Linux Kernel

In the Linux kernel, the following vulnerability has been resolved: ip_gre: test csum_start instead of transport header GRE with TUNNEL_CSUM will apply local checksum offload on CHECKSUM_PARTIAL packets. ipgre_xmit must validate csum_start after an optional skb_pull, else lco_csum may trigger an overflow. The original check was if (csum && skb_checksum_start(skb) < skb->data) return -EINVAL; This had false positives when skb_checksum_start is undefined: when ip_summed is not CHECKSUM_PARTIAL. A discussed refinement was straightforward if (csum && skb->ip_summed == CHECKSUM_PARTIAL && skb_checksum_start(skb) < skb->data) return -EINVAL; But was eventually revised more thoroughly: - restrict the check to the only branch where needed, in an uncommon GRE path that uses header_ops and calls skb_pull. - test skb_transport_header, which is set along with csum_start in skb_partial_csum_set in the normal header_ops datapath. Turns out skbs can arrive in this branch without the transport header set, e.g., through BPF redirection. Revise the check back to check csum_start directly, and only if CHECKSUM_PARTIAL. Do leave the check in the updated location. Check field regardless of whether TUNNEL_CSUM is configured.Show less

In the Linux kernel, the following vulnerability has been resolved: net: ipv6: unexport __init-annotated seg6_hmac_init() EXPORT_SYMBOL and __init is a bad combination because the .init.text section is freed up after the initialization. Hence, modules cannot use symbols annotated __init. The access to a freed symbol may end up with kernel panic. modpost used to detect it, but it has been broken for a decade. Recently, I fixed modpost so it started to warn it again, then this showed up in linux-next builds. There are two ways to fix it: - Remove __init - Remove EXPORT_SYMBOL I chose the latter for this case because the caller (net/ipv6/seg6.c) and the callee (net/ipv6/seg6_hmac.c) belong to the same module. It seems an internal function call in ipv6.ko.Show less

In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: CT: Fix cleanup of CT before cleanup of TC ct rules CT cleanup assumes that all tc rules were deleted first, and so is free to delete the CT shared resources (e.g the dr_action fwd_action which is shared for all tuples). But currently for uplink, this is happens in reverse, causing the below trace. CT cleanup is called from: mlx5e_cleanup_rep_tx()->mlx5e_cleanup_uplink_rep_tx()-> mlx5e_rep_tc_cleanup()->mlx5e_tc_esw_cleanup()-> mlx5_tc_ct_clean() Only afterwards, tc cleanup is called from: mlx5e_cleanup_rep_tx()->mlx5e_tc_ht_cleanup() which would have deleted all the tc ct rules, and so delete all the offloaded tuples. Fix this reversing the order of init and on cleanup, which will result in tc cleanup then ct cleanup. [ 9443.593347] WARNING: CPU: 2 PID: 206774 at drivers/net/ethernet/mellanox/mlx5/core/steering/dr_action.c:1882 mlx5dr_action_destroy+0x188/0x1a0 [mlx5_core] [ 9443.593349] Modules linked in: act_ct nf_flow_table rdma_ucm(O) rdma_cm(O) iw_cm(O) ib_ipoib(O) ib_cm(O) ib_umad(O) mlx5_core(O-) mlxfw(O) mlxdevm(O) auxiliary(O) ib_uverbs(O) psample ib_core(O) mlx_compat(O) ip_gre gre ip_tunnel act_vlan bonding geneve esp6_offload esp6 esp4_offload esp4 act_tunnel_key vxlan ip6_udp_tunnel udp_tunnel act_mirred act_skbedit act_gact cls_flower sch_ingress nfnetlink_cttimeout nfnetlink xfrm_user xfrm_algo 8021q garp stp ipmi_devintf mrp ipmi_msghandler llc openvswitch nsh nf_conncount nf_nat mst_pciconf(O) dm_multipath sbsa_gwdt uio_pdrv_genirq uio mlxbf_pmc mlxbf_pka mlx_trio mlx_bootctl(O) bluefield_edac sch_fq_codel ip_tables ipv6 crc_ccitt btrfs zstd_compress raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor xor_neon raid6_pq raid1 raid0 crct10dif_ce i2c_mlxbf gpio_mlxbf2 mlxbf_gige aes_neon_bs aes_neon_blk [last unloaded: mlx5_ib] [ 9443.593419] CPU: 2 PID: 206774 Comm: modprobe Tainted: G O 5.4.0-1023.24.gc14613d-bluefield #1 [ 9443.593422] Hardware name: https://www.mellanox.com BlueField SoC/BlueField SoC, BIOS BlueField:143ebaf Jan 11 2022 [ 9443.593424] pstate: 20000005 (nzCv daif -PAN -UAO) [ 9443.593489] pc : mlx5dr_action_destroy+0x188/0x1a0 [mlx5_core] [ 9443.593545] lr : mlx5_ct_fs_smfs_destroy+0x24/0x30 [mlx5_core] [ 9443.593546] sp : ffff8000135dbab0 [ 9443.593548] x29: ffff8000135dbab0 x28: ffff0003a6ab8e80 [ 9443.593550] x27: 0000000000000000 x26: ffff0003e07d7000 [ 9443.593552] x25: ffff800009609de0 x24: ffff000397fb2120 [ 9443.593554] x23: ffff0003975c0000 x22: 0000000000000000 [ 9443.593556] x21: ffff0003975f08c0 x20: ffff800009609de0 [ 9443.593558] x19: ffff0003c8a13380 x18: 0000000000000014 [ 9443.593560] x17: 0000000067f5f125 x16: 000000006529c620 [ 9443.593561] x15: 000000000000000b x14: 0000000000000000 [ 9443.593563] x13: 0000000000000002 x12: 0000000000000001 [ 9443.593565] x11: ffff800011108868 x10: 0000000000000000 [ 9443.593567] x9 : 0000000000000000 x8 : ffff8000117fb270 [ 9443.593569] x7 : ffff0003ebc01288 x6 : 0000000000000000 [ 9443.593571] x5 : ffff800009591ab8 x4 : fffffe000f6d9a20 [ 9443.593572] x3 : 0000000080040001 x2 : fffffe000f6d9a20 [ 9443.593574] x1 : ffff8000095901d8 x0 : 0000000000000025 [ 9443.593577] Call trace: [ 9443.593634] mlx5dr_action_destroy+0x188/0x1a0 [mlx5_core] [ 9443.593688] mlx5_ct_fs_smfs_destroy+0x24/0x30 [mlx5_core] [ 9443.593743] mlx5_tc_ct_clean+0x34/0xa8 [mlx5_core] [ 9443.593797] mlx5e_tc_esw_cleanup+0x58/0x88 [mlx5_core] [ 9443.593851] mlx5e_rep_tc_cleanup+0x24/0x30 [mlx5_core] [ 9443.593905] mlx5e_cleanup_rep_tx+0x6c/0x78 [mlx5_core] [ 9443.593959] mlx5e_detach_netdev+0x74/0x98 [mlx5_core] [ 9443.594013] mlx5e_netdev_change_profile+0x70/0x180 [mlx5_core] [ 9443.594067] mlx5e_netdev_attach_nic_profile+0x34/0x40 [mlx5_core] [ 9443.594122] mlx5e_vport_rep_unload+0x15c/0x1a8 [mlx5_core] [ 9443.594177] mlx5_eswitch_unregister_vport_reps+0x228/0x298 [mlx5_core] [ 9443.594231] mlx5e_rep_remove+0x2c/0x38 ---truncated---Show less

