Linux Kernel

In the Linux kernel, the following vulnerability has been resolved: phy: qcom: qmp-usbc: fix NULL-deref on runtime suspend Commit 413db06c05e7 ("phy: qcom-qmp-usb: clean up probe initialisation") removed most users of the platform device driver data from the qcom-qmp-usb driver, but mistakenly also removed the initialisation despite the data still being used in the runtime PM callbacks. This bug was later reproduced when the driver was copied to create the qmp-usbc driver. Restore the driver data initialisation at probe to avoid a NULL-pointer dereference on runtime suspend. Apparently no one uses runtime PM, which currently needs to be enabled manually through sysfs, with these drivers.Show less

In the Linux kernel, the following vulnerability has been resolved: wifi: ath10k: Fix memory leak in management tx In the current logic, memory is allocated for storing the MSDU context during management packet TX but this memory is not being freed during management TX completion. Similar leaks are seen in the management TX cleanup logic. Kmemleak reports this problem as below, unreferenced object 0xffffff80b64ed250 (size 16): comm "kworker/u16:7", pid 148, jiffies 4294687130 (age 714.199s) hex dump (first 16 bytes): 00 2b d8 d8 80 ff ff ff c4 74 e9 fd 07 00 00 00 .+.......t...... backtrace: [<ffffffe6e7b245dc>] __kmem_cache_alloc_node+0x1e4/0x2d8 [<ffffffe6e7adde88>] kmalloc_trace+0x48/0x110 [<ffffffe6bbd765fc>] ath10k_wmi_tlv_op_gen_mgmt_tx_send+0xd4/0x1d8 [ath10k_core] [<ffffffe6bbd3eed4>] ath10k_mgmt_over_wmi_tx_work+0x134/0x298 [ath10k_core] [<ffffffe6e78d5974>] process_scheduled_works+0x1ac/0x400 [<ffffffe6e78d60b8>] worker_thread+0x208/0x328 [<ffffffe6e78dc890>] kthread+0x100/0x1c0 [<ffffffe6e78166c0>] ret_from_fork+0x10/0x20 Free the memory during completion and cleanup to fix the leak. Protect the mgmt_pending_tx idr_remove() operation in ath10k_wmi_tlv_op_cleanup_mgmt_tx_send() using ar->data_lock similar to other instances. Tested-on: WCN3990 hw1.0 SNOC WLAN.HL.2.0-01387-QCAHLSWMTPLZ-1Show less

In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: clear wdev->cqm_config pointer on free When we free wdev->cqm_config when unregistering, we also need to clear out the pointer since the same wdev/netdev may get re-registered in another network namespace, then destroyed later, running this code again, which results in a double-free.Show less

