Linux Kernel

In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Do IRR scan in __kvm_apic_update_irr even if PIR is empty Fall back to apic_find_highest_vector() when PID.ON is set but PIR turns out to be empty, to correctly report the highest pending interrupt from the existing IRR. In a nested VM stress test, the following WARNING fires in vmx_check_nested_events() when kvm_cpu_has_interrupt() reports a pending interrupt but the subsequent kvm_apic_has_interrupt() (which invokes vmx_sync_pir_to_irr() again) returns -1: WARNING: CPU: 99 PID: 57767 at arch/x86/kvm/vmx/nested.c:4449 vmx_check_nested_events+0x6bf/0x6e0 [kvm_intel] Call Trace: kvm_check_and_inject_events vcpu_enter_guest.constprop.0 vcpu_run kvm_arch_vcpu_ioctl_run kvm_vcpu_ioctl __x64_sys_ioctl do_syscall_64 entry_SYSCALL_64_after_hwframe The root cause is a race between vmx_sync_pir_to_irr() on the target vCPU and __vmx_deliver_posted_interrupt() on a sender vCPU. The sender performs two individually-atomic operations that are not a single transaction: 1. pi_test_and_set_pir(vector) -- sets the PIR bit 2. pi_test_and_set_on() -- sets PID.ON The following interleaving triggers the bug: Sender vCPU (IPI): Target vCPU (1st sync_pir_to_irr): B1: set PIR[vector] A1: pi_clear_on() A2: pi_harvest_pir() -> sees B1 bit A3: xchg() -> consumes bit, PIR=0 (1st sync returns correct max_irr) B2: set PID.ON = 1 Target vCPU (2nd sync_pir_to_irr): C1: pi_test_on() -> TRUE (from B2) C2: pi_clear_on() -> ON=0 C3: pi_harvest_pir() -> PIR empty C4: *max_irr = -1, early return IRR NOT SCANNED The interrupt is not lost (it resides in the IRR from the first sync and is recovered on the next vcpu_enter_guest() iteration), but the incorrect max_irr causes a spurious WARNING and a wasted L2 VM-Enter/VM-Exit cycle.Show less

In the Linux kernel, the following vulnerability has been resolved: dm: fix a buffer overflow in ioctl processing Tony Asleson (using Claude) found a buffer overflow in dm-ioctl in the function retrieve_status: 1. The code in retrieve_status checks that the output string fits into the output buffer and writes the output string there 2. Then, the code aligns the "outptr" variable to the next 8-byte boundary: outptr = align_ptr(outptr); 3. The alignment doesn't check overflow, so outptr could point past the buffer end 4. The "for" loop is iterated again, it executes: remaining = len - (outptr - outbuf); 5. If "outptr" points past "outbuf + len", the arithmetics wraps around and the variable "remaining" contains unusually high number 6. With "remaining" being high, the code writes more data past the end of the buffer Luckily, this bug has no security implications because: 1. Only root can issue device mapper ioctls 2. The commonly used libraries that communicate with device mapper (libdevmapper and devicemapper-rs) use buffer size that is aligned to 8 bytes - thus, "outptr = align_ptr(outptr)" can't overshoot the input buffer and the bug can't happen accidentallyShow less

In the Linux kernel, the following vulnerability has been resolved: clk: microchip: mpfs-ccc: fix out of bounds access during output registration UBSAN reported an out of bounds access during registration of the last two outputs. This out of bounds access occurs because space is only allocated in the hws array for two PLLs and the four output dividers that each has, but the defined IDs contain two DLLS and their two outputs each, which are not supported by the driver. The ID order is PLLs -> DLLs -> PLL outputs -> DLL outputs. Decrement the PLL output IDs by two while adding them to the array to avoid the problem.Show less

