Linux Kernel

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix out-of-bounds access in 'dcn21_link_encoder_create' An issue was identified in the dcn21_link_encoder_create function where an out-of-bounds access could occur when the hpd_source index was used to reference the link_enc_hpd_regs array. This array has a fixed size and the index was not being checked against the array's bounds before accessing it. This fix adds a conditional check to ensure that the hpd_source index is within the valid range of the link_enc_hpd_regs array. If the index is out of bounds, the function now returns NULL to prevent undefined behavior. References: [ 65.920507] ------------[ cut here ]------------ [ 65.920510] UBSAN: array-index-out-of-bounds in drivers/gpu/drm/amd/amdgpu/../display/dc/resource/dcn21/dcn21_resource.c:1312:29 [ 65.920519] index 7 is out of range for type 'dcn10_link_enc_hpd_registers [5]' [ 65.920523] CPU: 3 PID: 1178 Comm: modprobe Tainted: G OE 6.8.0-cleanershaderfeatureresetasdntipmi200nv2132 #13 [ 65.920525] Hardware name: AMD Majolica-RN/Majolica-RN, BIOS WMJ0429N_Weekly_20_04_2 04/29/2020 [ 65.920527] Call Trace: [ 65.920529] <TASK> [ 65.920532] dump_stack_lvl+0x48/0x70 [ 65.920541] dump_stack+0x10/0x20 [ 65.920543] __ubsan_handle_out_of_bounds+0xa2/0xe0 [ 65.920549] dcn21_link_encoder_create+0xd9/0x140 [amdgpu] [ 65.921009] link_create+0x6d3/0xed0 [amdgpu] [ 65.921355] create_links+0x18a/0x4e0 [amdgpu] [ 65.921679] dc_create+0x360/0x720 [amdgpu] [ 65.921999] ? dmi_matches+0xa0/0x220 [ 65.922004] amdgpu_dm_init+0x2b6/0x2c90 [amdgpu] [ 65.922342] ? console_unlock+0x77/0x120 [ 65.922348] ? dev_printk_emit+0x86/0xb0 [ 65.922354] dm_hw_init+0x15/0x40 [amdgpu] [ 65.922686] amdgpu_device_init+0x26a8/0x33a0 [amdgpu] [ 65.922921] amdgpu_driver_load_kms+0x1b/0xa0 [amdgpu] [ 65.923087] amdgpu_pci_probe+0x1b7/0x630 [amdgpu] [ 65.923087] local_pci_probe+0x4b/0xb0 [ 65.923087] pci_device_probe+0xc8/0x280 [ 65.923087] really_probe+0x187/0x300 [ 65.923087] __driver_probe_device+0x85/0x130 [ 65.923087] driver_probe_device+0x24/0x110 [ 65.923087] __driver_attach+0xac/0x1d0 [ 65.923087] ? __pfx___driver_attach+0x10/0x10 [ 65.923087] bus_for_each_dev+0x7d/0xd0 [ 65.923087] driver_attach+0x1e/0x30 [ 65.923087] bus_add_driver+0xf2/0x200 [ 65.923087] driver_register+0x64/0x130 [ 65.923087] ? __pfx_amdgpu_init+0x10/0x10 [amdgpu] [ 65.923087] __pci_register_driver+0x61/0x70 [ 65.923087] amdgpu_init+0x7d/0xff0 [amdgpu] [ 65.923087] do_one_initcall+0x49/0x310 [ 65.923087] ? kmalloc_trace+0x136/0x360 [ 65.923087] do_init_module+0x6a/0x270 [ 65.923087] load_module+0x1fce/0x23a0 [ 65.923087] init_module_from_file+0x9c/0xe0 [ 65.923087] ? init_module_from_file+0x9c/0xe0 [ 65.923087] idempotent_init_module+0x179/0x230 [ 65.923087] __x64_sys_finit_module+0x5d/0xa0 [ 65.923087] do_syscall_64+0x76/0x120 [ 65.923087] entry_SYSCALL_64_after_hwframe+0x6e/0x76 [ 65.923087] RIP: 0033:0x7f2d80f1e88d [ 65.923087] Code: 5b 41 5c c3 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 73 b5 0f 00 f7 d8 64 89 01 48 [ 65.923087] RSP: 002b:00007ffc7bc1aa78 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 [ 65.923087] RAX: ffffffffffffffda RBX: 0000564c9c1db130 RCX: 00007f2d80f1e88d [ 65.923087] RDX: 0000000000000000 RSI: 0000564c9c1e5480 RDI: 000000000000000f [ 65.923087] RBP: 0000000000040000 R08: 0000000000000000 R09: 0000000000000002 [ 65.923087] R10: 000000000000000f R11: 0000000000000246 R12: 0000564c9c1e5480 [ 65.923087] R13: 0000564c9c1db260 R14: 0000000000000000 R15: 0000564c9c1e54b0 [ 65.923087] </TASK> [ 65.923927] ---[ end trace ]---Show less