In the Linux kernel, the following vulnerability has been resolved: ocfs2: dlmfs: fix error handling of user_dlm_destroy_lock When user_dlm_destroy_lock failed, it didn't clean up the flags it set before exit. For USER_LOCK_IN_TEARDOWN, if this function fails because of lock is still in used, next time when unlink invokes this function, it will return succeed, and then unlink will remove inode and dentry if lock is not in used(file closed), but the dlm lock is still linked in dlm lock resource, then when bast come in, it will trigger a panic due to user-after-free. See the following panic call trace. To fix this, USER_LOCK_IN_TEARDOWN should be reverted if fail. And also error should be returned if USER_LOCK_IN_TEARDOWN is set to let user know that unlink fail. For the case of ocfs2_dlm_unlock failure, besides USER_LOCK_IN_TEARDOWN, USER_LOCK_BUSY is also required to be cleared. Even though spin lock is released in between, but USER_LOCK_IN_TEARDOWN is still set, for USER_LOCK_BUSY, if before every place that waits on this flag, USER_LOCK_IN_TEARDOWN is checked to bail out, that will make sure no flow waits on the busy flag set by user_dlm_destroy_lock(), then we can simplely revert USER_LOCK_BUSY when ocfs2_dlm_unlock fails. Fix user_dlm_cluster_lock() which is the only function not following this. [ 941.336392] (python,26174,16):dlmfs_unlink:562 ERROR: unlink 004fb0000060000b5a90b8c847b72e1, error -16 from destroy [ 989.757536] ------------[ cut here ]------------ [ 989.757709] kernel BUG at fs/ocfs2/dlmfs/userdlm.c:173! [ 989.757876] invalid opcode: 0000 [#1] SMP [ 989.758027] Modules linked in: ksplice_2zhuk2jr_ib_ipoib_new(O) ksplice_2zhuk2jr(O) mptctl mptbase xen_netback xen_blkback xen_gntalloc xen_gntdev xen_evtchn cdc_ether usbnet mii ocfs2 jbd2 rpcsec_gss_krb5 auth_rpcgss nfsv4 nfsv3 nfs_acl nfs fscache lockd grace ocfs2_dlmfs ocfs2_stack_o2cb ocfs2_dlm ocfs2_nodemanager ocfs2_stackglue configfs bnx2fc fcoe libfcoe libfc scsi_transport_fc sunrpc ipmi_devintf bridge stp llc rds_rdma rds bonding ib_sdp ib_ipoib rdma_ucm ib_ucm ib_uverbs ib_umad rdma_cm ib_cm iw_cm falcon_lsm_serviceable(PE) falcon_nf_netcontain(PE) mlx4_vnic falcon_kal(E) falcon_lsm_pinned_13402(E) mlx4_ib ib_sa ib_mad ib_core ib_addr xenfs xen_privcmd dm_multipath iTCO_wdt iTCO_vendor_support pcspkr sb_edac edac_core i2c_i801 lpc_ich mfd_core ipmi_ssif i2c_core ipmi_si ipmi_msghandler [ 989.760686] ioatdma sg ext3 jbd mbcache sd_mod ahci libahci ixgbe dca ptp pps_core vxlan udp_tunnel ip6_udp_tunnel megaraid_sas mlx4_core crc32c_intel be2iscsi bnx2i cnic uio cxgb4i cxgb4 cxgb3i libcxgbi ipv6 cxgb3 mdio libiscsi_tcp qla4xxx iscsi_boot_sysfs libiscsi scsi_transport_iscsi wmi dm_mirror dm_region_hash dm_log dm_mod [last unloaded: ksplice_2zhuk2jr_ib_ipoib_old] [ 989.761987] CPU: 10 PID: 19102 Comm: dlm_thread Tainted: P OE 4.1.12-124.57.1.el6uek.x86_64 #2 [ 989.762290] Hardware name: Oracle Corporation ORACLE SERVER X5-2/ASM,MOTHERBOARD,1U, BIOS 30350100 06/17/2021 [ 989.762599] task: ffff880178af6200 ti: ffff88017f7c8000 task.ti: ffff88017f7c8000 [ 989.762848] RIP: e030:[<ffffffffc07d4316>] [<ffffffffc07d4316>] __user_dlm_queue_lockres.part.4+0x76/0x80 [ocfs2_dlmfs] [ 989.763185] RSP: e02b:ffff88017f7cbcb8 EFLAGS: 00010246 [ 989.763353] RAX: 0000000000000000 RBX: ffff880174d48008 RCX: 0000000000000003 [ 989.763565] RDX: 0000000000120012 RSI: 0000000000000003 RDI: ffff880174d48170 [ 989.763778] RBP: ffff88017f7cbcc8 R08: ffff88021f4293b0 R09: 0000000000000000 [ 989.763991] R10: ffff880179c8c000 R11: 0000000000000003 R12: ffff880174d48008 [ 989.764204] R13: 0000000000000003 R14: ffff880179c8c000 R15: ffff88021db7a000 [ 989.764422] FS: 0000000000000000(0000) GS:ffff880247480000(0000) knlGS:ffff880247480000 [ 989.764685] CS: e033 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 989.764865] CR2: ffff8000007f6800 CR3: 0000000001ae0000 CR4: 0000000000042660 [ 989.765081] Stack: [ 989.765167] 00000000000 ---truncated---Show less