In the Linux kernel, the following vulnerability has been resolved: wifi: iwlegacy: Clear stale interrupts before resuming device iwl4965 fails upon resume from hibernation on my laptop. The reason seems to be a stale interrupt which isn't being cleared out before interrupts are enabled. We end up with a race beween the resume trying to bring things back up, and the restart work (queued form the interrupt handler) trying to bring things down. Eventually the whole thing blows up. Fix the problem by clearing out any stale interrupts before interrupts get enabled during resume. Here's a debug log of the indicent: [ 12.042589] ieee80211 phy0: il_isr ISR inta 0x00000080, enabled 0xaa00008b, fh 0x00000000 [ 12.042625] ieee80211 phy0: il4965_irq_tasklet inta 0x00000080, enabled 0x00000000, fh 0x00000000 [ 12.042651] iwl4965 0000:10:00.0: RF_KILL bit toggled to enable radio. [ 12.042653] iwl4965 0000:10:00.0: On demand firmware reload [ 12.042690] ieee80211 phy0: il4965_irq_tasklet End inta 0x00000000, enabled 0xaa00008b, fh 0x00000000, flags 0x00000282 [ 12.052207] ieee80211 phy0: il4965_mac_start enter [ 12.052212] ieee80211 phy0: il_prep_station Add STA to driver ID 31: ff:ff:ff:ff:ff:ff [ 12.052244] ieee80211 phy0: il4965_set_hw_ready hardware ready [ 12.052324] ieee80211 phy0: il_apm_init Init card's basic functions [ 12.052348] ieee80211 phy0: il_apm_init L1 Enabled; Disabling L0S [ 12.055727] ieee80211 phy0: il4965_load_bsm Begin load bsm [ 12.056140] ieee80211 phy0: il4965_verify_bsm Begin verify bsm [ 12.058642] ieee80211 phy0: il4965_verify_bsm BSM bootstrap uCode image OK [ 12.058721] ieee80211 phy0: il4965_load_bsm BSM write complete, poll 1 iterations [ 12.058734] ieee80211 phy0: __il4965_up iwl4965 is coming up [ 12.058737] ieee80211 phy0: il4965_mac_start Start UP work done. [ 12.058757] ieee80211 phy0: __il4965_down iwl4965 is going down [ 12.058761] ieee80211 phy0: il_scan_cancel_timeout Scan cancel timeout [ 12.058762] ieee80211 phy0: il_do_scan_abort Not performing scan to abort [ 12.058765] ieee80211 phy0: il_clear_ucode_stations Clearing ucode stations in driver [ 12.058767] ieee80211 phy0: il_clear_ucode_stations No active stations found to be cleared [ 12.058819] ieee80211 phy0: _il_apm_stop Stop card, put in low power state [ 12.058827] ieee80211 phy0: _il_apm_stop_master stop master [ 12.058864] ieee80211 phy0: il4965_clear_free_frames 0 frames on pre-allocated heap on clear. [ 12.058869] ieee80211 phy0: Hardware restart was requested [ 16.132299] iwl4965 0000:10:00.0: START_ALIVE timeout after 4000ms. [ 16.132303] ------------[ cut here ]------------ [ 16.132304] Hardware became unavailable upon resume. This could be a software issue prior to suspend or a hardware issue. [ 16.132338] WARNING: CPU: 0 PID: 181 at net/mac80211/util.c:1826 ieee80211_reconfig+0x8f/0x14b0 [mac80211] [ 16.132390] Modules linked in: ctr ccm sch_fq_codel xt_tcpudp xt_multiport xt_state iptable_filter iptable_nat nf_nat nf_conntrack nf_defrag_ipv4 ip_tables x_tables binfmt_misc joydev mousedev btusb btrtl btintel btbcm bluetooth ecdh_generic ecc iTCO_wdt i2c_dev iwl4965 iwlegacy coretemp snd_hda_codec_analog pcspkr psmouse mac80211 snd_hda_codec_generic libarc4 sdhci_pci cqhci sha256_generic sdhci libsha256 firewire_ohci snd_hda_intel snd_intel_dspcfg mmc_core snd_hda_codec snd_hwdep firewire_core led_class iosf_mbi snd_hda_core uhci_hcd lpc_ich crc_itu_t cfg80211 ehci_pci ehci_hcd snd_pcm usbcore mfd_core rfkill snd_timer snd usb_common soundcore video parport_pc parport intel_agp wmi intel_gtt backlight e1000e agpgart evdev [ 16.132456] CPU: 0 UID: 0 PID: 181 Comm: kworker/u8:6 Not tainted 6.11.0-cl+ #143 [ 16.132460] Hardware name: Hewlett-Packard HP Compaq 6910p/30BE, BIOS 68MCU Ver. F.19 07/06/2010 [ 16.132463] Workqueue: async async_run_entry_fn [ 16.132469] RIP: 0010:ieee80211_reconfig+0x8f/0x14b0 [mac80211] [ 16.132501] Code: da 02 00 0 ---truncated---Show less

In the Linux kernel, the following vulnerability has been resolved: staging: iio: frequency: ad9832: fix division by zero in ad9832_calc_freqreg() In the ad9832_write_frequency() function, clk_get_rate() might return 0. This can lead to a division by zero when calling ad9832_calc_freqreg(). The check if (fout > (clk_get_rate(st->mclk) / 2)) does not protect against the case when fout is 0. The ad9832_write_frequency() function is called from ad9832_write(), and fout is derived from a text buffer, which can contain any value.Show less

In the Linux kernel, the following vulnerability has been resolved: iio: adc: ad7124: fix division by zero in ad7124_set_channel_odr() In the ad7124_write_raw() function, parameter val can potentially be zero. This may lead to a division by zero when DIV_ROUND_CLOSEST() is called within ad7124_set_channel_odr(). The ad7124_write_raw() function is invoked through the sequence: iio_write_channel_raw() -> iio_write_channel_attribute() -> iio_channel_write(), with no checks in place to ensure val is non-zero.Show less

