Linux Kernel

In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Flush cache for PASID table before using it When writing the address of a freshly allocated zero-initialized PASID table to a PASID directory entry, do that after the CPU cache flush for this PASID table, not before it, to avoid the time window when this PASID table may be already used by non-coherent IOMMU hardware while its contents in RAM is still some random old data, not zero-initialized.Show less

In the Linux kernel, the following vulnerability has been resolved: gfs2: Fix slab-use-after-free in qd_put Commit a475c5dd16e5 ("gfs2: Free quota data objects synchronously") started freeing quota data objects during filesystem shutdown instead of putting them back onto the LRU list, but it failed to remove these objects from the LRU list, causing LRU list corruption. This caused use-after-free when the shrinker (gfs2_qd_shrink_scan) tried to access already-freed objects on the LRU list. Fix this by removing qd objects from the LRU list before freeing them in qd_put(). Initial fix from Deepanshu Kartikey <kartikey406@gmail.com>.Show less

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conncount: increase the connection clean up limit to 64 After the optimization to only perform one GC per jiffy, a new problem was introduced. If more than 8 new connections are tracked per jiffy the list won't be cleaned up fast enough possibly reaching the limit wrongly. In order to prevent this issue, only skip the GC if it was already triggered during the same jiffy and the increment is lower than the clean up limit. In addition, increase the clean up limit to 64 connections to avoid triggering GC too often and do more effective GCs. This has been tested using a HTTP server and several performance tools while having nft_connlimit/xt_connlimit or OVS limit configured. Output of slowhttptest + OVS limit at 52000 connections: slow HTTP test status on 340th second: initializing: 0 pending: 432 connected: 51998 error: 0 closed: 0 service available: YESShow less

In the Linux kernel, the following vulnerability has been resolved: netfilter: nfnetlink_queue: do shared-unconfirmed check before segmentation Ulrich reports a regression with nfqueue: If an application did not set the 'F_GSO' capability flag and a gso packet with an unconfirmed nf_conn entry is received all packets are now dropped instead of queued, because the check happens after skb_gso_segment(). In that case, we did have exclusive ownership of the skb and its associated conntrack entry. The elevated use count is due to skb_clone happening via skb_gso_segment(). Move the check so that its peformed vs. the aggregated packet. Then, annotate the individual segments except the first one so we can do a 2nd check at reinject time. For the normal case, where userspace does in-order reinjects, this avoids packet drops: first reinjected segment continues traversal and confirms entry, remaining segments observe the confirmed entry. While at it, simplify nf_ct_drop_unconfirmed(): We only care about unconfirmed entries with a refcnt > 1, there is no need to special-case dying entries. This only happens with UDP. With TCP, the only unconfirmed packet will be the TCP SYN, those aren't aggregated by GRO. Next patch adds a udpgro test case to cover this scenario.Show less

In the Linux kernel, the following vulnerability has been resolved: ext4: don't zero the entire extent if EXT4_EXT_DATA_PARTIAL_VALID1 When allocating initialized blocks from a large unwritten extent, or when splitting an unwritten extent during end I/O and converting it to initialized, there is currently a potential issue of stale data if the extent needs to be split in the middle. 0 A B N [UUUUUUUUUUUU] U: unwritten extent [--DDDDDDDD--] D: valid data |<- ->| ----> this range needs to be initialized ext4_split_extent() first try to split this extent at B with EXT4_EXT_DATA_ENTIRE_VALID1 and EXT4_EXT_MAY_ZEROOUT flag set, but ext4_split_extent_at() failed to split this extent due to temporary lack of space. It zeroout B to N and mark the entire extent from 0 to N as written. 0 A B N [WWWWWWWWWWWW] W: written extent [SSDDDDDDDDZZ] Z: zeroed, S: stale data ext4_split_extent() then try to split this extent at A with EXT4_EXT_DATA_VALID2 flag set. This time, it split successfully and left a stale written extent from 0 to A. 0 A B N [WW|WWWWWWWWWW] [SS|DDDDDDDDZZ] Fix this by pass EXT4_EXT_DATA_PARTIAL_VALID1 to ext4_split_extent_at() when splitting at B, don't convert the entire extent to written and left it as unwritten after zeroing out B to N. The remaining work is just like the standard two-part split. ext4_split_extent() will pass the EXT4_EXT_DATA_VALID2 flag when it calls ext4_split_extent_at() for the second time, allowing it to properly handle the split. If the split is successful, it will keep extent from 0 to A as unwritten.Show less