In the Linux kernel, the following vulnerability has been resolved: drm/etnaviv: check for reaped mapping in etnaviv_iommu_unmap_gem When the mapping is already reaped the unmap must be a no-op, as we would otherwise try to remove the mapping twice, corrupting the involved data structures.Show less

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/cs: make commands with 0 chunks illegal behaviour. Submitting a cs with 0 chunks, causes an oops later, found trying to execute the wrong userspace driver. MESA_LOADER_DRIVER_OVERRIDE=v3d glxinfo [172536.665184] BUG: kernel NULL pointer dereference, address: 00000000000001d8 [172536.665188] #PF: supervisor read access in kernel mode [172536.665189] #PF: error_code(0x0000) - not-present page [172536.665191] PGD 6712a0067 P4D 6712a0067 PUD 5af9ff067 PMD 0 [172536.665195] Oops: 0000 [#1] SMP NOPTI [172536.665197] CPU: 7 PID: 2769838 Comm: glxinfo Tainted: P O 5.10.81 #1-NixOS [172536.665199] Hardware name: To be filled by O.E.M. To be filled by O.E.M./CROSSHAIR V FORMULA-Z, BIOS 2201 03/23/2015 [172536.665272] RIP: 0010:amdgpu_cs_ioctl+0x96/0x1ce0 [amdgpu] [172536.665274] Code: 75 18 00 00 4c 8b b2 88 00 00 00 8b 46 08 48 89 54 24 68 49 89 f7 4c 89 5c 24 60 31 d2 4c 89 74 24 30 85 c0 0f 85 c0 01 00 00 <48> 83 ba d8 01 00 00 00 48 8b b4 24 90 00 00 00 74 16 48 8b 46 10 [172536.665276] RSP: 0018:ffffb47c0e81bbe0 EFLAGS: 00010246 [172536.665277] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 [172536.665278] RDX: 0000000000000000 RSI: ffffb47c0e81be28 RDI: ffffb47c0e81bd68 [172536.665279] RBP: ffff936524080010 R08: 0000000000000000 R09: ffffb47c0e81be38 [172536.665281] R10: ffff936524080010 R11: ffff936524080000 R12: ffffb47c0e81bc40 [172536.665282] R13: ffffb47c0e81be28 R14: ffff9367bc410000 R15: ffffb47c0e81be28 [172536.665283] FS: 00007fe35e05d740(0000) GS:ffff936c1edc0000(0000) knlGS:0000000000000000 [172536.665284] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [172536.665286] CR2: 00000000000001d8 CR3: 0000000532e46000 CR4: 00000000000406e0 [172536.665287] Call Trace: [172536.665322] ? amdgpu_cs_find_mapping+0x110/0x110 [amdgpu] [172536.665332] drm_ioctl_kernel+0xaa/0xf0 [drm] [172536.665338] drm_ioctl+0x201/0x3b0 [drm] [172536.665369] ? amdgpu_cs_find_mapping+0x110/0x110 [amdgpu] [172536.665372] ? selinux_file_ioctl+0x135/0x230 [172536.665399] amdgpu_drm_ioctl+0x49/0x80 [amdgpu] [172536.665403] __x64_sys_ioctl+0x83/0xb0 [172536.665406] do_syscall_64+0x33/0x40 [172536.665409] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2018Show less

