In the Linux kernel, the following vulnerability has been resolved:
drm/xe: Fix possible exec queue leak in exec IOCTL
In a couple of places after an exec queue is looked up the exec IOCTL
returns on input errors witho...Show moreIn the Linux kernel, the following vulnerability has been resolved:
drm/xe: Fix possible exec queue leak in exec IOCTL
In a couple of places after an exec queue is looked up the exec IOCTL
returns on input errors without dropping the exec queue ref. Fix this
ensuring the exec queue ref is dropped on input error.
(cherry picked from commit 07064a200b40ac2195cb6b7b779897d9377e5e6f)Show less |
In the Linux kernel, the following vulnerability has been resolved:
drm/xe: Drop VM dma-resv lock on xe_sync_in_fence_get failure in exec IOCTL
Upon failure all locks need to be dropped before returning to the user.
(...Show moreIn the Linux kernel, the following vulnerability has been resolved:
drm/xe: Drop VM dma-resv lock on xe_sync_in_fence_get failure in exec IOCTL
Upon failure all locks need to be dropped before returning to the user.
(cherry picked from commit 7d1a4258e602ffdce529f56686925034c1b3b095)Show less |
In the Linux kernel, the following vulnerability has been resolved:
tpm: Lock TPM chip in tpm_pm_suspend() first
Setting TPM_CHIP_FLAG_SUSPENDED in the end of tpm_pm_suspend() can be racy
according, as this leaves wind...Show moreIn the Linux kernel, the following vulnerability has been resolved:
tpm: Lock TPM chip in tpm_pm_suspend() first
Setting TPM_CHIP_FLAG_SUSPENDED in the end of tpm_pm_suspend() can be racy
according, as this leaves window for tpm_hwrng_read() to be called while
the operation is in progress. The recent bug report gives also evidence of
this behaviour.
Aadress this by locking the TPM chip before checking any chip->flags both
in tpm_pm_suspend() and tpm_hwrng_read(). Move TPM_CHIP_FLAG_SUSPENDED
check inside tpm_get_random() so that it will be always checked only when
the lock is reserved.Show less |
In the Linux kernel, the following vulnerability has been resolved:
drm/imagination: Break an object reference loop
When remaining resources are being cleaned up on driver close,
outstanding VM mappings may result in r...Show moreIn the Linux kernel, the following vulnerability has been resolved:
drm/imagination: Break an object reference loop
When remaining resources are being cleaned up on driver close,
outstanding VM mappings may result in resources being leaked, due
to an object reference loop, as shown below, with each object (or
set of objects) referencing the object below it:
PVR GEM Object
GPU scheduler "finished" fence
GPU scheduler “scheduled” fence
PVR driver “done” fence
PVR Context
PVR VM Context
PVR VM Mappings
PVR GEM Object
The reference that the PVR VM Context has on the VM mappings is a
soft one, in the sense that the freeing of outstanding VM mappings
is done as part of VM context destruction; no reference counts are
involved, as is the case for all the other references in the loop.
To break the reference loop during cleanup, free the outstanding
VM mappings before destroying the PVR Context associated with the
VM context.Show less |
In the Linux kernel, the following vulnerability has been resolved:
usb: typec: qcom-pmic: init value of hdr_len/txbuf_len earlier
If the read of USB_PDPHY_RX_ACKNOWLEDGE_REG failed, then hdr_len and
txbuf_len are unin...Show moreIn the Linux kernel, the following vulnerability has been resolved:
usb: typec: qcom-pmic: init value of hdr_len/txbuf_len earlier
If the read of USB_PDPHY_RX_ACKNOWLEDGE_REG failed, then hdr_len and
txbuf_len are uninitialized. This commit stops to print uninitialized
value and misleading/false data.Show less |
In the Linux kernel, the following vulnerability has been resolved:
virtio_net: Add hash_key_length check
Add hash_key_length check in virtnet_probe() to avoid possible out of
bound errors when setting/reading the hash...Show moreIn the Linux kernel, the following vulnerability has been resolved:
virtio_net: Add hash_key_length check
Add hash_key_length check in virtnet_probe() to avoid possible out of
bound errors when setting/reading the hash key.Show less |
In the Linux kernel, the following vulnerability has been resolved:
media: ar0521: don't overflow when checking PLL values
The PLL checks are comparing 64 bit integers with 32 bit
ones, as reported by Coverity. Dependi...Show moreIn the Linux kernel, the following vulnerability has been resolved:
media: ar0521: don't overflow when checking PLL values
The PLL checks are comparing 64 bit integers with 32 bit
ones, as reported by Coverity. Depending on the values of
the variables, this may underflow.
