Linux Kernel

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to do sanity check for inline inode Yanming reported a kernel bug in Bugzilla kernel [1], which can be reproduced. The bug message is: The kernel message is shown below: kernel BUG at fs/inode.c:611! Call Trace: evict+0x282/0x4e0 __dentry_kill+0x2b2/0x4d0 dput+0x2dd/0x720 do_renameat2+0x596/0x970 __x64_sys_rename+0x78/0x90 do_syscall_64+0x3b/0x90 [1] https://bugzilla.kernel.org/show_bug.cgi?id=215895 The bug is due to fuzzed inode has both inline_data and encrypted flags. During f2fs_evict_inode(), as the inode was deleted by rename(), it will cause inline data conversion due to conflicting flags. The page cache will be polluted and the panic will be triggered in clear_inode(). Try fixing the bug by doing more sanity checks for inline data inode in sanity_check_inode().Show less

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to do sanity check on total_data_blocks As Yanming reported in bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=215916 The kernel message is shown below: kernel BUG at fs/f2fs/segment.c:2560! Call Trace: allocate_segment_by_default+0x228/0x440 f2fs_allocate_data_block+0x13d1/0x31f0 do_write_page+0x18d/0x710 f2fs_outplace_write_data+0x151/0x250 f2fs_do_write_data_page+0xef9/0x1980 move_data_page+0x6af/0xbc0 do_garbage_collect+0x312f/0x46f0 f2fs_gc+0x6b0/0x3bc0 f2fs_balance_fs+0x921/0x2260 f2fs_write_single_data_page+0x16be/0x2370 f2fs_write_cache_pages+0x428/0xd00 f2fs_write_data_pages+0x96e/0xd50 do_writepages+0x168/0x550 __writeback_single_inode+0x9f/0x870 writeback_sb_inodes+0x47d/0xb20 __writeback_inodes_wb+0xb2/0x200 wb_writeback+0x4bd/0x660 wb_workfn+0x5f3/0xab0 process_one_work+0x79f/0x13e0 worker_thread+0x89/0xf60 kthread+0x26a/0x300 ret_from_fork+0x22/0x30 RIP: 0010:new_curseg+0xe8d/0x15f0 The root cause is: ckpt.valid_block_count is inconsistent with SIT table, stat info indicates filesystem has free blocks, but SIT table indicates filesystem has no free segment. So that during garbage colloection, it triggers panic when LFS allocator fails to find free segment. This patch tries to fix this issue by checking consistency in between ckpt.valid_block_count and block accounted from SIT.Show less

In the Linux kernel, the following vulnerability has been resolved: drm/panfrost: Job should reference MMU not file_priv For a while now it's been allowed for a MMU context to outlive it's corresponding panfrost_priv, however the job structure still references panfrost_priv to get hold of the MMU context. If panfrost_priv has been freed this is a use-after-free which I've been able to trigger resulting in a splat. To fix this, drop the reference to panfrost_priv in the job structure and add a direct reference to the MMU structure which is what's actually needed.Show less

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: memleak flow rule from commit path Abort path release flow rule object, however, commit path does not. Update code to destroy these objects before releasing the transaction.Show less