In the Linux kernel, the following vulnerability has been resolved: mm/huge_memory: Fix xarray node memory leak If xas_split_alloc() fails to allocate the necessary nodes to complete the xarray entry split, it sets the xa_state to -ENOMEM, which xas_nomem() then interprets as "Please allocate more memory", not as "Please free any unnecessary memory" (which was the intended outcome). It's confusing to use xas_nomem() to free memory in this context, so call xas_destroy() instead.Show less

In the Linux kernel, the following vulnerability has been resolved: net/mlx5: E-Switch, pair only capable devices OFFLOADS paring using devcom is possible only on devices that support LAG. Filter based on lag capabilities. This fixes an issue where mlx5_get_next_phys_dev() was called without holding the interface lock. This issue was found when commit bc4c2f2e0179 ("net/mlx5: Lag, filter non compatible devices") added an assert that verifies the interface lock is held. WARNING: CPU: 9 PID: 1706 at drivers/net/ethernet/mellanox/mlx5/core/dev.c:642 mlx5_get_next_phys_dev+0xd2/0x100 [mlx5_core] Modules linked in: mlx5_vdpa vringh vhost_iotlb vdpa mlx5_ib mlx5_core xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi rdma_cm iw_cm ib_umad ib_ipoib ib_cm ib_uverbs ib_core overlay fuse [last unloaded: mlx5_core] CPU: 9 PID: 1706 Comm: devlink Not tainted 5.18.0-rc7+ #11 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:mlx5_get_next_phys_dev+0xd2/0x100 [mlx5_core] Code: 02 00 75 48 48 8b 85 80 04 00 00 5d c3 31 c0 5d c3 be ff ff ff ff 48 c7 c7 08 41 5b a0 e8 36 87 28 e3 85 c0 0f 85 6f ff ff ff <0f> 0b e9 68 ff ff ff 48 c7 c7 0c 91 cc 84 e8 cb 36 6f e1 e9 4d ff RSP: 0018:ffff88811bf47458 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff88811b398000 RCX: 0000000000000001 RDX: 0000000080000000 RSI: ffffffffa05b4108 RDI: ffff88812daaaa78 RBP: ffff88812d050380 R08: 0000000000000001 R09: ffff88811d6b3437 R10: 0000000000000001 R11: 00000000fddd3581 R12: ffff88815238c000 R13: ffff88812d050380 R14: ffff8881018aa7e0 R15: ffff88811d6b3428 FS: 00007fc82e18ae80(0000) GS:ffff88842e080000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f9630d1b421 CR3: 0000000149802004 CR4: 0000000000370ea0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> mlx5_esw_offloads_devcom_event+0x99/0x3b0 [mlx5_core] mlx5_devcom_send_event+0x167/0x1d0 [mlx5_core] esw_offloads_enable+0x1153/0x1500 [mlx5_core] ? mlx5_esw_offloads_controller_valid+0x170/0x170 [mlx5_core] ? wait_for_completion_io_timeout+0x20/0x20 ? mlx5_rescan_drivers_locked+0x318/0x810 [mlx5_core] mlx5_eswitch_enable_locked+0x586/0xc50 [mlx5_core] ? mlx5_eswitch_disable_pf_vf_vports+0x1d0/0x1d0 [mlx5_core] ? mlx5_esw_try_lock+0x1b/0xb0 [mlx5_core] ? mlx5_eswitch_enable+0x270/0x270 [mlx5_core] ? __debugfs_create_file+0x260/0x3e0 mlx5_devlink_eswitch_mode_set+0x27e/0x870 [mlx5_core] ? mutex_lock_io_nested+0x12c0/0x12c0 ? esw_offloads_disable+0x250/0x250 [mlx5_core] ? devlink_nl_cmd_trap_get_dumpit+0x470/0x470 ? rcu_read_lock_sched_held+0x3f/0x70 devlink_nl_cmd_eswitch_set_doit+0x217/0x620Show less

