Linux Kernel

In the Linux kernel, the following vulnerability has been resolved: can: af_can: fix NULL pointer dereference in can_rx_register() It causes NULL pointer dereference when testing as following: (a) use syscall(__NR_socket, 0x10ul, 3ul, 0) to create netlink socket. (b) use syscall(__NR_sendmsg, ...) to create bond link device and vxcan link device, and bind vxcan device to bond device (can also use ifenslave command to bind vxcan device to bond device). (c) use syscall(__NR_socket, 0x1dul, 3ul, 1) to create CAN socket. (d) use syscall(__NR_bind, ...) to bind the bond device to CAN socket. The bond device invokes the can-raw protocol registration interface to receive CAN packets. However, ml_priv is not allocated to the dev, dev_rcv_lists is assigned to NULL in can_rx_register(). In this case, it will occur the NULL pointer dereference issue. The following is the stack information: BUG: kernel NULL pointer dereference, address: 0000000000000008 PGD 122a4067 P4D 122a4067 PUD 1223c067 PMD 0 Oops: 0000 [#1] PREEMPT SMP RIP: 0010:can_rx_register+0x12d/0x1e0 Call Trace: <TASK> raw_enable_filters+0x8d/0x120 raw_enable_allfilters+0x3b/0x130 raw_bind+0x118/0x4f0 __sys_bind+0x163/0x1a0 __x64_sys_bind+0x1e/0x30 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x63/0xcd </TASK>Show less

In the Linux kernel, the following vulnerability has been resolved: tipc: fix the msg->req tlv len check in tipc_nl_compat_name_table_dump_header This is a follow-up for commit 974cb0e3e7c9 ("tipc: fix uninit-value in tipc_nl_compat_name_table_dump") where it should have type casted sizeof(..) to int to work when TLV_GET_DATA_LEN() returns a negative value. syzbot reported a call trace because of it: BUG: KMSAN: uninit-value in ... tipc_nl_compat_name_table_dump+0x841/0xea0 net/tipc/netlink_compat.c:934 __tipc_nl_compat_dumpit+0xab2/0x1320 net/tipc/netlink_compat.c:238 tipc_nl_compat_dumpit+0x991/0xb50 net/tipc/netlink_compat.c:321 tipc_nl_compat_recv+0xb6e/0x1640 net/tipc/netlink_compat.c:1324 genl_family_rcv_msg_doit net/netlink/genetlink.c:731 [inline] genl_family_rcv_msg net/netlink/genetlink.c:775 [inline] genl_rcv_msg+0x103f/0x1260 net/netlink/genetlink.c:792 netlink_rcv_skb+0x3a5/0x6c0 net/netlink/af_netlink.c:2501 genl_rcv+0x3c/0x50 net/netlink/genetlink.c:803 netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline] netlink_unicast+0xf3b/0x1270 net/netlink/af_netlink.c:1345 netlink_sendmsg+0x1288/0x1440 net/netlink/af_netlink.c:1921 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg net/socket.c:734 [inline]Show less

In the Linux kernel, the following vulnerability has been resolved: dmaengine: mv_xor_v2: Fix a resource leak in mv_xor_v2_remove() A clk_prepare_enable() call in the probe is not balanced by a corresponding clk_disable_unprepare() in the remove function. Add the missing call.Show less

In the Linux kernel, the following vulnerability has been resolved: dmaengine: ti: k3-udma-glue: fix memory leak when register device fail If device_register() fails, it should call put_device() to give up reference, the name allocated in dev_set_name() can be freed in callback function kobject_cleanup().Show less