In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix atomic calls in ath12k_mac_op_set_bitrate_mask() When I try to manually set bitrates: iw wlan0 set bitrates legacy-2.4 1 I get sleeping from invalid context error, see below. Fix that by switching to use recently introduced ieee80211_iterate_stations_mtx(). Do note that WCN6855 firmware is still crashing, I'm not sure if that firmware even supports bitrate WMI commands and should we consider disabling ath12k_mac_op_set_bitrate_mask() for WCN6855? But that's for another patch. BUG: sleeping function called from invalid context at drivers/net/wireless/ath/ath12k/wmi.c:420 in_atomic(): 0, irqs_disabled(): 0, non_block: 0, pid: 2236, name: iw preempt_count: 0, expected: 0 RCU nest depth: 1, expected: 0 3 locks held by iw/2236: #0: ffffffffabc6f1d8 (cb_lock){++++}-{3:3}, at: genl_rcv+0x14/0x40 #1: ffff888138410810 (&rdev->wiphy.mtx){+.+.}-{3:3}, at: nl80211_pre_doit+0x54d/0x800 [cfg80211] #2: ffffffffab2cfaa0 (rcu_read_lock){....}-{1:2}, at: ieee80211_iterate_stations_atomic+0x2f/0x200 [mac80211] CPU: 3 UID: 0 PID: 2236 Comm: iw Not tainted 6.11.0-rc7-wt-ath+ #1772 Hardware name: Intel(R) Client Systems NUC8i7HVK/NUC8i7HVB, BIOS HNKBLi70.86A.0067.2021.0528.1339 05/28/2021 Call Trace: <TASK> dump_stack_lvl+0xa4/0xe0 dump_stack+0x10/0x20 __might_resched+0x363/0x5a0 ? __alloc_skb+0x165/0x340 __might_sleep+0xad/0x160 ath12k_wmi_cmd_send+0xb1/0x3d0 [ath12k] ? ath12k_wmi_init_wcn7850+0xa40/0xa40 [ath12k] ? __netdev_alloc_skb+0x45/0x7b0 ? __asan_memset+0x39/0x40 ? ath12k_wmi_alloc_skb+0xf0/0x150 [ath12k] ? reacquire_held_locks+0x4d0/0x4d0 ath12k_wmi_set_peer_param+0x340/0x5b0 [ath12k] ath12k_mac_disable_peer_fixed_rate+0xa3/0x110 [ath12k] ? ath12k_mac_vdev_stop+0x4f0/0x4f0 [ath12k] ieee80211_iterate_stations_atomic+0xd4/0x200 [mac80211] ath12k_mac_op_set_bitrate_mask+0x5d2/0x1080 [ath12k] ? ath12k_mac_vif_chan+0x320/0x320 [ath12k] drv_set_bitrate_mask+0x267/0x470 [mac80211] ieee80211_set_bitrate_mask+0x4cc/0x8a0 [mac80211] ? __this_cpu_preempt_check+0x13/0x20 nl80211_set_tx_bitrate_mask+0x2bc/0x530 [cfg80211] ? nl80211_parse_tx_bitrate_mask+0x2320/0x2320 [cfg80211] ? trace_contention_end+0xef/0x140 ? rtnl_unlock+0x9/0x10 ? nl80211_pre_doit+0x557/0x800 [cfg80211] genl_family_rcv_msg_doit+0x1f0/0x2e0 ? genl_family_rcv_msg_attrs_parse.isra.0+0x250/0x250 ? ns_capable+0x57/0xd0 genl_family_rcv_msg+0x34c/0x600 ? genl_family_rcv_msg_dumpit+0x310/0x310 ? __lock_acquire+0xc62/0x1de0 ? he_set_mcs_mask.isra.0+0x8d0/0x8d0 [cfg80211] ? nl80211_parse_tx_bitrate_mask+0x2320/0x2320 [cfg80211] ? cfg80211_external_auth_request+0x690/0x690 [cfg80211] genl_rcv_msg+0xa0/0x130 netlink_rcv_skb+0x14c/0x400 ? genl_family_rcv_msg+0x600/0x600 ? netlink_ack+0xd70/0xd70 ? rwsem_optimistic_spin+0x4f0/0x4f0 ? genl_rcv+0x14/0x40 ? down_read_killable+0x580/0x580 ? netlink_deliver_tap+0x13e/0x350 ? __this_cpu_preempt_check+0x13/0x20 genl_rcv+0x23/0x40 netlink_unicast+0x45e/0x790 ? netlink_attachskb+0x7f0/0x7f0 netlink_sendmsg+0x7eb/0xdb0 ? netlink_unicast+0x790/0x790 ? __this_cpu_preempt_check+0x13/0x20 ? selinux_socket_sendmsg+0x31/0x40 ? netlink_unicast+0x790/0x790 __sock_sendmsg+0xc9/0x160 ____sys_sendmsg+0x620/0x990 ? kernel_sendmsg+0x30/0x30 ? __copy_msghdr+0x410/0x410 ? __kasan_check_read+0x11/0x20 ? mark_lock+0xe6/0x1470 ___sys_sendmsg+0xe9/0x170 ? copy_msghdr_from_user+0x120/0x120 ? __lock_acquire+0xc62/0x1de0 ? do_fault_around+0x2c6/0x4e0 ? do_user_addr_fault+0x8c1/0xde0 ? reacquire_held_locks+0x220/0x4d0 ? do_user_addr_fault+0x8c1/0xde0 ? __kasan_check_read+0x11/0x20 ? __fdget+0x4e/0x1d0 ? sockfd_lookup_light+0x1a/0x170 __sys_sendmsg+0xd2/0x180 ? __sys_sendmsg_sock+0x20/0x20 ? reacquire_held_locks+0x4d0/0x4d0 ? debug_smp_processor_id+0x17/0x20 __x64_sys_sendmsg+0x72/0xb0 ? lockdep_hardirqs_on+0x7d/0x100 x64_sys_call+0x894/0x9f0 do_syscall_64+0x64/0x130 entry_SYSCALL_64_after_ ---truncated---Show less