In the Linux kernel, the following vulnerability has been resolved: pmdomain: core: Fix detach procedure for virtual devices in genpd If a device is attached to a PM domain through genpd_dev_pm_attach_by_id(), genpd calls pm_runtime_enable() for the corresponding virtual device that it registers. While this avoids boilerplate code in drivers, there is no corresponding call to pm_runtime_disable() in genpd_dev_pm_detach(). This means these virtual devices are typically detached from its genpd, while runtime PM remains enabled for them, which is not how things are designed to work. In worst cases it may lead to critical errors, like a NULL pointer dereference bug in genpd_runtime_suspend(), which was recently reported. For another case, we may end up keeping an unnecessary vote for a performance state for the device. To fix these problems, let's add this missing call to pm_runtime_disable() in genpd_dev_pm_detach().Show less

In the Linux kernel, the following vulnerability has been resolved: crypto: caam - guard HMAC key hex dumps in hash_digest_key Use print_hex_dump_devel() for dumping sensitive HMAC key bytes in hash_digest_key() to avoid leaking secrets at runtime when CONFIG_DYNAMIC_DEBUG is enabled.Show less

In the Linux kernel, the following vulnerability has been resolved: x86/efi: Fix graceful fault handling after FPU softirq changes Since commit d02198550423 ("x86/fpu: Improve crypto performance by making kernel-mode FPU reliably usable in softirqs"), kernel_fpu_begin() calls fpregs_lock() which uses local_bh_disable() instead of the previous preempt_disable(). This sets SOFTIRQ_OFFSET in preempt_count during the entire EFI runtime service call, causing in_interrupt() to return true in normal task context. The graceful page fault handler efi_crash_gracefully_on_page_fault() uses in_interrupt() to bail out for faults in real interrupt context. With SOFTIRQ_OFFSET now set, the handler always bails out, leaving EFI firmware page faults unhandled. This escalates to die() which also sees in_interrupt() as true and calls panic("Fatal exception in interrupt"), resulting in a hard system freeze. On systems with buggy firmware that triggers page faults during EFI runtime calls (e.g., accessing unmapped memory in GetTime()), this causes an unrecoverable hang instead of the expected graceful EFI_ABORTED recovery. Fix by replacing in_interrupt() with !in_task(). This preserves the original intent of bailing for interrupts or NMI faults, while no longer falsely triggering from the FPU code path's local_bh_disable(). [ardb: Sashiko spotted that using 'in_hardirq() || in_nmi()' leaves a window where a softirq may be taken before fpregs_lock() is called, but after efi_rts_work.efi_rts_id has been assigned, and any page faults occurring in that window will then be misidentified as having been caused by the firmware. Instead, use !in_task(), which incorporates in_serving_softirq(). ]Show less

In the Linux kernel, the following vulnerability has been resolved: lib/scatterlist: fix length calculations in extract_kvec_to_sg Patch series "Fix bugs in extract_iter_to_sg()", v3. Fix bugs in the kvec and user variants of extract_iter_to_sg. This series is growing due to useful remarks made by sashiko.dev. The main bugs are: - The length for an sglist entry when extracting from a kvec can exceed the number of bytes in the page. This is obviously not intended. - When extracting a user buffer the sglist is temporarily used as a scratch buffer for extracted page pointers. If the sglist already contains some elements this scratch buffer could overlap with existing entries in the sglist. The series adds test cases to the kunit_iov_iter test that demonstrate all of these bugs. Additionally, there is a memory leak fix for the test itself. The bugs were orignally introduced into kernel v6.3 where the function lived in fs/netfs/iterator.c. It was later moved to lib/scatterlist.c in v6.5. Thus the actual fix is only marked for backports to v6.5+. This patch (of 5): When extracting from a kvec to a scatterlist, do not cross page boundaries. The required length was already calculated but not used as intended. Adjust the copied length if the loop runs out of sglist entries without extracting everything. While there, return immediately from extract_iter_to_sg if there are no sglist entries at all. A subsequent commit will add kunit test cases that demonstrate that the patch is necessary.Show less