In the Linux kernel, the following vulnerability has been resolved: net: lapbether: fix issue of invalid opcode in lapbeth_open() If lapb_register() failed when lapb device goes to up for the first time, the NAPI is not disabled. As a result, the invalid opcode issue is reported when the lapb device goes to up for the second time. The stack info is as follows: [ 1958.311422][T11356] kernel BUG at net/core/dev.c:6442! [ 1958.312206][T11356] invalid opcode: 0000 [#1] PREEMPT SMP KASAN [ 1958.315979][T11356] RIP: 0010:napi_enable+0x16a/0x1f0 [ 1958.332310][T11356] Call Trace: [ 1958.332817][T11356] <TASK> [ 1958.336135][T11356] lapbeth_open+0x18/0x90 [ 1958.337446][T11356] __dev_open+0x258/0x490 [ 1958.341672][T11356] __dev_change_flags+0x4d4/0x6a0 [ 1958.345325][T11356] dev_change_flags+0x93/0x160 [ 1958.346027][T11356] devinet_ioctl+0x1276/0x1bf0 [ 1958.346738][T11356] inet_ioctl+0x1c8/0x2d0 [ 1958.349638][T11356] sock_ioctl+0x5d1/0x750 [ 1958.356059][T11356] __x64_sys_ioctl+0x3ec/0x1790 [ 1958.365594][T11356] do_syscall_64+0x35/0x80 [ 1958.366239][T11356] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 1958.377381][T11356] </TASK>Show less

In the Linux kernel, the following vulnerability has been resolved: octeontx2-pf: Fix SQE threshold checking Current way of checking available SQE count which is based on HW updated SQB count could result in driver submitting an SQE even before CQE for the previously transmitted SQE at the same index is processed in NAPI resulting losing SKB pointers, hence a leak. Fix this by checking a consumer index which is updated once CQE is processed.Show less

In the Linux kernel, the following vulnerability has been resolved: net: marvell: prestera: fix memory leak in prestera_rxtx_switch_init() When prestera_sdma_switch_init() failed, the memory pointed to by sw->rxtx isn't released. Fix it. Only be compiled, not be tested.Show less

In the Linux kernel, the following vulnerability has been resolved: net: wwan: iosm: fix memory leak in ipc_pcie_read_bios_cfg ipc_pcie_read_bios_cfg() is using the acpi_evaluate_dsm() to obtain the wwan power state configuration from BIOS but is not freeing the acpi_object. The acpi_evaluate_dsm() returned acpi_object to be freed. Free the acpi_object after use.Show less

In the Linux kernel, the following vulnerability has been resolved: mctp: Fix an error handling path in mctp_init() If mctp_neigh_init() return error, the routes resources should be released in the error handling path. Otherwise some resources leak.Show less

In the Linux kernel, the following vulnerability has been resolved: net: macvlan: fix memory leaks of macvlan_common_newlink kmemleak reports memory leaks in macvlan_common_newlink, as follows: ip link add link eth0 name .. type macvlan mode source macaddr add <MAC-ADDR> kmemleak reports: unreferenced object 0xffff8880109bb140 (size 64): comm "ip", pid 284, jiffies 4294986150 (age 430.108s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 b8 aa 5a 12 80 88 ff ff ..........Z..... 80 1b fa 0d 80 88 ff ff 1e ff ac af c7 c1 6b 6b ..............kk backtrace: [<ffffffff813e06a7>] kmem_cache_alloc_trace+0x1c7/0x300 [<ffffffff81b66025>] macvlan_hash_add_source+0x45/0xc0 [<ffffffff81b66a67>] macvlan_changelink_sources+0xd7/0x170 [<ffffffff81b6775c>] macvlan_common_newlink+0x38c/0x5a0 [<ffffffff81b6797e>] macvlan_newlink+0xe/0x20 [<ffffffff81d97f8f>] __rtnl_newlink+0x7af/0xa50 [<ffffffff81d98278>] rtnl_newlink+0x48/0x70 ... In the scenario where the macvlan mode is configured as 'source', macvlan_changelink_sources() will be execured to reconfigure list of remote source mac addresses, at the same time, if register_netdevice() return an error, the resource generated by macvlan_changelink_sources() is not cleaned up. Using this patch, in the case of an error, it will execute macvlan_flush_sources() to ensure that the resource is cleaned up.Show less

In the Linux kernel, the following vulnerability has been resolved: riscv: process: fix kernel info leakage thread_struct's s[12] may contain random kernel memory content, which may be finally leaked to userspace. This is a security hole. Fix it by clearing the s[12] array in thread_struct when fork. As for kthread case, it's better to clear the s[12] array as well.Show less