In the Linux kernel, the following vulnerability has been resolved: af_packet: avoid erroring out after sock_init_data() in packet_create() After sock_init_data() the allocated sk object is attached to the provided sock object. On error, packet_create() frees the sk object leaving the dangling pointer in the sock object on return. Some other code may try to use this pointer and cause use-after-free.Show less

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: do not leave dangling sk pointer on error in l2cap_sock_create() bt_sock_alloc() allocates the sk object and attaches it to the provided sock object. On error l2cap_sock_alloc() frees the sk object, but the dangling pointer is still attached to the sock object, which may create use-after-free in other code.Show less

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: RFCOMM: avoid leaving dangling sk pointer in rfcomm_sock_alloc() bt_sock_alloc() attaches allocated sk object to the provided sock object. If rfcomm_dlc_alloc() fails, we release the sk object, but leave the dangling pointer in the sock object, which may cause use-after-free. Fix this by swapping calls to bt_sock_alloc() and rfcomm_dlc_alloc().Show less

In the Linux kernel, the following vulnerability has been resolved: net: af_can: do not leave a dangling sk pointer in can_create() On error can_create() frees the allocated sk object, but sock_init_data() has already attached it to the provided sock object. This will leave a dangling sk pointer in the sock object and may cause use-after-free later.Show less

In the Linux kernel, the following vulnerability has been resolved: net: ieee802154: do not leave a dangling sk pointer in ieee802154_create() sock_init_data() attaches the allocated sk object to the provided sock object. If ieee802154_create() fails later, the allocated sk object is freed, but the dangling pointer remains in the provided sock object, which may allow use-after-free. Clear the sk pointer in the sock object on error.Show less

In the Linux kernel, the following vulnerability has been resolved: net: inet: do not leave a dangling sk pointer in inet_create() sock_init_data() attaches the allocated sk object to the provided sock object. If inet_create() fails later, the sk object is freed, but the sock object retains the dangling pointer, which may create use-after-free later. Clear the sk pointer in the sock object on error.Show less

In the Linux kernel, the following vulnerability has been resolved: net: inet6: do not leave a dangling sk pointer in inet6_create() sock_init_data() attaches the allocated sk pointer to the provided sock object. If inet6_create() fails later, the sk object is released, but the sock object retains the dangling sk pointer, which may cause use-after-free later. Clear the sock sk pointer on error.Show less

In the Linux kernel, the following vulnerability has been resolved: wifi: ath10k: avoid NULL pointer error during sdio remove When running 'rmmod ath10k', ath10k_sdio_remove() will free sdio workqueue by destroy_workqueue(). But if CONFIG_INIT_ON_FREE_DEFAULT_ON is set to yes, kernel panic will happen: Call trace: destroy_workqueue+0x1c/0x258 ath10k_sdio_remove+0x84/0x94 sdio_bus_remove+0x50/0x16c device_release_driver_internal+0x188/0x25c device_driver_detach+0x20/0x2c This is because during 'rmmod ath10k', ath10k_sdio_remove() will call ath10k_core_destroy() before destroy_workqueue(). wiphy_dev_release() will finally be called in ath10k_core_destroy(). This function will free struct cfg80211_registered_device *rdev and all its members, including wiphy, dev and the pointer of sdio workqueue. Then the pointer of sdio workqueue will be set to NULL due to CONFIG_INIT_ON_FREE_DEFAULT_ON. After device release, destroy_workqueue() will use NULL pointer then the kernel panic happen. Call trace: ath10k_sdio_remove ->ath10k_core_unregister …… ->ath10k_core_stop ->ath10k_hif_stop ->ath10k_sdio_irq_disable ->ath10k_hif_power_down ->del_timer_sync(&ar_sdio->sleep_timer) ->ath10k_core_destroy ->ath10k_mac_destroy ->ieee80211_free_hw ->wiphy_free …… ->wiphy_dev_release ->destroy_workqueue Need to call destroy_workqueue() before ath10k_core_destroy(), free the work queue buffer first and then free pointer of work queue by ath10k_core_destroy(). This order matches the error path order in ath10k_sdio_probe(). No work will be queued on sdio workqueue between it is destroyed and ath10k_core_destroy() is called. Based on the call_stack above, the reason is: Only ath10k_sdio_sleep_timer_handler(), ath10k_sdio_hif_tx_sg() and ath10k_sdio_irq_disable() will queue work on sdio workqueue. Sleep timer will be deleted before ath10k_core_destroy() in ath10k_hif_power_down(). ath10k_sdio_irq_disable() only be called in ath10k_hif_stop(). ath10k_core_unregister() will call ath10k_hif_power_down() to stop hif bus, so ath10k_sdio_hif_tx_sg() won't be called anymore. Tested-on: QCA6174 hw3.2 SDIO WLAN.RMH.4.4.1-00189Show less

In the Linux kernel, the following vulnerability has been resolved: jfs: array-index-out-of-bounds fix in dtReadFirst The value of stbl can be sometimes out of bounds due to a bad filesystem. Added a check with appopriate return of error code in that case.Show less