In the Linux kernel, the following vulnerability has been resolved: efi: Do not import certificates from UEFI Secure Boot for T2 Macs On Apple T2 Macs, when Linux attempts to read the db and dbx efi variables at early boot to load UEFI Secure Boot certificates, a page fault occurs in Apple firmware code and EFI runtime services are disabled with the following logs: [Firmware Bug]: Page fault caused by firmware at PA: 0xffffb1edc0068000 WARNING: CPU: 3 PID: 104 at arch/x86/platform/efi/quirks.c:735 efi_crash_gracefully_on_page_fault+0x50/0xf0 (Removed some logs from here) Call Trace: <TASK> page_fault_oops+0x4f/0x2c0 ? search_bpf_extables+0x6b/0x80 ? search_module_extables+0x50/0x80 ? search_exception_tables+0x5b/0x60 kernelmode_fixup_or_oops+0x9e/0x110 __bad_area_nosemaphore+0x155/0x190 bad_area_nosemaphore+0x16/0x20 do_kern_addr_fault+0x8c/0xa0 exc_page_fault+0xd8/0x180 asm_exc_page_fault+0x1e/0x30 (Removed some logs from here) ? __efi_call+0x28/0x30 ? switch_mm+0x20/0x30 ? efi_call_rts+0x19a/0x8e0 ? process_one_work+0x222/0x3f0 ? worker_thread+0x4a/0x3d0 ? kthread+0x17a/0x1a0 ? process_one_work+0x3f0/0x3f0 ? set_kthread_struct+0x40/0x40 ? ret_from_fork+0x22/0x30 </TASK> ---[ end trace 1f82023595a5927f ]--- efi: Froze efi_rts_wq and disabled EFI Runtime Services integrity: Couldn't get size: 0x8000000000000015 integrity: MODSIGN: Couldn't get UEFI db list efi: EFI Runtime Services are disabled! integrity: Couldn't get size: 0x8000000000000015 integrity: Couldn't get UEFI dbx list integrity: Couldn't get size: 0x8000000000000015 integrity: Couldn't get mokx list integrity: Couldn't get size: 0x80000000 So we avoid reading these UEFI variables and thus prevent the crash.Show less

In the Linux kernel, the following vulnerability has been resolved: SUNRPC: Trap RDMA segment overflows Prevent svc_rdma_build_writes() from walking off the end of a Write chunk's segment array. Caught with KASAN. The test that this fix replaces is invalid, and might have been left over from an earlier prototype of the PCL work.Show less

In the Linux kernel, the following vulnerability has been resolved: ata: pata_octeon_cf: Fix refcount leak in octeon_cf_probe of_find_device_by_node() takes reference, we should use put_device() to release it when not need anymore. Add missing put_device() to avoid refcount leak.Show less

In the Linux kernel, the following vulnerability has been resolved: powerpc/papr_scm: don't requests stats with '0' sized stats buffer Sachin reported [1] that on a POWER-10 lpar he is seeing a kernel panic being reported with vPMEM when papr_scm probe is being called. The panic is of the form below and is observed only with following option disabled(profile) for the said LPAR 'Enable Performance Information Collection' in the HMC: Kernel attempted to write user page (1c) - exploit attempt? (uid: 0) BUG: Kernel NULL pointer dereference on write at 0x0000001c Faulting instruction address: 0xc008000001b90844 Oops: Kernel access of bad area, sig: 11 [#1] <snip> NIP [c008000001b90844] drc_pmem_query_stats+0x5c/0x270 [papr_scm] LR [c008000001b92794] papr_scm_probe+0x2ac/0x6ec [papr_scm] Call Trace: 0xc00000000941bca0 (unreliable) papr_scm_probe+0x2ac/0x6ec [papr_scm] platform_probe+0x98/0x150 really_probe+0xfc/0x510 __driver_probe_device+0x17c/0x230 <snip> ---[ end trace 0000000000000000 ]--- Kernel panic - not syncing: Fatal exception On investigation looks like this panic was caused due to a 'stat_buffer' of size==0 being provided to drc_pmem_query_stats() to fetch all performance stats-ids of an NVDIMM. However drc_pmem_query_stats() shouldn't have been called since the vPMEM NVDIMM doesn't support and performance stat-id's. This was caused due to missing check for 'p->stat_buffer_len' at the beginning of papr_scm_pmu_check_events() which indicates that the NVDIMM doesn't support performance-stats. Fix this by introducing the check for 'p->stat_buffer_len' at the beginning of papr_scm_pmu_check_events(). [1] https://lore.kernel.org/all/6B3A522A-6A5F-4CC9-B268-0C63AA6E07D3@linux.ibm.comShow less