In the Linux kernel, the following vulnerability has been resolved: scsi: csiostor: Fix dereference of null pointer rn The error exit path when rn is NULL ends up deferencing the null pointer rn via the use of the macro CSIO_INC_STATS. Fix this by adding a new error return path label after the use of the macro to avoid the deference.Show less

In the Linux kernel, the following vulnerability has been resolved: RDMA/uverbs: Validate wqe_size before using it in ib_uverbs_post_send ib_uverbs_post_send() uses cmd.wqe_size from userspace without any validation before passing it to kmalloc() and using the allocated buffer as struct ib_uverbs_send_wr. If a user provides a small wqe_size value (e.g., 1), kmalloc() will succeed, but subsequent accesses to user_wr->opcode, user_wr->num_sge, and other fields will read beyond the allocated buffer, resulting in an out-of-bounds read from kernel heap memory. This could potentially leak sensitive kernel information to userspace. Additionally, providing an excessively large wqe_size can trigger a WARNING in the memory allocation path, as reported by syzkaller. This is inconsistent with ib_uverbs_unmarshall_recv() which properly validates that wqe_size >= sizeof(struct ib_uverbs_recv_wr) before proceeding. Add the same validation for ib_uverbs_post_send() to ensure wqe_size is at least sizeof(struct ib_uverbs_send_wr).Show less

In the Linux kernel, the following vulnerability has been resolved: ata: libata-scsi: avoid Non-NCQ command starvation When a non-NCQ command is issued while NCQ commands are being executed, ata_scsi_qc_issue() indicates to the SCSI layer that the command issuing should be deferred by returning SCSI_MLQUEUE_XXX_BUSY. This command deferring is correct and as mandated by the ACS specifications since NCQ and non-NCQ commands cannot be mixed. However, in the case of a host adapter using multiple submission queues, when the target device is under a constant load of NCQ commands, there are no guarantees that requeueing the non-NCQ command will be executed later and it may be deferred again repeatedly as other submission queues can constantly issue NCQ commands from different CPUs ahead of the non-NCQ command. This can lead to very long delays for the execution of non-NCQ commands, and even complete starvation for these commands in the worst case scenario. Since the block layer and the SCSI layer do not distinguish between queueable (NCQ) and non queueable (non-NCQ) commands, libata-scsi SAT implementation must ensure forward progress for non-NCQ commands in the presence of NCQ command traffic. This is similar to what SAS HBAs with a hardware/firmware based SAT implementation do. Implement such forward progress guarantee by limiting requeueing of non-NCQ commands from ata_scsi_qc_issue(): when a non-NCQ command is received and NCQ commands are in-flight, do not force a requeue of the non-NCQ command by returning SCSI_MLQUEUE_XXX_BUSY and instead return 0 to indicate that the command was accepted but hold on to the qc using the new deferred_qc field of struct ata_port. This deferred qc will be issued using the work item deferred_qc_work running the function ata_scsi_deferred_qc_work() once all in-flight commands complete, which is checked with the port qc_defer() callback return value indicating that no further delay is necessary. This check is done using the helper function ata_scsi_schedule_deferred_qc() which is called from ata_scsi_qc_complete(). This thus excludes this mechanism from all internal non-NCQ commands issued by ATA EH. When a port deferred_qc is non NULL, that is, the port has a command waiting for the device queue to drain, the issuing of all incoming commands (both NCQ and non-NCQ) is deferred using the regular busy mechanism. This simplifies the code and also avoids potential denial of service problems if a user issues too many non-NCQ commands. Finally, whenever ata EH is scheduled, regardless of the reason, a deferred qc is always requeued so that it can be retried once EH completes. This is done by calling the function ata_scsi_requeue_deferred_qc() from ata_eh_set_pending(). This avoids the need for any special processing for the deferred qc in case of NCQ error, link or device reset, or device timeout.Show less