In the Linux kernel, the following vulnerability has been resolved: jfs: fix shift-out-of-bounds in dbSplit When dmt_budmin is less than zero, it causes errors in the later stages. Added a check to return an error beforehand in dbAllocCtl itself.Show less

In the Linux kernel, the following vulnerability has been resolved: jfs: add a check to prevent array-index-out-of-bounds in dbAdjTree When the value of lp is 0 at the beginning of the for loop, it will become negative in the next assignment and we should bail out.Show less

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: set the right AMDGPU sg segment limitation The driver needs to set the correct max_segment_size; otherwise debug_dma_map_sg() will complain about the over-mapping of the AMDGPU sg length as following: WARNING: CPU: 6 PID: 1964 at kernel/dma/debug.c:1178 debug_dma_map_sg+0x2dc/0x370 [ 364.049444] Modules linked in: veth amdgpu(OE) amdxcp drm_exec gpu_sched drm_buddy drm_ttm_helper ttm(OE) drm_suballoc_helper drm_display_helper drm_kms_helper i2c_algo_bit rpcsec_gss_krb5 auth_rpcgss nfsv4 nfs lockd grace netfs xt_conntrack xt_MASQUERADE nf_conntrack_netlink xfrm_user xfrm_algo iptable_nat xt_addrtype iptable_filter br_netfilter nvme_fabrics overlay nfnetlink_cttimeout nfnetlink openvswitch nsh nf_conncount nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 libcrc32c bridge stp llc amd_atl intel_rapl_msr intel_rapl_common sunrpc sch_fq_codel snd_hda_codec_realtek snd_hda_codec_generic snd_hda_scodec_component snd_hda_codec_hdmi snd_hda_intel snd_intel_dspcfg edac_mce_amd binfmt_misc snd_hda_codec snd_pci_acp6x snd_hda_core snd_acp_config snd_hwdep snd_soc_acpi kvm_amd snd_pcm kvm snd_seq_midi snd_seq_midi_event crct10dif_pclmul ghash_clmulni_intel sha512_ssse3 snd_rawmidi sha256_ssse3 sha1_ssse3 aesni_intel snd_seq nls_iso8859_1 crypto_simd snd_seq_device cryptd snd_timer rapl input_leds snd [ 364.049532] ipmi_devintf wmi_bmof ccp serio_raw k10temp sp5100_tco soundcore ipmi_msghandler cm32181 industrialio mac_hid msr parport_pc ppdev lp parport drm efi_pstore ip_tables x_tables pci_stub crc32_pclmul nvme ahci libahci i2c_piix4 r8169 nvme_core i2c_designware_pci realtek i2c_ccgx_ucsi video wmi hid_generic