4_ext_insert_extent+0x26d4/0x3330 ext4_ext_map_blocks+0xe22/0x2d40 ext4_map_blocks+0x71e/0x1700 ext4_do_writepages+0x1290/0x2800 [...] Allocated by task 179: ext4_find_extent+0x81c/0x1f70 ext4_ext_map_blocks+0x146/0x2d40 ext4_map_blocks+0x71e/0x1700 ext4_do_writepages+0x1290/0x2800 ext4_writepages+0x26d/0x4e0 do_writepages+0x175/0x700 [...] Freed by task 179: kfree+0xcb/0x240 ext4_find_extent+0x7c0/0x1f70 ext4_ext_insert_extent+0xa26/0x3330 ext4_ext_map_blocks+0xe22/0x2d40 ext4_map_blocks+0x71e/0x1700 ext4_do_writepages+0x1290/0x2800 ext4_writepages+0x26d/0x4e0 do_writepages+0x175/0x700 [...] ================================================================== So use *ppath to update the path to avoid the above problem.Show less

In the Linux kernel, the following vulnerability has been resolved: ext4: fix double brelse() the buffer of the extents path In ext4_ext_try_to_merge_up(), set path[1].p_bh to NULL after it has been released, otherwise it may be released twice. An example of what triggers this is as follows: split2 map split1 |--------|-------|--------| ext4_ext_map_blocks ext4_ext_handle_unwritten_extents ext4_split_convert_extents // path->p_depth == 0 ext4_split_extent // 1. do split1 ext4_split_extent_at |ext4_ext_insert_extent | ext4_ext_create_new_leaf | ext4_ext_grow_indepth | le16_add_cpu(&neh->eh_depth, 1) | ext4_find_extent | // return -ENOMEM |// get error and try zeroout |path = ext4_find_extent | path->p_depth = 1 |ext4_ext_try_to_merge | ext4_ext_try_to_merge_up | path->p_depth = 0 | brelse(path[1].p_bh) ---> not set to NULL here |// zeroout success // 2. update path ext4_find_extent // 3. do split2 ext4_split_extent_at ext4_ext_insert_extent ext4_ext_create_new_leaf ext4_ext_grow_indepth le16_add_cpu(&neh->eh_depth, 1) ext4_find_extent path[0].p_bh = NULL; path->p_depth = 1 read_extent_tree_block ---> return err // path[1].p_bh is still the old value ext4_free_ext_path ext4_ext_drop_refs // path->p_depth == 1 brelse(path[1].p_bh) ---> brelse a buffer twice Finally got the following WARRNING when removing the buffer from lru: ============================================ VFS: brelse: Trying to free free buffer WARNING: CPU: 2 PID: 72 at fs/buffer.c:1241 __brelse+0x58/0x90 CPU: 2 PID: 72 Comm: kworker/u19:1 Not tainted 6.9.0-dirty #716 RIP: 0010:__brelse+0x58/0x90 Call Trace: <TASK> __find_get_block+0x6e7/0x810 bdev_getblk+0x2b/0x480 __ext4_get_inode_loc+0x48a/0x1240 ext4_get_inode_loc+0xb2/0x150 ext4_reserve_inode_write+0xb7/0x230 __ext4_mark_inode_dirty+0x144/0x6a0 ext4_ext_insert_extent+0x9c8/0x3230 ext4_ext_map_blocks+0xf45/0x2dc0 ext4_map_blocks+0x724/0x1700 ext4_do_writepages+0x12d6/0x2a70 [...] ============================================Show less

