Linux Kernel

In the Linux kernel, the following vulnerability has been resolved: comedi: das6402: Fix bit shift out of bounds When checking for a supported IRQ number, the following test is used: /* IRQs 2,3,5,6,7, 10,11,15 are valid for "enhanced" mode */ if ((1 << it->options[1]) & 0x8cec) { However, `it->options[i]` is an unchecked `int` value from userspace, so the shift amount could be negative or out of bounds. Fix the test by requiring `it->options[1]` to be within bounds before proceeding with the original test. Valid `it->options[1]` values that select the IRQ will be in the range [1,15]. The value 0 explicitly disables the use of interrupts.Show less

In the Linux kernel, the following vulnerability has been resolved: comedi: Fail COMEDI_INSNLIST ioctl if n_insns is too large The handling of the `COMEDI_INSNLIST` ioctl allocates a kernel buffer to hold the array of `struct comedi_insn`, getting the length from the `n_insns` member of the `struct comedi_insnlist` supplied by the user. The allocation will fail with a WARNING and a stack dump if it is too large. Avoid that by failing with an `-EINVAL` error if the supplied `n_insns` value is unreasonable. Define the limit on the `n_insns` value in the `MAX_INSNS` macro. Set this to the same value as `MAX_SAMPLES` (65536), which is the maximum allowed sum of the values of the member `n` in the array of `struct comedi_insn`, and sensible comedi instructions will have an `n` of at least 1.Show less

In the Linux kernel, the following vulnerability has been resolved: comedi: Fix use of uninitialized data in insn_rw_emulate_bits() For Comedi `INSN_READ` and `INSN_WRITE` instructions on "digital" subdevices (subdevice types `COMEDI_SUBD_DI`, `COMEDI_SUBD_DO`, and `COMEDI_SUBD_DIO`), it is common for the subdevice driver not to have `insn_read` and `insn_write` handler functions, but to have an `insn_bits` handler function for handling Comedi `INSN_BITS` instructions. In that case, the subdevice's `insn_read` and/or `insn_write` function handler pointers are set to point to the `insn_rw_emulate_bits()` function by `__comedi_device_postconfig()`. For `INSN_WRITE`, `insn_rw_emulate_bits()` currently assumes that the supplied `data[0]` value is a valid copy from user memory. It will at least exist because `do_insnlist_ioctl()` and `do_insn_ioctl()` in "comedi_fops.c" ensure at lease `MIN_SAMPLES` (16) elements are allocated. However, if `insn->n` is 0 (which is allowable for `INSN_READ` and `INSN_WRITE` instructions, then `data[0]` may contain uninitialized data, and certainly contains invalid data, possibly from a different instruction in the array of instructions handled by `do_insnlist_ioctl()`. This will result in an incorrect value being written to the digital output channel (or to the digital input/output channel if configured as an output), and may be reflected in the internal saved state of the channel. Fix it by returning 0 early if `insn->n` is 0, before reaching the code that accesses `data[0]`. Previously, the function always returned 1 on success, but it is supposed to be the number of data samples actually read or written up to `insn->n`, which is 0 in this case.Show less

In the Linux kernel, the following vulnerability has been resolved: comedi: Fix initialization of data for instructions that write to subdevice Some Comedi subdevice instruction handlers are known to access instruction data elements beyond the first `insn->n` elements in some cases. The `do_insn_ioctl()` and `do_insnlist_ioctl()` functions allocate at least `MIN_SAMPLES` (16) data elements to deal with this, but they do not initialize all of that. For Comedi instruction codes that write to the subdevice, the first `insn->n` data elements are copied from user-space, but the remaining elements are left uninitialized. That could be a problem if the subdevice instruction handler reads the uninitialized data. Ensure that the first `MIN_SAMPLES` elements are initialized before calling these instruction handlers, filling the uncopied elements with 0. For `do_insnlist_ioctl()`, the same data buffer elements are used for handling a list of instructions, so ensure the first `MIN_SAMPLES` elements are initialized for each instruction that writes to the subdevice.Show less

In the Linux kernel, the following vulnerability has been resolved: net/sched: sch_qfq: Fix race condition on qfq_aggregate A race condition can occur when 'agg' is modified in qfq_change_agg (called during qfq_enqueue) while other threads access it concurrently. For example, qfq_dump_class may trigger a NULL dereference, and qfq_delete_class may cause a use-after-free. This patch addresses the issue by: 1. Moved qfq_destroy_class into the critical section. 2. Added sch_tree_lock protection to qfq_dump_class and qfq_dump_class_stats.Show less