cdc_ether usbnet usbhid hid r8152 mii [ 364.049576] CPU: 6 PID: 1964 Comm: rocminfo Tainted: G OE 6.10.0-custom #492 [ 364.049579] Hardware name: AMD Majolica-RN/Majolica-RN, BIOS RMJ1009A 06/13/2021 [ 364.049582] RIP: 0010:debug_dma_map_sg+0x2dc/0x370 [ 364.049585] Code: 89 4d b8 e8 36 b1 86 00 8b 4d b8 48 8b 55 b0 44 8b 45 a8 4c 8b 4d a0 48 89 c6 48 c7 c7 00 4b 74 bc 4c 89 4d b8 e8 b4 73 f3 ff <0f> 0b 4c 8b 4d b8 8b 15 c8 2c b8 01 85 d2 0f 85 ee fd ff ff 8b 05 [ 364.049588] RSP: 0018:ffff9ca600b57ac0 EFLAGS: 00010286 [ 364.049590] RAX: 0000000000000000 RBX: ffff88b7c132b0c8 RCX: 0000000000000027 [ 364.049592] RDX: ffff88bb0f521688 RSI: 0000000000000001 RDI: ffff88bb0f521680 [ 364.049594] RBP: ffff9ca600b57b20 R08: 000000000000006f R09: ffff9ca600b57930 [ 364.049596] R10: ffff9ca600b57928 R11: ffffffffbcb46328 R12: 0000000000000000 [ 364.049597] R13: 0000000000000001 R14: ffff88b7c19c0700 R15: ffff88b7c9059800 [ 364.049599] FS: 00007fb2d3516e80(0000) GS:ffff88bb0f500000(0000) knlGS:0000000000000000 [ 364.049601] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 364.049603] CR2: 000055610bd03598 CR3: 00000001049f6000 CR4: 0000000000350ef0 [ 364.049605] Call Trace: [ 364.049607] <TASK> [ 364.049609] ? show_regs+0x6d/0x80 [ 364.049614] ? __warn+0x8c/0x140 [ 364.049618] ? debug_dma_map_sg+0x2dc/0x370 [ 364.049621] ? report_bug+0x193/0x1a0 [ 364.049627] ? handle_bug+0x46/0x80 [ 364.049631] ? exc_invalid_op+0x1d/0x80 [ 364.049635] ? asm_exc_invalid_op+0x1f/0x30 [ 364.049642] ? debug_dma_map_sg+0x2dc/0x370 [ 364.049647] __dma_map_sg_attrs+0x90/0xe0 [ 364.049651] dma_map_sgtable+0x25/0x40 [ 364.049654] amdgpu_bo_move+0x59a/0x850 [amdgpu] [ 364.049935] ? srso_return_thunk+0x5/0x5f [ 364.049939] ? amdgpu_ttm_tt_populate+0x5d/0xc0 [amdgpu] [ 364.050095] ttm_bo_handle_move_mem+0xc3/0x180 [ttm] [ 364.050103] ttm_bo_validate+0xc1/0x160 [ttm] [ 364.050108] ? amdgpu_ttm_tt_get_user_pages+0xe5/0x1b0 [amdgpu] [ 364.050263] amdgpu_amdkfd_gpuvm_alloc_memory_of_gpu+0xa12/0xc90 [amdgpu] [ 364.050473] kfd_ioctl_alloc_memory_of_gpu+0x16b/0x3b0 [amdgpu] [ 364.050680] kfd_ioctl+0x3c2/0x530 [amdgpu] [ 364.050866] ? __pfx_kfd_ioctl_alloc_memory_of_gpu+0x10/0x10 [amdgpu] [ 364.05105 ---truncated---Show less