In the Linux kernel, the following vulnerability has been resolved: ext4: update orig_path in ext4_find_extent() In ext4_find_extent(), if the path is not big enough, we free it and set *orig_path to NULL. But after reallocating and successfully initializing the path, we don't update *orig_path, in which case the caller gets a valid path but a NULL ppath, and this may cause a NULL pointer dereference or a path memory leak. For example: ext4_split_extent path = *ppath = 2000 ext4_find_extent if (depth > path[0].p_maxdepth) kfree(path = 2000); *orig_path = path = NULL; path = kcalloc() = 3000 ext4_split_extent_at(*ppath = NULL) path = *ppath; ex = path[depth].p_ext; // NULL pointer dereference! ================================================================== BUG: kernel NULL pointer dereference, address: 0000000000000010 CPU: 6 UID: 0 PID: 576 Comm: fsstress Not tainted 6.11.0-rc2-dirty #847 RIP: 0010:ext4_split_extent_at+0x6d/0x560 Call Trace: <TASK> ext4_split_extent.isra.0+0xcb/0x1b0 ext4_ext_convert_to_initialized+0x168/0x6c0 ext4_ext_handle_unwritten_extents+0x325/0x4d0 ext4_ext_map_blocks+0x520/0xdb0 ext4_map_blocks+0x2b0/0x690 ext4_iomap_begin+0x20e/0x2c0 [...] ================================================================== Therefore, *orig_path is updated when the extent lookup succeeds, so that the caller can safely use path or *ppath.Show less

In the Linux kernel, the following vulnerability has been resolved: ext4: fix off by one issue in alloc_flex_gd() Wesley reported an issue: ================================================================== EXT4-fs (dm-5): resizing filesystem from 7168 to 786432 blocks ------------[ cut here ]------------ kernel BUG at fs/ext4/resize.c:324! CPU: 9 UID: 0 PID: 3576 Comm: resize2fs Not tainted 6.11.0+ #27 RIP: 0010:ext4_resize_fs+0x1212/0x12d0 Call Trace: __ext4_ioctl+0x4e0/0x1800 ext4_ioctl+0x12/0x20 __x64_sys_ioctl+0x99/0xd0 x64_sys_call+0x1206/0x20d0 do_syscall_64+0x72/0x110 entry_SYSCALL_64_after_hwframe+0x76/0x7e ================================================================== While reviewing the patch, Honza found that when adjusting resize_bg in alloc_flex_gd(), it was possible for flex_gd->resize_bg to be bigger than flexbg_size. The reproduction of the problem requires the following: o_group = flexbg_size * 2 * n; o_size = (o_group + 1) * group_size; n_group: [o_group + flexbg_size, o_group + flexbg_size * 2) o_size = (n_group + 1) * group_size; Take n=0,flexbg_size=16 as an example: last:15 |o---------------|--------------n-| o_group:0 resize to n_group:30 The corresponding reproducer is: img=test.img rm -f $img truncate -s 600M $img mkfs.ext4 -F $img -b 1024 -G 16 8M dev=`losetup -f --show $img` mkdir -p /tmp/test mount $dev /tmp/test resize2fs $dev 248M Delete the problematic plus 1 to fix the issue, and add a WARN_ON_ONCE() to prevent the issue from happening again. [ Note: another reproucer which this commit fixes is: img=test.img rm -f $img truncate -s 25MiB $img mkfs.ext4 -b 4096 -E nodiscard,lazy_itable_init=0,lazy_journal_init=0 $img truncate -s 3GiB $img dev=`losetup -f --show $img` mkdir -p /tmp/test mount $dev /tmp/test resize2fs $dev 3G umount $dev losetup -d $dev -- TYT ]Show less

In the Linux kernel, the following vulnerability has been resolved: drm: omapdrm: Add missing check for alloc_ordered_workqueue As it may return NULL pointer and cause NULL pointer dereference. Add check for the return value of alloc_ordered_workqueue.Show less