In the Linux kernel, the following vulnerability has been resolved: crypto: inside-secure/eip93 - unregister only available algorithm EIP93 has an options register. This register indicates which crypto algorithms are implemented in silicon. Supported algorithms are registered on this basis. Unregister algorithms on the same basis. Currently, all algorithms are unregistered, even those not supported by HW. This results in panic on platforms that don't have all options implemented in silicon.Show less

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Use kvfree instead of kfree in amdgpu_gmc_get_nps_memranges() amdgpu_discovery_get_nps_info() internally allocates memory for ranges using kvcalloc(), which may use vmalloc() for large allocation. Using kfree() to release vmalloc memory will lead to a memory corruption. Use kvfree() to safely handle both kmalloc and vmalloc allocations. Compile tested only. Issue found using a prototype static analysis tool and code review.Show less

In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Fix double free in rxe_srq_from_init In rxe_srq_from_init(), the queue pointer 'q' is assigned to 'srq->rq.queue' before copying the SRQ number to user space. If copy_to_user() fails, the function calls rxe_queue_cleanup() to free the queue, but leaves the now-invalid pointer in 'srq->rq.queue'. The caller of rxe_srq_from_init() (rxe_create_srq) eventually calls rxe_srq_cleanup() upon receiving the error, which triggers a second rxe_queue_cleanup() on the same memory, leading to a double free. The call trace looks like this: kmem_cache_free+0x.../0x... rxe_queue_cleanup+0x1a/0x30 [rdma_rxe] rxe_srq_cleanup+0x42/0x60 [rdma_rxe] rxe_elem_release+0x31/0x70 [rdma_rxe] rxe_create_srq+0x12b/0x1a0 [rdma_rxe] ib_create_srq_user+0x9a/0x150 [ib_core] Fix this by moving 'srq->rq.queue = q' after copy_to_user.Show less

In the Linux kernel, the following vulnerability has been resolved: efi: Fix reservation of unaccepted memory table The reserve_unaccepted() function incorrectly calculates the size of the memblock reservation for the unaccepted memory table. It aligns the size of the table, but fails to account for cases where the table's starting physical address (efi.unaccepted) is not page-aligned. If the table starts at an offset within a page and its end crosses into a subsequent page that the aligned size does not cover, the end of the table will not be reserved. This can lead to the table being overwritten or inaccessible, causing a kernel panic in accept_memory(). This issue was observed when starting Intel TDX VMs with specific memory sizes (e.g., > 64GB). Fix this by calculating the end address first (including the unaligned start) and then aligning it up, ensuring the entire range is covered by the reservation.Show less

In the Linux kernel, the following vulnerability has been resolved: ipvs: skip ipv6 extension headers for csum checks Protocol checksum validation fails for IPv6 if there are extension headers before the protocol header. iph->len already contains its offset, so use it to fix the problem.Show less

In the Linux kernel, the following vulnerability has been resolved: net: mscc: ocelot: add missing lock protection in ocelot_port_xmit_inj() ocelot_port_xmit_inj() calls ocelot_can_inject() and ocelot_port_inject_frame() without holding the injection group lock. Both functions contain lockdep_assert_held() for the injection lock, and the correct caller felix_port_deferred_xmit() properly acquires the lock using ocelot_lock_inj_grp() before calling these functions. Add ocelot_lock_inj_grp()/ocelot_unlock_inj_grp() around the register injection path to fix the missing lock protection. The FDMA path is not affected as it uses its own locking mechanism.Show less