In the Linux kernel, the following vulnerability has been resolved: ext4: fix warning in ext4_handle_inode_extension We got issue as follows: EXT4-fs error (device loop0) in ext4_reserve_inode_write:5741: Out of memory EXT4-fs error (device loop0): ext4_setattr:5462: inode #13: comm syz-executor.0: mark_inode_dirty error EXT4-fs error (device loop0) in ext4_setattr:5519: Out of memory EXT4-fs error (device loop0): ext4_ind_map_blocks:595: inode #13: comm syz-executor.0: Can't allocate blocks for non-extent mapped inodes with bigalloc ------------[ cut here ]------------ WARNING: CPU: 1 PID: 4361 at fs/ext4/file.c:301 ext4_file_write_iter+0x11c9/0x1220 Modules linked in: CPU: 1 PID: 4361 Comm: syz-executor.0 Not tainted 5.10.0+ #1 RIP: 0010:ext4_file_write_iter+0x11c9/0x1220 RSP: 0018:ffff924d80b27c00 EFLAGS: 00010282 RAX: ffffffff815a3379 RBX: 0000000000000000 RCX: 000000003b000000 RDX: ffff924d81601000 RSI: 00000000000009cc RDI: 00000000000009cd RBP: 000000000000000d R08: ffffffffbc5a2c6b R09: 0000902e0e52a96f R10: ffff902e2b7c1b40 R11: ffff902e2b7c1b40 R12: 000000000000000a R13: 0000000000000001 R14: ffff902e0e52aa10 R15: ffffffffffffff8b FS: 00007f81a7f65700(0000) GS:ffff902e3bc80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffff600400 CR3: 000000012db88001 CR4: 00000000003706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: do_iter_readv_writev+0x2e5/0x360 do_iter_write+0x112/0x4c0 do_pwritev+0x1e5/0x390 __x64_sys_pwritev2+0x7e/0xa0 do_syscall_64+0x37/0x50 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Above issue may happen as follows: Assume inode.i_size=4096 EXT4_I(inode)->i_disksize=4096 step 1: set inode->i_isize = 8192 ext4_setattr if (attr->ia_size != inode->i_size) EXT4_I(inode)->i_disksize = attr->ia_size; rc = ext4_mark_inode_dirty ext4_reserve_inode_write ext4_get_inode_loc __ext4_get_inode_loc sb_getblk --> return -ENOMEM ... if (!error) ->will not update i_size i_size_write(inode, attr->ia_size); Now: inode.i_size=4096 EXT4_I(inode)->i_disksize=8192 step 2: Direct write 4096 bytes ext4_file_write_iter ext4_dio_write_iter iomap_dio_rw ->return error if (extend) ext4_handle_inode_extension WARN_ON_ONCE(i_size_read(inode) < EXT4_I(inode)->i_disksize); ->Then trigger warning. To solve above issue, if mark inode dirty failed in ext4_setattr just set 'EXT4_I(inode)->i_disksize' with old value.Show less

In the Linux kernel, the following vulnerability has been resolved: net: altera: Fix refcount leak in altera_tse_mdio_create Every iteration of for_each_child_of_node() decrements the reference count of the previous node. When break from a for_each_child_of_node() loop, we need to explicitly call of_node_put() on the child node when not need anymore. Add missing of_node_put() to avoid refcount leak.Show less

In the Linux kernel, the following vulnerability has been resolved: net: mdio: unexport __init-annotated mdio_bus_init() EXPORT_SYMBOL and __init is a bad combination because the .init.text section is freed up after the initialization. Hence, modules cannot use symbols annotated __init. The access to a freed symbol may end up with kernel panic. modpost used to detect it, but it has been broken for a decade. Recently, I fixed modpost so it started to warn it again, then this showed up in linux-next builds. There are two ways to fix it: - Remove __init - Remove EXPORT_SYMBOL I chose the latter for this case because the only in-tree call-site, drivers/net/phy/phy_device.c is never compiled as modular. (CONFIG_PHYLIB is boolean)Show less