In the Linux kernel, the following vulnerability has been resolved: iio: gts-helper: Fix memory leaks in iio_gts_build_avail_scale_table() modprobe iio-test-gts and rmmod it, then the following memory leak occurs: unreferenced object 0xffffff80c810be00 (size 64): comm "kunit_try_catch", pid 1654, jiffies 4294913981 hex dump (first 32 bytes): 02 00 00 00 08 00 00 00 20 00 00 00 40 00 00 00 ........ ...@... 80 00 00 00 00 02 00 00 00 04 00 00 00 08 00 00 ................ backtrace (crc a63d875e): [<0000000028c1b3c2>] kmemleak_alloc+0x34/0x40 [<000000001d6ecc87>] __kmalloc_noprof+0x2bc/0x3c0 [<00000000393795c1>] devm_iio_init_iio_gts+0x4b4/0x16f4 [<0000000071bb4b09>] 0xffffffdf052a62e0 [<000000000315bc18>] 0xffffffdf052a6488 [<00000000f9dc55b5>] kunit_try_run_case+0x13c/0x3ac [<00000000175a3fd4>] kunit_generic_run_threadfn_adapter+0x80/0xec [<00000000f505065d>] kthread+0x2e8/0x374 [<00000000bbfb0e5d>] ret_from_fork+0x10/0x20 unreferenced object 0xffffff80cbfe9e70 (size 16): comm "kunit_try_catch", pid 1658, jiffies 4294914015 hex dump (first 16 bytes): 10 00 00 00 40 00 00 00 80 00 00 00 00 00 00 00 ....@........... backtrace (crc 857f0cb4): [<0000000028c1b3c2>] kmemleak_alloc+0x34/0x40 [<000000001d6ecc87>] __kmalloc_noprof+0x2bc/0x3c0 [<00000000393795c1>] devm_iio_init_iio_gts+0x4b4/0x16f4 [<0000000071bb4b09>] 0xffffffdf052a62e0 [<000000007d089d45>] 0xffffffdf052a6864 [<00000000f9dc55b5>] kunit_try_run_case+0x13c/0x3ac [<00000000175a3fd4>] kunit_generic_run_threadfn_adapter+0x80/0xec [<00000000f505065d>] kthread+0x2e8/0x374 [<00000000bbfb0e5d>] ret_from_fork+0x10/0x20 ...... It includes 5*5 times "size 64" memory leaks, which correspond to 5 times test_init_iio_gain_scale() calls with gts_test_gains size 10 (10*size(int)) and gts_test_itimes size 5. It also includes 5*1 times "size 16" memory leak, which correspond to one time __test_init_iio_gain_scale() call with gts_test_gains_gain_low size 3 (3*size(int)) and gts_test_itimes size 5. The reason is that the per_time_gains[i] is not freed which is allocated in the "gts->num_itime" for loop in iio_gts_build_avail_scale_table().Show less

In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix kernel bug due to missing clearing of checked flag Syzbot reported that in directory operations after nilfs2 detects filesystem corruption and degrades to read-only, __block_write_begin_int(), which is called to prepare block writes, may fail the BUG_ON check for accesses exceeding the folio/page size, triggering a kernel bug. This was found to be because the "checked" flag of a page/folio was not cleared when it was discarded by nilfs2's own routine, which causes the sanity check of directory entries to be skipped when the directory page/folio is reloaded. So, fix that. This was necessary when the use of nilfs2's own page discard routine was applied to more than just metadata files.Show less

In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix potential deadlock with newly created symlinks Syzbot reported that page_symlink(), called by nilfs_symlink(), triggers memory reclamation involving the filesystem layer, which can result in circular lock dependencies among the reader/writer semaphore nilfs->ns_segctor_sem, s_writers percpu_rwsem (intwrite) and the fs_reclaim pseudo lock. This is because after commit 21fc61c73c39 ("don't put symlink bodies in pagecache into highmem"), the gfp flags of the page cache for symbolic links are overwritten to GFP_KERNEL via inode_nohighmem(). This is not a problem for symlinks read from the backing device, because the __GFP_FS flag is dropped after inode_nohighmem() is called. However, when a new symlink is created with nilfs_symlink(), the gfp flags remain overwritten to GFP_KERNEL. Then, memory allocation called from page_symlink() etc. triggers memory reclamation including the FS layer, which may call nilfs_evict_inode() or nilfs_dirty_inode(). And these can cause a deadlock if they are called while nilfs->ns_segctor_sem is held: Fix this issue by dropping the __GFP_FS flag from the page cache GFP flags of newly created symlinks in the same way that nilfs_new_inode() and __nilfs_read_inode() do, as a workaround until we adopt nofs allocation scope consistently or improve the locking constraints.Show less