In the Linux kernel, the following vulnerability has been resolved: rpl: Fix use-after-free in rpl_do_srh_inline(). Running lwt_dst_cache_ref_loop.sh in selftest with KASAN triggers the splat below [0]. rpl_do_srh_inline() fetches ipv6_hdr(skb) and accesses it after skb_cow_head(), which is illegal as the header could be freed then. Let's fix it by making oldhdr to a local struct instead of a pointer. [0]: [root@fedora net]# ./lwt_dst_cache_ref_loop.sh ... TEST: rpl (input) [ 57.631529] ================================================================== BUG: KASAN: slab-use-after-free in rpl_do_srh_inline.isra.0 (net/ipv6/rpl_iptunnel.c:174) Read of size 40 at addr ffff888122bf96d8 by task ping6/1543 CPU: 50 UID: 0 PID: 1543 Comm: ping6 Not tainted 6.16.0-rc5-01302-gfadd1e6231b1 #23 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Call Trace: <IRQ> dump_stack_lvl (lib/dump_stack.c:122) print_report (mm/kasan/report.c:409 mm/kasan/report.c:521) kasan_report (mm/kasan/report.c:221 mm/kasan/report.c:636) kasan_check_range (mm/kasan/generic.c:175 (discriminator 1) mm/kasan/generic.c:189 (discriminator 1)) __asan_memmove (mm/kasan/shadow.c:94 (discriminator 2)) rpl_do_srh_inline.isra.0 (net/ipv6/rpl_iptunnel.c:174) rpl_input (net/ipv6/rpl_iptunnel.c:201 net/ipv6/rpl_iptunnel.c:282) lwtunnel_input (net/core/lwtunnel.c:459) ipv6_rcv (./include/net/dst.h:471 (discriminator 1) ./include/net/dst.h:469 (discriminator 1) net/ipv6/ip6_input.c:79 (discriminator 1) ./include/linux/netfilter.h:317 (discriminator 1) ./include/linux/netfilter.h:311 (discriminator 1) net/ipv6/ip6_input.c:311 (discriminator 1)) __netif_receive_skb_one_core (net/core/dev.c:5967) process_backlog (./include/linux/rcupdate.h:869 net/core/dev.c:6440) __napi_poll.constprop.0 (net/core/dev.c:7452) net_rx_action (net/core/dev.c:7518 net/core/dev.c:7643) handle_softirqs (kernel/softirq.c:579) do_softirq (kernel/softirq.c:480 (discriminator 20)) </IRQ> <TASK> __local_bh_enable_ip (kernel/softirq.c:407) __dev_queue_xmit (net/core/dev.c:4740) ip6_finish_output2 (./include/linux/netdevice.h:3358 ./include/net/neighbour.h:526 ./include/net/neighbour.h:540 net/ipv6/ip6_output.c:141) ip6_finish_output (net/ipv6/ip6_output.c:215 net/ipv6/ip6_output.c:226) ip6_output (./include/linux/netfilter.h:306 net/ipv6/ip6_output.c:248) ip6_send_skb (net/ipv6/ip6_output.c:1983) rawv6_sendmsg (net/ipv6/raw.c:588 net/ipv6/raw.c:918) __sys_sendto (net/socket.c:714 (discriminator 1) net/socket.c:729 (discriminator 1) net/socket.c:2228 (discriminator 1)) __x64_sys_sendto (net/socket.c:2231) do_syscall_64 (arch/x86/entry/syscall_64.c:63 (discriminator 1) arch/x86/entry/syscall_64.c:94 (discriminator 1)) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) RIP: 0033:0x7f68cffb2a06 Code: 5d e8 41 8b 93 08 03 00 00 59 5e 48 83 f8 fc 75 19 83 e2 39 83 fa 08 75 11 e8 26 ff ff ff 66 0f 1f 44 00 00 48 8b 45 10 0f 05 <48> 8b 5d f8 c9 c3 0f 1f 40 00 f3 0f 1e fa 55 48 89 e5 48 83 ec 08 RSP: 002b:00007ffefb7c53d0 EFLAGS: 00000202 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 0000564cd69f10a0 RCX: 00007f68cffb2a06 RDX: 0000000000000040 RSI: 0000564cd69f10a4 RDI: 0000000000000003 RBP: 00007ffefb7c53f0 R08: 0000564cd6a032ac R09: 000000000000001c R10: 0000000000000000 R11: 0000000000000202 R12: 0000564cd69f10a4 R13: 0000000000000040 R14: 00007ffefb7c66e0 R15: 0000564cd69f10a0 </TASK> Allocated by task 1543: kasan_save_stack (mm/kasan/common.c:48) kasan_save_track (mm/kasan/common.c:60 (discriminator 1) mm/kasan/common.c:69 (discriminator 1)) __kasan_slab_alloc (mm/kasan/common.c:319 mm/kasan/common.c:345) kmem_cache_alloc_node_noprof (./include/linux/kasan.h:250 mm/slub.c:4148 mm/slub.c:4197 mm/slub.c:4249) kmalloc_reserve (net/core/skbuff.c:581 (discriminator 88)) __alloc_skb (net/core/skbuff.c:669) __ip6_append_data (net/ipv6/ip6_output.c:1672 (discriminator 1)) ip6_ ---truncated---Show less