In the Linux kernel, the following vulnerability has been resolved: apparmor: fix NULL sock in aa_sock_file_perm Deal with the potential that sock and sock-sk can be NULL during socket setup or teardown. This could lead to an oops. The fix for NULL pointer dereference in __unix_needs_revalidation shows this is at least possible for af_unix sockets. While the fix for af_unix sockets applies for newer mediation this is still the fall back path for older af_unix mediation and other sockets, so ensure it is covered.Show less

In the Linux kernel, the following vulnerability has been resolved: net: remove WARN_ON_ONCE when accessing forward path array Although unlikely, recent support for IPIP tunnels increases chances of reaching this WARN_ON_ONCE if userspace manages to build a sufficiently long forward path. Remove it.Show less

In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: fix ntfs_mount_options leak in ntfs_fill_super() In ntfs_fill_super(), the fc->fs_private pointer is set to NULL without first freeing the memory it points to. This causes the subsequent call to ntfs_fs_free() to skip freeing the ntfs_mount_options structure. This results in a kmemleak report: unreferenced object 0xff1100015378b800 (size 32): comm "mount", pid 582, jiffies 4294890685 hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 ed ff ed ff 00 04 00 00 ................ backtrace (crc ed541d8c): __kmalloc_cache_noprof+0x424/0x5a0 __ntfs_init_fs_context+0x47/0x590 alloc_fs_context+0x5d8/0x960 __x64_sys_fsopen+0xb1/0x190 do_syscall_64+0x50/0x1f0 entry_SYSCALL_64_after_hwframe+0x76/0x7e This issue can be reproduced using the following commands: fallocate -l 100M test.file mount test.file /tmp/test Since sbi->options is duplicated from fc->fs_private and does not directly use the memory allocated for fs_private, it is unnecessary to set fc->fs_private to NULL. Additionally, this patch simplifies the code by utilizing the helper function put_mount_options() instead of open-coding the cleanup logic.Show less

In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: Initialize new folios before use KMSAN reports an uninitialized value in longest_match_std(), invoked from ntfs_compress_write(). When new folios are allocated without being marked uptodate and ni_read_frame() is skipped because the caller expects the frame to be completely overwritten, some reserved folios may remain only partially filled, leaving the rest memory uninitialized.Show less

In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: fix deadlock in ni_read_folio_cmpr Syzbot reported a task hung in ni_readpage_cmpr (now ni_read_folio_cmpr). This is caused by a lock inversion deadlock involving the inode mutex (ni_lock) and page locks. Scenario: 1. Task A enters ntfs_read_folio() for page X. It acquires ni_lock. 2. Task A calls ni_read_folio_cmpr(), which attempts to lock all pages in the compressed frame (including page Y). 3. Concurrently, Task B (e.g., via readahead) has locked page Y and calls ntfs_read_folio(). 4. Task B waits for ni_lock (held by A). 5. Task A waits for page Y lock (held by B). -> DEADLOCK. The fix is to restructure locking: do not take ni_lock in ntfs_read_folio(). Instead, acquire ni_lock inside ni_read_folio_cmpr() ONLY AFTER all required page locks for the frame have been successfully acquired. This restores the correct lock ordering (Page Lock -> ni_lock) consistent with VFS. [almaz.alexandrovich@paragon-software.com: ni_readpage_cmpr was renamed to ni_read_folio_cmpr]Show less

In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: Fix potential NULL pointer dereference in context cleanup aie_destroy_context() is invoked during error handling in aie2_create_context(). However, aie_destroy_context() assumes that the context's mailbox channel pointer is non-NULL. If mailbox channel creation fails, the pointer remains NULL and calling aie_destroy_context() can lead to a NULL pointer dereference. In aie2_create_context(), replace aie_destroy_context() with a function which request firmware to remove the context created previously.Show less