In the Linux kernel, the following vulnerability has been resolved: of: unittest: fix use-after-free in of_unittest_changeset() The variable 'parent' is assigned the value of 'nchangeset' earlier in the function, meaning both point to the same struct device_node. The call to of_node_put(nchangeset) can decrement the reference count to zero and free the node if there are no other holders. After that, the code still uses 'parent' to check for the presence of a property and to read a string property, leading to a use-after-free. Fix this by moving the of_node_put() call after the last access to 'parent', avoiding the UAF.Show less

In the Linux kernel, the following vulnerability has been resolved: net: txgbe: fix RTNL assertion warning when remove module For the copper NIC with external PHY, the driver called phylink_connect_phy() during probe and phylink_disconnect_phy() during remove. It caused an RTNL assertion warning in phylink_disconnect_phy() upon module remove. To fix this, add rtnl_lock() and rtnl_unlock() around the phylink_disconnect_phy() in remove function. ------------[ cut here ]------------ RTNL: assertion failed at drivers/net/phy/phylink.c (2351) WARNING: drivers/net/phy/phylink.c:2351 at phylink_disconnect_phy+0xd8/0xf0 [phylink], CPU#0: rmmod/4464 Modules linked in: ... CPU: 0 UID: 0 PID: 4464 Comm: rmmod Kdump: loaded Not tainted 7.0.0-rc4+ Hardware name: Micro-Star International Co., Ltd. MS-7E16/X670E GAMING PLUS WIFI (MS-7E16), BIOS 1.90 12/31/2024 RIP: 0010:phylink_disconnect_phy+0xe4/0xf0 [phylink] Code: 5b 41 5c 41 5d 41 5e 41 5f 5d 31 c0 31 d2 31 f6 31 ff e9 3a 38 8f e7 48 8d 3d 48 87 e2 ff ba 2f 09 00 00 48 c7 c6 c1 22 24 c0 <67> 48 0f b9 3a e9 34 ff ff ff 66 90 90 90 90 90 90 90 90 90 90 90 RSP: 0018:ffffce7288363ac0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff89654b2a1a00 RCX: 0000000000000000 RDX: 000000000000092f RSI: ffffffffc02422c1 RDI: ffffffffc0239020 RBP: ffffce7288363ae8 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffff8964c4022000 R13: ffff89654fce3028 R14: ffff89654ebb4000 R15: ffffffffc0226348 FS: 0000795e80d93780(0000) GS:ffff896c52857000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005b528b592000 CR3: 0000000170d0f000 CR4: 0000000000f50ef0 PKRU: 55555554 Call Trace: <TASK> txgbe_remove_phy+0xbb/0xd0 [txgbe] txgbe_remove+0x4c/0xb0 [txgbe] pci_device_remove+0x41/0xb0 device_remove+0x43/0x80 device_release_driver_internal+0x206/0x270 driver_detach+0x4a/0xa0 bus_remove_driver+0x83/0x120 driver_unregister+0x2f/0x60 pci_unregister_driver+0x40/0x90 txgbe_driver_exit+0x10/0x850 [txgbe] __do_sys_delete_module.isra.0+0x1c3/0x2f0 __x64_sys_delete_module+0x12/0x20 x64_sys_call+0x20c3/0x2390 do_syscall_64+0x11c/0x1500 ? srso_alias_return_thunk+0x5/0xfbef5 ? do_syscall_64+0x15a/0x1500 ? srso_alias_return_thunk+0x5/0xfbef5 ? do_fault+0x312/0x580 ? srso_alias_return_thunk+0x5/0xfbef5 ? __handle_mm_fault+0x9d5/0x1040 ? srso_alias_return_thunk+0x5/0xfbef5 ? count_memcg_events+0x101/0x1d0 ? srso_alias_return_thunk+0x5/0xfbef5 ? handle_mm_fault+0x1e8/0x2f0 ? srso_alias_return_thunk+0x5/0xfbef5 ? do_user_addr_fault+0x2f8/0x820 ? srso_alias_return_thunk+0x5/0xfbef5 ? irqentry_exit+0xb2/0x600 ? srso_alias_return_thunk+0x5/0xfbef5 ? exc_page_fault+0x92/0x1c0 entry_SYSCALL_64_after_hwframe+0x76/0x7eShow less