In the Linux kernel, the following vulnerability has been resolved: riscv: fix reserved memory setup Currently, RISC-V sets up reserved memory using the "early" copy of the device tree. As a result, when trying to get a reserved memory region using of_reserved_mem_lookup(), the pointer to reserved memory regions is using the early, pre-virtual-memory address which causes a kernel panic when trying to use the buffer's name: Unable to handle kernel paging request at virtual address 00000000401c31ac Oops [#1] Modules linked in: CPU: 0 PID: 0 Comm: swapper Not tainted 6.0.0-rc1-00001-g0d9d6953d834 #1 Hardware name: Microchip PolarFire-SoC Icicle Kit (DT) epc : string+0x4a/0xea ra : vsnprintf+0x1e4/0x336 epc : ffffffff80335ea0 ra : ffffffff80338936 sp : ffffffff81203be0 gp : ffffffff812e0a98 tp : ffffffff8120de40 t0 : 0000000000000000 t1 : ffffffff81203e28 t2 : 7265736572203a46 s0 : ffffffff81203c20 s1 : ffffffff81203e28 a0 : ffffffff81203d22 a1 : 0000000000000000 a2 : ffffffff81203d08 a3 : 0000000081203d21 a4 : ffffffffffffffff a5 : 00000000401c31ac a6 : ffff0a00ffffff04 a7 : ffffffffffffffff s2 : ffffffff81203d08 s3 : ffffffff81203d00 s4 : 0000000000000008 s5 : ffffffff000000ff s6 : 0000000000ffffff s7 : 00000000ffffff00 s8 : ffffffff80d9821a s9 : ffffffff81203d22 s10: 0000000000000002 s11: ffffffff80d9821c t3 : ffffffff812f3617 t4 : ffffffff812f3617 t5 : ffffffff812f3618 t6 : ffffffff81203d08 status: 0000000200000100 badaddr: 00000000401c31ac cause: 000000000000000d [<ffffffff80338936>] vsnprintf+0x1e4/0x336 [<ffffffff80055ae2>] vprintk_store+0xf6/0x344 [<ffffffff80055d86>] vprintk_emit+0x56/0x192 [<ffffffff80055ed8>] vprintk_default+0x16/0x1e [<ffffffff800563d2>] vprintk+0x72/0x80 [<ffffffff806813b2>] _printk+0x36/0x50 [<ffffffff8068af48>] print_reserved_mem+0x1c/0x24 [<ffffffff808057ec>] paging_init+0x528/0x5bc [<ffffffff808031ae>] setup_arch+0xd0/0x592 [<ffffffff8080070e>] start_kernel+0x82/0x73c early_init_fdt_scan_reserved_mem() takes no arguments as it operates on initial_boot_params, which is populated by early_init_dt_verify(). On RISC-V, early_init_dt_verify() is called twice. Once, directly, in setup_arch() if CONFIG_BUILTIN_DTB is not enabled and once indirectly, very early in the boot process, by parse_dtb() when it calls early_init_dt_scan_nodes(). This first call uses dtb_early_va to set initial_boot_params, which is not usable later in the boot process when early_init_fdt_scan_reserved_mem() is called. On arm64 for example, the corresponding call to early_init_dt_scan_nodes() uses fixmap addresses and doesn't suffer the same fate. Move early_init_fdt_scan_reserved_mem() further along the boot sequence, after the direct call to early_init_dt_verify() in setup_arch() so that the names use the correct virtual memory addresses. The above supposed that CONFIG_BUILTIN_DTB was not set, but should work equally in the case where it is - unflatted_and_copy_device_tree() also updates initial_boot_params.Show less