In the Linux kernel, the following vulnerability has been resolved: scsi: lpfc: Address NULL pointer dereference after starget_to_rport() Calls to starget_to_rport() may return NULL. Add check for NULL rport before dereference.Show less

In the Linux kernel, the following vulnerability has been resolved: nfc: st21nfca: fix memory leaks in EVT_TRANSACTION handling Error paths do not free previously allocated memory. Add devm_kfree() to those failure paths.Show less

In the Linux kernel, the following vulnerability has been resolved: tcp: fix tcp_mtup_probe_success vs wrong snd_cwnd syzbot got a new report [1] finally pointing to a very old bug, added in initial support for MTU probing. tcp_mtu_probe() has checks about starting an MTU probe if tcp_snd_cwnd(tp) >= 11. But nothing prevents tcp_snd_cwnd(tp) to be reduced later and before the MTU probe succeeds. This bug would lead to potential zero-divides. Debugging added in commit 40570375356c ("tcp: add accessors to read/set tp->snd_cwnd") has paid off :) While we are at it, address potential overflows in this code. [1] WARNING: CPU: 1 PID: 14132 at include/net/tcp.h:1219 tcp_mtup_probe_success+0x366/0x570 net/ipv4/tcp_input.c:2712 Modules linked in: CPU: 1 PID: 14132 Comm: syz-executor.2 Not tainted 5.18.0-syzkaller-07857-gbabf0bb978e3 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:tcp_snd_cwnd_set include/net/tcp.h:1219 [inline] RIP: 0010:tcp_mtup_probe_success+0x366/0x570 net/ipv4/tcp_input.c:2712 Code: 74 08 48 89 ef e8 da 80 17 f9 48 8b 45 00 65 48 ff 80 80 03 00 00 48 83 c4 30 5b 41 5c 41 5d 41 5e 41 5f 5d c3 e8 aa b0 c5 f8 <0f> 0b e9 16 fe ff ff 48 8b 4c 24 08 80 e1 07 38 c1 0f 8c c7 fc ff RSP: 0018:ffffc900079e70f8 EFLAGS: 00010287 RAX: ffffffff88c0f7f6 RBX: ffff8880756e7a80 RCX: 0000000000040000 RDX: ffffc9000c6c4000 RSI: 0000000000031f9e RDI: 0000000000031f9f RBP: 0000000000000000 R08: ffffffff88c0f606 R09: ffffc900079e7520 R10: ffffed101011226d R11: 1ffff1101011226c R12: 1ffff1100eadcf50 R13: ffff8880756e72c0 R14: 1ffff1100eadcf89 R15: dffffc0000000000 FS: 00007f643236e700(0000) GS:ffff8880b9b00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f1ab3f1e2a0 CR3: 0000000064fe7000 CR4: 00000000003506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> tcp_clean_rtx_queue+0x223a/0x2da0 net/ipv4/tcp_input.c:3356 tcp_ack+0x1962/0x3c90 net/ipv4/tcp_input.c:3861 tcp_rcv_established+0x7c8/0x1ac0 net/ipv4/tcp_input.c:5973 tcp_v6_do_rcv+0x57b/0x1210 net/ipv6/tcp_ipv6.c:1476 sk_backlog_rcv include/net/sock.h:1061 [inline] __release_sock+0x1d8/0x4c0 net/core/sock.c:2849 release_sock+0x5d/0x1c0 net/core/sock.c:3404 sk_stream_wait_memory+0x700/0xdc0 net/core/stream.c:145 tcp_sendmsg_locked+0x111d/0x3fc0 net/ipv4/tcp.c:1410 tcp_sendmsg+0x2c/0x40 net/ipv4/tcp.c:1448 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg net/socket.c:734 [inline] __sys_sendto+0x439/0x5c0 net/socket.c:2119 __do_sys_sendto net/socket.c:2131 [inline] __se_sys_sendto net/socket.c:2127 [inline] __x64_sys_sendto+0xda/0xf0 net/socket.c:2127 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 RIP: 0033:0x7f6431289109 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f643236e168 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 00007f643139c100 RCX: 00007f6431289109 RDX: 00000000d0d0c2ac RSI: 0000000020000080 RDI: 000000000000000a RBP: 00007f64312e308d R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000246 R12: 0000000000000000 R13: 00007fff372533af R14: 00007f643236e300 R15: 0000000000022000Show less