In the Linux kernel, the following vulnerability has been resolved: leds: qcom-lpg: Check for array overflow when selecting the high resolution When selecting the high resolution values from the array, FIELD_GET() is used to pull from a 3 bit register, yet the array being indexed has only 5 values in it. Odds are the hardware is sane, but just to be safe, properly check before just overflowing and reading random data and then setting up chip values based on that.Show less

In the Linux kernel, the following vulnerability has been resolved: mtd: docg3: fix use-after-free in docg3_release() In docg3_release(), the docg3 pointer is obtained from cascade->floors[0]->priv before the loop that calls doc_release_device() on each floor. doc_release_device() frees the docg3 struct via kfree(docg3) at line 1881. After the loop, docg3->cascade->bch dereferences the already-freed pointer. Fix this by accessing cascade->bch directly, which is equivalent since docg3->cascade points back to the same cascade struct, and is already available as a local variable. This also removes the now-unused docg3 local variable.Show less

In the Linux kernel, the following vulnerability has been resolved: mm/hugetlb: fix early boot crash on parameters without '=' separator If hugepages, hugepagesz, or default_hugepagesz are specified on the kernel command line without the '=' separator, early parameter parsing passes NULL to hugetlb_add_param(), which dereferences it in strlen() and can crash the system during early boot. Reject NULL values in hugetlb_add_param() and return -EINVAL instead.Show less

In the Linux kernel, the following vulnerability has been resolved: tpm: Use kfree_sensitive() to free auth session in tpm_dev_release() tpm_dev_release() uses plain kfree() to free chip->auth, which contains sensitive cryptographic material including HMAC session keys, nonces, and passphrase data (struct tpm2_auth). Every other code path that frees this structure uses kfree_sensitive() to zero the memory before releasing it: both tpm2_end_auth_session() and tpm_buf_check_hmac_response() do so. The tpm_dev_release() path is the only one that does not, leaving key material in freed slab memory until it is eventually overwritten. Use kfree_sensitive() for consistency with the rest of the driver and to ensure session keys are scrubbed during device teardown.Show less

In the Linux kernel, the following vulnerability has been resolved: iio: frequency: admv1013: fix NULL pointer dereference on str When device_property_read_string() fails, str is left uninitialized but the code falls through to strcmp(str, ...), dereferencing a garbage pointer. Replace manual read/strcmp with device_property_match_property_string() and consolidate the SE mode enums into a single sequential enum, mapping to hardware register values via a switch consistent with other bitfields in the driver. Several cleanup patches have been applied to this driver recently so this will need a manual backport.Show less

In the Linux kernel, the following vulnerability has been resolved: vmalloc: fix buffer overflow in vrealloc_node_align() Commit 4c5d3365882d ("mm/vmalloc: allow to set node and align in vrealloc") added the ability to force a new allocation if the current pointer is on the wrong NUMA node, or if an alignment constraint is not met, even if the user is shrinking the allocation. On this path (need_realloc), the code allocates a new object of 'size' bytes and then memcpy()s 'old_size' bytes into it. If the request is to shrink the object (size < old_size), this results in an out-of-bounds write on the new buffer. Fix this by bounding the copy length by the new allocation size.Show less