In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix deadlock in nilfs_count_free_blocks() A semaphore deadlock can occur if nilfs_get_block() detects metadata corruption while locating data blocks and a superblock writeback occurs at the same time: task 1 task 2 ------ ------ * A file operation * nilfs_truncate() nilfs_get_block() down_read(rwsem A) <-- nilfs_bmap_lookup_contig() ... generic_shutdown_super() nilfs_put_super() * Prepare to write superblock * down_write(rwsem B) <-- nilfs_cleanup_super() * Detect b-tree corruption * nilfs_set_log_cursor() nilfs_bmap_convert_error() nilfs_count_free_blocks() __nilfs_error() down_read(rwsem A) <-- nilfs_set_error() down_write(rwsem B) <-- *** DEADLOCK *** Here, nilfs_get_block() readlocks rwsem A (= NILFS_MDT(dat_inode)->mi_sem) and then calls nilfs_bmap_lookup_contig(), but if it fails due to metadata corruption, __nilfs_error() is called from nilfs_bmap_convert_error() inside the lock section. Since __nilfs_error() calls nilfs_set_error() unless the filesystem is read-only and nilfs_set_error() attempts to writelock rwsem B (= nilfs->ns_sem) to write back superblock exclusively, hierarchical lock acquisition occurs in the order rwsem A -> rwsem B. Now, if another task starts updating the superblock, it may writelock rwsem B during the lock sequence above, and can deadlock trying to readlock rwsem A in nilfs_count_free_blocks(). However, there is actually no need to take rwsem A in nilfs_count_free_blocks() because it, within the lock section, only reads a single integer data on a shared struct with nilfs_sufile_get_ncleansegs(). This has been the case after commit aa474a220180 ("nilfs2: add local variable to cache the number of clean segments"), that is, even before this bug was introduced. So, this resolves the deadlock problem by just not taking the semaphore in nilfs_count_free_blocks().Show less

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix match incorrectly in dev_args_match_device syzkaller found a failed assertion: assertion failed: (args->devid != (u64)-1) || args->missing, in fs/btrfs/volumes.c:6921 This can be triggered when we set devid to (u64)-1 by ioctl. In this case, the match of devid will be skipped and the match of device may succeed incorrectly. Patch 562d7b1512f7 introduced this function which is used to match device. This function contains two matching scenarios, we can distinguish them by checking the value of args->missing rather than check whether args->devid and args->uuid is default value.Show less

In the Linux kernel, the following vulnerability has been resolved: phy: qcom-qmp-combo: fix NULL-deref on runtime resume Commit fc64623637da ("phy: qcom-qmp-combo,usb: add support for separate PCS_USB region") started treating the PCS_USB registers as potentially separate from the PCS registers but used the wrong base when no PCS_USB offset has been provided. Fix the PCS_USB base used at runtime resume to prevent dereferencing a NULL pointer on platforms that do not provide a PCS_USB offset (e.g. SC7180).Show less

In the Linux kernel, the following vulnerability has been resolved: net: ethernet: ti: am65-cpsw: Fix segmentation fault at module unload Move am65_cpsw_nuss_phylink_cleanup() call to after am65_cpsw_nuss_cleanup_ndev() so phylink is still valid to prevent the below Segmentation fault on module remove when first slave link is up. [ 31.652944] Unable to handle kernel paging request at virtual address 00040008000005f4 [ 31.684627] Mem abort info: [ 31.687446] ESR = 0x0000000096000004 [ 31.704614] EC = 0x25: DABT (current EL), IL = 32 bits [ 31.720663] SET = 0, FnV = 0 [ 31.723729] EA = 0, S1PTW = 0 [ 31.740617] FSC = 0x04: level 0 translation fault [ 31.756624] Data abort info: [ 31.759508] ISV = 0, ISS = 0x00000004 [ 31.776705] CM = 0, WnR = 0 [ 31.779695] [00040008000005f4] address between user and kernel address ranges [ 31.808644] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP [ 31.814928] Modules linked in: wlcore_sdio wl18xx wlcore mac80211 libarc4 cfg80211 rfkill crct10dif_ce phy_gmii_sel ti_am65_cpsw_nuss(-) sch_fq_codel ipv6 [ 31.828776] CPU: 0 PID: 1026 Comm: modprobe Not tainted 6.1.0-rc2-00012-gfabfcf7dafdb-dirty #160 [ 31.837547] Hardware name: Texas Instruments AM625 (DT) [ 31.842760] pstate: 40000005 (nZcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 31.849709] pc : phy_stop+0x18/0xf8 [ 31.853202] lr : phylink_stop+0x38/0xf8 [ 31.857031] sp : ffff80000a0839f0 [ 31.860335] x29: ffff80000a0839f0 x28: ffff000000de1c80 x27: 0000000000000000 [ 31.867462] x26: 0000000000000000 x25: 0000000000000000 x24: ffff80000a083b98 [ 31.874589] x23: 0000000000000800 x22: 0000000000000001 x21: ffff000001bfba90 [ 31.881715] x20: ffff0000015ee000 x19: 0004000800000200 x18: 0000000000000000 [ 31.888842] x17: ffff800076c45000 x16: ffff800008004000 x15: 000058e39660b106 [ 31.895969] x14: 0000000000000144 x13: 0000000000000144 x12: 0000000000000000 [ 31.903095] x11: 000000000000275f x10: 00000000000009e0 x9 : ffff80000a0837d0 [ 31.910222] x8 : ffff000000de26c0 x7 : ffff00007fbd6540 x6 : ffff00007fbd64c0 [ 31.917349] x5 : ffff00007fbd0b10 x4 : ffff00007fbd0b10 x3 : ffff00007fbd3920 [ 31.924476] x2 : d0a07fcff8b8d500 x1 : 0000000000000000 x0 : 0004000800000200 [ 31.931603] Call trace: [ 31.934042] phy_stop+0x18/0xf8 [ 31.937177] phylink_stop+0x38/0xf8 [ 31.940657] am65_cpsw_nuss_ndo_slave_stop+0x28/0x1e0 [ti_am65_cpsw_nuss] [ 31.947452] __dev_close_many+0xa4/0x140 [ 31.951371] dev_close_many+0x84/0x128 [ 31.955115] unregister_netdevice_many+0x130/0x6d0 [ 31.959897] unregister_netdevice_queue+0x94/0xd8 [ 31.964591] unregister_netdev+0x24/0x38 [ 31.968504] am65_cpsw_nuss_cleanup_ndev.isra.0+0x48/0x70 [ti_am65_cpsw_nuss] [ 31.975637] am65_cpsw_nuss_remove+0x58/0xf8 [ti_am65_cpsw_nuss]Show less