Fix it ensuring that both sides of the expression are u64.Show less |
In the Linux kernel, the following vulnerability has been resolved:
drm/panthor: Lock XArray when getting entries for the VM
Similar to commit cac075706f29 ("drm/panthor: Fix race when converting
group handle to group...Show moreIn the Linux kernel, the following vulnerability has been resolved:
drm/panthor: Lock XArray when getting entries for the VM
Similar to commit cac075706f29 ("drm/panthor: Fix race when converting
group handle to group object") we need to use the XArray's internal
locking when retrieving a vm pointer from there.
v2: Removed part of the patch that was trying to protect fetching
the heap pointer from XArray, as that operation is protected by
the @pool->lock.Show less |
In the Linux kernel, the following vulnerability has been resolved:
mm/thp: fix deferred split unqueue naming and locking
Recent changes are putting more pressure on THP deferred split queues:
under load revealing long...Show moreIn the Linux kernel, the following vulnerability has been resolved:
mm/thp: fix deferred split unqueue naming and locking
Recent changes are putting more pressure on THP deferred split queues:
under load revealing long-standing races, causing list_del corruptions,
"Bad page state"s and worse (I keep BUGs in both of those, so usually
don't get to see how badly they end up without). The relevant recent
changes being 6.8's mTHP, 6.10's mTHP swapout, and 6.12's mTHP swapin,
improved swap allocation, and underused THP splitting.
Before fixing locking: rename misleading folio_undo_large_rmappable(),
which does not undo large_rmappable, to folio_unqueue_deferred_split(),
which is what it does. But that and its out-of-line __callee are mm
internals of very limited usability: add comment and WARN_ON_ONCEs to
check usage; and return a bool to say if a deferred split was unqueued,
which can then be used in WARN_ON_ONCEs around safety checks (sparing
callers the arcane conditionals in __folio_unqueue_deferred_split()).
Just omit the folio_unqueue_deferred_split() from free_unref_folios(), all
of whose callers now call it beforehand (and if any forget then bad_page()
will tell) - except for its caller put_pages_list(), which itself no
longer has any callers (and will be deleted separately).
Swapout: mem_cgroup_swapout() has been resetting folio->memcg_data 0
without checking and unqueueing a THP folio from deferred split list;
which is unfortunate, since the split_queue_lock depends on the memcg
(when memcg is enabled); so swapout has been unqueueing such THPs later,
when freeing the folio, using the pgdat's lock instead: potentially
corrupting the memcg's list. __remove_mapping() has frozen refcount to 0
here, so no problem with calling folio_unqueue_deferred_split() before
resetting memcg_data.
That goes back to 5.4 commit 87eaceb3faa5 ("mm: thp: make deferred split
shrinker memcg aware"): which included a check on swapcache before adding
to deferred queue, but no check on deferred queue before adding THP to
swapcache. That worked fine with the usual sequence of events in reclaim
(though there were a couple of rare ways in which a THP on deferred queue
could have been swapped out), but 6.12 commit dafff3f4c850 ("mm: split
underused THPs") avoids splitting underused THPs in reclaim, which makes
swapcache THPs on deferred queue commonplace.
Keep the check on swapcache before adding to deferred queue? Yes: it is
no longer essential, but preserves the existing behaviour, and is likely
to be a worthwhile optimization (vmstat showed much more traffic on the
queue under swapping load if the check was removed); update its comment.
Memcg-v1 move (deprecated): mem_cgroup_move_account() has been changing
folio->memcg_data without checking and unqueueing a THP folio from the
deferred list, sometimes corrupting "from" memcg's list, like swapout.
Refcount is non-zero here, so folio_unqueue_deferred_split() can only be
used in a WARN_ON_ONCE to validate the fix, which must be done earlier:
mem_cgroup_move_charge_pte_range() first try to split the THP (splitting
of course unqueues), or skip it if that fails. Not ideal, but moving
charge has been requested, and khugepaged should repair the THP later:
nobody wants new custom unqueueing code just for this deprecated case.