In the Linux kernel, the following vulnerability has been resolved: lib: test_hmm: evict device pages on file close to avoid use-after-free Patch series "Minor hmm_test fixes and cleanups". Two bugfixes a cleanup for the HMM kernel selftests. These were mostly reported by Zenghui Yu with special thanks to Lorenzo for analysing and pointing out the problems. This patch (of 3): When dmirror_fops_release() is called it frees the dmirror struct but doesn't migrate device private pages back to system memory first. This leaves those pages with a dangling zone_device_data pointer to the freed dmirror. If a subsequent fault occurs on those pages (eg. during coredump) the dmirror_devmem_fault() callback dereferences the stale pointer causing a kernel panic. This was reported [1] when running mm/ksft_hmm.sh on arm64, where a test failure triggered SIGABRT and the resulting coredump walked the VMAs faulting in the stale device private pages. Fix this by calling dmirror_device_evict_chunk() for each devmem chunk in dmirror_fops_release() to migrate all device private pages back to system memory before freeing the dmirror struct. The function is moved earlier in the file to avoid a forward declaration.Show less

In the Linux kernel, the following vulnerability has been resolved: mm/alloc_tag: clear codetag for pages allocated before page_ext initialization Due to initialization ordering, page_ext is allocated and initialized relatively late during boot. Some pages have already been allocated and freed before page_ext becomes available, leaving their codetag uninitialized. A clear example is in init_section_page_ext(): alloc_page_ext() calls kmemleak_alloc(). If the slab cache has no free objects, it falls back to the buddy allocator to allocate memory. However, at this point page_ext is not yet fully initialized, so these newly allocated pages have no codetag set. These pages may later be reclaimed by KASAN, which causes the warning to trigger when they are freed because their codetag ref is still empty. Use a global array to track pages allocated before page_ext is fully initialized. The array size is fixed at 8192 entries, and will emit a warning if this limit is exceeded. When page_ext initialization completes, set their codetag to empty to avoid warnings when they are freed later. This warning is only observed with CONFIG_MEM_ALLOC_PROFILING_DEBUG=Y and mem_profiling_compressed disabled: [ 9.582133] ------------[ cut here ]------------ [ 9.582137] alloc_tag was not set [ 9.582139] WARNING: ./include/linux/alloc_tag.h:164 at __pgalloc_tag_sub+0x40f/0x550, CPU#5: systemd/1 [ 9.582190] CPU: 5 UID: 0 PID: 1 Comm: systemd Not tainted 7.0.0-rc4 #1 PREEMPT(lazy) [ 9.582192] Hardware name: Red Hat KVM, BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 [ 9.582194] RIP: 0010:__pgalloc_tag_sub+0x40f/0x550 [ 9.582196] Code: 00 00 4c 29 e5 48 8b 05 1f 88 56 05 48 8d 4c ad 00 48 8d 2c c8 e9 87 fd ff ff 0f 0b 0f 0b e9 f3 fe ff ff 48 8d 3d 61 2f ed 03 <67> 48 0f b9 3a e9 b3 fd ff ff 0f 0b eb e4 e8 5e cd 14 02 4c 89 c7 [ 9.582197] RSP: 0018:ffffc9000001f940 EFLAGS: 00010246 [ 9.582200] RAX: dffffc0000000000 RBX: 1ffff92000003f2b RCX: 1ffff110200d806c [ 9.582201] RDX: ffff8881006c0360 RSI: 0000000000000004 RDI: ffffffff9bc7b460 [ 9.582202] RBP: 0000000000000000 R08: 0000000000000000 R09: fffffbfff3a62324 [ 9.582203] R10: ffffffff9d311923 R11: 0000000000000000 R12: ffffea0004001b00 [ 9.582204] R13: 0000000000002000 R14: ffffea0000000000 R15: ffff8881006c0360 [ 9.582206] FS: 00007ffbbcf2d940(0000) GS:ffff888450479000(0000) knlGS:0000000000000000 [ 9.582208] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 9.582210] CR2: 000055ee3aa260d0 CR3: 0000000148b67005 CR4: 0000000000770ef0 [ 9.582211] PKRU: 55555554 [ 9.582212] Call Trace: [ 9.582213] <TASK> [ 9.582214] ? __pfx___pgalloc_tag_sub+0x10/0x10 [ 9.582216] ? check_bytes_and_report+0x68/0x140 [ 9.582219] __free_frozen_pages+0x2e4/0x1150 [ 9.582221] ? __free_slab+0xc2/0x2b0 [ 9.582224] qlist_free_all+0x4c/0xf0 [ 9.582227] kasan_quarantine_reduce+0x15d/0x180 [ 9.582229] __kasan_slab_alloc+0x69/0x90 [ 9.582232] kmem_cache_alloc_noprof+0x14a/0x500 [ 9.582234] do_getname+0x96/0x310 [ 9.582237] do_readlinkat+0x91/0x2f0 [ 9.582239] ? __pfx_do_readlinkat+0x10/0x10 [ 9.582240] ? get_random_bytes_user+0x1df/0x2c0 [ 9.582244] __x64_sys_readlinkat+0x96/0x100 [ 9.582246] do_syscall_64+0xce/0x650 [ 9.582250] ? __x64_sys_getrandom+0x13a/0x1e0 [ 9.582252] ? __pfx___x64_sys_getrandom+0x10/0x10 [ 9.582254] ? do_syscall_64+0x114/0x650 [ 9.582255] ? ksys_read+0xfc/0x1d0 [ 9.582258] ? __pfx_ksys_read+0x10/0x10 [ 9.582260] ? do_syscall_64+0x114/0x650 [ 9.582262] ? do_syscall_64+0x114/0x650 [ 9.582264] ? __pfx_fput_close_sync+0x10/0x10 [ 9.582266] ? file_close_fd_locked+0x178/0x2a0 [ 9.582268] ? __x64_sys_faccessat2+0x96/0x100 [ 9.582269] ? __x64_sys_close+0x7d/0xd0 [ 9.582271] ? do_syscall_64+0x114/0x650 [ 9.582273] ? do_syscall_64+0x114/0x650 [ 9.582275] ? clear_bhb_loop+0x50/0xa0 [ 9.582277] ? clear_bhb_l ---truncated---Show less

