Linux Kernel

In the Linux kernel, the following vulnerability has been resolved: drm/ttm: fix undefined behavior in bit shift for TTM_TT_FLAG_PRIV_POPULATED Shifting signed 32-bit value by 31 bits is undefined, so changing significant bit to unsigned. The UBSAN warning calltrace like below: UBSAN: shift-out-of-bounds in ./include/drm/ttm/ttm_tt.h:122:26 left shift of 1 by 31 places cannot be represented in type 'int' Call Trace: <TASK> dump_stack_lvl+0x7d/0xa5 dump_stack+0x15/0x1b ubsan_epilogue+0xe/0x4e __ubsan_handle_shift_out_of_bounds+0x1e7/0x20c ttm_bo_move_memcpy+0x3b4/0x460 [ttm] bo_driver_move+0x32/0x40 [drm_vram_helper] ttm_bo_handle_move_mem+0x118/0x200 [ttm] ttm_bo_validate+0xfa/0x220 [ttm] drm_gem_vram_pin_locked+0x70/0x1b0 [drm_vram_helper] drm_gem_vram_pin+0x48/0xb0 [drm_vram_helper] drm_gem_vram_plane_helper_prepare_fb+0x53/0xe0 [drm_vram_helper] drm_gem_vram_simple_display_pipe_prepare_fb+0x26/0x30 [drm_vram_helper] drm_simple_kms_plane_prepare_fb+0x4d/0xe0 [drm_kms_helper] drm_atomic_helper_prepare_planes+0xda/0x210 [drm_kms_helper] drm_atomic_helper_commit+0xc3/0x1e0 [drm_kms_helper] drm_atomic_commit+0x9c/0x160 [drm] drm_client_modeset_commit_atomic+0x33a/0x380 [drm] drm_client_modeset_commit_locked+0x77/0x220 [drm] drm_client_modeset_commit+0x31/0x60 [drm] __drm_fb_helper_restore_fbdev_mode_unlocked+0xa7/0x170 [drm_kms_helper] drm_fb_helper_set_par+0x51/0x90 [drm_kms_helper] fbcon_init+0x316/0x790 visual_init+0x113/0x1d0 do_bind_con_driver+0x2a3/0x5c0 do_take_over_console+0xa9/0x270 do_fbcon_takeover+0xa1/0x170 do_fb_registered+0x2a8/0x340 fbcon_fb_registered+0x47/0xe0 register_framebuffer+0x294/0x4a0 __drm_fb_helper_initial_config_and_unlock+0x43c/0x880 [drm_kms_helper] drm_fb_helper_initial_config+0x52/0x80 [drm_kms_helper] drm_fbdev_client_hotplug+0x156/0x1b0 [drm_kms_helper] drm_fbdev_generic_setup+0xfc/0x290 [drm_kms_helper] bochs_pci_probe+0x6ca/0x772 [bochs] local_pci_probe+0x4d/0xb0 pci_device_probe+0x119/0x320 really_probe+0x181/0x550 __driver_probe_device+0xc6/0x220 driver_probe_device+0x32/0x100 __driver_attach+0x195/0x200 bus_for_each_dev+0xbb/0x120 driver_attach+0x27/0x30 bus_add_driver+0x22e/0x2f0 driver_register+0xa9/0x190 __pci_register_driver+0x90/0xa0 bochs_pci_driver_init+0x52/0x1000 [bochs] do_one_initcall+0x76/0x430 do_init_module+0x61/0x28a load_module+0x1f82/0x2e50 __do_sys_finit_module+0xf8/0x190 __x64_sys_finit_module+0x23/0x30 do_syscall_64+0x58/0x80 entry_SYSCALL_64_after_hwframe+0x63/0xcd </TASK>Show less

In the Linux kernel, the following vulnerability has been resolved: tpm: tpm_crb: Add the missed acpi_put_table() to fix memory leak In crb_acpi_add(), we get the TPM2 table to retrieve information like start method, and then assign them to the priv data, so the TPM2 table is not used after the init, should be freed, call acpi_put_table() to fix the memory leak.Show less