In the Linux kernel, the following vulnerability has been resolved: smc: Fix various oops due to inet_sock type confusion. syzbot reported weird splats [0][1] in cipso_v4_sock_setattr() while freeing inet_sk(sk)->inet_opt. The address was freed multiple times even though it was read-only memory. cipso_v4_sock_setattr() did nothing wrong, and the root cause was type confusion. The cited commit made it possible to create smc_sock as an INET socket. The issue is that struct smc_sock does not have struct inet_sock as the first member but hijacks AF_INET and AF_INET6 sk_family, which confuses various places. In this case, inet_sock.inet_opt was actually smc_sock.clcsk_data_ready(), which is an address of a function in the text segment. $ pahole -C inet_sock vmlinux struct inet_sock { ... struct ip_options_rcu * inet_opt; /* 784 8 */ $ pahole -C smc_sock vmlinux struct smc_sock { ... void (*clcsk_data_ready)(struct sock *); /* 784 8 */ The same issue for another field was reported before. [2][3] At that time, an ugly hack was suggested [4], but it makes both INET and SMC code error-prone and hard to change. Also, yet another variant was fixed by a hacky commit 98d4435efcbf3 ("net/smc: prevent NULL pointer dereference in txopt_get"). Instead of papering over the root cause by such hacks, we should not allow non-INET socket to reuse the INET infra. Let's add inet_sock as the first member of smc_sock. [0]: kvfree_call_rcu(): Double-freed call. rcu_head 000000006921da73 WARNING: CPU: 0 PID: 6718 at mm/slab_common.c:1956 kvfree_call_rcu+0x94/0x3f0 mm/slab_common.c:1955 Modules linked in: CPU: 0 UID: 0 PID: 6718 Comm: syz.0.17 Tainted: G W 6.16.0-rc4-syzkaller-g7482bb149b9f #0 PREEMPT Tainted: [W]=WARN Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025 pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : kvfree_call_rcu+0x94/0x3f0 mm/slab_common.c:1955 lr : kvfree_call_rcu+0x94/0x3f0 mm/slab_common.c:1955 sp : ffff8000a03a7730 x29: ffff8000a03a7730 x28: 00000000fffffff5 x27: 1fffe000184823d3 x26: dfff800000000000 x25: ffff0000c2411e9e x24: ffff0000dd88da00 x23: ffff8000891ac9a0 x22: 00000000ffffffea x21: ffff8000891ac9a0 x20: ffff8000891ac9a0 x19: ffff80008afc2480 x18: 00000000ffffffff x17: 0000000000000000 x16: ffff80008ae642c8 x15: ffff700011ede14c x14: 1ffff00011ede14c x13: 0000000000000004 x12: ffffffffffffffff x11: ffff700011ede14c x10: 0000000000ff0100 x9 : 5fa3c1ffaf0ff000 x8 : 5fa3c1ffaf0ff000 x7 : 0000000000000001 x6 : 0000000000000001 x5 : ffff8000a03a7078 x4 : ffff80008f766c20 x3 : ffff80008054d360 x2 : 0000000000000000 x1 : 0000000000000201 x0 : 0000000000000000 Call trace: kvfree_call_rcu+0x94/0x3f0 mm/slab_common.c:1955 (P) cipso_v4_sock_setattr+0x2f0/0x3f4 net/ipv4/cipso_ipv4.c:1914 netlbl_sock_setattr+0x240/0x334 net/netlabel/netlabel_kapi.c:1000 smack_netlbl_add+0xa8/0x158 security/smack/smack_lsm.c:2581 smack_inode_setsecurity+0x378/0x430 security/smack/smack_lsm.c:2912 security_inode_setsecurity+0x118/0x3c0 security/security.c:2706 __vfs_setxattr_noperm+0x174/0x5c4 fs/xattr.c:251 __vfs_setxattr_locked+0x1ec/0x218 fs/xattr.c:295 vfs_setxattr+0x158/0x2ac fs/xattr.c:321 do_setxattr fs/xattr.c:636 [inline] file_setxattr+0x1b8/0x294 fs/xattr.c:646 path_setxattrat+0x2ac/0x320 fs/xattr.c:711 __do_sys_fsetxattr fs/xattr.c:761 [inline] __se_sys_fsetxattr fs/xattr.c:758 [inline] __arm64_sys_fsetxattr+0xc0/0xdc fs/xattr.c:758 __invoke_syscall arch/arm64/kernel/syscall.c:35 [inline] invoke_syscall+0x98/0x2b8 arch/arm64/kernel/syscall.c:49 el0_svc_common+0x130/0x23c arch/arm64/kernel/syscall.c:132 do_el0_svc+0x48/0x58 arch/arm64/kernel/syscall.c:151 el0_svc+0x58/0x180 arch/arm64/kernel/entry-common.c:879 el0t_64_sync_handler+0x84/0x12c arch/arm64/kernel/entry-common.c:898 el0t_64_sync+0x198/0x19c arch/arm64/kernel/entry.S:600 [ ---truncated---Show less

In the Linux kernel, the following vulnerability has been resolved: usb: net: sierra: check for no status endpoint The driver checks for having three endpoints and having bulk in and out endpoints, but not that the third endpoint is interrupt input. Rectify the omission.Show less