The 87eaceb3faa5 commit did have the code to move from one deferred list
to another (but was not conscious of its unsafety while refcount non-0);
but that was removed by 5.6 commit fac0516b5534 ("mm: thp: don't need care
deferred split queue in memcg charge move path"), which argued that the
existence of a PMD mapping guarantees that the THP cannot be on a deferred
list. As above, false in rare cases, and now commonly false.
Backport to 6.11 should be straightforward. Earlier backports must take
care that other _deferred_list fixes and dependencies are included. There
is not a strong case for backports, but they can fix cornercases.Show less |
In the Linux kernel, the following vulnerability has been resolved:
drm/tegra: Fix NULL vs IS_ERR() check in probe()
The iommu_paging_domain_alloc() function doesn't return NULL pointers,
it returns error pointers. U...Show moreIn the Linux kernel, the following vulnerability has been resolved:
drm/tegra: Fix NULL vs IS_ERR() check in probe()
The iommu_paging_domain_alloc() function doesn't return NULL pointers,
it returns error pointers. Update the check to match.Show less |
In the Linux kernel, the following vulnerability has been resolved:
rpcrdma: Always release the rpcrdma_device's xa_array
Dai pointed out that the xa_init_flags() in rpcrdma_add_one() needs
to have a matching xa_destro...Show moreIn the Linux kernel, the following vulnerability has been resolved:
rpcrdma: Always release the rpcrdma_device's xa_array
Dai pointed out that the xa_init_flags() in rpcrdma_add_one() needs
to have a matching xa_destroy() in rpcrdma_remove_one() to release
underlying memory that the xarray might have accrued during
operation.Show less |
In the Linux kernel, the following vulnerability has been resolved:
iio: gts-helper: Fix memory leaks for the error path of iio_gts_build_avail_scale_table()
If per_time_scales[i] or per_time_gains[i] kcalloc fails in...Show moreIn the Linux kernel, the following vulnerability has been resolved:
iio: gts-helper: Fix memory leaks for the error path of iio_gts_build_avail_scale_table()
If per_time_scales[i] or per_time_gains[i] kcalloc fails in the for loop
of iio_gts_build_avail_scale_table(), the err_free_out will fail to call
kfree() each time when i is reduced to 0, so all the per_time_scales[0]
and per_time_gains[0] will not be freed, which will cause memory leaks.
Fix it by checking if i >= 0.Show less |
In the Linux kernel, the following vulnerability has been resolved:
riscv: Prevent a bad reference count on CPU nodes
When populating cache leaves we previously fetched the CPU device node
at the very beginning. But wh...Show moreIn the Linux kernel, the following vulnerability has been resolved:
riscv: Prevent a bad reference count on CPU nodes
When populating cache leaves we previously fetched the CPU device node
at the very beginning. But when ACPI is enabled we go through a
specific branch which returns early and does not call 'of_node_put' for
the node that was acquired.
Since we are not using a CPU device node for the ACPI code anyways, we
can simply move the initialization of it just passed the ACPI block, and
we are guaranteed to have an 'of_node_put' call for the acquired node.
This prevents a bad reference count of the CPU device node.
Moreover, the previous function did not check for errors when acquiring
the device node, so a return -ENOENT has been added for that case.Show less |
In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mvm: don't leak a link on AP removal
Release the link mapping resource in AP removal. This impacted devices
that do not support the MLD...Show moreIn the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mvm: don't leak a link on AP removal
Release the link mapping resource in AP removal. This impacted devices
that do not support the MLD API (9260 and down).