In the Linux kernel, the following vulnerability has been resolved: nvme: fix multipath crash caused by flush request when blktrace is enabled The flush request initialized by blk_kick_flush has NULL bio, and it may be dealt with nvme_end_req during io completion. When blktrace is enabled, nvme_trace_bio_complete with multipath activated trying to access NULL pointer bio from flush request results in the following crash: [ 2517.831677] BUG: kernel NULL pointer dereference, address: 000000000000001a [ 2517.835213] #PF: supervisor read access in kernel mode [ 2517.838724] #PF: error_code(0x0000) - not-present page [ 2517.842222] PGD 7b2d51067 P4D 0 [ 2517.845684] Oops: 0000 [#1] SMP NOPTI [ 2517.849125] CPU: 2 PID: 732 Comm: kworker/2:1H Kdump: loaded Tainted: G S 5.15.67-0.cl9.x86_64 #1 [ 2517.852723] Hardware name: XFUSION 2288H V6/BC13MBSBC, BIOS 1.13 07/27/2022 [ 2517.856358] Workqueue: nvme_tcp_wq nvme_tcp_io_work [nvme_tcp] [ 2517.859993] RIP: 0010:blk_add_trace_bio_complete+0x6/0x30 [ 2517.863628] Code: 1f 44 00 00 48 8b 46 08 31 c9 ba 04 00 10 00 48 8b 80 50 03 00 00 48 8b 78 50 e9 e5 fe ff ff 0f 1f 44 00 00 41 54 49 89 f4 55 <0f> b6 7a 1a 48 89 d5 e8 3e 1c 2b 00 48 89 ee 4c 89 e7 5d 89 c1 ba [ 2517.871269] RSP: 0018:ff7f6a008d9dbcd0 EFLAGS: 00010286 [ 2517.875081] RAX: ff3d5b4be00b1d50 RBX: 0000000002040002 RCX: ff3d5b0a270f2000 [ 2517.878966] RDX: 0000000000000000 RSI: ff3d5b0b021fb9f8 RDI: 0000000000000000 [ 2517.882849] RBP: ff3d5b0b96a6fa00 R08: 0000000000000001 R09: 0000000000000000 [ 2517.886718] R10: 000000000000000c R11: 000000000000000c R12: ff3d5b0b021fb9f8 [ 2517.890575] R13: 0000000002000000 R14: ff3d5b0b021fb1b0 R15: 0000000000000018 [ 2517.894434] FS: 0000000000000000(0000) GS:ff3d5b42bfc80000(0000) knlGS:0000000000000000 [ 2517.898299] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 2517.902157] CR2: 000000000000001a CR3: 00000004f023e005 CR4: 0000000000771ee0 [ 2517.906053] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 2517.909930] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 2517.913761] PKRU: 55555554 [ 2517.917558] Call Trace: [ 2517.921294] <TASK> [ 2517.924982] nvme_complete_rq+0x1c3/0x1e0 [nvme_core] [ 2517.928715] nvme_tcp_recv_pdu+0x4d7/0x540 [nvme_tcp] [ 2517.932442] nvme_tcp_recv_skb+0x4f/0x240 [nvme_tcp] [ 2517.936137] ? nvme_tcp_recv_pdu+0x540/0x540 [nvme_tcp] [ 2517.939830] tcp_read_sock+0x9c/0x260 [ 2517.943486] nvme_tcp_try_recv+0x65/0xa0 [nvme_tcp] [ 2517.947173] nvme_tcp_io_work+0x64/0x90 [nvme_tcp] [ 2517.950834] process_one_work+0x1e8/0x390 [ 2517.954473] worker_thread+0x53/0x3c0 [ 2517.958069] ? process_one_work+0x390/0x390 [ 2517.961655] kthread+0x10c/0x130 [ 2517.965211] ? set_kthread_struct+0x40/0x40 [ 2517.968760] ret_from_fork+0x1f/0x30 [ 2517.972285] </TASK> To avoid this situation, add a NULL check for req->bio before calling trace_block_bio_complete.Show less

In the Linux kernel, the following vulnerability has been resolved: net: hinic: fix the issue of CMDQ memory leaks When hinic_set_cmdq_depth() fails in hinic_init_cmdqs(), the cmdq memory is not released correctly. Fix it.Show less

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: Fix user-after-free This uses l2cap_chan_hold_unless_zero() after calling __l2cap_get_chan_blah() to prevent the following trace: Bluetooth: l2cap_core.c:static void l2cap_chan_destroy(struct kref *kref) Bluetooth: chan 0000000023c4974d Bluetooth: parent 00000000ae861c08 ================================================================== BUG: KASAN: use-after-free in __mutex_waiter_is_first kernel/locking/mutex.c:191 [inline] BUG: KASAN: use-after-free in __mutex_lock_common kernel/locking/mutex.c:671 [inline] BUG: KASAN: use-after-free in __mutex_lock+0x278/0x400 kernel/locking/mutex.c:729 Read of size 8 at addr ffff888006a49b08 by task kworker/u3:2/389Show less