In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: Fix oops due to NULL pointer dereference in brcmf_sdiod_sglist_rw() This patch fixes a NULL pointer dereference bug in brcmfmac that occurs when a high 'sd_sgentry_align' value applies (e.g. 512) and a lot of queued SKBs are sent from the pkt queue. The problem is the number of entries in the pre-allocated sgtable, it is nents = max(rxglom_size, txglom_size) + max(rxglom_size, txglom_size) >> 4 + 1. Given the default [rt]xglom_size=32 it's actually 35 which is too small. Worst case, the pkt queue can end up with 64 SKBs. This occurs when a new SKB is added for each original SKB if tailroom isn't enough to hold tail_pad. At least one sg entry is needed for each SKB. So, eventually the "skb_queue_walk loop" in brcmf_sdiod_sglist_rw may run out of sg entries. This makes sg_next return NULL and this causes the oops. The patch sets nents to max(rxglom_size, txglom_size) * 2 to be able handle the worst-case. Btw. this requires only 64-35=29 * 16 (or 20 if CONFIG_NEED_SG_DMA_LENGTH) = 464 additional bytes of memory.Show less

In the Linux kernel, the following vulnerability has been resolved: bpf: Call free_htab_elem() after htab_unlock_bucket() For htab of maps, when the map is removed from the htab, it may hold the last reference of the map. bpf_map_fd_put_ptr() will invoke bpf_map_free_id() to free the id of the removed map element. However, bpf_map_fd_put_ptr() is invoked while holding a bucket lock (raw_spin_lock_t), and bpf_map_free_id() attempts to acquire map_idr_lock (spinlock_t), triggering the following lockdep warning: ============================= [ BUG: Invalid wait context ] 6.11.0-rc4+ #49 Not tainted ----------------------------- test_maps/4881 is trying to lock: ffffffff84884578 (map_idr_lock){+...}-{3:3}, at: bpf_map_free_id.part.0+0x21/0x70 other info that might help us debug this: context-{5:5} 2 locks held by test_maps/4881: #0: ffffffff846caf60 (rcu_read_lock){....}-{1:3}, at: bpf_fd_htab_map_update_elem+0xf9/0x270 #1: ffff888149ced148 (&htab->lockdep_key#2){....}-{2:2}, at: htab_map_update_elem+0x178/0xa80 stack backtrace: CPU: 0 UID: 0 PID: 4881 Comm: test_maps Not tainted 6.11.0-rc4+ #49 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), ... Call Trace: <TASK> dump_stack_lvl+0x6e/0xb0 dump_stack+0x10/0x20 __lock_acquire+0x73e/0x36c0 lock_acquire+0x182/0x450 _raw_spin_lock_irqsave+0x43/0x70 bpf_map_free_id.part.0+0x21/0x70 bpf_map_put+0xcf/0x110 bpf_map_fd_put_ptr+0x9a/0xb0 free_htab_elem+0x69/0xe0 htab_map_update_elem+0x50f/0xa80 bpf_fd_htab_map_update_elem+0x131/0x270 htab_map_update_elem+0x50f/0xa80 bpf_fd_htab_map_update_elem+0x131/0x270 bpf_map_update_value+0x266/0x380 __sys_bpf+0x21bb/0x36b0 __x64_sys_bpf+0x45/0x60 x64_sys_call+0x1b2a/0x20d0 do_syscall_64+0x5d/0x100 entry_SYSCALL_64_after_hwframe+0x76/0x7e One way to fix the lockdep warning is using raw_spinlock_t for map_idr_lock as well. However, bpf_map_alloc_id() invokes idr_alloc_cyclic() after acquiring map_idr_lock, it will trigger a similar lockdep warning because the slab's lock (s->cpu_slab->lock) is still a spinlock. Instead of changing map_idr_lock's type, fix the issue by invoking htab_put_fd_value() after htab_unlock_bucket(). However, only deferring the invocation of htab_put_fd_value() is not enough, because the old map pointers in htab of maps can not be saved during batched deletion. Therefore, also defer the invocation of free_htab_elem(), so these to-be-freed elements could be linked together similar to lru map. There are four callers for ->map_fd_put_ptr: (1) alloc_htab_elem() (through htab_put_fd_value()) It invokes ->map_fd_put_ptr() under a raw_spinlock_t. The invocation of htab_put_fd_value() can not simply move after htab_unlock_bucket(), because the old element has already been stashed in htab->extra_elems. It may be reused immediately after htab_unlock_bucket() and the invocation of htab_put_fd_value() after htab_unlock_bucket() may release the newly-added element incorrectly. Therefore, saving the map pointer of the old element for htab of maps before unlocking the bucket and releasing the map_ptr after unlock. Beside the map pointer in the old element, should do the same thing for the special fields in the old element as well. (2) free_htab_elem() (through htab_put_fd_value()) Its caller includes __htab_map_lookup_and_delete_elem(), htab_map_delete_elem() and __htab_map_lookup_and_delete_batch(). For htab_map_delete_elem(), simply invoke free_htab_elem() after htab_unlock_bucket(). For __htab_map_lookup_and_delete_batch(), just like lru map, linking the to-be-freed element into node_to_free list and invoking free_htab_elem() for these element after unlock. It is safe to reuse batch_flink as the link for node_to_free, because these elements have been removed from the hash llist. Because htab of maps doesn't support lookup_and_delete operation, __htab_map_lookup_and_delete_elem() doesn't have the problem, so kept it as ---truncated---Show less

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_conn: Use disable_delayed_work_sync This makes use of disable_delayed_work_sync instead cancel_delayed_work_sync as it not only cancel the ongoing work but also disables new submit which is disarable since the object holding the work is about to be freed.Show less

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_core: Fix not checking skb length on hci_acldata_packet This fixes not checking if skb really contains an ACL header otherwise the code may attempt to access some uninitilized/invalid memory past the valid skb->data.Show less