On those devices, we couldn't start the AP again after the AP has been
already started and stopped.Show less |
In the Linux kernel, the following vulnerability has been resolved:
NFSD: Never decrement pending_async_copies on error
The error flow in nfsd4_copy() calls cleanup_async_copy(), which
already decrements nn->pending_as...Show moreIn the Linux kernel, the following vulnerability has been resolved:
NFSD: Never decrement pending_async_copies on error
The error flow in nfsd4_copy() calls cleanup_async_copy(), which
already decrements nn->pending_async_copies.Show less |
In the Linux kernel, the following vulnerability has been resolved:
platform/x86/amd/pmc: Detect when STB is not available
Loading the amd_pmc module as:
amd_pmc enable_stb=1
...can result in the following messag...Show moreIn the Linux kernel, the following vulnerability has been resolved:
platform/x86/amd/pmc: Detect when STB is not available
Loading the amd_pmc module as:
amd_pmc enable_stb=1
...can result in the following messages in the kernel ring buffer:
amd_pmc AMDI0009:00: SMU cmd failed. err: 0xff
ioremap on RAM at 0x0000000000000000 - 0x0000000000ffffff
WARNING: CPU: 10 PID: 2151 at arch/x86/mm/ioremap.c:217 __ioremap_caller+0x2cd/0x340
Further debugging reveals that this occurs when the requests for
S2D_PHYS_ADDR_LOW and S2D_PHYS_ADDR_HIGH return a value of 0,
indicating that the STB is inaccessible. To prevent the ioremap
warning and provide clarity to the user, handle the invalid address
and display an error message.Show less |
In the Linux kernel, the following vulnerability has been resolved:
drm/panthor: Be stricter about IO mapping flags
The current panthor_device_mmap_io() implementation has two issues:
1. For mapping DRM_PANTHOR_USER_F...Show moreIn the Linux kernel, the following vulnerability has been resolved:
drm/panthor: Be stricter about IO mapping flags
The current panthor_device_mmap_io() implementation has two issues:
1. For mapping DRM_PANTHOR_USER_FLUSH_ID_MMIO_OFFSET,
panthor_device_mmap_io() bails if VM_WRITE is set, but does not clear
VM_MAYWRITE. That means userspace can use mprotect() to make the mapping
writable later on. This is a classic Linux driver gotcha.
I don't think this actually has any impact in practice:
When the GPU is powered, writes to the FLUSH_ID seem to be ignored; and
when the GPU is not powered, the dummy_latest_flush page provided by the
driver is deliberately designed to not do any flushes, so the only thing
writing to the dummy_latest_flush could achieve would be to make *more*
flushes happen.
2. panthor_device_mmap_io() does not block MAP_PRIVATE mappings (which are
mappings without the VM_SHARED flag).
MAP_PRIVATE in combination with VM_MAYWRITE indicates that the VMA has
copy-on-write semantics, which for VM_PFNMAP are semi-supported but
fairly cursed.
In particular, in such a mapping, the driver can only install PTEs
during mmap() by calling remap_pfn_range() (because remap_pfn_range()
wants to **store the physical address of the mapped physical memory into
the vm_pgoff of the VMA**); installing PTEs later on with a fault
handler (as panthor does) is not supported in private mappings, and so
if you try to fault in such a mapping, vmf_insert_pfn_prot() splats when
it hits a BUG() check.
Fix it by clearing the VM_MAYWRITE flag (userspace writing to the FLUSH_ID
doesn't make sense) and requiring VM_SHARED (copy-on-write semantics for
the FLUSH_ID don't make sense).
Reproducers for both scenarios are in the notes of my patch on the mailing
list; I tested that these bugs exist on a Rock 5B machine.
Note that I only compile-tested the patch, I haven't tested it; I don't
have a working kernel build setup for the test machine yet. Please test it
before applying it.Show less |
In the Linux kernel, the following vulnerability has been resolved:
usb: dwc3: fix fault at system suspend if device was already runtime suspended
If the device was already runtime suspended then during system suspend...Show moreIn the Linux kernel, the following vulnerability has been resolved:
usb: dwc3: fix fault at system suspend if device was already runtime suspended
If the device was already runtime suspended then during system suspend
we cannot access the device registers else it will crash.
Also we cannot access any registers after dwc3_core_exit() on some
platforms so move the dwc3_enable_susphy() call to the top.Show less |
In the Linux kernel, the following vulnerability has been resolved:
firmware: qcom: scm: fix a NULL-pointer dereference
Some SCM calls can be invoked with __scm being NULL (the driver may not
have been and will not be...Show moreIn the Linux kernel, the following vulnerability has been resolved:
firmware: qcom: scm: fix a NULL-pointer dereference
Some SCM calls can be invoked with __scm being NULL (the driver may not
have been and will not be probed as there's no SCM entry in device-tree).