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: Fix null-ptr-deref in l2cap_sock_resume_cb() syzbot reported null-ptr-deref in l2cap_sock_resume_cb(). [0] l2cap_sock_resume_cb() has a similar problem that was fixed by commit 1bff51ea59a9 ("Bluetooth: fix use-after-free error in lock_sock_nested()"). Since both l2cap_sock_kill() and l2cap_sock_resume_cb() are executed under l2cap_sock_resume_cb(), we can avoid the issue simply by checking if chan->data is NULL. Let's not access to the killed socket in l2cap_sock_resume_cb(). [0]: BUG: KASAN: null-ptr-deref in instrument_atomic_write include/linux/instrumented.h:82 [inline] BUG: KASAN: null-ptr-deref in clear_bit include/asm-generic/bitops/instrumented-atomic.h:41 [inline] BUG: KASAN: null-ptr-deref in l2cap_sock_resume_cb+0xb4/0x17c net/bluetooth/l2cap_sock.c:1711 Write of size 8 at addr 0000000000000570 by task kworker/u9:0/52 CPU: 1 UID: 0 PID: 52 Comm: kworker/u9:0 Not tainted 6.16.0-rc4-syzkaller-g7482bb149b9f #0 PREEMPT Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025 Workqueue: hci0 hci_rx_work Call trace: show_stack+0x2c/0x3c arch/arm64/kernel/stacktrace.c:501 (C) __dump_stack+0x30/0x40 lib/dump_stack.c:94 dump_stack_lvl+0xd8/0x12c lib/dump_stack.c:120 print_report+0x58/0x84 mm/kasan/report.c:524 kasan_report+0xb0/0x110 mm/kasan/report.c:634 check_region_inline mm/kasan/generic.c:-1 [inline] kasan_check_range+0x264/0x2a4 mm/kasan/generic.c:189 __kasan_check_write+0x20/0x30 mm/kasan/shadow.c:37 instrument_atomic_write include/linux/instrumented.h:82 [inline] clear_bit include/asm-generic/bitops/instrumented-atomic.h:41 [inline] l2cap_sock_resume_cb+0xb4/0x17c net/bluetooth/l2cap_sock.c:1711 l2cap_security_cfm+0x524/0xea0 net/bluetooth/l2cap_core.c:7357 hci_auth_cfm include/net/bluetooth/hci_core.h:2092 [inline] hci_auth_complete_evt+0x2e8/0xa4c net/bluetooth/hci_event.c:3514 hci_event_func net/bluetooth/hci_event.c:7511 [inline] hci_event_packet+0x650/0xe9c net/bluetooth/hci_event.c:7565 hci_rx_work+0x320/0xb18 net/bluetooth/hci_core.c:4070 process_one_work+0x7e8/0x155c kernel/workqueue.c:3238 process_scheduled_works kernel/workqueue.c:3321 [inline] worker_thread+0x958/0xed8 kernel/workqueue.c:3402 kthread+0x5fc/0x75c kernel/kthread.c:464 ret_from_fork+0x10/0x20 arch/arm64/kernel/entry.S:847Show less