In the Linux kernel, the following vulnerability has been resolved: vduse: Fix NULL pointer dereference on sysfs access The control device has no drvdata. So we will get a NULL pointer dereference when accessing control device's msg_timeout attribute via sysfs: [ 132.841881][ T3644] BUG: kernel NULL pointer dereference, address: 00000000000000f8 [ 132.850619][ T3644] RIP: 0010:msg_timeout_show (drivers/vdpa/vdpa_user/vduse_dev.c:1271) [ 132.869447][ T3644] dev_attr_show (drivers/base/core.c:2094) [ 132.870215][ T3644] sysfs_kf_seq_show (fs/sysfs/file.c:59) [ 132.871164][ T3644] ? device_remove_bin_file (drivers/base/core.c:2088) [ 132.872082][ T3644] kernfs_seq_show (fs/kernfs/file.c:164) [ 132.872838][ T3644] seq_read_iter (fs/seq_file.c:230) [ 132.873578][ T3644] ? __vmalloc_area_node (mm/vmalloc.c:3041) [ 132.874532][ T3644] kernfs_fop_read_iter (fs/kernfs/file.c:238) [ 132.875513][ T3644] __kernel_read (fs/read_write.c:440 (discriminator 1)) [ 132.876319][ T3644] kernel_read (fs/read_write.c:459) [ 132.877129][ T3644] kernel_read_file (fs/kernel_read_file.c:94) [ 132.877978][ T3644] kernel_read_file_from_fd (include/linux/file.h:45 fs/kernel_read_file.c:186) [ 132.879019][ T3644] __do_sys_finit_module (kernel/module.c:4207) [ 132.879930][ T3644] __ia32_sys_finit_module (kernel/module.c:4189) [ 132.880930][ T3644] do_int80_syscall_32 (arch/x86/entry/common.c:112 arch/x86/entry/common.c:132) [ 132.881847][ T3644] entry_INT80_compat (arch/x86/entry/entry_64_compat.S:419) To fix it, don't create the unneeded attribute for control device anymore.Show less

In the Linux kernel, the following vulnerability has been resolved: mt76: fix use-after-free by removing a non-RCU wcid pointer Fixes an issue caught by KASAN about use-after-free in mt76_txq_schedule by protecting mtxq->wcid with rcu_lock between mt76_txq_schedule and sta_info_[alloc, free]. [18853.876689] ================================================================== [18853.876751] BUG: KASAN: use-after-free in mt76_txq_schedule+0x204/0xaf8 [mt76] [18853.876773] Read of size 8 at addr ffffffaf989a2138 by task mt76-tx phy0/883 [18853.876786] [18853.876810] CPU: 5 PID: 883 Comm: mt76-tx phy0 Not tainted 5.10.100-fix-510-56778d365941-kasan #5 0b01fbbcf41a530f52043508fec2e31a4215 [18853.876840] Call trace: [18853.876861] dump_backtrace+0x0/0x3ec [18853.876878] show_stack+0x20/0x2c [18853.876899] dump_stack+0x11c/0x1ac [18853.876918] print_address_description+0x74/0x514 [18853.876934] kasan_report+0x134/0x174 [18853.876948] __asan_report_load8_noabort+0x44/0x50 [18853.876976] mt76_txq_schedule+0x204/0xaf8 [mt76 074e03e4640e97fe7405ee1fab547b81c4fa45d2] [18853.877002] mt76_txq_schedule_all+0x2c/0x48 [mt76 074e03e4640e97fe7405ee1fab547b81c4fa45d2] [18853.877030] mt7921_tx_worker+0xa0/0x1cc [mt7921_common f0875ebac9d7b4754e1010549e7db50fbd90a047] [18853.877054] __mt76_worker_fn+0x190/0x22c [mt76 074e03e4640e97fe7405ee1fab547b81c4fa45d2] [18853.877071] kthread+0x2f8/0x3b8 [18853.877087] ret_from_fork+0x10/0x30 [18853.877098] [18853.877112] Allocated by task 941: [18853.877131] kasan_save_stack+0x38/0x68 [18853.877147] __kasan_kmalloc+0xd4/0xfc [18853.877163] kasan_kmalloc+0x10/0x1c [18853.877177] __kmalloc+0x264/0x3c4 [18853.877294] sta_info_alloc+0x460/0xf88 [mac80211] [18853.877410] ieee80211_prep_connection+0x204/0x1ee0 [mac80211] [18853.877523] ieee80211_mgd_auth+0x6c4/0xa4c [mac80211] [18853.877635] ieee80211_auth+0x20/0x2c [mac80211] [18853.877733] rdev_auth+0x7c/0x438 [cfg80211] [18853.877826] cfg80211_mlme_auth+0x26c/0x390 [cfg80211] [18853.877919] nl80211_authenticate+0x6d4/0x904 [cfg80211] [18853.877938] genl_rcv_msg+0x748/0x93c [18853.877954] netlink_rcv_skb+0x160/0x2a8 [18853.877969] genl_rcv+0x3c/0x54 [18853.877985] netlink_unicast_kernel+0x104/0x1ec [18853.877999] netlink_unicast+0x178/0x268 [18853.878015] netlink_sendmsg+0x3cc/0x5f0 [18853.878030] sock_sendmsg+0xb4/0xd8 [18853.878043] ____sys_sendmsg+0x2f8/0x53c [18853.878058] ___sys_sendmsg+0xe8/0x150 [18853.878071] __sys_sendmsg+0xc4/0x1f4 [18853.878087] __arm64_compat_sys_sendmsg+0x88/0x9c [18853.878101] el0_svc_common+0x1b4/0x390 [18853.878115] do_el0_svc_compat+0x8c/0xdc [18853.878131] el0_svc_compat+0x10/0x1c [18853.878146] el0_sync_compat_handler+0xa8/0xcc [18853.878161] el0_sync_compat+0x188/0x1c0 [18853.878171] [18853.878183] Freed by task 10927: [18853.878200] kasan_save_stack+0x38/0x68 [18853.878215] kasan_set_track+0x28/0x3c [18853.878228] kasan_set_free_info+0x24/0x48 [18853.878244] __kasan_slab_free+0x11c/0x154 [18853.878259] kasan_slab_free+0x14/0x24 [18853.878273] slab_free_freelist_hook+0xac/0x1b0 [18853.878287] kfree+0x104/0x390 [18853.878402] sta_info_free+0x198/0x210 [mac80211] [18853.878515] __sta_info_destroy_part2+0x230/0x2d4 [mac80211] [18853.878628] __sta_info_flush+0x300/0x37c [mac80211] [18853.878740] ieee80211_set_disassoc+0x2cc/0xa7c [mac80211] [18853.878851] ieee80211_mgd_deauth+0x4a4/0x10a0 [mac80211] [18853.878962] ieee80211_deauth+0x20/0x2c [mac80211] [18853.879057] rdev_deauth+0x7c/0x438 [cfg80211] [18853.879150] cfg80211_mlme_deauth+0x274/0x414 [cfg80211] [18853.879243] cfg80211_mlme_down+0xe4/0x118 [cfg80211] [18853.879335] cfg80211_disconnect+0x218/0x2d8 [cfg80211] [18853.879427] __cfg80211_leave+0x17c/0x240 [cfg80211] [18853.879519] cfg80211_leave+0x3c/0x58 [cfg80211] [18853.879611] wiphy_suspend+0xdc/0x200 [cfg80211] [18853.879628] dpm_run_callback+0x58/0x408 [18853.879642] __device_suspend+0x4cc/0x864 [18853.879658] async_suspend+0x34/0xf4 [18 ---truncated---Show less