In the Linux kernel, the following vulnerability has been resolved: ext4: fix use-after-free in ext4_rename_dir_prepare We got issue as follows: EXT4-fs (loop0): mounted filesystem without journal. Opts: ,errors=continue ext4_get_first_dir_block: bh->b_data=0xffff88810bee6000 len=34478 ext4_get_first_dir_block: *parent_de=0xffff88810beee6ae bh->b_data=0xffff88810bee6000 ext4_rename_dir_prepare: [1] parent_de=0xffff88810beee6ae ================================================================== BUG: KASAN: use-after-free in ext4_rename_dir_prepare+0x152/0x220 Read of size 4 at addr ffff88810beee6ae by task rep/1895 CPU: 13 PID: 1895 Comm: rep Not tainted 5.10.0+ #241 Call Trace: dump_stack+0xbe/0xf9 print_address_description.constprop.0+0x1e/0x220 kasan_report.cold+0x37/0x7f ext4_rename_dir_prepare+0x152/0x220 ext4_rename+0xf44/0x1ad0 ext4_rename2+0x11c/0x170 vfs_rename+0xa84/0x1440 do_renameat2+0x683/0x8f0 __x64_sys_renameat+0x53/0x60 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f45a6fc41c9 RSP: 002b:00007ffc5a470218 EFLAGS: 00000246 ORIG_RAX: 0000000000000108 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f45a6fc41c9 RDX: 0000000000000005 RSI: 0000000020000180 RDI: 0000000000000005 RBP: 00007ffc5a470240 R08: 00007ffc5a470160 R09: 0000000020000080 R10: 00000000200001c0 R11: 0000000000000246 R12: 0000000000400bb0 R13: 00007ffc5a470320 R14: 0000000000000000 R15: 0000000000000000 The buggy address belongs to the page: page:00000000440015ce refcount:0 mapcount:0 mapping:0000000000000000 index:0x1 pfn:0x10beee flags: 0x200000000000000() raw: 0200000000000000 ffffea00043ff4c8 ffffea0004325608 0000000000000000 raw: 0000000000000001 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff88810beee580: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff88810beee600: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff >ffff88810beee680: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ^ ffff88810beee700: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff88810beee780: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ================================================================== Disabling lock debugging due to kernel taint ext4_rename_dir_prepare: [2] parent_de->inode=3537895424 ext4_rename_dir_prepare: [3] dir=0xffff888124170140 ext4_rename_dir_prepare: [4] ino=2 ext4_rename_dir_prepare: ent->dir->i_ino=2 parent=-757071872 Reason is first directory entry which 'rec_len' is 34478, then will get illegal parent entry. Now, we do not check directory entry after read directory block in 'ext4_get_first_dir_block'. To solve this issue, check directory entry in 'ext4_get_first_dir_block'. [ Trigger an ext4_error() instead of just warning if the directory is missing a '.' or '..' entry. Also make sure we return an error code if the file system is corrupted. -TYT ]Show less

In the Linux kernel, the following vulnerability has been resolved: ext4: filter out EXT4_FC_REPLAY from on-disk superblock field s_state The EXT4_FC_REPLAY bit in sbi->s_mount_state is used to indicate that we are in the middle of replay the fast commit journal. This was actually a mistake, since the sbi->s_mount_info is initialized from es->s_state. Arguably s_mount_state is misleadingly named, but the name is historical --- s_mount_state and s_state dates back to ext2. What should have been used is the ext4_{set,clear,test}_mount_flag() inline functions, which sets EXT4_MF_* bits in sbi->s_mount_flags. The problem with using EXT4_FC_REPLAY is that a maliciously corrupted superblock could result in EXT4_FC_REPLAY getting set in s_mount_state. This bypasses some sanity checks, and this can trigger a BUG() in ext4_es_cache_extent(). As a easy-to-backport-fix, filter out the EXT4_FC_REPLAY bit for now. We should eventually transition away from EXT4_FC_REPLAY to something like EXT4_MF_REPLAY.Show less