In the Linux kernel, the following vulnerability has been resolved: thunderbolt: Fix KASAN reported stack out-of-bounds read in tb_retimer_scan() KASAN reported following issue: BUG: KASAN: stack-out-of-bounds in tb_retimer_scan+0xffe/0x1550 [thunderbolt] Read of size 4 at addr ffff88810111fc1c by task kworker/u56:0/11 CPU: 0 UID: 0 PID: 11 Comm: kworker/u56:0 Tainted: G U 6.11.0+ #1387 Tainted: [U]=USER Workqueue: thunderbolt0 tb_handle_hotplug [thunderbolt] Call Trace: <TASK> dump_stack_lvl+0x6c/0x90 print_report+0xd1/0x630 kasan_report+0xdb/0x110 __asan_report_load4_noabort+0x14/0x20 tb_retimer_scan+0xffe/0x1550 [thunderbolt] tb_scan_port+0xa6f/0x2060 [thunderbolt] tb_handle_hotplug+0x17b1/0x3080 [thunderbolt] process_one_work+0x626/0x1100 worker_thread+0x6c8/0xfa0 kthread+0x2c8/0x3a0 ret_from_fork+0x3a/0x80 ret_from_fork_asm+0x1a/0x30 This happens because the loop variable still gets incremented by one so max becomes 3 instead of 2, and this makes the second loop read past the the array declared on the stack. Fix this by assigning to max directly in the loop body.Show less

In the Linux kernel, the following vulnerability has been resolved: cxl/port: Fix use-after-free, permit out-of-order decoder shutdown In support of investigating an initialization failure report [1], cxl_test was updated to register mock memory-devices after the mock root-port/bus device had been registered. That led to cxl_test crashing with a use-after-free bug with the following signature: cxl_port_attach_region: cxl region3: cxl_host_bridge.0:port3 decoder3.0 add: mem0:decoder7.0 @ 0 next: cxl_switch_uport.0 nr_eps: 1 nr_targets: 1 cxl_port_attach_region: cxl region3: cxl_host_bridge.0:port3 decoder3.0 add: mem4:decoder14.0 @ 1 next: cxl_switch_uport.0 nr_eps: 2 nr_targets: 1 cxl_port_setup_targets: cxl region3: cxl_switch_uport.0:port6 target[0] = cxl_switch_dport.0 for mem0:decoder7.0 @ 0 1) cxl_port_setup_targets: cxl region3: cxl_switch_uport.0:port6 target[1] = cxl_switch_dport.4 for mem4:decoder14.0 @ 1 [..] cxld_unregister: cxl decoder14.0: cxl_region_decode_reset: cxl_region region3: mock_decoder_reset: cxl_port port3: decoder3.0 reset 2) mock_decoder_reset: cxl_port port3: decoder3.0: out of order reset, expected decoder3.1 cxl_endpoint_decoder_release: cxl decoder14.0: [..] cxld_unregister: cxl decoder7.0: 3) cxl_region_decode_reset: cxl_region region3: Oops: general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b6bc3: 0000 [#1] PREEMPT SMP PTI [..] RIP: 0010:to_cxl_port+0x8/0x60 [cxl_core] [..] Call Trace: <TASK> cxl_region_decode_reset+0x69/0x190 [cxl_core] cxl_region_detach+0xe8/0x210 [cxl_core] cxl_decoder_kill_region+0x27/0x40 [cxl_core] cxld_unregister+0x5d/0x60 [cxl_core] At 1) a region has been established with 2 endpoint decoders (7.0 and 14.0). Those endpoints share a common switch-decoder in the topology (3.0). At teardown, 2), decoder14.0 is the first to be removed and hits the "out of order reset case" in the switch decoder. The effect though is that region3 cleanup is aborted leaving it in-tact and referencing decoder14.0. At 3) the second attempt to teardown region3 trips over the stale decoder14.0 object which has long since been deleted. The fix here is to recognize that the CXL specification places no mandate on in-order shutdown of switch-decoders, the driver enforces in-order allocation, and hardware enforces in-order commit. So, rather than fail and leave objects dangling, always remove them. In support of making cxl_region_decode_reset() always succeed, cxl_region_invalidate_memregion() failures are turned into warnings. Crashing the kernel is ok there since system integrity is at risk if caches cannot be managed around physical address mutation events like CXL region destruction. A new device_for_each_child_reverse_from() is added to cleanup port->commit_end after all dependent decoders have been disabled. In other words if decoders are allocated 0->1->2 and disabled 1->2->0 then port->commit_end only decrements from 2 after 2 has been disabled, and it decrements all the way to zero since 1 was disabled previously.Show less