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conntrack: fix crash due to removal of uninitialised entry A crash in conntrack was reported while trying to unlink the conntrack entry from the hash bucket list: [exception RIP: __nf_ct_delete_from_lists+172] [..] #7 [ff539b5a2b043aa0] nf_ct_delete at ffffffffc124d421 [nf_conntrack] #8 [ff539b5a2b043ad0] nf_ct_gc_expired at ffffffffc124d999 [nf_conntrack] #9 [ff539b5a2b043ae0] __nf_conntrack_find_get at ffffffffc124efbc [nf_conntrack] [..] The nf_conn struct is marked as allocated from slab but appears to be in a partially initialised state: ct hlist pointer is garbage; looks like the ct hash value (hence crash). ct->status is equal to IPS_CONFIRMED|IPS_DYING, which is expected ct->timeout is 30000 (=30s), which is unexpected. Everything else looks like normal udp conntrack entry. If we ignore ct->status and pretend its 0, the entry matches those that are newly allocated but not yet inserted into the hash: - ct hlist pointers are overloaded and store/cache the raw tuple hash - ct->timeout matches the relative time expected for a new udp flow rather than the absolute 'jiffies' value. If it were not for the presence of IPS_CONFIRMED, __nf_conntrack_find_get() would have skipped the entry. Theory is that we did hit following race: cpu x cpu y cpu z found entry E found entry E E is expired <preemption> nf_ct_delete() return E to rcu slab init_conntrack E is re-inited, ct->status set to 0 reply tuplehash hnnode.pprev stores hash value. cpu y found E right before it was deleted on cpu x. E is now re-inited on cpu z. cpu y was preempted before checking for expiry and/or confirm bit. ->refcnt set to 1 E now owned by skb ->timeout set to 30000 If cpu y were to resume now, it would observe E as expired but would skip E due to missing CONFIRMED bit. nf_conntrack_confirm gets called sets: ct->status |= CONFIRMED This is wrong: E is not yet added to hashtable. cpu y resumes, it observes E as expired but CONFIRMED: <resumes> nf_ct_expired() -> yes (ct->timeout is 30s) confirmed bit set. cpu y will try to delete E from the hashtable: nf_ct_delete() -> set DYING bit __nf_ct_delete_from_lists Even this scenario doesn't guarantee a crash: cpu z still holds the table bucket lock(s) so y blocks: wait for spinlock held by z CONFIRMED is set but there is no guarantee ct will be added to hash: "chaintoolong" or "clash resolution" logic both skip the insert step. reply hnnode.pprev still stores the hash value. unlocks spinlock return NF_DROP <unblocks, then crashes on hlist_nulls_del_rcu pprev> In case CPU z does insert the entry into the hashtable, cpu y will unlink E again right away but no crash occurs. Without 'cpu y' race, 'garbage' hlist is of no consequence: ct refcnt remains at 1, eventually skb will be free'd and E gets destroyed via: nf_conntrack_put -> nf_conntrack_destroy -> nf_ct_destroy. To resolve this, move the IPS_CONFIRMED assignment after the table insertion but before the unlock. Pablo points out that the confirm-bit-store could be reordered to happen before hlist add resp. the timeout fixup, so switch to set_bit and before_atomic memory barrier to prevent this. It doesn't matter if other CPUs can observe a newly inserted entry right before the CONFIRMED bit was set: Such event cannot be distinguished from above "E is the old incarnation" case: the entry will be skipped. Also change nf_ct_should_gc() to first check the confirmed bit. The gc sequence is: 1. Check if entry has expired, if not skip to next entry 2. Obtain a reference to the expired entry. 3. Call nf_ct_should_gc() to double-check step 1. nf_ct_should_gc() is thus called only for entries that already failed an expiry check. After this patch, once the confirmed bit check pas ---truncated---Show less

In the Linux kernel, the following vulnerability has been resolved: tls: always refresh the queue when reading sock After recent changes in net-next TCP compacts skbs much more aggressively. This unearthed a bug in TLS where we may try to operate on an old skb when checking if all skbs in the queue have matching decrypt state and geometry. BUG: KASAN: slab-use-after-free in tls_strp_check_rcv+0x898/0x9a0 [tls] (net/tls/tls_strp.c:436 net/tls/tls_strp.c:530 net/tls/tls_strp.c:544) Read of size 4 at addr ffff888013085750 by task tls/13529 CPU: 2 UID: 0 PID: 13529 Comm: tls Not tainted 6.16.0-rc5-virtme Call Trace: kasan_report+0xca/0x100 tls_strp_check_rcv+0x898/0x9a0 [tls] tls_rx_rec_wait+0x2c9/0x8d0 [tls] tls_sw_recvmsg+0x40f/0x1aa0 [tls] inet_recvmsg+0x1c3/0x1f0 Always reload the queue, fast path is to have the record in the queue when we wake, anyway (IOW the path going down "if !strp->stm.full_len").Show less

