Linux Kernel

In the Linux kernel, the following vulnerability has been resolved: net: caif: clear client service pointer on teardown `caif_connect()` can tear down an existing client after remote shutdown by calling `caif_disconnect_client()` followed by `caif_free_client()`. `caif_free_client()` releases the service layer referenced by `adap_layer->dn`, but leaves that pointer stale. When the socket is later destroyed, `caif_sock_destructor()` calls `caif_free_client()` again and dereferences the freed service pointer. Clear the client/service links before releasing the service object so repeated teardown becomes harmless.Show less

In the Linux kernel, the following vulnerability has been resolved: Input: edt-ft5x06 - fix use-after-free in debugfs teardown The commit 68743c500c6e ("Input: edt-ft5x06 - use per-client debugfs directory") removed the manual debugfs teardown, relying on the I2C core to handle it. However, this creates a window where debugfs files are still accessible after edt_ft5x06_ts_teardown_debugfs() frees tsdata->raw_buffer. To prevent a use-after-free, protect the freeing of raw_buffer with the device mutex and set raw_buffer to NULL. The debugfs read function already checks if raw_buffer is NULL under the same mutex, so this safely avoids the use-after-free.Show less

In the Linux kernel, the following vulnerability has been resolved: tpm2-sessions: Fix missing tpm_buf_destroy() in tpm2_read_public() tpm2_read_public() calls tpm_buf_init() but fails to call tpm_buf_destroy() on two exit paths, leaking a page allocation: 1. When name_size() returns an error (unrecognized hash algorithm), the function returns directly without destroying the buffer. 2. On the success path, the buffer is never destroyed before returning. All other error paths in the function correctly call tpm_buf_destroy() before returning. Fix both by adding the missing tpm_buf_destroy() calls.Show less

In the Linux kernel, the following vulnerability has been resolved: md/md-llbitmap: raise barrier before state machine transition Move the barrier raise operation before calling llbitmap_state_machine() in both llbitmap_start_write() and llbitmap_start_discard(). This ensures the barrier is in place before any state transitions occur, preventing potential race conditions where the state machine could complete before the barrier is properly raised.Show less

In the Linux kernel, the following vulnerability has been resolved: ext4: fix bounds check in check_xattrs() to prevent out-of-bounds access The bounds check for the next xattr entry in check_xattrs() uses (void *)next >= end, which allows next to point within sizeof(u32) bytes of end. On the next loop iteration, IS_LAST_ENTRY() reads 4 bytes via *(__u32 *)(entry), which can overrun the valid xattr region. For example, if next lands at end - 1, the check passes since next < end, but IS_LAST_ENTRY() reads 4 bytes starting at end - 1, accessing 3 bytes beyond the valid region. Fix this by changing the check to (void *)next + sizeof(u32) > end, ensuring there is always enough space for the IS_LAST_ENTRY() read on the subsequent iteration.Show less

In the Linux kernel, the following vulnerability has been resolved: mm/vmalloc: take vmap_purge_lock in shrinker decay_va_pool_node() can be invoked concurrently from two paths: __purge_vmap_area_lazy() when pools are being purged, and the shrinker via vmap_node_shrink_scan(). However, decay_va_pool_node() is not safe to run concurrently, and the shrinker path currently lacks serialization, leading to races and possible leaks. Protect decay_va_pool_node() by taking vmap_purge_lock in the shrinker path to ensure serialization with purge users.Show less

In the Linux kernel, the following vulnerability has been resolved: wifi: rtw88: check for PCI upstream bridge existence pci_upstream_bridge() returns NULL if the device is on a root bus. If 8821CE is installed in the system with such a PCI topology, the probing routine will crash. This has probably been unnoticed as 8821CE is mostly supplied in laptops where there is a PCI-to-PCI bridge located upstream from the device. However the card might be installed on a system with different configuration. Check if the bridge does exist for the specific workaround to be applied. Found by Linux Verification Center (linuxtesting.org) with Svace static analysis tool.Show less

In the Linux kernel, the following vulnerability has been resolved: media: rc: igorplugusb: heed coherency rules In a control request, the USB request structure can be subject to DMA on some HCs. Hence it must obey the rules for DMA coherency. Allocate it separately.Show less