In the Linux kernel, the following vulnerability has been resolved: bcache: avoid journal no-space deadlock by reserving 1 journal bucket The journal no-space deadlock was reported time to time. Such deadlock can happen in the following situation. When all journal buckets are fully filled by active jset with heavy write I/O load, the cache set registration (after a reboot) will load all active jsets and inserting them into the btree again (which is called journal replay). If a journaled bkey is inserted into a btree node and results btree node split, new journal request might be triggered. For example, the btree grows one more level after the node split, then the root node record in cache device super block will be upgrade by bch_journal_meta() from bch_btree_set_root(). But there is no space in journal buckets, the journal replay has to wait for new journal bucket to be reclaimed after at least one journal bucket replayed. This is one example that how the journal no-space deadlock happens. The solution to avoid the deadlock is to reserve 1 journal bucket in run time, and only permit the reserved journal bucket to be used during cache set registration procedure for things like journal replay. Then the journal space will never be fully filled, there is no chance for journal no-space deadlock to happen anymore. This patch adds a new member "bool do_reserve" in struct journal, it is inititalized to 0 (false) when struct journal is allocated, and set to 1 (true) by bch_journal_space_reserve() when all initialization done in run_cache_set(). In the run time when journal_reclaim() tries to allocate a new journal bucket, free_journal_buckets() is called to check whether there are enough free journal buckets to use. If there is only 1 free journal bucket and journal->do_reserve is 1 (true), the last bucket is reserved and free_journal_buckets() will return 0 to indicate no free journal bucket. Then journal_reclaim() will give up, and try next time to see whetheer there is free journal bucket to allocate. By this method, there is always 1 jouranl bucket reserved in run time. During the cache set registration, journal->do_reserve is 0 (false), so the reserved journal bucket can be used to avoid the no-space deadlock.Show less

In the Linux kernel, the following vulnerability has been resolved: rtl818x: Prevent using not initialized queues Using not existing queues can panic the kernel with rtl8180/rtl8185 cards. Ignore the skb priority for those cards, they only have one tx queue. Pierre Asselin (pa@panix.com) reported the kernel crash in the Gentoo forum: https://forums.gentoo.org/viewtopic-t-1147832-postdays-0-postorder-asc-start-25.html He also confirmed that this patch fixes the issue. In summary this happened: After updating wpa_supplicant from 2.9 to 2.10 the kernel crashed with a "divide error: 0000" when connecting to an AP. Control port tx now tries to use IEEE80211_AC_VO for the priority, which wpa_supplicants starts to use in 2.10. Since only the rtl8187se part of the driver supports QoS, the priority of the skb is set to IEEE80211_AC_BE (2) by mac80211 for rtl8180/rtl8185 cards. rtl8180 is then unconditionally reading out the priority and finally crashes on drivers/net/wireless/realtek/rtl818x/rtl8180/dev.c line 544 without this patch: idx = (ring->idx + skb_queue_len(&ring->queue)) % ring->entries "ring->entries" is zero for rtl8180/rtl8185 cards, tx_ring[2] never got initialized.Show less