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix error propagation of split bios The purpose of btrfs_bbio_propagate_error() shall be propagating an error of split bio to its original btrfs_bio, and tell the error to the upper layer. However, it's not working well on some cases. * Case 1. Immediate (or quick) end_bio with an error When btrfs sends btrfs_bio to mirrored devices, btrfs calls btrfs_bio_end_io() when all the mirroring bios are completed. If that btrfs_bio was split, it is from btrfs_clone_bioset and its end_io function is btrfs_orig_write_end_io. For this case, btrfs_bbio_propagate_error() accesses the orig_bbio's bio context to increase the error count. That works well in most cases. However, if the end_io is called enough fast, orig_bbio's (remaining part after split) bio context may not be properly set at that time. Since the bio context is set when the orig_bbio (the last btrfs_bio) is sent to devices, that might be too late for earlier split btrfs_bio's completion. That will result in NULL pointer dereference. That bug is easily reproducible by running btrfs/146 on zoned devices [1] and it shows the following trace. [1] You need raid-stripe-tree feature as it create "-d raid0 -m raid1" FS. BUG: kernel NULL pointer dereference, address: 0000000000000020 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: Oops: 0000 [#1] PREEMPT SMP PTI CPU: 1 UID: 0 PID: 13 Comm: kworker/u32:1 Not tainted 6.11.0-rc7-BTRFS-ZNS+ #474 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 Workqueue: writeback wb_workfn (flush-btrfs-5) RIP: 0010:btrfs_bio_end_io+0xae/0xc0 [btrfs] BTRFS error (device dm-0): bdev /dev/mapper/error-test errs: wr 2, rd 0, flush 0, corrupt 0, gen 0 RSP: 0018:ffffc9000006f248 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff888005a7f080 RCX: ffffc9000006f1dc RDX: 0000000000000000 RSI: 000000000000000a RDI: ffff888005a7f080 RBP: ffff888011dfc540 R08: 0000000000000000 R09: 0000000000000001 R10: ffffffff82e508e0 R11: 0000000000000005 R12: ffff88800ddfbe58 R13: ffff888005a7f080 R14: ffff888005a7f158 R15: ffff888005a7f158 FS: 0000000000000000(0000) GS:ffff88803ea80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000020 CR3: 0000000002e22006 CR4: 0000000000370ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ? __die_body.cold+0x19/0x26 ? page_fault_oops+0x13e/0x2b0 ? _printk+0x58/0x73 ? do_user_addr_fault+0x5f/0x750 ? exc_page_fault+0x76/0x240 ? asm_exc_page_fault+0x22/0x30 ? btrfs_bio_end_io+0xae/0xc0 [btrfs] ? btrfs_log_dev_io_error+0x7f/0x90 [btrfs] btrfs_orig_write_end_io+0x51/0x90 [btrfs] dm_submit_bio+0x5c2/0xa50 [dm_mod] ? find_held_lock+0x2b/0x80 ? blk_try_enter_queue+0x90/0x1e0 __submit_bio+0xe0/0x130 ? ktime_get+0x10a/0x160 ? lockdep_hardirqs_on+0x74/0x100 submit_bio_noacct_nocheck+0x199/0x410 btrfs_submit_bio+0x7d/0x150 [btrfs] btrfs_submit_chunk+0x1a1/0x6d0 [btrfs] ? lockdep_hardirqs_on+0x74/0x100 ? __folio_start_writeback+0x10/0x2c0 btrfs_submit_bbio+0x1c/0x40 [btrfs] submit_one_bio+0x44/0x60 [btrfs] submit_extent_folio+0x13f/0x330 [btrfs] ? btrfs_set_range_writeback+0xa3/0xd0 [btrfs] extent_writepage_io+0x18b/0x360 [btrfs] extent_write_locked_range+0x17c/0x340 [btrfs] ? __pfx_end_bbio_data_write+0x10/0x10 [btrfs] run_delalloc_cow+0x71/0xd0 [btrfs] btrfs_run_delalloc_range+0x176/0x500 [btrfs] ? find_lock_delalloc_range+0x119/0x260 [btrfs] writepage_delalloc+0x2ab/0x480 [btrfs] extent_write_cache_pages+0x236/0x7d0 [btrfs] btrfs_writepages+0x72/0x130 [btrfs] do_writepages+0xd4/0x240 ? find_held_lock+0x2b/0x80 ? wbc_attach_and_unlock_inode+0x12c/0x290 ? wbc_attach_and_unlock_inode+0x12c/0x29 ---truncated---Show less