In the Linux kernel, the following vulnerability has been resolved: net: vlan: fix VLAN 0 refcount imbalance of toggling filtering during runtime Assuming the "rx-vlan-filter" feature is enabled on a net device, the 8021q module will automatically add or remove VLAN 0 when the net device is put administratively up or down, respectively. There are a couple of problems with the above scheme. The first problem is a memory leak that can happen if the "rx-vlan-filter" feature is disabled while the device is running: # ip link add bond1 up type bond mode 0 # ethtool -K bond1 rx-vlan-filter off # ip link del dev bond1 When the device is put administratively down the "rx-vlan-filter" feature is disabled, so the 8021q module will not remove VLAN 0 and the memory will be leaked [1]. Another problem that can happen is that the kernel can automatically delete VLAN 0 when the device is put administratively down despite not adding it when the device was put administratively up since during that time the "rx-vlan-filter" feature was disabled. null-ptr-unref or bug_on[2] will be triggered by unregister_vlan_dev() for refcount imbalance if toggling filtering during runtime: $ ip link add bond0 type bond mode 0 $ ip link add link bond0 name vlan0 type vlan id 0 protocol 802.1q $ ethtool -K bond0 rx-vlan-filter off $ ifconfig bond0 up $ ethtool -K bond0 rx-vlan-filter on $ ifconfig bond0 down $ ip link del vlan0 Root cause is as below: step1: add vlan0 for real_dev, such as bond, team. register_vlan_dev vlan_vid_add(real_dev,htons(ETH_P_8021Q),0) //refcnt=1 step2: disable vlan filter feature and enable real_dev step3: change filter from 0 to 1 vlan_device_event vlan_filter_push_vids ndo_vlan_rx_add_vid //No refcnt added to real_dev vlan0 step4: real_dev down vlan_device_event vlan_vid_del(dev, htons(ETH_P_8021Q), 0); //refcnt=0 vlan_info_rcu_free //free vlan0 step5: delete vlan0 unregister_vlan_dev BUG_ON(!vlan_info); //vlan_info is null Fix both problems by noting in the VLAN info whether VLAN 0 was automatically added upon NETDEV_UP and based on that decide whether it should be deleted upon NETDEV_DOWN, regardless of the state of the "rx-vlan-filter" feature. [1] unreferenced object 0xffff8880068e3100 (size 256): comm "ip", pid 384, jiffies 4296130254 hex dump (first 32 bytes): 00 20 30 0d 80 88 ff ff 00 00 00 00 00 00 00 00 . 0............. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace (crc 81ce31fa): __kmalloc_cache_noprof+0x2b5/0x340 vlan_vid_add+0x434/0x940 vlan_device_event.cold+0x75/0xa8 notifier_call_chain+0xca/0x150 __dev_notify_flags+0xe3/0x250 rtnl_configure_link+0x193/0x260 rtnl_newlink_create+0x383/0x8e0 __rtnl_newlink+0x22c/0xa40 rtnl_newlink+0x627/0xb00 rtnetlink_rcv_msg+0x6fb/0xb70 netlink_rcv_skb+0x11f/0x350 netlink_unicast+0x426/0x710 netlink_sendmsg+0x75a/0xc20 __sock_sendmsg+0xc1/0x150 ____sys_sendmsg+0x5aa/0x7b0 ___sys_sendmsg+0xfc/0x180 [2] kernel BUG at net/8021q/vlan.c:99! Oops: invalid opcode: 0000 [#1] SMP KASAN PTI CPU: 0 UID: 0 PID: 382 Comm: ip Not tainted 6.16.0-rc3 #61 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:unregister_vlan_dev (net/8021q/vlan.c:99 (discriminator 1)) RSP: 0018:ffff88810badf310 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff88810da84000 RCX: ffffffffb47ceb9a RDX: dffffc0000000000 RSI: 0000000000000008 RDI: ffff88810e8b43c8 RBP: 0000000000000000 R08: 0000000000000000 R09: fffffbfff6cefe80 R10: ffffffffb677f407 R11: ffff88810badf3c0 R12: ffff88810e8b4000 R13: 0000000000000000 R14: ffff88810642a5c0 R15: 000000000000017e FS: 00007f1ff68c20c0(0000) GS:ffff888163a24000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f1ff5dad240 CR3: 0000000107e56000 CR4: 00000000000006f0 Call Trace: <TASK ---truncated---Show less

In the Linux kernel, the following vulnerability has been resolved: KVM: x86/xen: Fix cleanup logic in emulation of Xen schedop poll hypercalls kvm_xen_schedop_poll does a kmalloc_array() when a VM polls the host for more than one event channel potr (nr_ports > 1). After the kmalloc_array(), the error paths need to go through the "out" label, but the call to kvm_read_guest_virt() does not. [Adjusted commit message. - Paolo]Show less

In the Linux kernel, the following vulnerability has been resolved: net/sched: Return NULL when htb_lookup_leaf encounters an empty rbtree htb_lookup_leaf has a BUG_ON that can trigger with the following: tc qdisc del dev lo root tc qdisc add dev lo root handle 1: htb default 1 tc class add dev lo parent 1: classid 1:1 htb rate 64bit tc qdisc add dev lo parent 1:1 handle 2: netem tc qdisc add dev lo parent 2:1 handle 3: blackhole ping -I lo -c1 -W0.001 127.0.0.1 The root cause is the following: 1. htb_dequeue calls htb_dequeue_tree which calls the dequeue handler on the selected leaf qdisc 2. netem_dequeue calls enqueue on the child qdisc 3. blackhole_enqueue drops the packet and returns a value that is not just NET_XMIT_SUCCESS 4. Because of this, netem_dequeue calls qdisc_tree_reduce_backlog, and since qlen is now 0, it calls htb_qlen_notify -> htb_deactivate -> htb_deactiviate_prios -> htb_remove_class_from_row -> htb_safe_rb_erase 5. As this is the only class in the selected hprio rbtree, __rb_change_child in __rb_erase_augmented sets the rb_root pointer to NULL 6. Because blackhole_dequeue returns NULL, netem_dequeue returns NULL, which causes htb_dequeue_tree to call htb_lookup_leaf with the same hprio rbtree, and fail the BUG_ON The function graph for this scenario is shown here: 0) | htb_enqueue() { 0) + 13.635 us | netem_enqueue(); 0) 4.719 us | htb_activate_prios(); 0) # 2249.199 us | } 0) | htb_dequeue() { 0) 2.355 us | htb_lookup_leaf(); 0) | netem_dequeue() { 0) + 11.061 us | blackhole_enqueue(); 0) | qdisc_tree_reduce_backlog() { 0) | qdisc_lookup_rcu() { 0) 1.873 us | qdisc_match_from_root(); 0) 6.292 us | } 0) 1.894 us | htb_search(); 0) | htb_qlen_notify() { 0) 2.655 us | htb_deactivate_prios(); 0) 6.933 us | } 0) + 25.227 us | } 0) 1.983 us | blackhole_dequeue(); 0) + 86.553 us | } 0) # 2932.761 us | qdisc_warn_nonwc(); 0) | htb_lookup_leaf() { 0) | BUG_ON(); ------------------------------------------ The full original bug report can be seen here [1]. We can fix this just by returning NULL instead of the BUG_ON, as htb_dequeue_tree returns NULL when htb_lookup_leaf returns NULL. [1] https://lore.kernel.org/netdev/pF5XOOIim0IuEfhI-SOxTgRvNoDwuux7UHKnE_Y5-zVd4wmGvNk2ceHjKb8ORnzw0cGwfmVu42g9dL7XyJLf1NEzaztboTWcm0Ogxuojoeo=@willsroot.io/Show less