In the Linux kernel, the following vulnerability has been resolved: drm/imagination: Fix segfault when updating ftrace mask Fix invalid data access by passing right data for debugfs entry. [ 171.549793] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [ 171.559248] Mem abort info: [ 171.562173] ESR = 0x0000000096000044 [ 171.566227] EC = 0x25: DABT (current EL), IL = 32 bits [ 171.573108] SET = 0, FnV = 0 [ 171.576448] EA = 0, S1PTW = 0 [ 171.579745] FSC = 0x04: level 0 translation fault [ 171.584760] Data abort info: [ 171.588012] ISV = 0, ISS = 0x00000044, ISS2 = 0x00000000 [ 171.593734] CM = 0, WnR = 1, TnD = 0, TagAccess = 0 [ 171.598962] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 171.604471] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000083837000 [ 171.611358] [0000000000000000] pgd=0000000000000000, p4d=0000000000000000 [ 171.618500] Internal error: Oops: 0000000096000044 [#1] SMP [ 171.624222] Modules linked in: powervr drm_shmem_helper drm_gpuvm... [ 171.656580] CPU: 0 UID: 0 PID: 549 Comm: bash Not tainted 7.0.0-rc2-g730b257ba723-dirty #13 PREEMPT [ 171.665773] Hardware name: BeagleBoard.org BeaglePlay (DT) [ 171.671296] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 171.678306] pc : pvr_fw_trace_mask_set+0x78/0x154 [powervr] [ 171.683959] lr : pvr_fw_trace_mask_set+0x4c/0x154 [powervr] [ 171.689593] sp : ffff8000835ebb90 [ 171.692929] x29: ffff8000835ebc00 x28: ffff000005c60f80 x27: 0000000000000000 [ 171.700130] x26: 0000000000000000 x25: ffff00000504af28 x24: 0000000000000000 [ 171.707324] x23: ffff00000504af50 x22: 0000000000000203 x21: 0000000000000000 [ 171.714518] x20: ffff000005c44a80 x19: ffff000005c457b8 x18: 0000000000000000 [ 171.721715] x17: 0000000000000000 x16: 0000000000000000 x15: 0000aaaae8887580 [ 171.728908] x14: 0000000000000000 x13: 0000000000000000 x12: ffff8000835ebc30 [ 171.736095] x11: ffff00000504af2a x10: ffff00008504af29 x9 : 0fffffffffffffff [ 171.743286] x8 : ffff8000835ebbf8 x7 : 0000000000000000 x6 : 000000000000002a [ 171.750479] x5 : ffff00000504af2e x4 : 0000000000000000 x3 : 0000000000000010 [ 171.757674] x2 : 0000000000000203 x1 : 0000000000000000 x0 : ffff8000835ebba0 [ 171.764871] Call trace: [ 171.767342] pvr_fw_trace_mask_set+0x78/0x154 [powervr] (P) [ 171.772984] simple_attr_write_xsigned.isra.0+0xe0/0x19c [ 171.778341] simple_attr_write+0x18/0x24 [ 171.782296] debugfs_attr_write+0x50/0x98 [ 171.786341] full_proxy_write+0x6c/0xa8 [ 171.790208] vfs_write+0xd4/0x350 [ 171.793561] ksys_write+0x70/0x108 [ 171.796995] __arm64_sys_write+0x1c/0x28 [ 171.800952] invoke_syscall+0x48/0x10c [ 171.804740] el0_svc_common.constprop.0+0x40/0xe0 [ 171.809487] do_el0_svc+0x1c/0x28 [ 171.812834] el0_svc+0x34/0x108 [ 171.816013] el0t_64_sync_handler+0xa0/0xe4 [ 171.820237] el0t_64_sync+0x198/0x19c [ 171.823939] Code: 32000262 b90ac293 1a931056 9134e293 (b9000036) [ 171.830073] ---[ end trace 0000000000000000 ]---Show less

