Linux Kernel

In the Linux kernel, the following vulnerability has been resolved: icmp: Fix a data-race around sysctl_icmp_errors_use_inbound_ifaddr. While reading sysctl_icmp_errors_use_inbound_ifaddr, it can be changed concurrently. Thus, we need to add READ_ONCE() to its reader.Show less

In the Linux kernel, the following vulnerability has been resolved: raw: Fix a data-race around sysctl_raw_l3mdev_accept. While reading sysctl_raw_l3mdev_accept, it can be changed concurrently. Thus, we need to add READ_ONCE() to its reader.Show less

In the Linux kernel, the following vulnerability has been resolved: tcp: Fix a data-race around sysctl_tcp_ecn_fallback. While reading sysctl_tcp_ecn_fallback, it can be changed concurrently. Thus, we need to add READ_ONCE() to its reader.Show less

In the Linux kernel, the following vulnerability has been resolved: nexthop: Fix data-races around nexthop_compat_mode. While reading nexthop_compat_mode, it can be changed concurrently. Thus, we need to add READ_ONCE() to its readers.Show less

In the Linux kernel, the following vulnerability has been resolved: ima: Fix potential memory leak in ima_init_crypto() On failure to allocate the SHA1 tfm, IMA fails to initialize and exits without freeing the ima_algo_array. Add the missing kfree() for ima_algo_array to avoid the potential memory leak.Show less

In the Linux kernel, the following vulnerability has been resolved: sfc: fix use after free when disabling sriov Use after free is detected by kfence when disabling sriov. What was read after being freed was vf->pci_dev: it was freed from pci_disable_sriov and later read in efx_ef10_sriov_free_vf_vports, called from efx_ef10_sriov_free_vf_vswitching. Set the pointer to NULL at release time to not trying to read it later. Reproducer and dmesg log (note that kfence doesn't detect it every time): $ echo 1 > /sys/class/net/enp65s0f0np0/device/sriov_numvfs $ echo 0 > /sys/class/net/enp65s0f0np0/device/sriov_numvfs BUG: KFENCE: use-after-free read in efx_ef10_sriov_free_vf_vswitching+0x82/0x170 [sfc] Use-after-free read at 0x00000000ff3c1ba5 (in kfence-#224): efx_ef10_sriov_free_vf_vswitching+0x82/0x170 [sfc] efx_ef10_pci_sriov_disable+0x38/0x70 [sfc] efx_pci_sriov_configure+0x24/0x40 [sfc] sriov_numvfs_store+0xfe/0x140 kernfs_fop_write_iter+0x11c/0x1b0 new_sync_write+0x11f/0x1b0 vfs_write+0x1eb/0x280 ksys_write+0x5f/0xe0 do_syscall_64+0x5c/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae kfence-#224: 0x00000000edb8ef95-0x00000000671f5ce1, size=2792, cache=kmalloc-4k allocated by task 6771 on cpu 10 at 3137.860196s: pci_alloc_dev+0x21/0x60 pci_iov_add_virtfn+0x2a2/0x320 sriov_enable+0x212/0x3e0 efx_ef10_sriov_configure+0x67/0x80 [sfc] efx_pci_sriov_configure+0x24/0x40 [sfc] sriov_numvfs_store+0xba/0x140 kernfs_fop_write_iter+0x11c/0x1b0 new_sync_write+0x11f/0x1b0 vfs_write+0x1eb/0x280 ksys_write+0x5f/0xe0 do_syscall_64+0x5c/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae freed by task 6771 on cpu 12 at 3170.991309s: device_release+0x34/0x90 kobject_cleanup+0x3a/0x130 pci_iov_remove_virtfn+0xd9/0x120 sriov_disable+0x30/0xe0 efx_ef10_pci_sriov_disable+0x57/0x70 [sfc] efx_pci_sriov_configure+0x24/0x40 [sfc] sriov_numvfs_store+0xfe/0x140 kernfs_fop_write_iter+0x11c/0x1b0 new_sync_write+0x11f/0x1b0 vfs_write+0x1eb/0x280 ksys_write+0x5f/0xe0 do_syscall_64+0x5c/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xaeShow less