In the Linux kernel, the following vulnerability has been resolved: resource: fix region_intersects() vs add_memory_driver_managed() On a system with CXL memory, the resource tree (/proc/iomem) related to CXL memory may look like something as follows. 490000000-50fffffff : CXL Window 0 490000000-50fffffff : region0 490000000-50fffffff : dax0.0 490000000-50fffffff : System RAM (kmem) Because drivers/dax/kmem.c calls add_memory_driver_managed() during onlining CXL memory, which makes "System RAM (kmem)" a descendant of "CXL Window X". This confuses region_intersects(), which expects all "System RAM" resources to be at the top level of iomem_resource. This can lead to bugs. For example, when the following command line is executed to write some memory in CXL memory range via /dev/mem, $ dd if=data of=/dev/mem bs=$((1 << 10)) seek=$((0x490000000 >> 10)) count=1 dd: error writing '/dev/mem': Bad address 1+0 records in 0+0 records out 0 bytes copied, 0.0283507 s, 0.0 kB/s the command fails as expected. However, the error code is wrong. It should be "Operation not permitted" instead of "Bad address". More seriously, the /dev/mem permission checking in devmem_is_allowed() passes incorrectly. Although the accessing is prevented later because ioremap() isn't allowed to map system RAM, it is a potential security issue. During command executing, the following warning is reported in the kernel log for calling ioremap() on system RAM. ioremap on RAM at 0x0000000490000000 - 0x0000000490000fff WARNING: CPU: 2 PID: 416 at arch/x86/mm/ioremap.c:216 __ioremap_caller.constprop.0+0x131/0x35d Call Trace: memremap+0xcb/0x184 xlate_dev_mem_ptr+0x25/0x2f write_mem+0x94/0xfb vfs_write+0x128/0x26d ksys_write+0xac/0xfe do_syscall_64+0x9a/0xfd entry_SYSCALL_64_after_hwframe+0x4b/0x53 The details of command execution process are as follows. In the above resource tree, "System RAM" is a descendant of "CXL Window 0" instead of a top level resource. So, region_intersects() will report no System RAM resources in the CXL memory region incorrectly, because it only checks the top level resources. Consequently, devmem_is_allowed() will return 1 (allow access via /dev/mem) for CXL memory region incorrectly. Fortunately, ioremap() doesn't allow to map System RAM and reject the access. So, region_intersects() needs to be fixed to work correctly with the resource tree with "System RAM" not at top level as above. To fix it, if we found a unmatched resource in the top level, we will continue to search matched resources in its descendant resources. So, we will not miss any matched resources in resource tree anymore. In the new implementation, an example resource tree |------------- "CXL Window 0" ------------| |-- "System RAM" --| will behave similar as the following fake resource tree for region_intersects(, IORESOURCE_SYSTEM_RAM, ), |-- "System RAM" --||-- "CXL Window 0a" --| Where "CXL Window 0a" is part of the original "CXL Window 0" that isn't covered by "System RAM".Show less

In the Linux kernel, the following vulnerability has been resolved: ocfs2: fix possible null-ptr-deref in ocfs2_set_buffer_uptodate When doing cleanup, if flags without OCFS2_BH_READAHEAD, it may trigger NULL pointer dereference in the following ocfs2_set_buffer_uptodate() if bh is NULL.Show less

In the Linux kernel, the following vulnerability has been resolved: drm/xe: fix UAF around queue destruction We currently do stuff like queuing the final destruction step on a random system wq, which will outlive the driver instance. With bad timing we can teardown the driver with one or more work workqueue still being alive leading to various UAF splats. Add a fini step to ensure user queues are properly torn down. At this point GuC should already be nuked so queue itself should no longer be referenced from hw pov. v2 (Matt B) - Looks much safer to use a waitqueue and then just wait for the xa_array to become empty before triggering the drain. (cherry picked from commit 861108666cc0e999cffeab6aff17b662e68774e3)Show less