In the Linux kernel, the following vulnerability has been resolved: scsi: hisi_sas: Add cond_resched() for no forced preemption model For no forced preemption model kernel, in the scenario where the expander is connected to 12 high performance SAS SSDs, the following call trace may occur: [ 214.409199][ C240] watchdog: BUG: soft lockup - CPU#240 stuck for 22s! [irq/149-hisi_sa:3211] [ 214.568533][ C240] pstate: 60400009 (nZCv daif +PAN -UAO -TCO BTYPE=--) [ 214.575224][ C240] pc : fput_many+0x8c/0xdc [ 214.579480][ C240] lr : fput+0x1c/0xf0 [ 214.583302][ C240] sp : ffff80002de2b900 [ 214.587298][ C240] x29: ffff80002de2b900 x28: ffff1082aa412000 [ 214.593291][ C240] x27: ffff3062a0348c08 x26: ffff80003a9f6000 [ 214.599284][ C240] x25: ffff1062bbac5c40 x24: 0000000000001000 [ 214.605277][ C240] x23: 000000000000000a x22: 0000000000000001 [ 214.611270][ C240] x21: 0000000000001000 x20: 0000000000000000 [ 214.617262][ C240] x19: ffff3062a41ae580 x18: 0000000000010000 [ 214.623255][ C240] x17: 0000000000000001 x16: ffffdb3a6efe5fc0 [ 214.629248][ C240] x15: ffffffffffffffff x14: 0000000003ffffff [ 214.635241][ C240] x13: 000000000000ffff x12: 000000000000029c [ 214.641234][ C240] x11: 0000000000000006 x10: ffff80003a9f7fd0 [ 214.647226][ C240] x9 : ffffdb3a6f0482fc x8 : 0000000000000001 [ 214.653219][ C240] x7 : 0000000000000002 x6 : 0000000000000080 [ 214.659212][ C240] x5 : ffff55480ee9b000 x4 : fffffde7f94c6554 [ 214.665205][ C240] x3 : 0000000000000002 x2 : 0000000000000020 [ 214.671198][ C240] x1 : 0000000000000021 x0 : ffff3062a41ae5b8 [ 214.677191][ C240] Call trace: [ 214.680320][ C240] fput_many+0x8c/0xdc [ 214.684230][ C240] fput+0x1c/0xf0 [ 214.687707][ C240] aio_complete_rw+0xd8/0x1fc [ 214.692225][ C240] blkdev_bio_end_io+0x98/0x140 [ 214.696917][ C240] bio_endio+0x160/0x1bc [ 214.701001][ C240] blk_update_request+0x1c8/0x3bc [ 214.705867][ C240] scsi_end_request+0x3c/0x1f0 [ 214.710471][ C240] scsi_io_completion+0x7c/0x1a0 [ 214.715249][ C240] scsi_finish_command+0x104/0x140 [ 214.720200][ C240] scsi_softirq_done+0x90/0x180 [ 214.724892][ C240] blk_mq_complete_request+0x5c/0x70 [ 214.730016][ C240] scsi_mq_done+0x48/0xac [ 214.734194][ C240] sas_scsi_task_done+0xbc/0x16c [libsas] [ 214.739758][ C240] slot_complete_v3_hw+0x260/0x760 [hisi_sas_v3_hw] [ 214.746185][ C240] cq_thread_v3_hw+0xbc/0x190 [hisi_sas_v3_hw] [ 214.752179][ C240] irq_thread_fn+0x34/0xa4 [ 214.756435][ C240] irq_thread+0xc4/0x130 [ 214.760520][ C240] kthread+0x108/0x13c [ 214.764430][ C240] ret_from_fork+0x10/0x18 This is because in the hisi_sas driver, both the hardware interrupt handler and the interrupt thread are executed on the same CPU. In the performance test scenario, function irq_wait_for_interrupt() will always return 0 if lots of interrupts occurs and the CPU will be continuously consumed. As a result, the CPU cannot run the watchdog thread. When the watchdog time exceeds the specified time, call trace occurs. To fix it, add cond_resched() to execute the watchdog thread.Show less