In the Linux kernel, the following vulnerability has been resolved: sfc: fix kernel panic when creating VF When creating VFs a kernel panic can happen when calling to efx_ef10_try_update_nic_stats_vf. When releasing a DMA coherent buffer, sometimes, I don't know in what specific circumstances, it has to unmap memory with vunmap. It is disallowed to do that in IRQ context or with BH disabled. Otherwise, we hit this line in vunmap, causing the crash: BUG_ON(in_interrupt()); This patch reenables BH to release the buffer. Log messages when the bug is hit: kernel BUG at mm/vmalloc.c:2727! invalid opcode: 0000 [#1] PREEMPT SMP NOPTI CPU: 6 PID: 1462 Comm: NetworkManager Kdump: loaded Tainted: G I --------- --- 5.14.0-119.el9.x86_64 #1 Hardware name: Dell Inc. PowerEdge R740/06WXJT, BIOS 2.8.2 08/27/2020 RIP: 0010:vunmap+0x2e/0x30 ...skip... Call Trace: __iommu_dma_free+0x96/0x100 efx_nic_free_buffer+0x2b/0x40 [sfc] efx_ef10_try_update_nic_stats_vf+0x14a/0x1c0 [sfc] efx_ef10_update_stats_vf+0x18/0x40 [sfc] efx_start_all+0x15e/0x1d0 [sfc] efx_net_open+0x5a/0xe0 [sfc] __dev_open+0xe7/0x1a0 __dev_change_flags+0x1d7/0x240 dev_change_flags+0x21/0x60 ...skip...Show less

In the Linux kernel, the following vulnerability has been resolved: net: atlantic: remove aq_nic_deinit() when resume aq_nic_deinit() has been called while suspending, so we don't have to call it again on resume. Actually, call it again leads to another hang issue when resuming from S3. Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992345] Call Trace: Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992346] <TASK> Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992348] aq_nic_deinit+0xb4/0xd0 [atlantic] Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992356] aq_pm_thaw+0x7f/0x100 [atlantic] Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992362] pci_pm_resume+0x5c/0x90 Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992366] ? pci_pm_thaw+0x80/0x80 Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992368] dpm_run_callback+0x4e/0x120 Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992371] device_resume+0xad/0x200 Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992373] async_resume+0x1e/0x40 Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992374] async_run_entry_fn+0x33/0x120 Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992377] process_one_work+0x220/0x3c0 Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992380] worker_thread+0x4d/0x3f0 Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992382] ? process_one_work+0x3c0/0x3c0 Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992384] kthread+0x12a/0x150 Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992386] ? set_kthread_struct+0x40/0x40 Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992387] ret_from_fork+0x22/0x30 Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992391] </TASK> Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992392] ---[ end trace 1ec8c79604ed5e0d ]--- Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992394] PM: dpm_run_callback(): pci_pm_resume+0x0/0x90 returns -110 Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992397] atlantic 0000:02:00.0: PM: failed to resume async: error -110Show less