In the Linux kernel, the following vulnerability has been resolved: nfsd: map the EBADMSG to nfserr_io to avoid warning Ext4 will throw -EBADMSG through ext4_readdir when a checksum error occurs, resulting in the following WARNING. Fix it by mapping EBADMSG to nfserr_io. nfsd_buffered_readdir iterate_dir // -EBADMSG -74 ext4_readdir // .iterate_shared ext4_dx_readdir ext4_htree_fill_tree htree_dirblock_to_tree ext4_read_dirblock __ext4_read_dirblock ext4_dirblock_csum_verify warn_no_space_for_csum __warn_no_space_for_csum return ERR_PTR(-EFSBADCRC) // -EBADMSG -74 nfserrno // WARNING [ 161.115610] ------------[ cut here ]------------ [ 161.116465] nfsd: non-standard errno: -74 [ 161.117315] WARNING: CPU: 1 PID: 780 at fs/nfsd/nfsproc.c:878 nfserrno+0x9d/0xd0 [ 161.118596] Modules linked in: [ 161.119243] CPU: 1 PID: 780 Comm: nfsd Not tainted 5.10.0-00014-g79679361fd5d #138 [ 161.120684] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qe mu.org 04/01/2014 [ 161.123601] RIP: 0010:nfserrno+0x9d/0xd0 [ 161.124676] Code: 0f 87 da 30 dd 00 83 e3 01 b8 00 00 00 05 75 d7 44 89 ee 48 c7 c7 c0 57 24 98 89 44 24 04 c6 05 ce 2b 61 03 01 e8 99 20 d8 00 <0f> 0b 8b 44 24 04 eb b5 4c 89 e6 48 c7 c7 a0 6d a4 99 e8 cc 15 33 [ 161.127797] RSP: 0018:ffffc90000e2f9c0 EFLAGS: 00010286 [ 161.128794] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 161.130089] RDX: 1ffff1103ee16f6d RSI: 0000000000000008 RDI: fffff520001c5f2a [ 161.131379] RBP: 0000000000000022 R08: 0000000000000001 R09: ffff8881f70c1827 [ 161.132664] R10: ffffed103ee18304 R11: 0000000000000001 R12: 0000000000000021 [ 161.133949] R13: 00000000ffffffb6 R14: ffff8881317c0000 R15: ffffc90000e2fbd8 [ 161.135244] FS: 0000000000000000(0000) GS:ffff8881f7080000(0000) knlGS:0000000000000000 [ 161.136695] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 161.137761] CR2: 00007fcaad70b348 CR3: 0000000144256006 CR4: 0000000000770ee0 [ 161.139041] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 161.140291] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 161.141519] PKRU: 55555554 [ 161.142076] Call Trace: [ 161.142575] ? __warn+0x9b/0x140 [ 161.143229] ? nfserrno+0x9d/0xd0 [ 161.143872] ? report_bug+0x125/0x150 [ 161.144595] ? handle_bug+0x41/0x90 [ 161.145284] ? exc_invalid_op+0x14/0x70 [ 161.146009] ? asm_exc_invalid_op+0x12/0x20 [ 161.146816] ? nfserrno+0x9d/0xd0 [ 161.147487] nfsd_buffered_readdir+0x28b/0x2b0 [ 161.148333] ? nfsd4_encode_dirent_fattr+0x380/0x380 [ 161.149258] ? nfsd_buffered_filldir+0xf0/0xf0 [ 161.150093] ? wait_for_concurrent_writes+0x170/0x170 [ 161.151004] ? generic_file_llseek_size+0x48/0x160 [ 161.151895] nfsd_readdir+0x132/0x190 [ 161.152606] ? nfsd4_encode_dirent_fattr+0x380/0x380 [ 161.153516] ? nfsd_unlink+0x380/0x380 [ 161.154256] ? override_creds+0x45/0x60 [ 161.155006] nfsd4_encode_readdir+0x21a/0x3d0 [ 161.155850] ? nfsd4_encode_readlink+0x210/0x210 [ 161.156731] ? write_bytes_to_xdr_buf+0x97/0xe0 [ 161.157598] ? __write_bytes_to_xdr_buf+0xd0/0xd0 [ 161.158494] ? lock_downgrade+0x90/0x90 [ 161.159232] ? nfs4svc_decode_voidarg+0x10/0x10 [ 161.160092] nfsd4_encode_operation+0x15a/0x440 [ 161.160959] nfsd4_proc_compound+0x718/0xe90 [ 161.161818] nfsd_dispatch+0x18e/0x2c0 [ 161.162586] svc_process_common+0x786/0xc50 [ 161.163403] ? nfsd_svc+0x380/0x380 [ 161.164137] ? svc_printk+0x160/0x160 [ 161.164846] ? svc_xprt_do_enqueue.part.0+0x365/0x380 [ 161.165808] ? nfsd_svc+0x380/0x380 [ 161.166523] ? rcu_is_watching+0x23/0x40 [ 161.167309] svc_process+0x1a5/0x200 [ 161.168019] nfsd+0x1f5/0x380 [ 161.168663] ? nfsd_shutdown_threads+0x260/0x260 [ 161.169554] kthread+0x1c4/0x210 [ 161.170224] ? kthread_insert_work_sanity_check+0x80/0x80 [ 161.171246] ret_from_fork+0x1f/0x30Show less