In the Linux kernel, the following vulnerability has been resolved: NFS: Fix an Oops in nfs_d_automount() When mounting from a NFSv4 referral, path->dentry can end up being a negative dentry, so derive the struct nfs_server from the dentry itself instead.Show less

In the Linux kernel, the following vulnerability has been resolved: staging: vme_user: Fix possible UAF in tsi148_dma_list_add Smatch report warning as follows: drivers/staging/vme_user/vme_tsi148.c:1757 tsi148_dma_list_add() warn: '&entry->list' not removed from list In tsi148_dma_list_add(), the error path "goto err_dma" will not remove entry->list from list->entries, but entry will be freed, then list traversal may cause UAF. Fix by removeing it from list->entries before free().Show less

In the Linux kernel, the following vulnerability has been resolved: media: mediatek: vcodec: Can't set dst buffer to done when lat decode error Core thread will call v4l2_m2m_buf_done to set dst buffer done for lat architecture. If lat call v4l2_m2m_buf_done_and_job_finish to free dst buffer when lat decode error, core thread will access kernel NULL pointer dereference, then crash.Show less

In the Linux kernel, the following vulnerability has been resolved: padata: Always leave BHs disabled when running ->parallel() A deadlock can happen when an overloaded system runs ->parallel() in the context of the current task: padata_do_parallel ->parallel() pcrypt_aead_enc/dec padata_do_serial spin_lock(&reorder->lock) // BHs still enabled <interrupt> ... __do_softirq ... padata_do_serial spin_lock(&reorder->lock) It's a bug for BHs to be on in _do_serial as Steffen points out, so ensure they're off in the "current task" case like they are in padata_parallel_worker to avoid this situation.Show less

In the Linux kernel, the following vulnerability has been resolved: md: fix a crash in mempool_free There's a crash in mempool_free when running the lvm test shell/lvchange-rebuild-raid.sh. The reason for the crash is this: * super_written calls atomic_dec_and_test(&mddev->pending_writes) and wake_up(&mddev->sb_wait). Then it calls rdev_dec_pending(rdev, mddev) and bio_put(bio). * so, the process that waited on sb_wait and that is woken up is racing with bio_put(bio). * if the process wins the race, it calls bioset_exit before bio_put(bio) is executed. * bio_put(bio) attempts to free a bio into a destroyed bio set - causing a crash in mempool_free. We fix this bug by moving bio_put before atomic_dec_and_test. We also move rdev_dec_pending before atomic_dec_and_test as suggested by Neil Brown. The function md_end_flush has a similar bug - we must call bio_put before we decrement the number of in-progress bios. BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 11557f0067 P4D 11557f0067 PUD 0 Oops: 0002 [#1] PREEMPT SMP CPU: 0 PID: 73 Comm: kworker/0:1 Not tainted 6.1.0-rc3 #5 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014 Workqueue: kdelayd flush_expired_bios [dm_delay] RIP: 0010:mempool_free+0x47/0x80 Code: 48 89 ef 5b 5d ff e0 f3 c3 48 89 f7 e8 32 45 3f 00 48 63 53 08 48 89 c6 3b 53 04 7d 2d 48 8b 43 10 8d 4a 01 48 89 df 89 4b 08 <48> 89 2c d0 e8 b0 45 3f 00 48 8d 7b 30 5b 5d 31 c9 ba 01 00 00 00 RSP: 0018:ffff88910036bda8 EFLAGS: 00010093 RAX: 0000000000000000 RBX: ffff8891037b65d8 RCX: 0000000000000001 RDX: 0000000000000000 RSI: 0000000000000202 RDI: ffff8891037b65d8 RBP: ffff8891447ba240 R08: 0000000000012908 R09: 00000000003d0900 R10: 0000000000000000 R11: 0000000000173544 R12: ffff889101a14000 R13: ffff8891562ac300 R14: ffff889102b41440 R15: ffffe8ffffa00d05 FS: 0000000000000000(0000) GS:ffff88942fa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000001102e99000 CR4: 00000000000006b0 Call Trace: <TASK> clone_endio+0xf4/0x1c0 [dm_mod] clone_endio+0xf4/0x1c0 [dm_mod] __submit_bio+0x76/0x120 submit_bio_noacct_nocheck+0xb6/0x2a0 flush_expired_bios+0x28/0x2f [dm_delay] process_one_work+0x1b4/0x300 worker_thread+0x45/0x3e0 ? rescuer_thread+0x380/0x380 kthread+0xc2/0x100 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x1f/0x30 </TASK> Modules linked in: brd dm_delay dm_raid dm_mod af_packet uvesafb cfbfillrect cfbimgblt cn cfbcopyarea fb font fbdev tun autofs4 binfmt_misc configfs ipv6 virtio_rng virtio_balloon rng_core virtio_net pcspkr net_failover failover qemu_fw_cfg button mousedev raid10 raid456 libcrc32c async_raid6_recov async_memcpy async_pq raid6_pq async_xor xor async_tx raid1 raid0 md_mod sd_mod t10_pi crc64_rocksoft crc64 virtio_scsi scsi_mod evdev psmouse bsg scsi_common [last unloaded: brd] CR2: 0000000000000000 ---[ end trace 0000000000000000 ]---Show less