In the Linux kernel, the following vulnerability has been resolved: ext4: fix bug_on in ext4_writepages we got issue as follows: EXT4-fs error (device loop0): ext4_mb_generate_buddy:1141: group 0, block bitmap and bg descriptor inconsistent: 25 vs 31513 free cls ------------[ cut here ]------------ kernel BUG at fs/ext4/inode.c:2708! invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 2 PID: 2147 Comm: rep Not tainted 5.18.0-rc2-next-20220413+ #155 RIP: 0010:ext4_writepages+0x1977/0x1c10 RSP: 0018:ffff88811d3e7880 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000001 RCX: ffff88811c098000 RDX: 0000000000000000 RSI: ffff88811c098000 RDI: 0000000000000002 RBP: ffff888128140f50 R08: ffffffffb1ff6387 R09: 0000000000000000 R10: 0000000000000007 R11: ffffed10250281ea R12: 0000000000000001 R13: 00000000000000a4 R14: ffff88811d3e7bb8 R15: ffff888128141028 FS: 00007f443aed9740(0000) GS:ffff8883aef00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020007200 CR3: 000000011c2a4000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> do_writepages+0x130/0x3a0 filemap_fdatawrite_wbc+0x83/0xa0 filemap_flush+0xab/0xe0 ext4_alloc_da_blocks+0x51/0x120 __ext4_ioctl+0x1534/0x3210 __x64_sys_ioctl+0x12c/0x170 do_syscall_64+0x3b/0x90 It may happen as follows: 1. write inline_data inode vfs_write new_sync_write ext4_file_write_iter ext4_buffered_write_iter generic_perform_write ext4_da_write_begin ext4_da_write_inline_data_begin -> If inline data size too small will allocate block to write, then mapping will has dirty page ext4_da_convert_inline_data_to_extent ->clear EXT4_STATE_MAY_INLINE_DATA 2. fallocate do_vfs_ioctl ioctl_preallocate vfs_fallocate ext4_fallocate ext4_convert_inline_data ext4_convert_inline_data_nolock ext4_map_blocks -> fail will goto restore data ext4_restore_inline_data ext4_create_inline_data ext4_write_inline_data ext4_set_inode_state -> set inode EXT4_STATE_MAY_INLINE_DATA 3. writepages __ext4_ioctl ext4_alloc_da_blocks filemap_flush filemap_fdatawrite_wbc do_writepages ext4_writepages if (ext4_has_inline_data(inode)) BUG_ON(ext4_test_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA)) The root cause of this issue is we destory inline data until call ext4_writepages under delay allocation mode. But there maybe already convert from inline to extent. To solve this issue, we call filemap_flush first..Show less

In the Linux kernel, the following vulnerability has been resolved: net: dsa: lantiq_gswip: Fix refcount leak in gswip_gphy_fw_list Every iteration of for_each_available_child_of_node() decrements the reference count of the previous node. when breaking early from a for_each_available_child_of_node() loop, we need to explicitly call of_node_put() on the gphy_fw_np. Add missing of_node_put() to avoid refcount leak.Show less

In the Linux kernel, the following vulnerability has been resolved: net: xfrm: unexport __init-annotated xfrm4_protocol_init() EXPORT_SYMBOL and __init is a bad combination because the .init.text section is freed up after the initialization. Hence, modules cannot use symbols annotated __init. The access to a freed symbol may end up with kernel panic. modpost used to detect it, but it has been broken for a decade. Recently, I fixed modpost so it started to warn it again, then this showed up in linux-next builds. There are two ways to fix it: - Remove __init - Remove EXPORT_SYMBOL I chose the latter for this case because the only in-tree call-site, net/ipv4/xfrm4_policy.c is never compiled as modular. (CONFIG_XFRM is boolean)Show less

In the Linux kernel, the following vulnerability has been resolved: af_unix: Fix a data-race in unix_dgram_peer_wake_me(). unix_dgram_poll() calls unix_dgram_peer_wake_me() without `other`'s lock held and check if its receive queue is full. Here we need to use unix_recvq_full_lockless() instead of unix_recvq_full(), otherwise KCSAN will report a data-race.Show less

In the Linux kernel, the following vulnerability has been resolved: ext4: avoid cycles in directory h-tree A maliciously corrupted filesystem can contain cycles in the h-tree stored inside a directory. That can easily lead to the kernel corrupting tree nodes that were already verified under its hands while doing a node split and consequently accessing unallocated memory. Fix the problem by verifying traversed block numbers are unique.Show less

In the Linux kernel, the following vulnerability has been resolved: net: ethernet: bgmac: Fix refcount leak in bcma_mdio_mii_register of_get_child_by_name() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Add missing of_node_put() to avoid refcount leak.Show less