In the Linux kernel, the following vulnerability has been resolved: spi: spi-fsl-dspi: Fix crash when not using GPIO chip select Add check for the return value of spi_get_csgpiod() to avoid passing a NULL pointer to gpiod_direction_output(), preventing a crash when GPIO chip select is not used. Fix below crash: [ 4.251960] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [ 4.260762] Mem abort info: [ 4.263556] ESR = 0x0000000096000004 [ 4.267308] EC = 0x25: DABT (current EL), IL = 32 bits [ 4.272624] SET = 0, FnV = 0 [ 4.275681] EA = 0, S1PTW = 0 [ 4.278822] FSC = 0x04: level 0 translation fault [ 4.283704] Data abort info: [ 4.286583] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 [ 4.292074] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 4.297130] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 4.302445] [0000000000000000] user address but active_mm is swapper [ 4.308805] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP [ 4.315072] Modules linked in: [ 4.318124] CPU: 2 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.12.0-rc4-next-20241023-00008-ga20ec42c5fc1 #359 [ 4.328130] Hardware name: LS1046A QDS Board (DT) [ 4.332832] pstate: 40000005 (nZcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 4.339794] pc : gpiod_direction_output+0x34/0x5c [ 4.344505] lr : gpiod_direction_output+0x18/0x5c [ 4.349208] sp : ffff80008003b8f0 [ 4.352517] x29: ffff80008003b8f0 x28: 0000000000000000 x27: ffffc96bcc7e9068 [ 4.359659] x26: ffffc96bcc6e00b0 x25: ffffc96bcc598398 x24: ffff447400132810 [ 4.366800] x23: 0000000000000000 x22: 0000000011e1a300 x21: 0000000000020002 [ 4.373940] x20: 0000000000000000 x19: 0000000000000000 x18: ffffffffffffffff [ 4.381081] x17: ffff44740016e600 x16: 0000000500000003 x15: 0000000000000007 [ 4.388221] x14: 0000000000989680 x13: 0000000000020000 x12: 000000000000001e [ 4.395362] x11: 0044b82fa09b5a53 x10: 0000000000000019 x9 : 0000000000000008 [ 4.402502] x8 : 0000000000000002 x7 : 0000000000000007 x6 : 0000000000000000 [ 4.409641] x5 : 0000000000000200 x4 : 0000000002000000 x3 : 0000000000000000 [ 4.416781] x2 : 0000000000022202 x1 : 0000000000000000 x0 : 0000000000000000 [ 4.423921] Call trace: [ 4.426362] gpiod_direction_output+0x34/0x5c (P) [ 4.431067] gpiod_direction_output+0x18/0x5c (L) [ 4.435771] dspi_setup+0x220/0x334Show less

In the Linux kernel, the following vulnerability has been resolved: sched/numa: Fix the potential null pointer dereference in task_numa_work() When running stress-ng-vm-segv test, we found a null pointer dereference error in task_numa_work(). Here is the backtrace: [323676.066985] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020 ...... [323676.067108] CPU: 35 PID: 2694524 Comm: stress-ng-vm-se ...... [323676.067113] pstate: 23401009 (nzCv daif +PAN -UAO +TCO +DIT +SSBS BTYPE=--) [323676.067115] pc : vma_migratable+0x1c/0xd0 [323676.067122] lr : task_numa_work+0x1ec/0x4e0 [323676.067127] sp : ffff8000ada73d20 [323676.067128] x29: ffff8000ada73d20 x28: 0000000000000000 x27: 000000003e89f010 [323676.067130] x26: 0000000000080000 x25: ffff800081b5c0d8 x24: ffff800081b27000 [323676.067133] x23: 0000000000010000 x22: 0000000104d18cc0 x21: ffff0009f7158000 [323676.067135] x20: 0000000000000000 x19: 0000000000000000 x18: ffff8000ada73db8 [323676.067138] x17: 0001400000000000 x16: ffff800080df40b0 x15: 0000000000000035 [323676.067140] x14: ffff8000ada73cc8 x13: 1fffe0017cc72001 x12: ffff8000ada73cc8 [323676.067142] x11: ffff80008001160c x10: ffff000be639000c x9 : ffff8000800f4ba4 [323676.067145] x8 : ffff000810375000 x7 : ffff8000ada73974 x6 : 0000000000000001 [323676.067147] x5 : 0068000b33e26707 x4 : 0000000000000001 x3 : ffff0009f7158000 [323676.067149] x2 : 0000000000000041 x1 : 0000000000004400 x0 : 0000000000000000 [323676.067152] Call trace: [323676.067153] vma_migratable+0x1c/0xd0 [323676.067155] task_numa_work+0x1ec/0x4e0 [323676.067157] task_work_run+0x78/0xd8 [323676.067161] do_notify_resume+0x1ec/0x290 [323676.067163] el0_svc+0x150/0x160 [323676.067167] el0t_64_sync_handler+0xf8/0x128 [323676.067170] el0t_64_sync+0x17c/0x180 [323676.067173] Code: d2888001 910003fd f9000bf3 aa0003f3 (f9401000) [323676.067177] SMP: stopping secondary CPUs [323676.070184] Starting crashdump kernel... stress-ng-vm-segv in stress-ng is used to stress test the SIGSEGV error handling function of the system, which tries to cause a SIGSEGV error on return from unmapping the whole address space of the child process. Normally this program will not cause kernel crashes. But before the munmap system call returns to user mode, a potential task_numa_work() for numa balancing could be added and executed. In this scenario, since the child process has no vma after munmap, the vma_next() in task_numa_work() will return a null pointer even if the vma iterator restarts from 0. Recheck the vma pointer before dereferencing it in task_numa_work().Show less