In the Linux kernel, the following vulnerability has been resolved: mm: /proc/pid/smaps_rollup: fix no vma's null-deref Commit 258f669e7e88 ("mm: /proc/pid/smaps_rollup: convert to single value seq_file") introduced a null-deref if there are no vma's in the task in show_smaps_rollup.Show less

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix race between quota enable and quota rescan ioctl When enabling quotas, at btrfs_quota_enable(), after committing the transaction, we change fs_info->quota_root to point to the quota root we created and set BTRFS_FS_QUOTA_ENABLED at fs_info->flags. Then we try to start the qgroup rescan worker, first by initializing it with a call to qgroup_rescan_init() - however if that fails we end up freeing the quota root but we leave fs_info->quota_root still pointing to it, this can later result in a use-after-free somewhere else. We have previously set the flags BTRFS_FS_QUOTA_ENABLED and BTRFS_QGROUP_STATUS_FLAG_ON, so we can only fail with -EINPROGRESS at btrfs_quota_enable(), which is possible if someone already called the quota rescan ioctl, and therefore started the rescan worker. So fix this by ignoring an -EINPROGRESS and asserting we can't get any other error.Show less

In the Linux kernel, the following vulnerability has been resolved: drm/meson: reorder driver deinit sequence to fix use-after-free bug Unloading the driver triggers the following KASAN warning: [ +0.006275] ============================================================= [ +0.000029] BUG: KASAN: use-after-free in __list_del_entry_valid+0xe0/0x1a0 [ +0.000026] Read of size 8 at addr ffff000020c395e0 by task rmmod/2695 [ +0.000019] CPU: 5 PID: 2695 Comm: rmmod Tainted: G C O 5.19.0-rc6-lrmbkasan+ #1 [ +0.000013] Hardware name: Hardkernel ODROID-N2Plus (DT) [ +0.000008] Call trace: [ +0.000007] dump_backtrace+0x1ec/0x280 [ +0.000013] show_stack+0x24/0x80 [ +0.000008] dump_stack_lvl+0x98/0xd4 [ +0.000011] print_address_description.constprop.0+0x80/0x520 [ +0.000011] print_report+0x128/0x260 [ +0.000007] kasan_report+0xb8/0xfc [ +0.000008] __asan_report_load8_noabort+0x3c/0x50 [ +0.000010] __list_del_entry_valid+0xe0/0x1a0 [ +0.000009] drm_atomic_private_obj_fini+0x30/0x200 [drm] [ +0.000172] drm_bridge_detach+0x94/0x260 [drm] [ +0.000145] drm_encoder_cleanup+0xa4/0x290 [drm] [ +0.000144] drm_mode_config_cleanup+0x118/0x740 [drm] [ +0.000143] drm_mode_config_init_release+0x1c/0x2c [drm] [ +0.000144] drm_managed_release+0x170/0x414 [drm] [ +0.000142] drm_dev_put.part.0+0xc0/0x124 [drm] [ +0.000143] drm_dev_put+0x20/0x30 [drm] [ +0.000142] meson_drv_unbind+0x1d8/0x2ac [meson_drm] [ +0.000028] take_down_aggregate_device+0xb0/0x160 [ +0.000016] component_del+0x18c/0x360 [ +0.000009] meson_dw_hdmi_remove+0x28/0x40 [meson_dw_hdmi] [ +0.000015] platform_remove+0x64/0xb0 [ +0.000009] device_remove+0xb8/0x154 [ +0.000009] device_release_driver_internal+0x398/0x5b0 [ +0.000009] driver_detach+0xac/0x1b0 [ +0.000009] bus_remove_driver+0x158/0x29c [ +0.000009] driver_unregister+0x70/0xb0 [ +0.000008] platform_driver_unregister+0x20/0x2c [ +0.000008] meson_dw_hdmi_platform_driver_exit+0x1c/0x30 [meson_dw_hdmi] [ +0.000012] __do_sys_delete_module+0x288/0x400 [ +0.000011] __arm64_sys_delete_module+0x5c/0x80 [ +0.000009] invoke_syscall+0x74/0x260 [ +0.000009] el0_svc_common.constprop.0+0xcc/0x260 [ +0.000009] do_el0_svc+0x50/0x70 [ +0.000007] el0_svc+0x68/0x1a0 [ +0.000012] el0t_64_sync_handler+0x11c/0x150 [ +0.000008] el0t_64_sync+0x18c/0x190 [ +0.000018] Allocated by task 0: [ +0.000007] (stack is not available) [ +0.000011] Freed by task 2695: [ +0.000008] kasan_save_stack+0x2c/0x5c [ +0.000011] kasan_set_track+0x2c/0x40 [ +0.000008] kasan_set_free_info+0x28/0x50 [ +0.000009] ____kasan_slab_free+0x128/0x1d4 [ +0.000008] __kasan_slab_free+0x18/0x24 [ +0.000007] slab_free_freelist_hook+0x108/0x230 [ +0.000011] kfree+0x110/0x35c [ +0.000008] release_nodes+0xf0/0x16c [ +0.000009] devres_release_group+0x180/0x270 [ +0.000008] component_unbind+0x128/0x1e0 [ +0.000010] component_unbind_all+0x1b8/0x264 [ +0.000009] meson_drv_unbind+0x1a0/0x2ac [meson_drm] [ +0.000025] take_down_aggregate_device+0xb0/0x160 [ +0.000009] component_del+0x18c/0x360 [ +0.000009] meson_dw_hdmi_remove+0x28/0x40 [meson_dw_hdmi] [ +0.000012] platform_remove+0x64/0xb0 [ +0.000008] device_remove+0xb8/0x154 [ +0.000009] device_release_driver_internal+0x398/0x5b0 [ +0.000009] driver_detach+0xac/0x1b0 [ +0.000009] bus_remove_driver+0x158/0x29c [ +0.000008] driver_unregister+0x70/0xb0 [ +0.000008] platform_driver_unregister+0x20/0x2c [ +0.000008] meson_dw_hdmi_platform_driver_exit+0x1c/0x30 [meson_dw_hdmi] [ +0.000011] __do_sys_delete_module+0x288/0x400 [ +0.000010] __arm64_sys_delete_module+0x5c/0x80 [ +0.000008] invoke_syscall+0x74/0x260 [ +0.000008] el0_svc_common.constprop.0+0xcc/0x260 [ +0.000008] do_el0_svc+0x50/0x70 [ +0.000007] el0_svc+0x68/0x1a0 [ +0.000009] el0t_64_sync_handler+0x11c/0x150 [ +0.000009] el0t_64_sync+0x18c/0x190 [ +0.000014] The buggy address belongs to the object at ffff000020c39000 ---truncated---Show less

In the Linux kernel, the following vulnerability has been resolved: orangefs: Fix kmemleak in orangefs_{kernel,client}_debug_init() When insert and remove the orangefs module, there are memory leaked as below: unreferenced object 0xffff88816b0cc000 (size 2048): comm "insmod", pid 783, jiffies 4294813439 (age 65.512s) hex dump (first 32 bytes): 6e 6f 6e 65 0a 00 00 00 00 00 00 00 00 00 00 00 none............ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<0000000031ab7788>] kmalloc_trace+0x27/0xa0 [<000000005b405fee>] orangefs_debugfs_init.cold+0xaf/0x17f [<00000000e5a0085b>] 0xffffffffa02780f9 [<000000004232d9f7>] do_one_initcall+0x87/0x2a0 [<0000000054f22384>] do_init_module+0xdf/0x320 [<000000003263bdea>] load_module+0x2f98/0x3330 [<0000000052cd4153>] __do_sys_finit_module+0x113/0x1b0 [<00000000250ae02b>] do_syscall_64+0x35/0x80 [<00000000f11c03c7>] entry_SYSCALL_64_after_hwframe+0x46/0xb0 Use the golbal variable as the buffer rather than dynamic allocate to slove the problem.Show less