In the Linux kernel, the following vulnerability has been resolved: drm/exynos: exynos7_drm_decon: add vblank check in IRQ handling If there's support for another console device (such as a TTY serial), the kernel occasionally panics during boot. The panic message and a relevant snippet of the call stack is as follows: Unable to handle kernel NULL pointer dereference at virtual address 000000000000000 Call trace: drm_crtc_handle_vblank+0x10/0x30 (P) decon_irq_handler+0x88/0xb4 [...] Otherwise, the panics don't happen. This indicates that it's some sort of race condition. Add a check to validate if the drm device can handle vblanks before calling drm_crtc_handle_vblank() to avoid this.Show less

In the Linux kernel, the following vulnerability has been resolved: perf: Revert to requiring CAP_SYS_ADMIN for uprobes Jann reports that uprobes can be used destructively when used in the middle of an instruction. The kernel only verifies there is a valid instruction at the requested offset, but due to variable instruction length cannot determine if this is an instruction as seen by the intended execution stream. Additionally, Mark Rutland notes that on architectures that mix data in the text segment (like arm64), a similar things can be done if the data word is 'mistaken' for an instruction. As such, require CAP_SYS_ADMIN for uprobes.Show less

In the Linux kernel, the following vulnerability has been resolved: netlink: Fix wraparounds of sk->sk_rmem_alloc. Netlink has this pattern in some places if (atomic_read(&sk->sk_rmem_alloc) > sk->sk_rcvbuf) atomic_add(skb->truesize, &sk->sk_rmem_alloc); , which has the same problem fixed by commit 5a465a0da13e ("udp: Fix multiple wraparounds of sk->sk_rmem_alloc."). For example, if we set INT_MAX to SO_RCVBUFFORCE, the condition is always false as the two operands are of int. Then, a single socket can eat as many skb as possible until OOM happens, and we can see multiple wraparounds of sk->sk_rmem_alloc. Let's fix it by using atomic_add_return() and comparing the two variables as unsigned int. Before: [root@fedora ~]# ss -f netlink Recv-Q Send-Q Local Address:Port Peer Address:Port -1668710080 0 rtnl:nl_wraparound/293 * After: [root@fedora ~]# ss -f netlink Recv-Q Send-Q Local Address:Port Peer Address:Port 2147483072 0 rtnl:nl_wraparound/290 * ^ `--- INT_MAX - 576Show less