In the Linux kernel, the following vulnerability has been resolved: mm/zone_device: do not touch device folio after calling ->folio_free() The contents of a device folio can immediately change after calling ->folio_free(), as the folio may be reallocated by a driver with a different order. Instead of touching the folio again to extract the pgmap, use the local stack variable when calling percpu_ref_put_many().Show less

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix zero-size GDS range init on RDNA4 RDNA4 (GFX 12) hardware removes the GDS, GWS, and OA on-chip memory resources. The gfx_v12_0 initialisation code correctly leaves adev->gds.gds_size, adev->gds.gws_size, and adev->gds.oa_size at zero to reflect this. amdgpu_ttm_init() unconditionally calls amdgpu_ttm_init_on_chip() for each of these resources regardless of size. When the size is zero, amdgpu_ttm_init_on_chip() forwards the call to ttm_range_man_init(), which calls drm_mm_init(mm, 0, 0). drm_mm_init() immediately fires DRM_MM_BUG_ON(start + size <= start) -- trivially true when size is zero -- crashing the kernel during modprobe of amdgpu on an RX 9070 XT. Guard against this by returning 0 early from amdgpu_ttm_init_on_chip() when size_in_page is zero. This skips TTM resource manager registration for hardware resources that are absent, without affecting any other GPU type. DRM_MM_BUG_ON() only asserts if CONFIG_DRM_DEBUG_MM is enabled in the kernel config. This is apparently rarely enabled as these chips have been in the market for over a year and this issue was only reported now. Oops-Analysis: http://oops.fenrus.org/reports/bugzilla.korg/221376/report.html (cherry picked from commit 5719ce5865279cad4fd5f01011fe037168503f2d)Show less