In the Linux kernel, the following vulnerability has been resolved: tty: serial: fsl_lpuart: disable dma rx/tx use flags in lpuart_dma_shutdown lpuart_dma_shutdown tears down lpuart dma, but lpuart_flush_buffer can still occur which in turn tries to access dma apis if lpuart_dma_tx_use flag is true. At this point since dma is torn down, these dma apis can abort. Set lpuart_dma_tx_use and the corresponding rx flag lpuart_dma_rx_use to false in lpuart_dma_shutdown so that dmas are not accessed after they are relinquished. Otherwise, when try to kill btattach, kernel may panic. This patch may fix this issue. root@imx8ulpevk:~# btattach -B /dev/ttyLP2 -S 115200 ^C[ 90.182296] Internal error: synchronous external abort: 96000210 [#1] PREEMPT SMP [ 90.189806] Modules linked in: moal(O) mlan(O) [ 90.194258] CPU: 0 PID: 503 Comm: btattach Tainted: G O 5.15.32-06136-g34eecdf2f9e4 #37 [ 90.203554] Hardware name: NXP i.MX8ULP 9X9 EVK (DT) [ 90.208513] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 90.215470] pc : fsl_edma3_disable_request+0x8/0x60 [ 90.220358] lr : fsl_edma3_terminate_all+0x34/0x20c [ 90.225237] sp : ffff800013f0bac0 [ 90.228548] x29: ffff800013f0bac0 x28: 0000000000000001 x27: ffff000008404800 [ 90.235681] x26: ffff000008404960 x25: ffff000008404a08 x24: ffff000008404a00 [ 90.242813] x23: ffff000008404a60 x22: 0000000000000002 x21: 0000000000000000 [ 90.249946] x20: ffff800013f0baf8 x19: ffff00000559c800 x18: 0000000000000000 [ 90.257078] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 [ 90.264211] x14: 0000000000000003 x13: 0000000000000000 x12: 0000000000000040 [ 90.271344] x11: ffff00000600c248 x10: ffff800013f0bb10 x9 : ffff000057bcb090 [ 90.278477] x8 : fffffc0000241a08 x7 : ffff00000534ee00 x6 : ffff000008404804 [ 90.285609] x5 : 0000000000000000 x4 : 0000000000000000 x3 : ffff0000055b3480 [ 90.292742] x2 : ffff8000135c0000 x1 : ffff00000534ee00 x0 : ffff00000559c800 [ 90.299876] Call trace: [ 90.302321] fsl_edma3_disable_request+0x8/0x60 [ 90.306851] lpuart_flush_buffer+0x40/0x160 [ 90.311037] uart_flush_buffer+0x88/0x120 [ 90.315050] tty_driver_flush_buffer+0x20/0x30 [ 90.319496] hci_uart_flush+0x44/0x90 [ 90.323162] +0x34/0x12c [ 90.327253] tty_ldisc_close+0x38/0x70 [ 90.331005] tty_ldisc_release+0xa8/0x190 [ 90.335018] tty_release_struct+0x24/0x8c [ 90.339022] tty_release+0x3ec/0x4c0 [ 90.342593] __fput+0x70/0x234 [ 90.345652] ____fput+0x14/0x20 [ 90.348790] task_work_run+0x84/0x17c [ 90.352455] do_exit+0x310/0x96c [ 90.355688] do_group_exit+0x3c/0xa0 [ 90.359259] __arm64_sys_exit_group+0x1c/0x20 [ 90.363609] invoke_syscall+0x48/0x114 [ 90.367362] el0_svc_common.constprop.0+0xd4/0xfc [ 90.372068] do_el0_svc+0x2c/0x94 [ 90.375379] el0_svc+0x28/0x80 [ 90.378438] el0t_64_sync_handler+0xa8/0x130 [ 90.382711] el0t_64_sync+0x1a0/0x1a4 [ 90.386376] Code: 17ffffda d503201f d503233f f9409802 (b9400041) [ 90.392467] ---[ end trace 2f60524b4a43f1f6 ]--- [ 90.397073] note: btattach[503] exited with preempt_count 1 [ 90.402636] Fixing recursive fault but reboot is needed!Show less