In the Linux kernel, the following vulnerability has been resolved: ALSA: aloop: Fix peer runtime UAF during format-change stop loopback_check_format() may stop the capture side when playback starts with parameters that no longer match a running capture stream. Commit 826af7fa62e3 ("ALSA: aloop: Fix racy access at PCM trigger") moved the peer lookup under cable->lock, but the actual snd_pcm_stop() still runs after dropping that lock. A concurrent close can clear the capture entry from cable->streams[] and detach or free its runtime while the playback trigger path still holds a stale peer substream pointer. Keep a per-cable count of in-flight peer stops before dropping cable->lock, and make free_cable() wait for those stops before detaching the runtime. This preserves the existing behavior while making the peer runtime lifetime explicit.Show less

In the Linux kernel, the following vulnerability has been resolved: zram: do not forget to endio for partial discard requests As reported by Qu Wenruo and Avinesh Kumar, the following getconf PAGESIZE 65536 blkdiscard -p 4k /dev/zram0 takes literally forever to complete. zram doesn't support partial discards and just returns immediately w/o doing any discard work in such cases. The problem is that we forget to endio on our way out, so blkdiscard sleeps forever in submit_bio_wait(). Fix this by jumping to end_bio label, which does bio_endio().Show less

In the Linux kernel, the following vulnerability has been resolved: ALSA: control: Validate buf_len before strnlen() in snd_ctl_elem_init_enum_names() snd_ctl_elem_init_enum_names() advances pointer p through the names buffer while decrementing buf_len. If buf_len reaches zero but items remain, the next iteration calls strnlen(p, 0). While strnlen(p, 0) returns 0 and would hit the existing name_len == 0 error path, CONFIG_FORTIFY_SOURCE's fortified strnlen() first checks maxlen against __builtin_dynamic_object_size(). When Clang loses track of p's object size inside the loop, this triggers a BRK exception panic before the return value is examined. Add a buf_len == 0 guard at the loop entry to prevent calling fortified strnlen() on an exhausted buffer. Found by kernel fuzz testing through Xiaomi Smartphone.Show less

In the Linux kernel, the following vulnerability has been resolved: mm/damon/stat: fix memory leak on damon_start() failure in damon_stat_start() Destroy the DAMON context and reset the global pointer when damon_start() fails. Otherwise, the context allocated by damon_stat_build_ctx() is leaked, and the stale damon_stat_context pointer will be overwritten on the next enable attempt, making the old allocation permanently unreachable.Show less

In the Linux kernel, the following vulnerability has been resolved: net: bridge: use a stable FDB dst snapshot in RCU readers Local FDB entries can be rewritten in place by `fdb_delete_local()`, which updates `f->dst` to another port or to `NULL` while keeping the entry alive. Several bridge RCU readers inspect `f->dst`, including `br_fdb_fillbuf()` through the `brforward_read()` sysfs path. These readers currently load `f->dst` multiple times and can therefore observe inconsistent values across the check and later dereference. In `br_fdb_fillbuf()`, this means a concurrent local-FDB update can change `f->dst` after the NULL check and before the `port_no` dereference, leading to a NULL-ptr-deref. Fix this by taking a single `READ_ONCE()` snapshot of `f->dst` in each affected RCU reader and using that snapshot for the rest of the access sequence. Also publish the in-place `f->dst` updates in `fdb_delete_local()` with `WRITE_ONCE()` so the readers and writer use matching access patterns.Show less

In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix rxkad crypto unalignment handling Fix handling of a packet with a misaligned crypto length. Also handle non-ENOMEM errors from decryption by aborting. Further, remove the WARN_ON_ONCE() so that it can't be remotely triggered (a trace line can still be emitted).Show less