In the Linux kernel, the following vulnerability has been resolved: powerpc/xive/spapr: correct bitmap allocation size kasan detects access beyond the end of the xibm->bitmap allocation: BUG: KASAN: slab-out-of-bounds in _find_first_zero_bit+0x40/0x140 Read of size 8 at addr c00000001d1d0118 by task swapper/0/1 CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.19.0-rc2-00001-g90df023b36dd #28 Call Trace: [c00000001d98f770] [c0000000012baab8] dump_stack_lvl+0xac/0x108 (unreliable) [c00000001d98f7b0] [c00000000068faac] print_report+0x37c/0x710 [c00000001d98f880] [c0000000006902c0] kasan_report+0x110/0x354 [c00000001d98f950] [c000000000692324] __asan_load8+0xa4/0xe0 [c00000001d98f970] [c0000000011c6ed0] _find_first_zero_bit+0x40/0x140 [c00000001d98f9b0] [c0000000000dbfbc] xive_spapr_get_ipi+0xcc/0x260 [c00000001d98fa70] [c0000000000d6d28] xive_setup_cpu_ipi+0x1e8/0x450 [c00000001d98fb30] [c000000004032a20] pSeries_smp_probe+0x5c/0x118 [c00000001d98fb60] [c000000004018b44] smp_prepare_cpus+0x944/0x9ac [c00000001d98fc90] [c000000004009f9c] kernel_init_freeable+0x2d4/0x640 [c00000001d98fd90] [c0000000000131e8] kernel_init+0x28/0x1d0 [c00000001d98fe10] [c00000000000cd54] ret_from_kernel_thread+0x5c/0x64 Allocated by task 0: kasan_save_stack+0x34/0x70 __kasan_kmalloc+0xb4/0xf0 __kmalloc+0x268/0x540 xive_spapr_init+0x4d0/0x77c pseries_init_irq+0x40/0x27c init_IRQ+0x44/0x84 start_kernel+0x2a4/0x538 start_here_common+0x1c/0x20 The buggy address belongs to the object at c00000001d1d0118 which belongs to the cache kmalloc-8 of size 8 The buggy address is located 0 bytes inside of 8-byte region [c00000001d1d0118, c00000001d1d0120) The buggy address belongs to the physical page: page:c00c000000074740 refcount:1 mapcount:0 mapping:0000000000000000 index:0xc00000001d1d0558 pfn:0x1d1d flags: 0x7ffff000000200(slab|node=0|zone=0|lastcpupid=0x7ffff) raw: 007ffff000000200 c00000001d0003c8 c00000001d0003c8 c00000001d010480 raw: c00000001d1d0558 0000000001e1000a 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: c00000001d1d0000: fc 00 fc fc fc fc fc fc fc fc fc fc fc fc fc fc c00000001d1d0080: fc fc 00 fc fc fc fc fc fc fc fc fc fc fc fc fc >c00000001d1d0100: fc fc fc 02 fc fc fc fc fc fc fc fc fc fc fc fc ^ c00000001d1d0180: fc fc fc fc 04 fc fc fc fc fc fc fc fc fc fc fc c00000001d1d0200: fc fc fc fc fc 04 fc fc fc fc fc fc fc fc fc fc This happens because the allocation uses the wrong unit (bits) when it should pass (BITS_TO_LONGS(count) * sizeof(long)) or equivalent. With small numbers of bits, the allocated object can be smaller than sizeof(long), which results in invalid accesses. Use bitmap_zalloc() to allocate and initialize the irq bitmap, paired with bitmap_free() for consistency.Show less

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: avoid skb access on nf_stolen When verdict is NF_STOLEN, the skb might have been freed. When tracing is enabled, this can result in a use-after-free: 1. access to skb->nf_trace 2. access to skb->mark 3. computation of trace id 4. dump of packet payload To avoid 1, keep a cached copy of skb->nf_trace in the trace state struct. Refresh this copy whenever verdict is != STOLEN. Avoid 2 by skipping skb->mark access if verdict is STOLEN. 3 is avoided by precomputing the trace id. Only dump the packet when verdict is not "STOLEN".Show less

In the Linux kernel, the following vulnerability has been resolved: cpufreq: pmac32-cpufreq: Fix refcount leak bug In pmac_cpufreq_init_MacRISC3(), we need to add corresponding of_node_put() for the three node pointers whose refcount have been incremented by of_find_node_by_name().Show less

In the Linux kernel, the following vulnerability has been resolved: net: sfp: fix memory leak in sfp_probe() sfp_probe() allocates a memory chunk from sfp with sfp_alloc(). When devm_add_action() fails, sfp is not freed, which leads to a memory leak. We should use devm_add_action_or_reset() instead of devm_add_action().Show less