In the Linux kernel, the following vulnerability has been resolved: tracing: Fix race issue between cpu buffer write and swap Warning happened in rb_end_commit() at code: if (RB_WARN_ON(cpu_buffer, !local_read(&cpu_buffer->committing))) WARNING: CPU: 0 PID: 139 at kernel/trace/ring_buffer.c:3142 rb_commit+0x402/0x4a0 Call Trace: ring_buffer_unlock_commit+0x42/0x250 trace_buffer_unlock_commit_regs+0x3b/0x250 trace_event_buffer_commit+0xe5/0x440 trace_event_buffer_reserve+0x11c/0x150 trace_event_raw_event_sched_switch+0x23c/0x2c0 __traceiter_sched_switch+0x59/0x80 __schedule+0x72b/0x1580 schedule+0x92/0x120 worker_thread+0xa0/0x6f0 It is because the race between writing event into cpu buffer and swapping cpu buffer through file per_cpu/cpu0/snapshot: Write on CPU 0 Swap buffer by per_cpu/cpu0/snapshot on CPU 1 -------- -------- tracing_snapshot_write() [...] ring_buffer_lock_reserve() cpu_buffer = buffer->buffers[cpu]; // 1. Suppose find 'cpu_buffer_a'; [...] rb_reserve_next_event() [...] ring_buffer_swap_cpu() if (local_read(&cpu_buffer_a->committing)) goto out_dec; if (local_read(&cpu_buffer_b->committing)) goto out_dec; buffer_a->buffers[cpu] = cpu_buffer_b; buffer_b->buffers[cpu] = cpu_buffer_a; // 2. cpu_buffer has swapped here. rb_start_commit(cpu_buffer); if (unlikely(READ_ONCE(cpu_buffer->buffer) != buffer)) { // 3. This check passed due to 'cpu_buffer->buffer' [...] // has not changed here. return NULL; } cpu_buffer_b->buffer = buffer_a; cpu_buffer_a->buffer = buffer_b; [...] // 4. Reserve event from 'cpu_buffer_a'. ring_buffer_unlock_commit() [...] cpu_buffer = buffer->buffers[cpu]; // 5. Now find 'cpu_buffer_b' !!! rb_commit(cpu_buffer) rb_end_commit() // 6. WARN for the wrong 'committing' state !!! Based on above analysis, we can easily reproduce by following testcase: ``` bash #!/bin/bash dmesg -n 7 sysctl -w kernel.panic_on_warn=1 TR=/sys/kernel/tracing echo 7 > ${TR}/buffer_size_kb echo "sched:sched_switch" > ${TR}/set_event while [ true ]; do echo 1 > ${TR}/per_cpu/cpu0/snapshot done & while [ true ]; do echo 1 > ${TR}/per_cpu/cpu0/snapshot done & while [ true ]; do echo 1 > ${TR}/per_cpu/cpu0/snapshot done & ``` To fix it, IIUC, we can use smp_call_function_single() to do the swap on the target cpu where the buffer is located, so that above race would be avoided.Show less

In the Linux kernel, the following vulnerability has been resolved: accel/habanalabs: fix mem leak in capture user mappings This commit fixes a memory leak caused when clearing the user_mappings info when a new context is opened immediately after user_mapping is captured and a hard reset is performed.Show less