In the Linux kernel, the following vulnerability has been resolved: bpf, arm64: Clear prog->jited_len along prog->jited syzbot reported an illegal copy_to_user() attempt from bpf_prog_get_info_by_fd() [1] There was no repro yet on this bug, but I think that commit 0aef499f3172 ("mm/usercopy: Detect vmalloc overruns") is exposing a prior bug in bpf arm64. bpf_prog_get_info_by_fd() looks at prog->jited_len to determine if the JIT image can be copied out to user space. My theory is that syzbot managed to get a prog where prog->jited_len has been set to 43, while prog->bpf_func has ben cleared. It is not clear why copy_to_user(uinsns, NULL, ulen) is triggering this particular warning. I thought find_vma_area(NULL) would not find a vm_struct. As we do not hold vmap_area_lock spinlock, it might be possible that the found vm_struct was garbage. [1] usercopy: Kernel memory exposure attempt detected from vmalloc (offset 792633534417210172, size 43)! kernel BUG at mm/usercopy.c:101! Internal error: Oops - BUG: 0 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 25002 Comm: syz-executor.1 Not tainted 5.18.0-syzkaller-10139-g8291eaafed36 #0 Hardware name: linux,dummy-virt (DT) pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : usercopy_abort+0x90/0x94 mm/usercopy.c:101 lr : usercopy_abort+0x90/0x94 mm/usercopy.c:89 sp : ffff80000b773a20 x29: ffff80000b773a30 x28: faff80000b745000 x27: ffff80000b773b48 x26: 0000000000000000 x25: 000000000000002b x24: 0000000000000000 x23: 00000000000000e0 x22: ffff80000b75db67 x21: 0000000000000001 x20: 000000000000002b x19: ffff80000b75db3c x18: 00000000fffffffd x17: 2820636f6c6c616d x16: 76206d6f72662064 x15: 6574636574656420 x14: 74706d6574746120 x13: 2129333420657a69 x12: 73202c3237313031 x11: 3237313434333533 x10: 3336323937207465 x9 : 657275736f707865 x8 : ffff80000a30c550 x7 : ffff80000b773830 x6 : ffff80000b773830 x5 : 0000000000000000 x4 : ffff00007fbbaa10 x3 : 0000000000000000 x2 : 0000000000000000 x1 : f7ff000028fc0000 x0 : 0000000000000064 Call trace: usercopy_abort+0x90/0x94 mm/usercopy.c:89 check_heap_object mm/usercopy.c:186 [inline] __check_object_size mm/usercopy.c:252 [inline] __check_object_size+0x198/0x36c mm/usercopy.c:214 check_object_size include/linux/thread_info.h:199 [inline] check_copy_size include/linux/thread_info.h:235 [inline] copy_to_user include/linux/uaccess.h:159 [inline] bpf_prog_get_info_by_fd.isra.0+0xf14/0xfdc kernel/bpf/syscall.c:3993 bpf_obj_get_info_by_fd+0x12c/0x510 kernel/bpf/syscall.c:4253 __sys_bpf+0x900/0x2150 kernel/bpf/syscall.c:4956 __do_sys_bpf kernel/bpf/syscall.c:5021 [inline] __se_sys_bpf kernel/bpf/syscall.c:5019 [inline] __arm64_sys_bpf+0x28/0x40 kernel/bpf/syscall.c:5019 __invoke_syscall arch/arm64/kernel/syscall.c:38 [inline] invoke_syscall+0x48/0x114 arch/arm64/kernel/syscall.c:52 el0_svc_common.constprop.0+0x44/0xec arch/arm64/kernel/syscall.c:142 do_el0_svc+0xa0/0xc0 arch/arm64/kernel/syscall.c:206 el0_svc+0x44/0xb0 arch/arm64/kernel/entry-common.c:624 el0t_64_sync_handler+0x1ac/0x1b0 arch/arm64/kernel/entry-common.c:642 el0t_64_sync+0x198/0x19c arch/arm64/kernel/entry.S:581 Code: aa0003e3 d00038c0 91248000 97fff65f (d4210000)Show less