In the Linux kernel, the following vulnerability has been resolved: RDMA/mana_ib: Disable RX steering on RSS QP destroy When an RSS QP is destroyed (e.g. DPDK exit), mana_ib_destroy_qp_rss() destroys the RX WQ objects but does not disable vPort RX steering in firmware. This leaves stale steering configuration that still points to the destroyed RX objects. If traffic continues to arrive (e.g. peer VM is still transmitting) and the VF interface is subsequently brought up (mana_open), the firmware may deliver completions using stale CQ IDs from the old RX objects. These CQ IDs can be reused by the ethernet driver for new TX CQs, causing RX completions to land on TX CQs: WARNING: mana_poll_tx_cq+0x1b8/0x220 [mana] (is_sq == false) WARNING: mana_gd_process_eq_events+0x209/0x290 (cq_table lookup fails) Fix this by disabling vPort RX steering before destroying RX WQ objects. Note that mana_fence_rqs() cannot be used here because the fence completion is delivered on the CQ, which is polled by user-mode (e.g. DPDK) and not visible to the kernel driver. Refactor the disable logic into a shared mana_disable_vport_rx() in mana_en, exported for use by mana_ib, replacing the duplicate code. The ethernet driver's mana_dealloc_queues() is also updated to call this common function.Show less

In the Linux kernel, the following vulnerability has been resolved: spi: fix resource leaks on device setup failure Make sure to call controller cleanup() if spi_setup() fails while registering a device to avoid leaking any resources allocated by setup().Show less

In the Linux kernel, the following vulnerability has been resolved: KVM: SVM: Inject #UD for INVLPGA if EFER.SVME=0 INVLPGA should cause a #UD when EFER.SVME is not set. Add a check to properly inject #UD when EFER.SVME=0. [sean: tag for stable@]Show less

In the Linux kernel, the following vulnerability has been resolved: crypto: acomp - fix wrong pointer stored by acomp_save_req() acomp_save_req() stores &req->chain in req->base.data. When acomp_reqchain_done() is invoked on asynchronous completion, it receives &req->chain as the data argument but casts it directly to struct acomp_req. Since data points to the chain member, all subsequent field accesses are at a wrong offset, resulting in memory corruption. The issue occurs when an asynchronous hardware implementation, such as the QAT driver, completes a request that uses the DMA virtual address interface (e.g. acomp_request_set_src_dma()). This combination causes crypto_acomp_compress() to enter the acomp_do_req_chain() path, which sets acomp_reqchain_done() as the completion callback via acomp_save_req(). With KASAN enabled, this manifests as a general protection fault in acomp_reqchain_done(): general protection fault, probably for non-canonical address 0xe000040000000000 KASAN: probably user-memory-access in range [0x0000400000000000-0x0000400000000007] RIP: 0010:acomp_reqchain_done+0x15b/0x4e0 Call Trace: <IRQ> qat_comp_alg_callback+0x5d/0xa0 [intel_qat] adf_ring_response_handler+0x376/0x8b0 [intel_qat] adf_response_handler+0x60/0x170 [intel_qat] tasklet_action_common+0x223/0x820 handle_softirqs+0x1ab/0x640 </IRQ> Fix this by storing the request itself in req->base.data instead of &req->chain, so that acomp_reqchain_done() receives the correct pointer. Simplify acomp_restore_req() accordingly to access req->chain directly.Show less

In the Linux kernel, the following vulnerability has been resolved: ocfs2: split transactions in dio completion to avoid credit exhaustion During ocfs2 dio operations, JBD2 may report warnings via following call trace: ocfs2_dio_end_io_write ocfs2_mark_extent_written ocfs2_change_extent_flag ocfs2_split_extent ocfs2_try_to_merge_extent ocfs2_extend_rotate_transaction ocfs2_extend_trans jbd2__journal_restart start_this_handle output: JBD2: kworker/6:2 wants too many credits credits:5450 rsv_credits:0 max:5449 To prevent exceeding the credits limit, modify ocfs2_dio_end_io_write() to handle extents in a batch of transaction. Additionally, relocate ocfs2_del_inode_from_orphan(). The orphan inode should only be removed from the orphan list after the extent tree update is complete. This ensures that if a crash occurs in the middle of extent tree updates, we won't leave stale blocks beyond EOF. This patch also changes the logic for updating the inode size and removing orphan, making it similar to ext4_dio_write_end_io(). Both operations are performed only when everything looks good. Finally, thanks to Jans and Joseph for providing the bug fix prototype and suggestions.Show less