In the Linux kernel, the following vulnerability has been resolved: udf: Fix a slab-out-of-bounds write bug in udf_find_entry() Syzbot reported a slab-out-of-bounds Write bug: loop0: detected capacity change from 0 to 2048 ================================================================== BUG: KASAN: slab-out-of-bounds in udf_find_entry+0x8a5/0x14f0 fs/udf/namei.c:253 Write of size 105 at addr ffff8880123ff896 by task syz-executor323/3610 CPU: 0 PID: 3610 Comm: syz-executor323 Not tainted 6.1.0-rc2-syzkaller-00105-gb229b6ca5abb #0 Hardware name: Google Compute Engine/Google Compute Engine, BIOS Google 10/11/2022 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x1b1/0x28e lib/dump_stack.c:106 print_address_description+0x74/0x340 mm/kasan/report.c:284 print_report+0x107/0x1f0 mm/kasan/report.c:395 kasan_report+0xcd/0x100 mm/kasan/report.c:495 kasan_check_range+0x2a7/0x2e0 mm/kasan/generic.c:189 memcpy+0x3c/0x60 mm/kasan/shadow.c:66 udf_find_entry+0x8a5/0x14f0 fs/udf/namei.c:253 udf_lookup+0xef/0x340 fs/udf/namei.c:309 lookup_open fs/namei.c:3391 [inline] open_last_lookups fs/namei.c:3481 [inline] path_openat+0x10e6/0x2df0 fs/namei.c:3710 do_filp_open+0x264/0x4f0 fs/namei.c:3740 do_sys_openat2+0x124/0x4e0 fs/open.c:1310 do_sys_open fs/open.c:1326 [inline] __do_sys_creat fs/open.c:1402 [inline] __se_sys_creat fs/open.c:1396 [inline] __x64_sys_creat+0x11f/0x160 fs/open.c:1396 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7ffab0d164d9 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffe1a7e6bb8 EFLAGS: 00000246 ORIG_RAX: 0000000000000055 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007ffab0d164d9 RDX: 00007ffab0d164d9 RSI: 0000000000000000 RDI: 0000000020000180 RBP: 00007ffab0cd5a10 R08: 0000000000000000 R09: 0000000000000000 R10: 00005555573552c0 R11: 0000000000000246 R12: 00007ffab0cd5aa0 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 </TASK> Allocated by task 3610: kasan_save_stack mm/kasan/common.c:45 [inline] kasan_set_track+0x3d/0x60 mm/kasan/common.c:52 ____kasan_kmalloc mm/kasan/common.c:371 [inline] __kasan_kmalloc+0x97/0xb0 mm/kasan/common.c:380 kmalloc include/linux/slab.h:576 [inline] udf_find_entry+0x7b6/0x14f0 fs/udf/namei.c:243 udf_lookup+0xef/0x340 fs/udf/namei.c:309 lookup_open fs/namei.c:3391 [inline] open_last_lookups fs/namei.c:3481 [inline] path_openat+0x10e6/0x2df0 fs/namei.c:3710 do_filp_open+0x264/0x4f0 fs/namei.c:3740 do_sys_openat2+0x124/0x4e0 fs/open.c:1310 do_sys_open fs/open.c:1326 [inline] __do_sys_creat fs/open.c:1402 [inline] __se_sys_creat fs/open.c:1396 [inline] __x64_sys_creat+0x11f/0x160 fs/open.c:1396 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd The buggy address belongs to the object at ffff8880123ff800 which belongs to the cache kmalloc-256 of size 256 The buggy address is located 150 bytes inside of 256-byte region [ffff8880123ff800, ffff8880123ff900) The buggy address belongs to the physical page: page:ffffea000048ff80 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x123fe head:ffffea000048ff80 order:1 compound_mapcount:0 compound_pincount:0 flags: 0xfff00000010200(slab|head|node=0|zone=1|lastcpupid=0x7ff) raw: 00fff00000010200 ffffea00004b8500 dead000000000003 ffff888012041b40 raw: 0000000000000000 0000000080100010 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected page_owner tracks the page as allocated page last allocated via order 0, migratetype Unmovable, gfp_mask 0x0(), pid 1, tgid 1 (swapper/0), ts 1841222404, free_ts 0 create_dummy_stack mm/page_owner.c: ---truncated---Show less