Make sure we don't dereference a NULL pointer.Show less |
In the Linux kernel, the following vulnerability has been resolved:
firmware: arm_scmi: Fix slab-use-after-free in scmi_bus_notifier()
The scmi_dev->name is released prematurely in __scmi_device_destroy(),
which causes...Show moreIn the Linux kernel, the following vulnerability has been resolved:
firmware: arm_scmi: Fix slab-use-after-free in scmi_bus_notifier()
The scmi_dev->name is released prematurely in __scmi_device_destroy(),
which causes slab-use-after-free when accessing scmi_dev->name in
scmi_bus_notifier(). So move the release of scmi_dev->name to
scmi_device_release() to avoid slab-use-after-free.
| BUG: KASAN: slab-use-after-free in strncmp+0xe4/0xec
| Read of size 1 at addr ffffff80a482bcc0 by task swapper/0/1
|
| CPU: 1 PID: 1 Comm: swapper/0 Not tainted 6.6.38-debug #1
| Hardware name: Qualcomm Technologies, Inc. SA8775P Ride (DT)
| Call trace:
| dump_backtrace+0x94/0x114
| show_stack+0x18/0x24
| dump_stack_lvl+0x48/0x60
| print_report+0xf4/0x5b0
| kasan_report+0xa4/0xec
| __asan_report_load1_noabort+0x20/0x2c
| strncmp+0xe4/0xec
| scmi_bus_notifier+0x5c/0x54c
| notifier_call_chain+0xb4/0x31c
| blocking_notifier_call_chain+0x68/0x9c
| bus_notify+0x54/0x78
| device_del+0x1bc/0x840
| device_unregister+0x20/0xb4
| __scmi_device_destroy+0xac/0x280
| scmi_device_destroy+0x94/0xd0
| scmi_chan_setup+0x524/0x750
| scmi_probe+0x7fc/0x1508
| platform_probe+0xc4/0x19c
| really_probe+0x32c/0x99c
| __driver_probe_device+0x15c/0x3c4
| driver_probe_device+0x5c/0x170
| __driver_attach+0x1c8/0x440
| bus_for_each_dev+0xf4/0x178
| driver_attach+0x3c/0x58
| bus_add_driver+0x234/0x4d4
| driver_register+0xf4/0x3c0
| __platform_driver_register+0x60/0x88
| scmi_driver_init+0xb0/0x104
| do_one_initcall+0xb4/0x664
| kernel_init_freeable+0x3c8/0x894
| kernel_init+0x24/0x1e8
| ret_from_fork+0x10/0x20
|
| Allocated by task 1:
| kasan_save_stack+0x2c/0x54
| kasan_set_track+0x2c/0x40
| kasan_save_alloc_info+0x24/0x34
| __kasan_kmalloc+0xa0/0xb8
| __kmalloc_node_track_caller+0x6c/0x104
| kstrdup+0x48/0x84
| kstrdup_const+0x34/0x40
| __scmi_device_create.part.0+0x8c/0x408
| scmi_device_create+0x104/0x370
| scmi_chan_setup+0x2a0/0x750
| scmi_probe+0x7fc/0x1508
| platform_probe+0xc4/0x19c
| really_probe+0x32c/0x99c
| __driver_probe_device+0x15c/0x3c4
| driver_probe_device+0x5c/0x170
| __driver_attach+0x1c8/0x440
| bus_for_each_dev+0xf4/0x178
| driver_attach+0x3c/0x58
| bus_add_driver+0x234/0x4d4
| driver_register+0xf4/0x3c0
| __platform_driver_register+0x60/0x88
| scmi_driver_init+0xb0/0x104
| do_one_initcall+0xb4/0x664
| kernel_init_freeable+0x3c8/0x894
| kernel_init+0x24/0x1e8
| ret_from_fork+0x10/0x20
|
| Freed by task 1:
| kasan_save_stack+0x2c/0x54
| kasan_set_track+0x2c/0x40
| kasan_save_free_info+0x38/0x5c
| __kasan_slab_free+0xe8/0x164
| __kmem_cache_free+0x11c/0x230
| kfree+0x70/0x130
| kfree_const+0x20/0x40
| __scmi_device_destroy+0x70/0x280
| scmi_device_destroy+0x94/0xd0
| scmi_chan_setup+0x524/0x750
| scmi_probe+0x7fc/0x1508
| platform_probe+0xc4/0x19c
| really_probe+0x32c/0x99c
| __driver_probe_device+0x15c/0x3c4
| driver_probe_device+0x5c/0x170
| __driver_attach+0x1c8/0x440
| bus_for_each_dev+0xf4/0x178
| driver_attach+0x3c/0x58
| bus_add_driver+0x234/0x4d4
| driver_register+0xf4/0x3c0
| __platform_driver_register+0x60/0x88
| scmi_driver_init+0xb0/0x104
| do_one_initcall+0xb4/0x664
| kernel_init_freeable+0x3c8/0x894
| kernel_init+0x24/0x1e8
| ret_from_fork+0x10/0x20Show less |