In the Linux kernel, the following vulnerability has been resolved: iov_iter: fix copy_page_from_iter_atomic() if KMAP_LOCAL_FORCE_MAP generic/077 on x86_32 CONFIG_DEBUG_KMAP_LOCAL_FORCE_MAP=y with highmem, on huge=always tmpfs, issues a warning and then hangs (interruptibly): WARNING: CPU: 5 PID: 3517 at mm/highmem.c:622 kunmap_local_indexed+0x62/0xc9 CPU: 5 UID: 0 PID: 3517 Comm: cp Not tainted 6.12.0-rc4 #2 ... copy_page_from_iter_atomic+0xa6/0x5ec generic_perform_write+0xf6/0x1b4 shmem_file_write_iter+0x54/0x67 Fix copy_page_from_iter_atomic() by limiting it in that case (include/linux/skbuff.h skb_frag_must_loop() does similar). But going forward, perhaps CONFIG_DEBUG_KMAP_LOCAL_FORCE_MAP is too surprising, has outlived its usefulness, and should just be removed?Show less

In the Linux kernel, the following vulnerability has been resolved: drm/amd/pm: Vangogh: Fix kernel memory out of bounds write KASAN reports that the GPU metrics table allocated in vangogh_tables_init() is not large enough for the memset done in smu_cmn_init_soft_gpu_metrics(). Condensed report follows: [ 33.861314] BUG: KASAN: slab-out-of-bounds in smu_cmn_init_soft_gpu_metrics+0x73/0x200 [amdgpu] [ 33.861799] Write of size 168 at addr ffff888129f59500 by task mangoapp/1067 ... [ 33.861808] CPU: 6 UID: 1000 PID: 1067 Comm: mangoapp Tainted: G W 6.12.0-rc4 #356 1a56f59a8b5182eeaf67eb7cb8b13594dd23b544 [ 33.861816] Tainted: [W]=WARN [ 33.861818] Hardware name: Valve Galileo/Galileo, BIOS F7G0107 12/01/2023 [ 33.861822] Call Trace: [ 33.861826] <TASK> [ 33.861829] dump_stack_lvl+0x66/0x90 [ 33.861838] print_report+0xce/0x620 [ 33.861853] kasan_report+0xda/0x110 [ 33.862794] kasan_check_range+0xfd/0x1a0 [ 33.862799] __asan_memset+0x23/0x40 [ 33.862803] smu_cmn_init_soft_gpu_metrics+0x73/0x200 [amdgpu 13b1bc364ec578808f676eba412c20eaab792779] [ 33.863306] vangogh_get_gpu_metrics_v2_4+0x123/0xad0 [amdgpu 13b1bc364ec578808f676eba412c20eaab792779] [ 33.864257] vangogh_common_get_gpu_metrics+0xb0c/0xbc0 [amdgpu 13b1bc364ec578808f676eba412c20eaab792779] [ 33.865682] amdgpu_dpm_get_gpu_metrics+0xcc/0x110 [amdgpu 13b1bc364ec578808f676eba412c20eaab792779] [ 33.866160] amdgpu_get_gpu_metrics+0x154/0x2d0 [amdgpu 13b1bc364ec578808f676eba412c20eaab792779] [ 33.867135] dev_attr_show+0x43/0xc0 [ 33.867147] sysfs_kf_seq_show+0x1f1/0x3b0 [ 33.867155] seq_read_iter+0x3f8/0x1140 [ 33.867173] vfs_read+0x76c/0xc50 [ 33.867198] ksys_read+0xfb/0x1d0 [ 33.867214] do_syscall_64+0x90/0x160 ... [ 33.867353] Allocated by task 378 on cpu 7 at 22.794876s: [ 33.867358] kasan_save_stack+0x33/0x50 [ 33.867364] kasan_save_track+0x17/0x60 [ 33.867367] __kasan_kmalloc+0x87/0x90 [ 33.867371] vangogh_init_smc_tables+0x3f9/0x840 [amdgpu] [ 33.867835] smu_sw_init+0xa32/0x1850 [amdgpu] [ 33.868299] amdgpu_device_init+0x467b/0x8d90 [amdgpu] [ 33.868733] amdgpu_driver_load_kms+0x19/0xf0 [amdgpu] [ 33.869167] amdgpu_pci_probe+0x2d6/0xcd0 [amdgpu] [ 33.869608] local_pci_probe+0xda/0x180 [ 33.869614] pci_device_probe+0x43f/0x6b0 Empirically we can confirm that the former allocates 152 bytes for the table, while the latter memsets the 168 large block. Root cause appears that when GPU metrics tables for v2_4 parts were added it was not considered to enlarge the table to fit. The fix in this patch is rather "brute force" and perhaps later should be done in a smarter way, by extracting and consolidating the part version to size logic to a common helper, instead of brute forcing the largest possible allocation. Nevertheless, for now this works and fixes the out of bounds write. v2: * Drop impossible v3_0 case. (Mario) (cherry picked from commit 0880f58f9609f0200483a49429af0f050d281703)Show less