In the Linux kernel, the following vulnerability has been resolved: can: j1939: j1939_send_one(): fix missing CAN header initialization The read access to struct canxl_frame::len inside of a j1939 created skbuff revealed a missing initialization of reserved and later filled elements in struct can_frame. This patch initializes the 8 byte CAN header with zero.Show less

In the Linux kernel, the following vulnerability has been resolved: can: dev: fix skb drop check In commit a6d190f8c767 ("can: skb: drop tx skb if in listen only mode") the priv->ctrlmode element is read even on virtual CAN interfaces that do not create the struct can_priv at startup. This out-of-bounds read may lead to CAN frame drops for virtual CAN interfaces like vcan and vxcan. This patch mainly reverts the original commit and adds a new helper for CAN interface drivers that provide the required information in struct can_priv. [mkl: patch pch_can, too]Show less

In the Linux kernel, the following vulnerability has been resolved: ASoC: core: Fix use-after-free in snd_soc_exit() KASAN reports a use-after-free: BUG: KASAN: use-after-free in device_del+0xb5b/0xc60 Read of size 8 at addr ffff888008655050 by task rmmod/387 CPU: 2 PID: 387 Comm: rmmod Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) Call Trace: <TASK> dump_stack_lvl+0x79/0x9a print_report+0x17f/0x47b kasan_report+0xbb/0xf0 device_del+0xb5b/0xc60 platform_device_del.part.0+0x24/0x200 platform_device_unregister+0x2e/0x40 snd_soc_exit+0xa/0x22 [snd_soc_core] __do_sys_delete_module.constprop.0+0x34f/0x5b0 do_syscall_64+0x3a/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd ... </TASK> It's bacause in snd_soc_init(), snd_soc_util_init() is possble to fail, but its ret is ignored, which makes soc_dummy_dev unregistered twice. snd_soc_init() snd_soc_util_init() platform_device_register_simple(soc_dummy_dev) platform_driver_register() # fail platform_device_unregister(soc_dummy_dev) platform_driver_register() # success ... snd_soc_exit() snd_soc_util_exit() # soc_dummy_dev will be unregistered for second time To fix it, handle error and stop snd_soc_init() when util_init() fail. Also clean debugfs when util_init() or driver_register() fail.Show less