In the Linux kernel, the following vulnerability has been resolved: tcp: add accessors to read/set tp->snd_cwnd We had various bugs over the years with code breaking the assumption that tp->snd_cwnd is greater than zero. Lately, syzbot reported the WARN_ON_ONCE(!tp->prior_cwnd) added in commit 8b8a321ff72c ("tcp: fix zero cwnd in tcp_cwnd_reduction") can trigger, and without a repro we would have to spend considerable time finding the bug. Instead of complaining too late, we want to catch where and when tp->snd_cwnd is set to an illegal value.Show less

In the Linux kernel, the following vulnerability has been resolved: mips: cpc: Fix refcount leak in mips_cpc_default_phys_base Add the missing of_node_put() to release the refcount incremented by of_find_compatible_node().Show less

In the Linux kernel, the following vulnerability has been resolved: iommu/arm-smmu: fix possible null-ptr-deref in arm_smmu_device_probe() It will cause null-ptr-deref when using 'res', if platform_get_resource() returns NULL, so move using 'res' after devm_ioremap_resource() that will check it to avoid null-ptr-deref. And use devm_platform_get_and_ioremap_resource() to simplify code.Show less

In the Linux kernel, the following vulnerability has been resolved: tracing: Fix sleeping function called from invalid context on RT kernel When setting bootparams="trace_event=initcall:initcall_start tp_printk=1" in the cmdline, the output_printk() was called, and the spin_lock_irqsave() was called in the atomic and irq disable interrupt context suitation. On the PREEMPT_RT kernel, these locks are replaced with sleepable rt-spinlock, so the stack calltrace will be triggered. Fix it by raw_spin_lock_irqsave when PREEMPT_RT and "trace_event=initcall:initcall_start tp_printk=1" enabled. BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:46 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 1, name: swapper/0 preempt_count: 2, expected: 0 RCU nest depth: 0, expected: 0 Preemption disabled at: [<ffffffff8992303e>] try_to_wake_up+0x7e/0xba0 CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.17.1-rt17+ #19 34c5812404187a875f32bee7977f7367f9679ea7 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x60/0x8c dump_stack+0x10/0x12 __might_resched.cold+0x11d/0x155 rt_spin_lock+0x40/0x70 trace_event_buffer_commit+0x2fa/0x4c0 ? map_vsyscall+0x93/0x93 trace_event_raw_event_initcall_start+0xbe/0x110 ? perf_trace_initcall_finish+0x210/0x210 ? probe_sched_wakeup+0x34/0x40 ? ttwu_do_wakeup+0xda/0x310 ? trace_hardirqs_on+0x35/0x170 ? map_vsyscall+0x93/0x93 do_one_initcall+0x217/0x3c0 ? trace_event_raw_event_initcall_level+0x170/0x170 ? push_cpu_stop+0x400/0x400 ? cblist_init_generic+0x241/0x290 kernel_init_freeable+0x1ac/0x347 ? _raw_spin_unlock_irq+0x65/0x80 ? rest_init+0xf0/0xf0 kernel_init+0x1e/0x150 ret_from_fork+0x22/0x30 </TASK>Show less

In the Linux kernel, the following vulnerability has been resolved: xprtrdma: treat all calls not a bcall when bc_serv is NULL When a rdma server returns a fault format reply, nfs v3 client may treats it as a bcall when bc service is not exist. The debug message at rpcrdma_bc_receive_call are, [56579.837169] RPC: rpcrdma_bc_receive_call: callback XID 00000001, length=20 [56579.837174] RPC: rpcrdma_bc_receive_call: 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 04 After that, rpcrdma_bc_receive_call will meets NULL pointer as, [ 226.057890] BUG: unable to handle kernel NULL pointer dereference at 00000000000000c8 ... [ 226.058704] RIP: 0010:_raw_spin_lock+0xc/0x20 ... [ 226.059732] Call Trace: [ 226.059878] rpcrdma_bc_receive_call+0x138/0x327 [rpcrdma] [ 226.060011] __ib_process_cq+0x89/0x170 [ib_core] [ 226.060092] ib_cq_poll_work+0x26/0x80 [ib_core] [ 226.060257] process_one_work+0x1a7/0x360 [ 226.060367] ? create_worker+0x1a0/0x1a0 [ 226.060440] worker_thread+0x30/0x390 [ 226.060500] ? create_worker+0x1a0/0x1a0 [ 226.060574] kthread+0x116/0x130 [ 226.060661] ? kthread_flush_work_fn+0x10/0x10 [ 226.060724] ret_from_fork+0x35/0x40 ...Show less