In the Linux kernel, the following vulnerability has been resolved: tipc: Fix use-after-free in tipc_conn_close(). syzbot reported a null-ptr-deref in tipc_conn_close() during netns dismantle. [0] tipc_topsrv_stop() iterates tipc_net(net)->topsrv->conn_idr and calls tipc_conn_close() for each tipc_conn. The problem is that tipc_conn_close() is called after releasing the IDR lock. At the same time, there might be tipc_conn_recv_work() running and it could call tipc_conn_close() for the same tipc_conn and release its last ->kref. Once we release the IDR lock in tipc_topsrv_stop(), there is no guarantee that the tipc_conn is alive. Let's hold the ref before releasing the lock and put the ref after tipc_conn_close() in tipc_topsrv_stop(). [0]: BUG: KASAN: use-after-free in tipc_conn_close+0x122/0x140 net/tipc/topsrv.c:165 Read of size 8 at addr ffff888099305a08 by task kworker/u4:3/435 CPU: 0 PID: 435 Comm: kworker/u4:3 Not tainted 4.19.204-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: netns cleanup_net Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1fc/0x2ef lib/dump_stack.c:118 print_address_description.cold+0x54/0x219 mm/kasan/report.c:256 kasan_report_error.cold+0x8a/0x1b9 mm/kasan/report.c:354 kasan_report mm/kasan/report.c:412 [inline] __asan_report_load8_noabort+0x88/0x90 mm/kasan/report.c:433 tipc_conn_close+0x122/0x140 net/tipc/topsrv.c:165 tipc_topsrv_stop net/tipc/topsrv.c:701 [inline] tipc_topsrv_exit_net+0x27b/0x5c0 net/tipc/topsrv.c:722 ops_exit_list+0xa5/0x150 net/core/net_namespace.c:153 cleanup_net+0x3b4/0x8b0 net/core/net_namespace.c:553 process_one_work+0x864/0x1570 kernel/workqueue.c:2153 worker_thread+0x64c/0x1130 kernel/workqueue.c:2296 kthread+0x33f/0x460 kernel/kthread.c:259 ret_from_fork+0x24/0x30 arch/x86/entry/entry_64.S:415 Allocated by task 23: kmem_cache_alloc_trace+0x12f/0x380 mm/slab.c:3625 kmalloc include/linux/slab.h:515 [inline] kzalloc include/linux/slab.h:709 [inline] tipc_conn_alloc+0x43/0x4f0 net/tipc/topsrv.c:192 tipc_topsrv_accept+0x1b5/0x280 net/tipc/topsrv.c:470 process_one_work+0x864/0x1570 kernel/workqueue.c:2153 worker_thread+0x64c/0x1130 kernel/workqueue.c:2296 kthread+0x33f/0x460 kernel/kthread.c:259 ret_from_fork+0x24/0x30 arch/x86/entry/entry_64.S:415 Freed by task 23: __cache_free mm/slab.c:3503 [inline] kfree+0xcc/0x210 mm/slab.c:3822 tipc_conn_kref_release net/tipc/topsrv.c:150 [inline] kref_put include/linux/kref.h:70 [inline] conn_put+0x2cd/0x3a0 net/tipc/topsrv.c:155 process_one_work+0x864/0x1570 kernel/workqueue.c:2153 worker_thread+0x64c/0x1130 kernel/workqueue.c:2296 kthread+0x33f/0x460 kernel/kthread.c:259 ret_from_fork+0x24/0x30 arch/x86/entry/entry_64.S:415 The buggy address belongs to the object at ffff888099305a00 which belongs to the cache kmalloc-512 of size 512 The buggy address is located 8 bytes inside of 512-byte region [ffff888099305a00, ffff888099305c00) The buggy address belongs to the page: page:ffffea000264c140 count:1 mapcount:0 mapping:ffff88813bff0940 index:0x0 flags: 0xfff00000000100(slab) raw: 00fff00000000100 ffffea00028b6b88 ffffea0002cd2b08 ffff88813bff0940 raw: 0000000000000000 ffff888099305000 0000000100000006 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888099305900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff888099305980: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc >ffff888099305a00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff888099305a80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff888099305b00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fbShow less

In the Linux kernel, the following vulnerability has been resolved: tcp: Correct signedness in skb remaining space calculation Syzkaller reported a bug [1] where sk->sk_forward_alloc can overflow. When we send data, if an skb exists at the tail of the write queue, the kernel will attempt to append the new data to that skb. However, the code that checks for available space in the skb is flawed: ''' copy = size_goal - skb->len ''' The types of the variables involved are: ''' copy: ssize_t (s64 on 64-bit systems) size_goal: int skb->len: unsigned int ''' Due to C's type promotion rules, the signed size_goal is converted to an unsigned int to match skb->len before the subtraction. The result is an unsigned int. When this unsigned int result is then assigned to the s64 copy variable, it is zero-extended, preserving its non-negative value. Consequently, copy is always >= 0. Assume we are sending 2GB of data and size_goal has been adjusted to a value smaller than skb->len. The subtraction will result in copy holding a very large positive integer. In the subsequent logic, this large value is used to update sk->sk_forward_alloc, which can easily cause it to overflow. The syzkaller reproducer uses TCP_REPAIR to reliably create this condition. However, this can also occur in real-world scenarios. The tcp_bound_to_half_wnd() function can also reduce size_goal to a small value. This would cause the subsequent tcp_wmem_schedule() to set sk->sk_forward_alloc to a value close to INT_MAX. Further memory allocation requests would then cause sk_forward_alloc to wrap around and become negative. [1]: https://syzkaller.appspot.com/bug?extid=de6565462ab540f50e47Show less

In the Linux kernel, the following vulnerability has been resolved: vsock: Fix transport_{g2h,h2g} TOCTOU vsock_find_cid() and vsock_dev_do_ioctl() may race with module unload. transport_{g2h,h2g} may become NULL after the NULL check. Introduce vsock_transport_local_cid() to protect from a potential null-ptr-deref. KASAN: null-ptr-deref in range [0x0000000000000118-0x000000000000011f] RIP: 0010:vsock_find_cid+0x47/0x90 Call Trace: __vsock_bind+0x4b2/0x720 vsock_bind+0x90/0xe0 __sys_bind+0x14d/0x1e0 __x64_sys_bind+0x6e/0xc0 do_syscall_64+0x92/0x1c0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 KASAN: null-ptr-deref in range [0x0000000000000118-0x000000000000011f] RIP: 0010:vsock_dev_do_ioctl.isra.0+0x58/0xf0 Call Trace: __x64_sys_ioctl+0x12d/0x190 do_syscall_64+0x92/0x1c0 entry_SYSCALL_64_after_hwframe+0x4b/0x53Show less