In the Linux kernel, the following vulnerability has been resolved: block: be a bit more careful in checking for NULL bdev while polling Wei reports a crash with an application using polled IO: PGD 14265e067 P4D 14265e067 PUD 47ec50067 PMD 0 Oops: 0000 [#1] SMP CPU: 0 PID: 21915 Comm: iocore_0 Kdump: loaded Tainted: G S 5.12.0-0_fbk12_clang_7346_g1bb6f2e7058f #1 Hardware name: Wiwynn Delta Lake MP T8/Delta Lake-Class2, BIOS Y3DLM08 04/10/2022 RIP: 0010:bio_poll+0x25/0x200 Code: 0f 1f 44 00 00 0f 1f 44 00 00 55 41 57 41 56 41 55 41 54 53 48 83 ec 28 65 48 8b 04 25 28 00 00 00 48 89 44 24 20 48 8b 47 08 <48> 8b 80 70 02 00 00 4c 8b 70 50 8b 6f 34 31 db 83 fd ff 75 25 65 RSP: 0018:ffffc90005fafdf8 EFLAGS: 00010292 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 74b43cd65dd66600 RDX: 0000000000000003 RSI: ffffc90005fafe78 RDI: ffff8884b614e140 RBP: ffff88849964df78 R08: 0000000000000000 R09: 0000000000000008 R10: 0000000000000000 R11: 0000000000000000 R12: ffff88849964df00 R13: ffffc90005fafe78 R14: ffff888137d3c378 R15: 0000000000000001 FS: 00007fd195000640(0000) GS:ffff88903f400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000270 CR3: 0000000466121001 CR4: 00000000007706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: iocb_bio_iopoll+0x1d/0x30 io_do_iopoll+0xac/0x250 __se_sys_io_uring_enter+0x3c5/0x5a0 ? __x64_sys_write+0x89/0xd0 do_syscall_64+0x2d/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x94f225d Code: 24 cc 00 00 00 41 8b 84 24 d0 00 00 00 c1 e0 04 83 e0 10 41 09 c2 8b 33 8b 53 04 4c 8b 43 18 4c 63 4b 0c b8 aa 01 00 00 0f 05 <85> c0 0f 88 85 00 00 00 29 03 45 84 f6 0f 84 88 00 00 00 41 f6 c7 RSP: 002b:00007fd194ffcd88 EFLAGS: 00000202 ORIG_RAX: 00000000000001aa RAX: ffffffffffffffda RBX: 00007fd194ffcdc0 RCX: 00000000094f225d RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000007 RBP: 00007fd194ffcdb0 R08: 0000000000000000 R09: 0000000000000008 R10: 0000000000000001 R11: 0000000000000202 R12: 00007fd269d68030 R13: 0000000000000000 R14: 0000000000000001 R15: 0000000000000000 which is due to bio->bi_bdev being NULL. This can happen if we have two tasks doing polled IO, and task B ends up completing IO from task A if they are sharing a poll queue. If task B completes the IO and puts the bio into our cache, then it can allocate that bio again before task A is done polling for it. As that would necessitate a preempt between the two tasks, it's enough to just be a bit more careful in checking for whether or not bio->bi_bdev is NULL.Show less

In the Linux kernel, the following vulnerability has been resolved: ip6mr: Fix skb_under_panic in ip6mr_cache_report() skbuff: skb_under_panic: text:ffffffff88771f69 len:56 put:-4 head:ffff88805f86a800 data:ffff887f5f86a850 tail:0x88 end:0x2c0 dev:pim6reg ------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:192! invalid opcode: 0000 [#1] PREEMPT SMP KASAN CPU: 2 PID: 22968 Comm: kworker/2:11 Not tainted 6.5.0-rc3-00044-g0a8db05b571a #236 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Workqueue: ipv6_addrconf addrconf_dad_work RIP: 0010:skb_panic+0x152/0x1d0 Call Trace: <TASK> skb_push+0xc4/0xe0 ip6mr_cache_report+0xd69/0x19b0 reg_vif_xmit+0x406/0x690 dev_hard_start_xmit+0x17e/0x6e0 __dev_queue_xmit+0x2d6a/0x3d20 vlan_dev_hard_start_xmit+0x3ab/0x5c0 dev_hard_start_xmit+0x17e/0x6e0 __dev_queue_xmit+0x2d6a/0x3d20 neigh_connected_output+0x3ed/0x570 ip6_finish_output2+0x5b5/0x1950 ip6_finish_output+0x693/0x11c0 ip6_output+0x24b/0x880 NF_HOOK.constprop.0+0xfd/0x530 ndisc_send_skb+0x9db/0x1400 ndisc_send_rs+0x12a/0x6c0 addrconf_dad_completed+0x3c9/0xea0 addrconf_dad_work+0x849/0x1420 process_one_work+0xa22/0x16e0 worker_thread+0x679/0x10c0 ret_from_fork+0x28/0x60 ret_from_fork_asm+0x11/0x20 When setup a vlan device on dev pim6reg, DAD ns packet may sent on reg_vif_xmit(). reg_vif_xmit() ip6mr_cache_report() skb_push(skb, -skb_network_offset(pkt));//skb_network_offset(pkt) is 4 And skb_push declared as: void *skb_push(struct sk_buff *skb, unsigned int len); skb->data -= len; //0xffff88805f86a84c - 0xfffffffc = 0xffff887f5f86a850 skb->data is set to 0xffff887f5f86a850, which is invalid mem addr, lead to skb_push() fails.Show less

In the Linux kernel, the following vulnerability has been resolved: regulator: da9063: better fix null deref with partial DT Two versions of the original patch were sent but V1 was merged instead of V2 due to a mistake. So update to V2. The advantage of V2 is that it completely avoids dereferencing the pointer, even just to take the address, which may fix problems with some compilers. Both versions work on my gcc 9.4 but use the safer one.Show less