In the Linux kernel, the following vulnerability has been resolved: rbd: fix null-ptr-deref when device_add_disk() fails do_rbd_add() publishes the device with device_add() before calling device_add_disk(). If device_add_disk() fails after device_add() succeeds, the error path calls rbd_free_disk() directly and then later falls through to rbd_dev_device_release(), which calls rbd_free_disk() again. This double teardown can leave blk-mq cleanup operating on invalid state and trigger a null-ptr-deref in __blk_mq_free_map_and_rqs(), reached from blk_mq_free_tag_set(). Fix this by following the normal remove ordering: call device_del() before rbd_dev_device_release() when device_add_disk() fails after device_add(). That keeps the teardown sequence consistent and avoids re-entering disk cleanup through the wrong path. The bug was first flagged by an experimental analysis tool we are developing for kernel memory-management bugs while analyzing v6.13-rc1. The tool is still under development and is not yet publicly available. We reproduced the bug on v7.0 with a real Ceph backend and a QEMU x86_64 guest booted with KASAN and CONFIG_FAILSLAB enabled. The reproducer confines failslab injections to the __add_disk() range and injects fail-nth while mapping an RBD image through /sys/bus/rbd/add_single_major. On the unpatched kernel, fail-nth=4 reliably triggered the fault: Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 0 UID: 0 PID: 273 Comm: bash Not tainted 7.0.0-01247-gd60bc1401583 #6 PREEMPT(lazy) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014 RIP: 0010:__blk_mq_free_map_and_rqs+0x8c/0x240 Code: 00 00 48 8b 6b 60 41 89 f4 49 c1 e4 03 4c 01 e5 45 85 ed 0f 85 0a 01 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 e9 48 c1 e9 03 <80> 3c 01 00 0f 85 31 01 00 00 4c 8b 6d 00 4d 85 ed 0f 84 e2 00 00 RSP: 0018:ff1100000ab0fac8 EFLAGS: 00000246 RAX: dffffc0000000000 RBX: ff1100000c4806a0 RCX: 0000000000000000 RDX: 0000000000000002 RSI: 0000000000000000 RDI: ff1100000c4806f4 RBP: 0000000000000000 R08: 0000000000000001 R09: ffe21c000189001b R10: ff1100000c4800df R11: ff1100006cf37be0 R12: 0000000000000000 R13: 0000000000000000 R14: ff1100000c480700 R15: ff1100000c480004 FS: 00007f0fbe8fe740(0000) GS:ff110000e5851000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fe53473b2e0 CR3: 0000000012eef000 CR4: 00000000007516f0 PKRU: 55555554 Call Trace: <TASK> blk_mq_free_tag_set+0x77/0x460 do_rbd_add+0x1446/0x2b80 ? __pfx_do_rbd_add+0x10/0x10 ? lock_acquire+0x18c/0x300 ? find_held_lock+0x2b/0x80 ? sysfs_file_kobj+0xb6/0x1b0 ? __pfx_sysfs_kf_write+0x10/0x10 kernfs_fop_write_iter+0x2f4/0x4a0 vfs_write+0x98e/0x1000 ? expand_files+0x51f/0x850 ? __pfx_vfs_write+0x10/0x10 ksys_write+0xf2/0x1d0 ? __pfx_ksys_write+0x10/0x10 do_syscall_64+0x115/0x690 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f0fbea15907 Code: 10 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24 RSP: 002b:00007ffe22346ea8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000058 RCX: 00007f0fbea15907 RDX: 0000000000000058 RSI: 0000563ace6c0ef0 RDI: 0000000000000001 RBP: 0000563ace6c0ef0 R08: 0000563ace6c0ef0 R09: 6b6435726d694141 R10: 5250337279762f78 R11: 0000000000000246 R12: 0000000000000058 R13: 00007f0fbeb1c780 R14: ff1100000c480700 R15: ff1100000c480004 </TASK> With this fix applied, rerunning the reproducer over fail-nth=1..256 yields no KASAN reports. [ idryomov: rename err_out_device_del -> err_out_device ]Show less