In the Linux kernel, the following vulnerability has been resolved: i3c: master: svc: Fix use after free vulnerability in svc_i3c_master Driver Due to Race Condition In the svc_i3c_master_probe function, &master->hj_work is bound with svc_i3c_master_hj_work, &master->ibi_work is bound with svc_i3c_master_ibi_work. And svc_i3c_master_ibi_work can start the hj_work, svc_i3c_master_irq_handler can start the ibi_work. If we remove the module which will call svc_i3c_master_remove to make cleanup, it will free master->base through i3c_master_unregister while the work mentioned above will be used. The sequence of operations that may lead to a UAF bug is as follows: CPU0 CPU1 | svc_i3c_master_hj_work svc_i3c_master_remove | i3c_master_unregister(&master->base)| device_unregister(&master->dev) | device_release | //free master->base | | i3c_master_do_daa(&master->base) | //use master->base Fix it by ensuring that the work is canceled before proceeding with the cleanup in svc_i3c_master_remove.Show less

In the Linux kernel, the following vulnerability has been resolved: mm/filemap: fix filemap_get_folios_contig THP panic Patch series "memfd-pin huge page fixes". Fix multiple bugs that occur when using memfd_pin_folios with hugetlb pages and THP. The hugetlb bugs only bite when the page is not yet faulted in when memfd_pin_folios is called. The THP bug bites when the starting offset passed to memfd_pin_folios is not huge page aligned. See the commit messages for details. This patch (of 5): memfd_pin_folios on memory backed by THP panics if the requested start offset is not huge page aligned: BUG: kernel NULL pointer dereference, address: 0000000000000036 RIP: 0010:filemap_get_folios_contig+0xdf/0x290 RSP: 0018:ffffc9002092fbe8 EFLAGS: 00010202 RAX: 0000000000000002 RBX: 0000000000000002 RCX: 0000000000000002 The fault occurs here, because xas_load returns a folio with value 2: filemap_get_folios_contig() for (folio = xas_load(&xas); folio && xas.xa_index <= end; folio = xas_next(&xas)) { ... if (!folio_try_get(folio)) <-- BOOM "2" is an xarray sibling entry. We get it because memfd_pin_folios does not round the indices passed to filemap_get_folios_contig to huge page boundaries for THP, so we load from the middle of a huge page range see a sibling. (It does round for hugetlbfs, at the is_file_hugepages test). To fix, if the folio is a sibling, then return the next index as the starting point for the next call to filemap_get_folios_contig.Show less

In the Linux kernel, the following vulnerability has been resolved: mm/gup: fix memfd_pin_folios alloc race panic If memfd_pin_folios tries to create a hugetlb page, but someone else already did, then folio gets the value -EEXIST here: folio = memfd_alloc_folio(memfd, start_idx); if (IS_ERR(folio)) { ret = PTR_ERR(folio); if (ret != -EEXIST) goto err; then on the next trip through the "while start_idx" loop we panic here: if (folio) { folio_put(folio); To fix, set the folio to NULL on error.Show less

In the Linux kernel, the following vulnerability has been resolved: Input: adp5589-keys - fix NULL pointer dereference We register a devm action to call adp5589_clear_config() and then pass the i2c client as argument so that we can call i2c_get_clientdata() in order to get our device object. However, i2c_set_clientdata() is only being set at the end of the probe function which means that we'll get a NULL pointer dereference in case the probe function fails early.Show less