In the Linux kernel, the following vulnerability has been resolved: fork: do not invoke uffd on fork if error occurs Patch series "fork: do not expose incomplete mm on fork". During fork we may place the virtual memory address space into an inconsistent state before the fork operation is complete. In addition, we may encounter an error during the fork operation that indicates that the virtual memory address space is invalidated. As a result, we should not be exposing it in any way to external machinery that might interact with the mm or VMAs, machinery that is not designed to deal with incomplete state. We specifically update the fork logic to defer khugepaged and ksm to the end of the operation and only to be invoked if no error arose, and disallow uffd from observing fork events should an error have occurred. This patch (of 2): Currently on fork we expose the virtual address space of a process to userland unconditionally if uffd is registered in VMAs, regardless of whether an error arose in the fork. This is performed in dup_userfaultfd_complete() which is invoked unconditionally, and performs two duties - invoking registered handlers for the UFFD_EVENT_FORK event via dup_fctx(), and clearing down userfaultfd_fork_ctx objects established in dup_userfaultfd(). This is problematic, because the virtual address space may not yet be correctly initialised if an error arose. The change in commit d24062914837 ("fork: use __mt_dup() to duplicate maple tree in dup_mmap()") makes this more pertinent as we may be in a state where entries in the maple tree are not yet consistent. We address this by, on fork error, ensuring that we roll back state that we would otherwise expect to clean up through the event being handled by userland and perform the memory freeing duty otherwise performed by dup_userfaultfd_complete(). We do this by implementing a new function, dup_userfaultfd_fail(), which performs the same loop, only decrementing reference counts. Note that we perform mmgrab() on the parent and child mm's, however userfaultfd_ctx_put() will mmdrop() this once the reference count drops to zero, so we will avoid memory leaks correctly here.Show less

In the Linux kernel, the following vulnerability has been resolved: ocfs2: pass u64 to ocfs2_truncate_inline maybe overflow Syzbot reported a kernel BUG in ocfs2_truncate_inline. There are two reasons for this: first, the parameter value passed is greater than ocfs2_max_inline_data_with_xattr, second, the start and end parameters of ocfs2_truncate_inline are "unsigned int". So, we need to add a sanity check for byte_start and byte_len right before ocfs2_truncate_inline() in ocfs2_remove_inode_range(), if they are greater than ocfs2_max_inline_data_with_xattr return -EINVAL.Show less

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix use-after-free of block device file in __btrfs_free_extra_devids() Mounting btrfs from two images (which have the same one fsid and two different dev_uuids) in certain executing order may trigger an UAF for variable 'device->bdev_file' in __btrfs_free_extra_devids(). And following are the details: 1. Attach image_1 to loop0, attach image_2 to loop1, and scan btrfs devices by ioctl(BTRFS_IOC_SCAN_DEV): / btrfs_device_1 → loop0 fs_device \ btrfs_device_2 → loop1 2. mount /dev/loop0 /mnt btrfs_open_devices btrfs_device_1->bdev_file = btrfs_get_bdev_and_sb(loop0) btrfs_device_2->bdev_file = btrfs_get_bdev_and_sb(loop1) btrfs_fill_super open_ctree fail: btrfs_close_devices // -ENOMEM btrfs_close_bdev(btrfs_device_1) fput(btrfs_device_1->bdev_file) // btrfs_device_1->bdev_file is freed btrfs_close_bdev(btrfs_device_2) fput(btrfs_device_2->bdev_file) 3. mount /dev/loop1 /mnt btrfs_open_devices btrfs_get_bdev_and_sb(&bdev_file) // EIO, btrfs_device_1->bdev_file is not assigned, // which points to a freed memory area btrfs_device_2->bdev_file = btrfs_get_bdev_and_sb(loop1) btrfs_fill_super open_ctree btrfs_free_extra_devids if (btrfs_device_1->bdev_file) fput(btrfs_device_1->bdev_file) // UAF ! Fix it by setting 'device->bdev_file' as 'NULL' after closing the btrfs_device in btrfs_close_one_device().Show less