In the Linux kernel, the following vulnerability has been resolved: pinctrl: aspeed: Fix potential NULL dereference in aspeed_pinmux_set_mux() pdesc could be null but still dereference pdesc->name and it will lead to a null pointer access. So we move a null check before dereference.Show less

In the Linux kernel, the following vulnerability has been resolved: ASoC: Intel: sof_sdw: handle errors on card registration If the card registration fails, typically because of deferred probes, the device properties added for headset codecs are not removed, which leads to kernel oopses in driver bind/unbind tests. We already clean-up the device properties when the card is removed, this code can be moved as a helper and called upon card registration errors.Show less

In the Linux kernel, the following vulnerability has been resolved: ASoC: rt7*-sdw: harden jack_detect_handler Realtek headset codec drivers typically check if the card is instantiated before proceeding with the jack detection. The rt700, rt711 and rt711-sdca are however missing a check on the card pointer, which can lead to NULL dereferences encountered in driver bind/unbind tests.Show less

In the Linux kernel, the following vulnerability has been resolved: ASoC: rt711-sdca: fix kernel NULL pointer dereference when IO error The initial settings will be written before the codec probe function. But, the rt711->component doesn't be assigned yet. If IO error happened during initial settings operations, it will cause the kernel panic. This patch changed component->dev to slave->dev to fix this issue.Show less

In the Linux kernel, the following vulnerability has been resolved: serial: 8250: Fix PM usage_count for console handover When console is enabled, univ8250_console_setup() calls serial8250_console_setup() before .dev is set to uart_port. Therefore, it will not call pm_runtime_get_sync(). Later, when the actual driver is going to take over univ8250_console_exit() is called. As .dev is already set, serial8250_console_exit() makes pm_runtime_put_sync() call with usage count being zero triggering PM usage count warning (extra debug for univ8250_console_setup(), univ8250_console_exit(), and serial8250_register_ports()): [ 0.068987] univ8250_console_setup ttyS0 nodev [ 0.499670] printk: console [ttyS0] enabled [ 0.717955] printk: console [ttyS0] printing thread started [ 1.960163] serial8250_register_ports assigned dev for ttyS0 [ 1.976830] printk: console [ttyS0] disabled [ 1.976888] printk: console [ttyS0] printing thread stopped [ 1.977073] univ8250_console_exit ttyS0 usage:0 [ 1.977075] serial8250 serial8250: Runtime PM usage count underflow! [ 1.977429] dw-apb-uart.6: ttyS0 at MMIO 0x4010006000 (irq = 33, base_baud = 115200) is a 16550A [ 1.977812] univ8250_console_setup ttyS0 usage:2 [ 1.978167] printk: console [ttyS0] printing thread started [ 1.978203] printk: console [ttyS0] enabled To fix the issue, call pm_runtime_get_sync() in serial8250_register_ports() as soon as .dev is set for an uart_port if it has console enabled. This problem became apparent only recently because 82586a721595 ("PM: runtime: Avoid device usage count underflows") added the warning printout. I confirmed this problem also occurs with v5.18 (w/o the warning printout, obviously).Show less

In the Linux kernel, the following vulnerability has been resolved: power: supply: core: Fix boundary conditions in interpolation The functions power_supply_temp2resist_simple and power_supply_ocv2cap_simple handle boundary conditions incorrectly. The change was introduced in a4585ba2050f460f749bbaf2b67bd56c41e30283 ("power: supply: core: Use library interpolation"). There are two issues: First, the lines "high = i - 1" and "high = i" in ocv2cap have the wrong order compared to temp2resist. As a consequence, ocv2cap sets high=-1 if ocv>table[0].ocv, which causes an out-of-bounds read. Second, the logic of temp2resist is also not correct. Consider the case table[] = {{20, 100}, {10, 80}, {0, 60}}. For temp=5, we expect a resistance of 70% by interpolation. However, temp2resist sets high=low=2 and returns 60.Show less